Blue Team Presentation
•Download as PPT, PDF•
0 likes•493 views
The document discusses plans for a new school building called BSF that aims to be environmentally friendly. It proposes using materials like fly ash bricks and hemp insulation to reduce the building's carbon footprint. Ideas for power include a wind turbine, geothermal heating from the earth, and buying electricity from a waste plant. The design will include a living roof for insulation, resources, and education. The uniform will be made of durable, eco-friendly hemp. In summary, the document outlines the BSF building's goals of being green, sustainable, and teaching students about energy conservation.
Report
Share
Report
Share
Recommended
Red Team Final Presentation
The document summarizes the design of an eco-friendly learning center located in an unused police station building. Key aspects of the design include:
- Two connected buildings joined by a glass tube, with sitting areas on the roofs.
- Using energy efficient lighting, insulation, solar panels, water collection, and wind turbines to power the school in sustainable ways.
- Outdoor areas like a quiet area, tennis court, playground, and garden to promote learning outside.
- Green roofs on top of the buildings with solar panels and plants.
Maintenance-Lighting Presentation
This document discusses the history and evolution of electrical lighting, from Thomas Edison's incandescent lamp to modern LED lighting. It notes that while fluorescent tubes were an improvement over early incandescent bulbs, they contain mercury and have high disposal costs. The document also presents a case study showing that switching an office from fluorescent to LED lighting would save over £7,000 annually and pay for itself within 1.5 years, due to LEDs being more energy efficient and having lower maintenance costs over their lifespan. A large project is planned to replace lighting in several areas of a building with LEDs at an estimated cost of £150,000.
energy conservation / how to conserve/ save energy
please open your hearts and give likes i will thank you if you will give me likes i am saksham kaushal i read in KIIT world school in delhi , india i am a student of class 6the if you see any changes in ppt please mail me at sakshamsci7@gmail.com and if you need any help mail me at same please please please please please please please please give more and more like so that i can upload more ppt thanks to all those you had given likes to tell your friends and give me more and more likes thankssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss to allllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllll those have givennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn meeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
likessssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss
Energy conservation
There are two main categories of energy: renewable and non-renewable. Renewable energy sources like solar, wind, and hydro can be continuously generated without depletion, while non-renewable sources like fossil fuels are finite. It is important to conserve energy because demand is increasing while fuel sources are limited and will eventually be depleted. Small actions like switching off lights when not in use, using public transport, and purchasing energy efficient appliances can help reduce energy consumption and prolong our remaining fuel reserves.
Ppt onsave energy
This document discusses energy conservation and provides tips for saving energy. It begins by defining energy as the ability to do work, and notes that energy lights cities, powers vehicles and more. It then explains that energy resources are limited on Earth and demands are increasing, so conservation is important. Some ways to conserve mentioned include recycling, turning off unused devices, and replacing old light bulbs with energy efficient ones. Specific energy saving tips are provided for both home and public settings. The document emphasizes that conservation will help save money and reduce pollution by saving energy. It provides an example showing potential annual savings from replacing a light bulb. Overall, the document promotes energy conservation through various everyday practices.
Save energy - save future - save earth
This document discusses energy conservation and provides tips for saving energy. It begins by defining energy as the ability to do work, and notes that energy lights cities, powers vehicles and more. It then explains that we need to conserve energy because resources are limited and demands are increasing. Some ways to conserve mentioned include recycling, turning off unused devices, and replacing old light bulbs with energy efficient ones. Specific energy saving tips are provided for both home and public settings. The document emphasizes that conserving energy will save money and resources while reducing pollution. It provides an example of annual savings from replacing a light bulb. Overall, the document promotes energy conservation through various everyday practices.
Energy conservation
This document discusses energy conservation and various energy sources. It notes how people historically used energy sources like water, wind and burning wood. With the Industrial Revolution, fossil fuels like coal, oil and gas became primary energy sources but are non-renewable. To avoid depleting fossil fuel reserves, it is important to conserve energy and explore renewable alternatives like solar, wind, hydroelectric and geothermal. Individuals can help by insulating homes, using appliances efficiently, and carpooling or taking public transportation.
Ppt energy concervation
Energy conservation is important for several reasons. First, we have limited non-renewable energy resources on Earth and demands are increasing daily. Second, conserving energy saves money and reduces pollution. Third, switching to more efficient options and renewable resources like solar, wind, and hydro can help meet rising demands and lessen the impact on existing supplies. Some tips for conserving energy include recycling products, turning off unused devices, replacing old light bulbs with efficient LED bulbs, and improving insulation and efficiency of home appliances. Widespread conservation efforts can significantly reduce costs and energy imports over time.
Recommended
Red Team Final Presentation
The document summarizes the design of an eco-friendly learning center located in an unused police station building. Key aspects of the design include:
- Two connected buildings joined by a glass tube, with sitting areas on the roofs.
- Using energy efficient lighting, insulation, solar panels, water collection, and wind turbines to power the school in sustainable ways.
- Outdoor areas like a quiet area, tennis court, playground, and garden to promote learning outside.
- Green roofs on top of the buildings with solar panels and plants.
