Brochure concreate
•
0 likes•250 views
Brochure about the award winning design software "Concreate"
Report
Share
Report
Share
Recommended
Steel Construction: Manual Design-examples
This document provides design examples for structural steel design using the 2010 AISC Specification for Structural Steel Buildings and the 14th Edition AISC Steel Construction Manual. The examples cover a range of structural members and connections, including tension members, compression members, flexural members, members under combined forces, composite members, and hollow structural section connections. The examples demonstrate both Load and Resistance Factor Design and Allowable Stress Design approaches.
Руководство по специфике архитектуры стального строительства
This document provides an overview and introduction to Architecturally Exposed Structural Steel (AESS). It discusses the evolution of AESS and the development of new CISC documents to better specify AESS, including this guide. The key factors that influence AESS categories are identified as form, fit and finish, viewing distance, coatings and connections. The guide is intended to help architects and other design professionals better understand and apply the new AESS specification documents.
Design with structural_steel_-_a_guide_for_architects
This document provides an overview of a guidebook for designing with structural steel. It includes sections on ideas, systems, details, materials and an appendix. The systems section covers basic structural engineering concepts like load flow, lateral load resisting systems, beam web penetrations, thermal movement of steel and floor vibration. It also includes an in-depth section on protecting structural steel with various coating systems and fire protection methods. The guide is intended to help architects better understand structural steel design and communicate more effectively with engineers.
[Construction E Book]
This document provides a guide for structurally designing residential buildings. It begins with an overview of conventional light-frame construction practices and materials used in American homes. It also discusses building codes, standards, and the role of design professionals. The document is organized into seven chapters that cover structural design concepts, applicable loads, foundation design, wood framing design, lateral resistance to wind and earthquakes, and connection design. The goal is to present both prescriptive and engineered methods for residential structural design.
Topology optimization to guide the architecture of a BIW structure, challenge...
For automotive industry, lightweight design is one of the five key factors among engine enhancement, aerodynamics, rolling resistance and energy management to overcome challenges due to environmental regulations. Thanks to new developments, recent models weigh 140 kg to 200 kg lighter than their predecessors. But to achieve more ambitious objectives in vehicle weight, structural design optimization is necessary at all stages of the design process. This presentation shows how topology optimization could be used very early to guide the body-in-white design and reach the best compromises between the vehicle performance expectations and the architecture constraints. We first remind how applying topology optimization for sheet metal design remains difficult. Then we explain the conditions for a success. The complete optimization process is detailed from the computation model building phase to the optimization results and their complex conversion into a design made from stamped or folded parts. Finally we conclude with a short summary about the topology optimization method and highlight some remained issues.
Speakers
Benoît Guillaume, Optimization expert, PSA Peugeot Citroën - Centre Technique de Vélizy A
Earthquake resistant construction
Those are all excellent questions to consider when designing earthquake-resistant buildings. Safety should be the top priority.
Setting up a Project Management Office (PMO)
This document provides an overview of setting up a Project Management Office (PMO). It discusses what a PMO is, why organizations need them, and the key components and structures of an effective PMO. A PMO sets standards, provides governance, and establishes processes to manage projects consistently. It aims to deliver projects efficiently and successfully while improving reporting, resource management, and alignment with organizational strategy. The document outlines the functional, structural, and disciplinary facets of a PMO and how they work interdependently. It also promotes accessing the full guide online for more details on PMO components, maturity levels, setup, and considerations.
Recommended
Steel Construction: Manual Design-examples
This document provides design examples for structural steel design using the 2010 AISC Specification for Structural Steel Buildings and the 14th Edition AISC Steel Construction Manual. The examples cover a range of structural members and connections, including tension members, compression members, flexural members, members under combined forces, composite members, and hollow structural section connections. The examples demonstrate both Load and Resistance Factor Design and Allowable Stress Design approaches.
