This document is a catalogue for petroleum equipment that includes: 1) Several models of drilling rigs and workover rigs with technical specifications like nominal drilling depth and mast height. 2) Components for drilling rigs like mud pumps, drawworks, and swivels. 3) Oilfield equipment and tools like production equipment, drill strings, and wellhead tools. 4) Engineering and technical services. It also lists quality certificates and specifications for truck-mounted rig models ranging from 1000 to 4000 meters nominal drilling depth.

1. DISTRIBUTED BY
LO MEJOR DE AMBOS MUNDOS
PETROLEUM EQUIPMENT CATALOGUE
( The best of both worlds )

2. Catalogue
• Ⅰ Drilling Rig&Workover rig
• ZJ40/2250 Drilling Rig
• ZJ50/3150 Drilling Rig
• ZJ70/4500 Drilling Rig
• ZJ20/1470 CZ Drilling & Workover Rig
• ZJ30/1700 CZ Drilling & Workover Rig
• ZJ40/2250 CZ Drilling & Workover Rig
• Ⅱ Drilling Rig Components
• Mud Pump
• Drawworks
• Rotary Table
• Crown Block
• Travelling Block
• Swivel
• Solid Control Equipment
• Ⅲ Oilfield Equipment & Tools
• Oil production equipment
• Drill string, Casing, Tubings and Pipelines
• Wellhead Tools
• Fishing Tools
• Ⅳ Engineering and Technical Service

3. Quality Certificates
• CQM Certificate
• Quality product certificate
• CQM Certificate
• API - 4F Certificate
• Quality management system certification
• Environmental management system certification
• Occupational health and safety management system certification
• Enterprise credit grade AAA

4. SKID-MOUNTED RIG

5. Nominal drilling depth:
4-1/2″DP ft / m
5″ DP ft / m
13200 / 4000
10500 / 3200
13200 / 4000
10500 / 3200
13200 / 4000
10500 / 3200
13200 / 4000
10500 / 3200
13200 / 4000
10500 / 3200
Drawworks max.
input power: hp/ KW
1000 / 735 1000 / 735 1000 / 735 1000 / 735 1000 / 735
Travelling sheave
diameter: in./mm
44 / 1120 44 / 1120 44 / 1120 44 / 1120 44 / 1120
Mast type “K” “K” “K” “K” “K”
Clear height of
mast: ft /m 142 / 43 142 / 43 142 / 43 142 / 43 142 / 43
Mud pump sets 2 2 2 2 2
Power of main diesel:
hp / KW 1100 / 810 1100 / 810 1632 / 1200 1632 / 1200 1360 / 1000
Total volume of
mud tank: BBL/ m3
1635 / 260 1635 / 260 1635 / 260 1635 / 260 1635 / 260
Main Parameters of 1000hp(4000m)Drilling Rig
Model:U.S Met ZJ40/2250L ZJ40/2250LD ZJ40/2250LDB ZJ40/2250DZ ZJ40/2250DBF

6. SKID-MOUNTED RIG

7. Nominal drilling depth:
4-1/2″DP ft / m
5″ DP ft / m
Drawworks max.
input power: hp/ KW
Travelling sheave
diameter: in./mm
Mast type “K” “K” “K” “K” “K”
Clear height of
mast: ft /m
Mud pump sets
Power of main diesel:
hp / KW
Total volume of
mud tank: BBL/ m3
16400 / 5000
14800 / 4500
16400 / 5000
14800 / 4500
16400 / 5000
14800 / 4500
16400 / 5000
14800 / 4500
16400 / 5000
14800 / 4500
1500 / 1100 1500 / 1100 1500 / 1100 1500 / 1100 1500 / 1100
50 / 1270 50 / 1270 50 / 1270 50 / 1270 50 / 1270
148 / 45 148 / 45 148 / 45 148 / 45 148 / 45
2 2 2 2 2
1500 / 1100 1500 / 1100 1500 / 1100 1500 / 1100 1500 / 1100
2010 / 320 2010 / 320 2010 / 320 2010 / 320 2010 / 320
Main Parameters of 1500hp(5000m)Drilling Rig
Model:U.S Met ZJ50/3150L ZJ50/3150LD ZJ50/3150LDB ZJ50/3150DZ ZJ50/3150DBF