Maintenance-Lighting Presentation
This document discusses the history and evolution of electrical lighting, from Thomas Edison's incandescent lamp to modern LED lighting. It notes that while fluorescent tubes were an improvement over early incandescent bulbs, they contain mercury and have high disposal costs. The document also presents a case study showing that switching an office from fluorescent to LED lighting would save over £7,000 annually and pay for itself within 1.5 years, due to LEDs being more energy efficient and having lower maintenance costs over their lifespan. A large project is planned to replace lighting in several areas of a building with LEDs at an estimated cost of £150,000.
energy conservation / how to conserve/ save energy
please open your hearts and give likes i will thank you if you will give me likes i am saksham kaushal i read in KIIT world school in delhi , india i am a student of class 6the if you see any changes in ppt please mail me at sakshamsci7@gmail.com and if you need any help mail me at same please please please please please please please please give more and more like so that i can upload more ppt thanks to all those you had given likes to tell your friends and give me more and more likes thankssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss to allllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllll those have givennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn meeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
likessssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss
Energy conservation
There are two main categories of energy: renewable and non-renewable. Renewable energy sources like solar, wind, and hydro can be continuously generated without depletion, while non-renewable sources like fossil fuels are finite. It is important to conserve energy because demand is increasing while fuel sources are limited and will eventually be depleted. Small actions like switching off lights when not in use, using public transport, and purchasing energy efficient appliances can help reduce energy consumption and prolong our remaining fuel reserves.
Ppt onsave energy
This document discusses energy conservation and provides tips for saving energy. It begins by defining energy as the ability to do work, and notes that energy lights cities, powers vehicles and more. It then explains that energy resources are limited on Earth and demands are increasing, so conservation is important. Some ways to conserve mentioned include recycling, turning off unused devices, and replacing old light bulbs with energy efficient ones. Specific energy saving tips are provided for both home and public settings. The document emphasizes that conservation will help save money and reduce pollution by saving energy. It provides an example showing potential annual savings from replacing a light bulb. Overall, the document promotes energy conservation through various everyday practices.
Save energy - save future - save earth
This document discusses energy conservation and provides tips for saving energy. It begins by defining energy as the ability to do work, and notes that energy lights cities, powers vehicles and more. It then explains that we need to conserve energy because resources are limited and demands are increasing. Some ways to conserve mentioned include recycling, turning off unused devices, and replacing old light bulbs with energy efficient ones. Specific energy saving tips are provided for both home and public settings. The document emphasizes that conserving energy will save money and resources while reducing pollution. It provides an example of annual savings from replacing a light bulb. Overall, the document promotes energy conservation through various everyday practices.
Energy conservation
This document discusses energy conservation and various energy sources. It notes how people historically used energy sources like water, wind and burning wood. With the Industrial Revolution, fossil fuels like coal, oil and gas became primary energy sources but are non-renewable. To avoid depleting fossil fuel reserves, it is important to conserve energy and explore renewable alternatives like solar, wind, hydroelectric and geothermal. Individuals can help by insulating homes, using appliances efficiently, and carpooling or taking public transportation.
Ppt energy concervation
Energy conservation is important for several reasons. First, we have limited non-renewable energy resources on Earth and demands are increasing daily. Second, conserving energy saves money and reduces pollution. Third, switching to more efficient options and renewable resources like solar, wind, and hydro can help meet rising demands and lessen the impact on existing supplies. Some tips for conserving energy include recycling products, turning off unused devices, replacing old light bulbs with efficient LED bulbs, and improving insulation and efficiency of home appliances. Widespread conservation efforts can significantly reduce costs and energy imports over time.
Energy Efficiency for school kids
This is a presentation with a purpose of educating school kids (7th grade) about the importance of energy efficiency and also connecting energy usage with the larger picture that is Earth. This is a first of a series of presentations I am doing at Vidyavardhaka school in Mysore. Before the presentation, the students were already aware of the concepts of electricity generation, transmission etc. After the presentation, the kids were able to say that a proportionate amount of coal was burnt every time they wasted electricity. To summarize, I quote one student who said at the end of the presentation, "Sir, why can't they replace the bulbs (incandescant) in Mysore palace with CFLs? That would save a lot of coal from being burnt and prevent a lot of pollution".
Wastage of Eectricity and How to Reduce It-LPU
Electricity consumption at LPU is approximately 4 megawatts per month, costing around 2 crore rupees. Most electricity is consumed in the hostels by appliances like geysers, air conditioners, and coolers. Some key measures to reduce consumption include switching off lights and fans when not in use, replacing CFL and fluorescent bulbs with more efficient LEDs, using solar water heaters instead of electric geysers, and generating more electricity through expanded solar panel installations on campus.
Saving energy
People have been using energy from sources like watermills for thousands of years to power devices and mechanisms. Now, energy powers almost everything in modern homes and daily life. Specifically, heating accounts for 60% of home energy use, with water heating and washing appliances making up another 25% and lighting/electricity the remaining 15%. There are several ways to conserve energy at home, such as using more efficient light bulbs, turning off appliances when not in use, saving water to also conserve energy, regulating thermostats when away, and improving home insulation. Globally, hydroelectric power provides about one fifth of all energy, while wind turbines continue increasing in size, and around 17% of worldwide electricity is used for lighting.
" Overview on Solar energy "
Solar energy is radiant light and heat from the Sun harnessed using a range of ever-evolving technologies such as solar heating, photovoltaics, solar thermal energy, solar architecture and artificial photosynthesis.
Transformation
Student will be able to name common energy transformations, state the law of conservation of energy, and identify how fossil fuels are used for energy. The document discusses energy transformations between kinetic and potential energy, conservation of energy, Einstein's equation relating energy and mass, the formation of fossil fuels from nuclear energy to stored chemical energy, and challenges the student to make a poster showing the multiple transformations from sunlight to coal to electricity to heat used by a hairdryer.