Руководство по специфике архитектуры стального строительства
This document provides an overview and introduction to Architecturally Exposed Structural Steel (AESS). It discusses the evolution of AESS and the development of new CISC documents to better specify AESS, including this guide. The key factors that influence AESS categories are identified as form, fit and finish, viewing distance, coatings and connections. The guide is intended to help architects and other design professionals better understand and apply the new AESS specification documents.
Design with structural_steel_-_a_guide_for_architects
This document provides an overview of a guidebook for designing with structural steel. It includes sections on ideas, systems, details, materials and an appendix. The systems section covers basic structural engineering concepts like load flow, lateral load resisting systems, beam web penetrations, thermal movement of steel and floor vibration. It also includes an in-depth section on protecting structural steel with various coating systems and fire protection methods. The guide is intended to help architects better understand structural steel design and communicate more effectively with engineers.
[Construction E Book]
This document provides a guide for structurally designing residential buildings. It begins with an overview of conventional light-frame construction practices and materials used in American homes. It also discusses building codes, standards, and the role of design professionals. The document is organized into seven chapters that cover structural design concepts, applicable loads, foundation design, wood framing design, lateral resistance to wind and earthquakes, and connection design. The goal is to present both prescriptive and engineered methods for residential structural design.
Topology optimization to guide the architecture of a BIW structure, challenge...
For automotive industry, lightweight design is one of the five key factors among engine enhancement, aerodynamics, rolling resistance and energy management to overcome challenges due to environmental regulations. Thanks to new developments, recent models weigh 140 kg to 200 kg lighter than their predecessors. But to achieve more ambitious objectives in vehicle weight, structural design optimization is necessary at all stages of the design process. This presentation shows how topology optimization could be used very early to guide the body-in-white design and reach the best compromises between the vehicle performance expectations and the architecture constraints. We first remind how applying topology optimization for sheet metal design remains difficult. Then we explain the conditions for a success. The complete optimization process is detailed from the computation model building phase to the optimization results and their complex conversion into a design made from stamped or folded parts. Finally we conclude with a short summary about the topology optimization method and highlight some remained issues.
Speakers
Benoît Guillaume, Optimization expert, PSA Peugeot Citroën - Centre Technique de Vélizy A
Earthquake resistant construction
Those are all excellent questions to consider when designing earthquake-resistant buildings. Safety should be the top priority.
Setting up a Project Management Office (PMO)
This document provides an overview of setting up a Project Management Office (PMO). It discusses what a PMO is, why organizations need them, and the key components and structures of an effective PMO. A PMO sets standards, provides governance, and establishes processes to manage projects consistently. It aims to deliver projects efficiently and successfully while improving reporting, resource management, and alignment with organizational strategy. The document outlines the functional, structural, and disciplinary facets of a PMO and how they work interdependently. It also promotes accessing the full guide online for more details on PMO components, maturity levels, setup, and considerations.
What is new in IDEA StatiCa Concrete 21,21.1 and 22
This document summarizes new features in Concrete since version 21. It highlights improvements to fire resistance calculations for slender columns in RCS, updated stiffnesses and interaction checks, and improved crack width calculations in Detail. It also notes stability and functionality enhancements to Member for Concrete. New features in version 22 include auto-calculating self-weight, more detailed analysis results, a faster CSFM solver, and UI enhancements for easier work in Member.
1st block_BIM+NEWS in IDEA StatiCa Steel v22.0
BE SAFE, SAVE TIME, OPTIMIZE
IDEA StatiCa is software for steel connection design for all types of welded and bolted structural steel connections and base plates. It fastens your connection design process by:
The intuitive design of simple, moderate, and complex steel connections
Pass/fail results for 2D/3D, CHS/HSS steel connection as per AISC, EN etc.
250 ready-made templates, 10,000+ connection configurations
Ability to apply any loading for axial, shear and moment connections
The complete report including stiffness, seismicity, and buckling
General introduction of IDEA StatiCa Concrete 2022
DESIGN OF WALLS, BEAMS, AND CROSS-SECTIONS
IDEA StatiCa Concrete is a design software solution for all types of reinforced concrete cross-sections, beams, walls, diaphragms, frame joints, hangings, and brackets. It also provides code-checks of prestressed concrete members.