8. SKID-MOUNTED RIG

9. Nominal drilling depth:
4-1/2″DP ft / m
5″ DP ft / m
Drawworks max.
input power: hp/ KW
Travelling sheave
diameter: in./mm
Mast type “K” “K” “K” “K” “K”
Clear height of
mast: ft /m
Mud pump sets
Power of main diesel:
hp / KW
Total volume of
mud tank: BBL / m3
23000 / 7000
19700 / 6000
23000 / 7000
19700 / 6000
23000 / 7000
19700 / 6000
23000 / 7000
19700 / 6000
23000 / 7000
19700 / 6000
2000 / 1470 2000 / 1470 2000 / 1470 2000 / 1470 2000 / 1470
152 / 46.5 152 / 46.5 152 / 46.5 152 / 46.5 152 / 46.5
60 / 1524 60 / 1524 60 / 1524 60 / 1524 60 / 1524
2 2 3 3 3
1500 / 1100 1500 / 1100 1630 / 1200 1630 / 1200 1630 / 1200
2400 / 380 2400 / 380 2400 / 380 2400 / 380 2400 / 380
Main Parameters of 2000hp (7000m)Drilling Rig
Model:U.S Met ZJ70/4500L ZJ70/4500LD ZJ70/4500LDB ZJ70/4500DZ ZJ70/4500DBF

10. TRUCK-MOUNTED RIG

11. Drilling depth(4-1/2″ drilling rod) m(ft)
Workover depth(3-1/2″ drilling rod) m(ft)
The max. hook load KN(lb)
The drilling line dia. mm(in)/active rope numbers
The max. hook lifting speed m/s(ft/s)
Outside dimension in moving mode m(ft)
Weight kg(lb)
Power model
Engine power Kw(hp)(2100r/min)
Hydro transmission type
Emergency power source (electric motor)
The chassis driving type
The min. turning dia. m(ft)
The min. clearance from ground mm(in)
1000 (3280)
3500 (11483)
1125 (253000)
Ф26 (1 ″)/8
1.23 (4)
17.5×3.1×4.18(57.4×10.17×13.7)
42000 (92590)
Drawworks type
Drawworks power hp
The main drum rope groove body dia.× length mm (in)
The main drum brake type
The main drum auxiliary brake
Drawworks lifting shifts
The mast model No.
The mast height m(ft)
The rack platform height m(ft)
Performing condition-wind speed km/j(kn)
Control/lights/power circuit
Hydro/baro system rated pressure MPa (psi)
Drilling platform
Rotary table
Travelling hook
Swivel
CAT3406C
343 (460)
ALLISON-S5600DB
Allocation selectable
10×8 (8×8)
34 (111.55)
340 (13.39)
Double drum (single drum)
450
Ф429×965(Ф16.9×38)
Belt (hydro disk selectable)
22″SR water brake (air-control water-cooling disk selectable)
5 forward 1 reverse
JJ119/33.1-W
31.3 (102.69)
19.7 / 20.7 (55.77 / 64.6)
110 (60)
24V/220V/380V(China)
14/0.833-0.93 (2002/119.12-133)
ZT1470/3.7-S extending type drilling platform
ZP175(ZP105)
YG150
SL120
CZ10(XJ450)Truck-Mounted Rig