It save electricity
The document discusses ways for individuals to save electricity. It notes that energy resources are being depleted and wasted, harming the environment. The document provides tips for conserving electricity at home, such as turning off lights and devices when not in use, closing doors and windows when heating/cooling, using efficient bulbs, and adjusting thermostats. The conclusion encourages everyone to contribute to sustainability efforts to leave a better world for future generations.
Energy conservation
This document discusses energy conservation. It notes that energy can be converted from one form to another but cannot be created or destroyed. It then gives reasons to conserve energy such as limited fossil fuels on Earth and increasing energy demands. Methods of conserving energy are also presented, such as switching off lights and electronics when not in use to reduce unnecessary energy usage. Renewable and non-renewable energy sources are also briefly discussed.
Save energy for a better future
Saving energy is important to preserve non-renewable resources and the environment. There are many small changes people can make in their daily lives to reduce energy consumption, such as using public transportation, walking or cycling instead of driving, lowering home temperatures, turning off unused lights and appliances, and replacing incandescent bulbs with more efficient options. Making these small behavior changes and adopting more efficient technologies and home improvements can significantly reduce individual energy usage and costs while benefiting the environment.
Energy saving
The document discusses different types of energy sources, including renewable and non-renewable sources. It provides examples of non-renewable sources like fossil fuels and discusses renewable sources such as solar, wind, hydro, geothermal, biomass and tidal energy. The document emphasizes the importance of conserving energy given that non-renewable fuel sources are limited and calls on individuals, especially children, to do their part to reduce energy consumption both at home and at school.
Energy conservation
The document discusses various topics related to energy conservation. It describes different types of energy sources including renewable sources like solar, wind, geothermal, and hydro energy as well as non-renewable sources like fossil fuels. It emphasizes the need for energy conservation given limited fossil fuel reserves and increasing energy demand. Specific recommendations are provided about conserving energy at home, in offices, and in schools through actions like switching off lights and electronics when not in use.
Energy Conservation
1) The document discusses the importance of conserving energy for a sustainable future. It explains that non-renewable energy sources like fossil fuels are finite and will be depleted if consumption is not reduced.
2) It provides examples of how to conserve energy at home and while commuting by turning off lights when not in use, using more efficient appliances, and combining trips to reduce car use.
3) Conserving energy now will help address issues of energy security, reduce environmental impacts, and help adapt to rising energy prices in the future as fossil fuel supplies diminish.
To Identify various sources/wastage of energy in LPU hostels (CHE110 Project)
This document summarizes a report on identifying sources of energy wastage in LPU hostels and providing recommendations. It finds that the main sources of energy used are electrical power from the grid and a solar power plant. Electrical energy is consumed for devices, lighting, and cooling. Significant wastage occurs from leaving appliances on standby and using inefficient bulbs. Tips to conserve energy include using CFLs, recycling, and engaging the community through programs. New measures proposed are installing more solar panels, generating energy from waste, and publishing conservation information.
Normal and eco friendly houses
Eco-friendly houses differ from normal houses in several key ways. Normal houses rely on electricity and LPG gas, whereas eco-friendly houses utilize solar, wind, and biogas energy sources. Eco-friendly houses also have larger windows to allow more natural light, use more sustainable building materials like wood and stone, incorporate composting of household waste, and plant gardens for growing food using rainwater. They aim to reduce energy and resource consumption compared to traditional homes.
Electricity conservation.
1) To conserve electricity at home and work, it is important to use electricity efficiently and avoid waste, such as switching off lights when not in use and replacing incandescent bulbs with fluorescent or LED bulbs.
2) When cooking, some tips include using flat-bottomed pans that make full contact with the heating element, keeping lids on pans to minimize heat loss, and cutting food into smaller pieces for faster, more even cooking.
3) For refrigerators and freezers, maintenance like cleaning coils regularly and keeping doors sealed can improve efficiency, as can avoiding placing them in direct sunlight or too close to walls or other heat sources.
Eco friendly house ELP
Kamilia Broderick describes plans for an eco-friendly house using local and sustainable materials like wood, wool insulation, and solar panels to reduce embodied energy and be less damaging to the environment. The house features triple glazed windows, extra loft insulation, low-flow fixtures, motion sensor lights, and other energy efficient designs to minimize costs and resource usage. Diagrams showcase the wooden walls and floors as well as sustainable features like solar water heating.
Electric Energy Conservation:Tips & Tricks
Vartika Tripathi's work experience document discusses electricity conservation tips. It begins by defining energy and its various types. It then focuses on electrical energy, explaining that it is the energy carried by moving electrons and is generated through various means at power plants. The document provides 20 tips for conserving electrical energy, such as turning off unused lights and electronics, using more efficient bulbs, adjusting thermostats, and utilizing solar power. It also presents lifestyle changes like wearing extra layers, air drying clothes, and closing curtains to retain heat. In conclusion, Vartika thanks the reader for learning about electricity conservation.
Energy conservation 2015
This document discusses energy conservation in India. It summarizes that in 2015, thermal power generation made up 64.7% of India's total installed capacity of 161,351 MW. The document outlines various sources of energy in India, both renewable and non-renewable. It provides statistics on household power consumption and discusses practical methods for energy conservation like installing LED lights, fixing air leaks, and using energy efficient appliances.
Ways to conserve energy
This document discusses how to conserve energy through reducing consumption. It explains that energy can be converted between forms but not created or destroyed. Renewable energy sources like solar and wind can be replenished, unlike non-renewable fossil fuels which are limited. Conserving energy helps preserve resources for future use and saves money. Simple steps like turning off lights and electronics when not in use can help reduce energy waste at home, school, and in public places. Collective conservation efforts can help ensure a sustainable supply of energy for future generations.