Design of simple as well as complex concrete details and cross-sections
Clear pass/fail results for any geometry, based on global building codes
Dozens of ready-made templates, import from DXF
Complete ULS/SLS checks, including cracks
IDEA STATICA FOR CONCRETE
Watch how IDEA StatiCa makes the concrete design visual. No matter the complexity of reinforcement or loading, you can design and code-check whatever your project requires. And get a comprehensive report which will prove it to everybody else. Need to deal with prestressing too? It has never been easier.
IDEA StatiCa Assemblages Acier
Un nouveau moyen de conceptualiser et vérifier tous les assemblages en acier selon la norme, en quelques minutes.
Checks for walls and details of concrete structures
Structural analysis and design of concrete structures is a challenging task – both because of
the natural complexity of the subject and because of the regulation an engineer has to
comply with to get the project done. The construction process has never been as fast as it is
today, and the pressure on cost-effectiveness of structures is growing with zero tolerance of
structural defects. In such an environment, engineers are pushed to work quicker, more
accurate and more reliably than ever before. And they need a different set of tools for that.
The development trend of IDEA StatiCa is to provide engineers with a generic, complete,
and easy-to-use solution for designing and dimensioning structural elements, cross-sections
and details in accordance with applicable standards. We believe that IDEA StatiCa Detail
provides a solution on the level of advanced non-linear programs, but at the same time it
will be commonly used for day-to-day practical design.
IDEA StatiCa Steel Connections v. 8.2 November 2017
Steel connection design Reinvented!
The first software in the world which can design and check all steel connections and joints. Clear pass/fail checks according to the code for welded and bolted connections, footing, and anchoring.
Release notes IDEA StatiCa steel v8 2
We are pleased to announce that a new version of IDEA StatiCa 8.2 has just been released!
The version 8.2 is full of new features. The anchoring has been extended for fully general cases, quick insertion of backing plates and lids, the new output report and much more. The brand new IDEA StatiCa Detail was released.
IDEA StatiCa steel version 8.2
This document provides an overview of new features in IDEA StatiCa 8.2, including:
1. Improved interoperability with BIM and CAD tools like Revit, Tekla, and Advance Steel through new links.
2. The ability to access and share designs through a cloud-based platform.
3. Support for additional national codes like Eurocode EN 1993-1-8, AISC, and CISC.
4. Enhancements to project documentation tools like the report generator.
5. New modeling capabilities for steel connection components in the CBFEM framework.
IDEA StatiCa steel connections
IDEA StatiCa introduces a novel way to design and check all steel connections and joints. With it, engineers can
break the limits of standard connection design tools to save time and optimize the material usage. Clear pass/fail
checks according to the code are available in minutes, as well as complete output reports.
IDEA StatiCa steel connections
IDEA StatiCa introduces a novel way to design and check all steel connections and joints. With it, engineers can
break the limits of standard connection design tools to save time and optimize the material usage. Clear pass/fail
checks according to the code are available in minutes, as well as complete output reports.
IDEA StatiCa Concrete details
IDEA StatiCa introduces a novel way to design and check concrete details and walls. With it, engineers can break
the limits of standard design tools to save time and optimize the material usage. Clear pass/fail checks according
to the code are available in minutes, as well as complete output reports.
IDEA StatiCa Concrete detail
IDEA StatiCa introduces a novel way to design and check concrete details and walls. With it, engineers can break
the limits of standard design tools to save time and optimize the material usage. Clear pass/fail checks according
to the code are available in minutes, as well as complete output reports.