12. TRUCK-MOUNTED RIG

13. Drilling depth(4-1/2″ drilling rod) m(ft)
Workover depth(3-1/2″ drilling rod) m(ft)
The max. hook load KN(lb)
The drilling line dia. mm(in)/active rope numbers
The max. hook lifting speed m/s(ft/s)
Outside dimension in moving mode m(ft)
Weight kg(lb)
Power model
Engine power Kw(hp)(2100r/min)
Hydro transmission type
Emergency power source (electric motor)
The chassis driving type
The min. turning dia. m(ft)
The min. clearance from ground mm(in)
Drawworks type
Drawworks power hp
The main drum rope groove body dia.× length mm (in)
The main drum brake type
The main drum auxiliary brake
Drawworks lifting shifts
The mast model No.
The mast height m(ft)
The rack platform height m(ft)
Performing condition-wind speed km/j(kn)
Control/lights/power circuit
Hydro/baro system rated pressure MPa (psi)
Drilling platform
Rotary table
Travelling hook
Swivel
10×8
34 (111.55)
340 (13.39)
Double drum (single drum)
550
Ф16.9×38 (Ф429×965)
Belt (hydro disk selectable)
22″SR water brake (air-control water-cooling disk selectable)
5 forward 1 reverse
24V/220V/380V(China)
14/0.833-0.93(2002/119.119-132.99)
CZ15(XJ550)Truck-Mounted Rig
1500 (4920)
4000 (13123)
1350 (303500)
Ф26 (1″) / 8
1.33 (4.36)
19.6×2.9×4.3 (64.3×9.5×13.8)
51000 (112430)
CATC15
540HP
ALLISON-S5600HR
Allocation selectable
JJ135/34-W
34 (111.55)
20 / 21.5 (65.62/70.54)
110 (60)
ZT1470/4.5-S extending type drilling platform
ZP175
YG150
SL135 (SL160)

14. TRUCK-MOUNTED RIG

15. Drilling depth(4-1/2″ drilling rod) m(ft)
Workover depth(3-1/2″ drilling rod) m(ft)
The max. hook load KN(lb)
The drilling line dia. mm(in)/active rope numbers
The max. hook lifting speed m/s(ft/s)
Outside dimension in moving mode m(ft)
Weight kg(lb)
Power model
Engine power Kw(hp)(2100r/min)
Hydro transmission type
Emergency power source (electric motor)
The chassis driving type
The min. turning dia. m(ft)
The min. clearance from ground mm(in)
Drawworks type
Drawworks power hp
The main drum rope groove body dia.× length mm (in)
The main drum brake type
The main drum auxiliary brake
Drawworks lifting shifts
The mast model No.
The mast height m(ft)
The rack platform height m(ft)
Performing condition-wind speed km/j(kn)
Control/lights/power circuit
Hydro/baro system rated pressure MPa (psi)
Drilling platform
Rotary table
Travelling hook
Swivel
CZ20(XJ650)Truck-Mounted Rig
2000 (6560)
5500 (18045)
1470 (330700)
Ф29 (1-1/8″)/8
1.31 (4.3)
20.13×3.2×4.4(66×10.5×14.44)
56000 (123456)
CAT3412
385(650)
ALLISON-S6610HR
Allocation selectable
12×8
36 (118.11)
340 (13.39)
Double drum (single drum)
650
Ф18.9×36 (Ф480×914.5) Belt type (hydro disk type)
202″SR water brake (air-control water-cooling)
5 forward 1 reverse
JJ155/35-W
35 (114.83)
20 / 21.5 (65.6/70.54)
110 (59.35)
24V/220V/380V(China)
14/0.833-0.93(2002/119.12-133)
ZT1470/4.5-Z extending drilling platform
ZP175
YG150
SL160