Elp (eco friendly house)
The document summarizes an eco-friendly house design that uses various sustainable materials and energy sources. The house features a marble roof to cool the interior, solar panels to generate power from the sun, bamboo walls to provide greenery and oxygen, a solar-powered car, tinted glass ceilings to regulate sunlight and heat, and a water tank decorated to collect rainwater for use.
P1a: Generating and Producing Electricity SJT
This document discusses different methods of generating and transmitting electricity. It compares renewable and non-renewable energy sources. Non-renewable sources like coal, oil and gas are cheap but will run out over time and produce pollution. Renewable sources like solar, wind and hydroelectric do not produce pollution but have higher upfront costs and can be unreliable. Electricity is transmitted through the National Grid at high voltages to reduce power loss over long distances before being stepped down for homes. The cost of electricity depends on power usage and cost per kilowatt hour.
Somatprod
1. Os exercícios contêm problemas sobre propriedades de somatório e produtório, incluindo cálculos de variâncias, matrizes e sistemas de equações.
2. São apresentados 10 exercícios contendo 20 subproblemas sobre aplicação de propriedades algébricas em somatórios e produtórios.
3. Os exercícios envolvem cálculos algébricos com variáveis múltiplas, constantes e sistemas de equações para avaliar o domínio de propriedades em somatórios e prod
More Related Content
What's hot
Energy Efficiency for school kids
This is a presentation with a purpose of educating school kids (7th grade) about the importance of energy efficiency and also connecting energy usage with the larger picture that is Earth. This is a first of a series of presentations I am doing at Vidyavardhaka school in Mysore. Before the presentation, the students were already aware of the concepts of electricity generation, transmission etc. After the presentation, the kids were able to say that a proportionate amount of coal was burnt every time they wasted electricity. To summarize, I quote one student who said at the end of the presentation, "Sir, why can't they replace the bulbs (incandescant) in Mysore palace with CFLs? That would save a lot of coal from being burnt and prevent a lot of pollution".
Wastage of Eectricity and How to Reduce It-LPU
Electricity consumption at LPU is approximately 4 megawatts per month, costing around 2 crore rupees. Most electricity is consumed in the hostels by appliances like geysers, air conditioners, and coolers. Some key measures to reduce consumption include switching off lights and fans when not in use, replacing CFL and fluorescent bulbs with more efficient LEDs, using solar water heaters instead of electric geysers, and generating more electricity through expanded solar panel installations on campus.
Saving energy
People have been using energy from sources like watermills for thousands of years to power devices and mechanisms. Now, energy powers almost everything in modern homes and daily life. Specifically, heating accounts for 60% of home energy use, with water heating and washing appliances making up another 25% and lighting/electricity the remaining 15%. There are several ways to conserve energy at home, such as using more efficient light bulbs, turning off appliances when not in use, saving water to also conserve energy, regulating thermostats when away, and improving home insulation. Globally, hydroelectric power provides about one fifth of all energy, while wind turbines continue increasing in size, and around 17% of worldwide electricity is used for lighting.
" Overview on Solar energy "
Solar energy is radiant light and heat from the Sun harnessed using a range of ever-evolving technologies such as solar heating, photovoltaics, solar thermal energy, solar architecture and artificial photosynthesis.
Transformation
Student will be able to name common energy transformations, state the law of conservation of energy, and identify how fossil fuels are used for energy. The document discusses energy transformations between kinetic and potential energy, conservation of energy, Einstein's equation relating energy and mass, the formation of fossil fuels from nuclear energy to stored chemical energy, and challenges the student to make a poster showing the multiple transformations from sunlight to coal to electricity to heat used by a hairdryer.
It save electricity
The document discusses ways for individuals to save electricity. It notes that energy resources are being depleted and wasted, harming the environment. The document provides tips for conserving electricity at home, such as turning off lights and devices when not in use, closing doors and windows when heating/cooling, using efficient bulbs, and adjusting thermostats. The conclusion encourages everyone to contribute to sustainability efforts to leave a better world for future generations.
Energy conservation
This document discusses energy conservation. It notes that energy can be converted from one form to another but cannot be created or destroyed. It then gives reasons to conserve energy such as limited fossil fuels on Earth and increasing energy demands. Methods of conserving energy are also presented, such as switching off lights and electronics when not in use to reduce unnecessary energy usage. Renewable and non-renewable energy sources are also briefly discussed.
Save energy for a better future
Saving energy is important to preserve non-renewable resources and the environment. There are many small changes people can make in their daily lives to reduce energy consumption, such as using public transportation, walking or cycling instead of driving, lowering home temperatures, turning off unused lights and appliances, and replacing incandescent bulbs with more efficient options. Making these small behavior changes and adopting more efficient technologies and home improvements can significantly reduce individual energy usage and costs while benefiting the environment.
Energy saving
The document discusses different types of energy sources, including renewable and non-renewable sources. It provides examples of non-renewable sources like fossil fuels and discusses renewable sources such as solar, wind, hydro, geothermal, biomass and tidal energy. The document emphasizes the importance of conserving energy given that non-renewable fuel sources are limited and calls on individuals, especially children, to do their part to reduce energy consumption both at home and at school.
Energy conservation
The document discusses various topics related to energy conservation. It describes different types of energy sources including renewable sources like solar, wind, geothermal, and hydro energy as well as non-renewable sources like fossil fuels. It emphasizes the need for energy conservation given limited fossil fuel reserves and increasing energy demand. Specific recommendations are provided about conserving energy at home, in offices, and in schools through actions like switching off lights and electronics when not in use.