Dlubal RFEM BNL klanten
RFEM België is de Belgische verdeler van het succesvolle rekenprogramma RFEM van Dlubal. In en buiten België bevinden zich inmiddels meer dan 6.000 berdrijven en 25.000 gebruikers van Dlubal software. Met RFEM kan men op een zeer eenvoudige en praktische wijze civiele, mechanische, bijzondere en bouwkundige constructies uitrekenen in verschillende materialen zoals staal, beton, hout, aluminium en glas. Met name de stabiliteit van het programma, de praktische uitwerking en de zeer gebruikersvriendelijke en compacte uitvoer in combinatie met de lage onderhoudskosten helpt veel ingenieursbureau's, aannemers en overheden helpen efficiënter, goedkoper en effectiever berekeningen uit te voeren. RFEM is beschikbaar in verschillende normen en talen waaronder de Belgische NBN-EN bijlagen en de Nederlands en Franse taal.
Thesis Dlubal RFEM EC3 Fire UHasselt 2017
Presentatie van studenten Industrieel Ingenieur Bouwkunde aan de KU Leuven / UHasselt over Dlubal RFEM met als doel te vergelijken met de Eurocode 1993 voor brand.
Eindwerk IDEA Steel Connection KU Leuven 2017
Presentatie van studenten Industrieel Ingenieur Bouwkunde aan de KU Leuven over IDEA Steel Connections met als doel te vergelijken met de Eurocode 1993-1-8
Concrete and prestressing made simple - IDEA StatiCa version 8
This document introduces the IDEA StatiCa software for structural engineering. It provides concise summaries of the key points:
1) IDEA StatiCa is structural design software developed by a team with 20 years experience, used for concrete cross sections, beams, joints and details. It complements CAE programs by focusing on structural elements.
2) The software allows complex structural members to be designed in under an hour, helping engineers comply with codes easily for both standard and non-standard beams.
3) IDEA StatiCa provides solutions for cast-in-place buildings, bridges, and prefabricated concrete through features like prestressing analysis, construction staging, and code checking.
Ifc certificate 2x3 Dlubal RSTAB & RFEM
Onlangs behaalden we het IFC 2x3 certficatie voor onze RFEM en RSTAB rekensoftware. Een belangrijke bevestiging dat we in de goed richting gaan met ons BIM-verhaal
Bim integration in Dlubal RFEM and RSTAB
Lees hier alles over de verschillende links die Dlubal software RFEM & RSTAB hebben met andere reken- en tekensoftware zoals Tekla and Revit.
Customer projects Dlubal RFEM RSTAB
Bekijk hier klanten projecten gemaakt met RFEM en RSTAB rekensoftware van Dlubal. Zowel beton, staal, hout en nog veel andere materialen worden gebruikt in de voorbeelden.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
More Related Content
More from Jo Gijbels
What is new in IDEA StatiCa Concrete 21,21.1 and 22
This document summarizes new features in Concrete since version 21. It highlights improvements to fire resistance calculations for slender columns in RCS, updated stiffnesses and interaction checks, and improved crack width calculations in Detail. It also notes stability and functionality enhancements to Member for Concrete. New features in version 22 include auto-calculating self-weight, more detailed analysis results, a faster CSFM solver, and UI enhancements for easier work in Member.
1st block_BIM+NEWS in IDEA StatiCa Steel v22.0
BE SAFE, SAVE TIME, OPTIMIZE
IDEA StatiCa is software for steel connection design for all types of welded and bolted structural steel connections and base plates. It fastens your connection design process by:
The intuitive design of simple, moderate, and complex steel connections
Pass/fail results for 2D/3D, CHS/HSS steel connection as per AISC, EN etc.
250 ready-made templates, 10,000+ connection configurations
Ability to apply any loading for axial, shear and moment connections
The complete report including stiffness, seismicity, and buckling
General introduction of IDEA StatiCa Concrete 2022
DESIGN OF WALLS, BEAMS, AND CROSS-SECTIONS
IDEA StatiCa Concrete is a design software solution for all types of reinforced concrete cross-sections, beams, walls, diaphragms, frame joints, hangings, and brackets. It also provides code-checks of prestressed concrete members.