Energy Conservation
1) The document discusses the importance of conserving energy for a sustainable future. It explains that non-renewable energy sources like fossil fuels are finite and will be depleted if consumption is not reduced.
2) It provides examples of how to conserve energy at home and while commuting by turning off lights when not in use, using more efficient appliances, and combining trips to reduce car use.
3) Conserving energy now will help address issues of energy security, reduce environmental impacts, and help adapt to rising energy prices in the future as fossil fuel supplies diminish.
To Identify various sources/wastage of energy in LPU hostels (CHE110 Project)
This document summarizes a report on identifying sources of energy wastage in LPU hostels and providing recommendations. It finds that the main sources of energy used are electrical power from the grid and a solar power plant. Electrical energy is consumed for devices, lighting, and cooling. Significant wastage occurs from leaving appliances on standby and using inefficient bulbs. Tips to conserve energy include using CFLs, recycling, and engaging the community through programs. New measures proposed are installing more solar panels, generating energy from waste, and publishing conservation information.
Normal and eco friendly houses
Eco-friendly houses differ from normal houses in several key ways. Normal houses rely on electricity and LPG gas, whereas eco-friendly houses utilize solar, wind, and biogas energy sources. Eco-friendly houses also have larger windows to allow more natural light, use more sustainable building materials like wood and stone, incorporate composting of household waste, and plant gardens for growing food using rainwater. They aim to reduce energy and resource consumption compared to traditional homes.
Electricity conservation.
1) To conserve electricity at home and work, it is important to use electricity efficiently and avoid waste, such as switching off lights when not in use and replacing incandescent bulbs with fluorescent or LED bulbs.
2) When cooking, some tips include using flat-bottomed pans that make full contact with the heating element, keeping lids on pans to minimize heat loss, and cutting food into smaller pieces for faster, more even cooking.
3) For refrigerators and freezers, maintenance like cleaning coils regularly and keeping doors sealed can improve efficiency, as can avoiding placing them in direct sunlight or too close to walls or other heat sources.
Eco friendly house ELP
Kamilia Broderick describes plans for an eco-friendly house using local and sustainable materials like wood, wool insulation, and solar panels to reduce embodied energy and be less damaging to the environment. The house features triple glazed windows, extra loft insulation, low-flow fixtures, motion sensor lights, and other energy efficient designs to minimize costs and resource usage. Diagrams showcase the wooden walls and floors as well as sustainable features like solar water heating.
Electric Energy Conservation:Tips & Tricks
Vartika Tripathi's work experience document discusses electricity conservation tips. It begins by defining energy and its various types. It then focuses on electrical energy, explaining that it is the energy carried by moving electrons and is generated through various means at power plants. The document provides 20 tips for conserving electrical energy, such as turning off unused lights and electronics, using more efficient bulbs, adjusting thermostats, and utilizing solar power. It also presents lifestyle changes like wearing extra layers, air drying clothes, and closing curtains to retain heat. In conclusion, Vartika thanks the reader for learning about electricity conservation.
Energy conservation 2015
This document discusses energy conservation in India. It summarizes that in 2015, thermal power generation made up 64.7% of India's total installed capacity of 161,351 MW. The document outlines various sources of energy in India, both renewable and non-renewable. It provides statistics on household power consumption and discusses practical methods for energy conservation like installing LED lights, fixing air leaks, and using energy efficient appliances.
Ways to conserve energy
This document discusses how to conserve energy through reducing consumption. It explains that energy can be converted between forms but not created or destroyed. Renewable energy sources like solar and wind can be replenished, unlike non-renewable fossil fuels which are limited. Conserving energy helps preserve resources for future use and saves money. Simple steps like turning off lights and electronics when not in use can help reduce energy waste at home, school, and in public places. Collective conservation efforts can help ensure a sustainable supply of energy for future generations.
Elp (eco friendly house)
The document summarizes an eco-friendly house design that uses various sustainable materials and energy sources. The house features a marble roof to cool the interior, solar panels to generate power from the sun, bamboo walls to provide greenery and oxygen, a solar-powered car, tinted glass ceilings to regulate sunlight and heat, and a water tank decorated to collect rainwater for use.
P1a: Generating and Producing Electricity SJT
This document discusses different methods of generating and transmitting electricity. It compares renewable and non-renewable energy sources. Non-renewable sources like coal, oil and gas are cheap but will run out over time and produce pollution. Renewable sources like solar, wind and hydroelectric do not produce pollution but have higher upfront costs and can be unreliable. Electricity is transmitted through the National Grid at high voltages to reduce power loss over long distances before being stepped down for homes. The cost of electricity depends on power usage and cost per kilowatt hour.
What's hot (20)
To Identify various sources/wastage of energy in LPU hostels (CHE110 Project)
To Identify various sources/wastage of energy in LPU hostels (CHE110 Project)
Viewers also liked
Somatprod
1. Os exercícios contêm problemas sobre propriedades de somatório e produtório, incluindo cálculos de variâncias, matrizes e sistemas de equações.
2. São apresentados 10 exercícios contendo 20 subproblemas sobre aplicação de propriedades algébricas em somatórios e produtórios.
3. Os exercícios envolvem cálculos algébricos com variáveis múltiplas, constantes e sistemas de equações para avaliar o domínio de propriedades em somatórios e prod
ABQLA Conference "Making it Happen Together"
The document discusses strategies for building voter support for libraries. It advocates using a community organizing model to identify, activate, and mobilize supporters. Rather than focusing on traditional metrics like library cards or usage, it emphasizes developing relationships and social capital in the community. It also promotes nontraditional library services like patron-driven collections, community programs, and partnerships with other organizations to expand the library's impact and demonstrate its value.
Grupos edmodo
El documento describe los grupos en Edmodo, la unidad básica de organización. Los grupos pueden tener profesores, alumnos, profesores invitados y padres como miembros. También es posible crear subgrupos dentro de los grupos principales. El documento explica cómo crear nuevos grupos y modificar la configuración de grupos existentes.
Hvordan får vi forskerne med på leken nuas - kommunikationskonferanse 20.01...
Hvordan får vi forskerne med på leken? Presentasjon fra workshop om forskningskommunikasjon på Kommunikasjonskonferanse arrangert av (NUAS Det nordiska universitetsadministratörssamarbetet). 20. januar 2014 i Aarhus.
Chip Project Proposal By Heba
The Community Health Innovator Program (CHIP) aims to train community health workers into community health innovators through an online and mobile-based platform providing a planned multidisciplinary curriculum and opportunities to be matched with mentors. The goals of CHIP are to provide an accessible, low-cost training program for community health workers via computer or mobile phone to enable knowledge sharing globally. The existing system allows users to register, complete training and assessments in French or English, and access material uploaded by mentors.
5 Programming Languages And Tools Data Scientists Use Now
As we know Data Scientist is world's most sexiest job, and if your willing to start with Data Science but confused about the programming languages and tools that are hot among data scientists right now.
Visit: blog.tyronesystems.com
Prenatal prescription /certified fixed orthodontic courses by Indian dental a...
Prenatal prescription /certified fixed orthodontic courses by Indian dental a...Indian dental academy
The document discusses the importance of prenatal nutrition and its impact on lifelong health. It outlines 10 principles of prenatal programming that describe how a fetus is permanently affected by its prenatal environment. This includes the placenta's role and how different organs develop. Nutrition during each trimester can influence later health outcomes like cardiovascular health, weight, and diabetes. Studies like the Dutch Hunger Winter show that prenatal deprivation can affect future generations. Certain nutrients like iron, calcium, chromium and zinc are especially important during pregnancy.2015/11/30付 オリジナルiTunes週間トップソングトピックス
The Natsu Styleが発表する独自の新しい音楽配信ランキング「オリジナルiTunes週間トップソング」11/30付の注目トピックスです。
「オリジナルiTunes週間トップソング」ではiTunesのランキング推移などから独自の指数を算出し、音楽配信の売れ行きを分かりやすくお伝えします。
The Natsu Style: http://www.tnsori.com
オリジナルiTunes週間トップソング: http://www.tnsori.com/category/itunes-weekly
(iTunes、iTunes Store、Apple Musicは、Apple.incの登録商標です。)
formato 1
Estos documentos proporcionan información sobre diferentes registros escolares y actas de nacimiento de entre los años 1979 y 2004 en México. Incluyen detalles sobre evaluaciones de rendimiento escolar, certificados de educación primaria, y extractos de actas que nombran a maestros, alumnos, jueces, testigos y detalles de nacimiento. Juntos, estos documentos ofrecen una perspectiva sobre cómo se registraban y evaluaban la educación y los nacimientos en el pasado.
India Powerpoint 2003
The presentation made during the INDEST Workshop & SIS 2008 Conference held at IIM Indore during 4-6 Dec 08.
vincent tan陈志远大事记
- Vincent Tan gained a franchise to open McDonald's restaurants in Malaysia in 1981 at age 29.
- In 1985, the Malaysian government privatized Sports Toto, the state lottery, and sold 70% of it to Tan.
- By 1990, Tan had acquired full control of Sports Toto and launched a new holding company called Berjaya Group.
- Tan's businesses grew to include personal care products, consumer goods, restaurants, manufacturing, telecommunications, and more through acquisitions in Malaysia and other countries over the following decades.
Cónicas Tanya y Bianca 2°B MATEMÁTICAS.
Este documento define y describe las principales cónicas: la circunferencia, la parábola, la elipse y la hipérbola. Explica que las cónicas son curvas formadas por la intersección de un cono y un plano, y clasifica sus características geométricas clave como sus focos, radios y distancias. También proporciona fuentes de imágenes y texto sobre cada tipo de cónica.
The daunting mission to achieve customer success
With most of the client revenues shifting to post "closing" a new kind of sales organization is rising. An organization with a new kind of superstar that pursues customer success as its primary goal.
Viewers also liked (20)
Hvordan får vi forskerne med på leken nuas - kommunikationskonferanse 20.01...
Hvordan får vi forskerne med på leken nuas - kommunikationskonferanse 20.01...
5 Programming Languages And Tools Data Scientists Use Now
5 Programming Languages And Tools Data Scientists Use Now
Prenatal prescription /certified fixed orthodontic courses by Indian dental a...
Prenatal prescription /certified fixed orthodontic courses by Indian dental a...
Similar to Blue Team Presentation
Orange Presenation Final Presentation
The document describes various sustainable features and initiatives at multiple schools. It discusses solar panels, insulation improvements, wind turbines, and other renewable energy sources that have reduced schools' carbon emissions and energy costs. Various recycling, transportation, insulation, and other programs aim to make the schools more environmentally friendly.
Pallavi global warming
Global warming is a steady rise in Earth's temperature caused by increasing levels of carbon dioxide and other greenhouse gases in the atmosphere from human activities like burning fossil fuels. Burning fossil fuels for energy, transportation, manufacturing and other uses releases carbon dioxide, increasing atmospheric concentrations. This traps heat and warms the planet. Effects include rising sea levels from melting ice sheets and glaciers, which could displace millions of people globally. Deforestation also contributes by reducing areas that absorb carbon dioxide from the atmosphere. Solutions proposed include using more efficient light bulbs, appliances and vehicles, generating energy from renewable sources like solar power, and planting trees.