Design of simple as well as complex concrete details and cross-sections
Clear pass/fail results for any geometry, based on global building codes
Dozens of ready-made templates, import from DXF
Complete ULS/SLS checks, including cracks
IDEA STATICA FOR CONCRETE
Watch how IDEA StatiCa makes the concrete design visual. No matter the complexity of reinforcement or loading, you can design and code-check whatever your project requires. And get a comprehensive report which will prove it to everybody else. Need to deal with prestressing too? It has never been easier.
IDEA StatiCa Assemblages Acier
Un nouveau moyen de conceptualiser et vérifier tous les assemblages en acier selon la norme, en quelques minutes.
Checks for walls and details of concrete structures
Structural analysis and design of concrete structures is a challenging task – both because of
the natural complexity of the subject and because of the regulation an engineer has to
comply with to get the project done. The construction process has never been as fast as it is
today, and the pressure on cost-effectiveness of structures is growing with zero tolerance of
structural defects. In such an environment, engineers are pushed to work quicker, more
accurate and more reliably than ever before. And they need a different set of tools for that.
The development trend of IDEA StatiCa is to provide engineers with a generic, complete,
and easy-to-use solution for designing and dimensioning structural elements, cross-sections
and details in accordance with applicable standards. We believe that IDEA StatiCa Detail
provides a solution on the level of advanced non-linear programs, but at the same time it
will be commonly used for day-to-day practical design.
IDEA StatiCa Steel Connections v. 8.2 November 2017
Steel connection design Reinvented!
The first software in the world which can design and check all steel connections and joints. Clear pass/fail checks according to the code for welded and bolted connections, footing, and anchoring.
Release notes IDEA StatiCa steel v8 2
We are pleased to announce that a new version of IDEA StatiCa 8.2 has just been released!
The version 8.2 is full of new features. The anchoring has been extended for fully general cases, quick insertion of backing plates and lids, the new output report and much more. The brand new IDEA StatiCa Detail was released.
IDEA StatiCa steel version 8.2
This document provides an overview of new features in IDEA StatiCa 8.2, including:
1. Improved interoperability with BIM and CAD tools like Revit, Tekla, and Advance Steel through new links.
2. The ability to access and share designs through a cloud-based platform.
3. Support for additional national codes like Eurocode EN 1993-1-8, AISC, and CISC.
4. Enhancements to project documentation tools like the report generator.
5. New modeling capabilities for steel connection components in the CBFEM framework.
IDEA StatiCa steel connections
IDEA StatiCa introduces a novel way to design and check all steel connections and joints. With it, engineers can
break the limits of standard connection design tools to save time and optimize the material usage. Clear pass/fail
checks according to the code are available in minutes, as well as complete output reports.
IDEA StatiCa steel connections
IDEA StatiCa introduces a novel way to design and check all steel connections and joints. With it, engineers can
break the limits of standard connection design tools to save time and optimize the material usage. Clear pass/fail
checks according to the code are available in minutes, as well as complete output reports.
IDEA StatiCa Concrete details
IDEA StatiCa introduces a novel way to design and check concrete details and walls. With it, engineers can break
the limits of standard design tools to save time and optimize the material usage. Clear pass/fail checks according
to the code are available in minutes, as well as complete output reports.
IDEA StatiCa Concrete detail
IDEA StatiCa introduces a novel way to design and check concrete details and walls. With it, engineers can break
the limits of standard design tools to save time and optimize the material usage. Clear pass/fail checks according
to the code are available in minutes, as well as complete output reports.