Eco_home_ppt
The document discusses various aspects of eco homes including energy usage, construction methods, waste reduction, and carbon footprint. It notes that one third of all energy produced is used by UK households and electricity usage has doubled since the 1970s. It also discusses using renewable energy sources, reducing waste through composting and recycling, and lowering carbon footprint through steps like improving home insulation and using public transportation.
Green Team Final Presentation
The document describes plans for an eco-friendly school called Green High. It details various sustainability features throughout the school including solar panels, sensor taps, recycled materials, and a living roof. Rules are outlined to encourage energy conservation and reduce waste and littering. The layout and designs of the main building, kitchens, drama theatre, sports block, garden, and ICT suite emphasize energy efficiency and use of natural lighting.
Building Integrated Renewables Public
The document discusses various renewable energy sources including solar, wind, biomass, and biofuels. It provides information on technologies such as solar photovoltaics and solar thermal, types of wind turbines, biomass heating systems, and combined heat and power systems. Case studies are presented on installations of solar PV, biomass CHP, and small residential wind turbines.
Energy North
Energy North is an Aboriginal-owned company specializing in biomass heating technology manufactured in Canada. They have over 26 years of experience designing and manufacturing biomass industrial boilers and cogeneration plants. Their certified products meet North American standards and regulations and include commercial pellet boilers, hybrid biomass boilers, and biomass cogeneration systems for communities.
Green buildings ezhil eco smart homes-ver3
The document outlines the goals and practices of Ezhil Green Homes in building sustainable, zero-energy homes in India. Some key points:
1. Ezhil Green Homes aims to build homes that produce as much or more energy than they consume and generate minimal waste and pollution.
2. Sustainable practices employed include optimizing building orientation, ventilation, and materials to reduce energy usage. Solar panels, wind turbines, and water recycling are used to offset power needs.
3. A life-cycle assessment approach considers the embodied energy and environmental impacts of materials from sourcing through construction to demolition. Alternatives to conventional bricks help reduce deforestation and emissions.
Project S.T.R.A.W
Project S.T.R.A.W. is building a passive solar strawbale house in Seneca County, Ohio to be completed by summer 2011. The project aims to educate people about affordable and sustainable building using natural materials like strawbale insulation. Features include passive solar design, solar panels, and the goal of net zero energy usage. Volunteers are helping with construction to both save costs and teach others sustainable building techniques.
Flora Wall Presentation.pdf
FloraWall is an aesthetic moss wall that uses electrons produced by the plants during photosynthesis to create supplemental electricity for domestic and commercial use.
SUSTAINABLE MATERIAL AND CITIES
Bamboo is considered one of the best eco-friendly building materials. It has an incredibly high self-generation rate, with some being reported to have grown up to three feet within 24 hours. It continues spreading and growing without having to be replanted after harvest. Bamboo is a perennial grass and not wood and grows on every continent, except Europe and Antarctica.
It also has a high strength-to-weight ratio, even greater comprehensive strength than concrete and brick, and lasts incredibly long. It is, therefore, the best choice for flooring and cabinetry. Unfortunately, bamboo requires treatment to resist insects and rot. If left untreated, bamboo contains a starch that greatly invites insects, and it could swell and crack after absorbing water.
2. Precast Concrete Slabs
Precast Concrete Slabs
The slabs are formed at a manufacturer’s site and are shipped in whole sections to construction sites. Some are made entirely of concrete but have large hollow air spaces, like concrete blocks. Precast concrete slabs are used for walls and building facades as they hold up well to all sorts of weather, while others can be used for floor and flat roofs.
Concrete is an excellent way of controlling heat within a building and is affordable as a building material. The sustainability of precast concrete slabs is higher than many traditional concrete options as the slabs often take much less energy to produce and assemble. Precasting concrete also allows the material to properly cure in a controlled environment, rather than exposing it to a variety of unfavorable weather conditions while curing at a construction site. As such, precast concrete slabs avoid cracks and structural faults within the concrete and eventual demolitions.
4. Straw Bales
Straw Bales
It is another green building material that can be used as a framing material. They have good insulation properties and can act as soundproof material. It can also be used as fill material in between columns and in beams framework/ as they cannot allow air through, they can have some fire resistance properties.
Straw can be harvested and re-planted easily with minimal environmental impacts. Making straw into bales also has very low influence. They can also be placed in walls, attics and ceilings, to contribute to cooler the house in the summer and warmer temperatures in the winter.
5. Recycled Plastic
small-plants-bottle-recycle
Source: Canva
Rather than sourcing, mining and milling new components for construction, manufacturers are using recycled plastic and other ground-up trash to produce concrete. The practice is reducing greenhouse gas emissions and is giving plastic waste new use, rather than clogging landfills and contributing to plastic pollution.
A blend of recycled and virgin plastic is also used to make polymeric timbers, for use in making fences, picnic tables and other structures, at the same time, saving trees. Plastic from two-liter bottles can be spun into fiber for the production of
Newsletter ii
This document discusses renewable and non-renewable energy sources. It begins by explaining the difference between conventional (non-renewable) energy sources like coal and unconventional (renewable) sources. It notes that while non-renewable sources were formed over millions of years, they will eventually be exhausted. It also discusses the pollution caused by burning fossil fuels. The document then lists some common non-renewable sources and renewable sources of energy. It provides examples of how the share of renewable energy is growing in some European countries and discusses geothermal energy systems in more detail.
Integrated recovery & low-carbon reconstruction - and update from Pakistan
An update of our / DFID's shelter and WASH projects in Northern Sindh. This time with a calculation of carbon dioxide emissions reductions (!)
And all about building with lime..
A SYSTEM OF ENERGY, WATER AND COMPOST PRODUCTION FROM WASTE
BACKGROUND
Recognizing the importance of waste management in reducing emissions of
greenhouse gases, HUMANBE initiates and implements a system of energy
water and compost production, to help the establishmentof a local management
of waste treatment.
ADVANTAGE
1. Recovery of waste by generating electricity and water
2. Creation of cheap electricity
2. Reduction of the volume of household waste treated by the community, by a source separation
2. Avoid the use of incineration, landfilling and transportation
3. Production of natural compost
4. Awareness of sustainable development by demonstrating the life cycle of organic matter and usefulness of the transformation of waste
Paul Barker, Bristol City Council
Bristol City Council has a target to reduce carbon emissions by 40% by 2020. This equates to reducing emissions by 2,000 tonnes per year. The document discusses various options for meeting this target, including solar PV installations, biomass boilers, and expanding the use of wood fuel. Case studies are presented for small and medium solar PV installations and a biomass boiler. These case studies analyze the costs, savings, payback periods, and cost per tonne of carbon reduced for each technology. The document concludes with Bristol City Council's plan to invest 1 million pounds in a solar PV program for schools, using prudential borrowing to fund the installations.
OSB Recipes Cooking book
The document provides several recipes for more sustainable living in the areas of energy, transport, waste, food, and social practices. It describes examples from ecovillages in Scandinavia that implement cogeneration of heat and power using Stirling engines, passive building design using natural ventilation and insulation, bike sharing programs, composting toilets, rainwater collection, green roofs, herb gardens, and shared community meals. The recipes emphasize using natural materials and renewable resources to meet needs in an ecological and low-cost manner.
Biomass and hydrogen
This document discusses biomass and hydrogen as sources of renewable energy. It defines biomass as fuel derived from living or recently living organisms, such as wood, crop residues, and garbage. Biomass energy is stored solar energy captured through photosynthesis. The document outlines various types of biomass including energy crops, crop residues, sustainably harvested wood, and municipal wastes. It also discusses various methods of producing energy from biomass like biogas from manure and landfill gas. The document then discusses hydrogen as an energy carrier that can be produced through electrolysis of water and used in fuel cells. It argues hydrogen fuel could revolutionize transportation and power generation with environmental benefits.
Sources of energy
This document discusses different types of energy sources. It describes non-renewable energy sources such as coal, petroleum, natural gas and nuclear fuels which cannot be replenished quickly. Renewable energy sources like wood, geothermal, tidal and wind energy are also outlined. The document then provides details on various energy sources, technologies and plants including thermal power plants, hydro power plants, biomass, biogas, wind energy and solar energy. Advantages and limitations of different renewable technologies are highlighted.
Updated power point lpg
Project S.T.R.A.W. aims to build a passive solar strawbale house in Seneca County, Ohio to educate others about sustainable building. The project seeks to be net zero energy and uses recycled and natural materials like strawbale insulation, solar panels, and a rain garden. Volunteers are helping with construction to create an energy efficient home that demonstrates alternative building techniques.
GW.ppt
This document discusses global warming and carbon emissions. It begins by asking if the earth is warming and if human activities are contributing to increased temperatures. It then examines trends in worldwide carbon emissions since 1750, showing steady growth from industrialization. Charts plot rising atmospheric CO2 levels and future projections of doubled CO2 within 150 years if emissions continue increasing. Taking individual actions like replacing incandescent light bulbs with CFLs and driving less can significantly reduce household carbon footprints and energy costs. Making small changes across many households and individuals can collectively help address global warming.
Similar to Blue Team Presentation (20)
Integrated recovery & low-carbon reconstruction - and update from Pakistan
Integrated recovery & low-carbon reconstruction - and update from Pakistan
A SYSTEM OF ENERGY, WATER AND COMPOST PRODUCTION FROM WASTE
A SYSTEM OF ENERGY, WATER AND COMPOST PRODUCTION FROM WASTE
Recently uploaded
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Recently uploaded (20)
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Blue Team Presentation
- 1. BSF Building Schools for the Future...
- 2. What question are we trying to answer? How will BSF make a difference to the environment?
- 3. Why Should Schools in Lewisham Reduce their Carbon Footprints? The world is in serious danger of global warming. As you may already know polar ice-caps are melting and the polar region has become a serious concern. The UK is one of the biggest producers of CO 2 in the world That’s why we think Lewisham should lead the way for the new “carbon neutral” schools
- 9. DESIGN
- 12. IDEA 1 IDEA 2 THE TWO INITIAL DESIGNS
- 13. But for our final design we decided to merge both ideas and this is what came out.
- 16. The Gym…
- 22. For a wind turbine of a 26ft blade radius we calculated how much energy it would produce at 5mph School would need 20500 kwh per month power output from the turbine is 500 kwh per month 500 ÷ 20500 x 100 = 2.4% = Amount saved SCHOOL PAYS PER YEAR ( NATIONAL GRID ) = £20000 SAVED ( THROUGH TURBINE ) = £500 PER YEAR COST OF TURBINE = £20000 YEARS TO RECOUP MONEY = 40 YEARS 40 years is a long time to recoup money but we feel that the environment is more important
- 23. “The Living Roof” Meet the Building!!