Dlubal RFEM BNL klanten
RFEM België is de Belgische verdeler van het succesvolle rekenprogramma RFEM van Dlubal. In en buiten België bevinden zich inmiddels meer dan 6.000 berdrijven en 25.000 gebruikers van Dlubal software. Met RFEM kan men op een zeer eenvoudige en praktische wijze civiele, mechanische, bijzondere en bouwkundige constructies uitrekenen in verschillende materialen zoals staal, beton, hout, aluminium en glas. Met name de stabiliteit van het programma, de praktische uitwerking en de zeer gebruikersvriendelijke en compacte uitvoer in combinatie met de lage onderhoudskosten helpt veel ingenieursbureau's, aannemers en overheden helpen efficiënter, goedkoper en effectiever berekeningen uit te voeren. RFEM is beschikbaar in verschillende normen en talen waaronder de Belgische NBN-EN bijlagen en de Nederlands en Franse taal.
Thesis Dlubal RFEM EC3 Fire UHasselt 2017
Presentatie van studenten Industrieel Ingenieur Bouwkunde aan de KU Leuven / UHasselt over Dlubal RFEM met als doel te vergelijken met de Eurocode 1993 voor brand.
Eindwerk IDEA Steel Connection KU Leuven 2017
Presentatie van studenten Industrieel Ingenieur Bouwkunde aan de KU Leuven over IDEA Steel Connections met als doel te vergelijken met de Eurocode 1993-1-8
Concrete and prestressing made simple - IDEA StatiCa version 8
This document introduces the IDEA StatiCa software for structural engineering. It provides concise summaries of the key points:
1) IDEA StatiCa is structural design software developed by a team with 20 years experience, used for concrete cross sections, beams, joints and details. It complements CAE programs by focusing on structural elements.
2) The software allows complex structural members to be designed in under an hour, helping engineers comply with codes easily for both standard and non-standard beams.
3) IDEA StatiCa provides solutions for cast-in-place buildings, bridges, and prefabricated concrete through features like prestressing analysis, construction staging, and code checking.
Ifc certificate 2x3 Dlubal RSTAB & RFEM
Onlangs behaalden we het IFC 2x3 certficatie voor onze RFEM en RSTAB rekensoftware. Een belangrijke bevestiging dat we in de goed richting gaan met ons BIM-verhaal
Bim integration in Dlubal RFEM and RSTAB
Lees hier alles over de verschillende links die Dlubal software RFEM & RSTAB hebben met andere reken- en tekensoftware zoals Tekla and Revit.
Customer projects Dlubal RFEM RSTAB
Bekijk hier klanten projecten gemaakt met RFEM en RSTAB rekensoftware van Dlubal. Zowel beton, staal, hout en nog veel andere materialen worden gebruikt in de voorbeelden.
More from Jo Gijbels (20)
What is new in IDEA StatiCa Concrete 21,21.1 and 22
What is new in IDEA StatiCa Concrete 21,21.1 and 22
General introduction of IDEA StatiCa Concrete 2022
General introduction of IDEA StatiCa Concrete 2022
Checks for walls and details of concrete structures
Checks for walls and details of concrete structures
IDEA StatiCa Steel Connections v. 8.2 November 2017
IDEA StatiCa Steel Connections v. 8.2 November 2017
Concrete and prestressing made simple - IDEA StatiCa version 8
Concrete and prestressing made simple - IDEA StatiCa version 8
Recently uploaded
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentationsClimate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Join us to introduce Milvus Lite, a vector database that can run on notebooks and laptops, share the same API with Milvus, and integrate with every popular GenAI framework. This webinar is perfect for developers seeking easy-to-use, well-integrated vector databases for their GenAI apps.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
20 Comprehensive Checklist of Designing and Developing a Website
Dive into the world of Website Designing and Developing with Pixlogix! Looking to create a stunning online presence? Look no further! Our comprehensive checklist covers everything you need to know to craft a website that stands out. From user-friendly design to seamless functionality, we've got you covered. Don't miss out on this invaluable resource! Check out our checklist now at Pixlogix and start your journey towards a captivating online presence today.
Recently uploaded (20)
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
20 Comprehensive Checklist of Designing and Developing a Website
20 Comprehensive Checklist of Designing and Developing a Website