16. TRUCK-MOUNTED RIG

17. Drilling depth(4-1/2″ drilling rod) m(ft)
Workover depth(3-1/2″ drilling rod) m(ft)
The max. hook load KN(lb)
The drilling line dia. mm(in)/active rope numbers
The max. hook lifting speed m/s(ft/s)
Outside dimension in moving mode m(ft)
Weight kg(lb)
Power model
Engine power Kw(hp)(2100r/min)
Hydro transmission type
Emergency power source (electric motor)
The chassis driving type
The min. turning dia. m(ft)
The min. clearance from ground mm(in)
Drawworks type
Drawworks power hp
The main drum rope groove body dia.× length mm (in)
The main drum brake type
The main drum auxiliary brake
Drawworks lifting shifts
The mast model No.
The mast height m(ft)
The rack platform height m(ft)
Performing condition-wind speed km/j(kn)
Control/lights/power circuit
Hydro/baro system rated pressure MPa (psi)
Drilling platform
Rotary table
Travelling hook
Swivel
CZ30(XJ750)Truck-Mounted Rig
3000 (9840)
6500 (21325)
1700 (381260)
Ф29 (1-1/8″)/8
1.36 (4.46)
21.25×3.3×4.47(69.7×10.8×14.67)
76000 (167548)
CAT3406C
343×2(460×2)
ALLISON-S5600×2
__ __
Double drum(single drum)
750
Ф480×914.5(Ф18.9×36)
Belt(hydro disk selectable)
WCB324 disk brake
5 forward 1 reverse
14×8
42(137.8)
340(13.39)
JJ180/36-W/JJ180/38-W
36(118.11) / 38(124.6)
20.4 (66.9)
110 (60)
24V/220V/380V(China)
14/0.833-0.93 (2002/119.12-133)
ZT2250/5-Z foldable drilling platform
ZP205
YG170
SL225

18. TRUCK-MOUNTED RIG

19. Drilling depth(4-1/2″ drilling rod) m(ft)
Workover depth(3-1/2″ drilling rod) m(ft)
The max. hook load KN(lb)
The drilling line dia. mm(in)/active rope numbers
The max. hook lifting speed m/s(ft/s)
Outside dimension in moving mode m(ft)
Weight kg(lb)
Power model
Engine power Kw(hp)(2100r/min)
Hydro transmission type
Emergency power source (electric motor)
The chassis driving type
The min. turning dia. m(ft)
The min. clearance from ground mm(in)
Drawworks type
Drawworks power hp
The main drum rope groove body dia.× length mm (in)
The main drum brake type
The main drum auxiliary brake
Drawworks lifting shifts
The mast model No.
The mast height m(ft)
The rack platform height m(ft)
Performing condition-wind speed km/j(kn)
Control/lights/power circuit
Hydro/baro system rated pressure MPa (psi)
Drilling platform
Rotary table
Travelling hook
Swivel
CZ40(XJ1000)Truck-Mounted Rig
4000(13120)
7500(24606)
2250(505800)
Ф32(1-1/4″) /10
1.36(4.46)
22.45×3.3×4.48(73.65×10.8×14.7)
82000(180776)
CAT C-16
448×2 (600×2)
ALLISON-S6610×2
__ __
14×10
44 (144)
340 (13.39)
JJ225/39-W
39 (127.92)
20.4 (66.9)
110 (60)
24V/220V/380V(China)
14/0.833-0.93 (2002/119.12-133)
Double drum (single drum)
1000
Ф635×1254(Ф25×49.4)
Hydro disk type
WCB324 disk brake (new type)
5 forward 1 reverse
ZT3000/6.7-Z foldable drilling platform
ZP275
YG225
SL225

20. Drilling Rig Components
◆ Conform to API 4F/8A standard.
◆ Available models:TC30、 TC50、 TC90、 TC135、 TC170、 TC225、TC315、 TC450、
TC585,TC650.
◆ The max.load:300-6500KN .
Crown block

21. Drilling Rig Components
Travelling block
◆ Conform to API 8A standard.
◆ Available models:DG50、 DG100、 DG225、 DG315、 DG450、DG585、 DG650.
◆ The max.hook load:500-6500KN.

22. Drilling Rig Components
Swivel
◆ Conform to API 8A standard.
◆ Available model:SL135、 SL170、 DG225、 SL225、 SL450、SL585、SL650.
◆ The max.hook load:1350-6500 KN.

23. Drilling Rig Components
Rotary table
◆ Conform to API 7K standard.
◆ Available model:ZP175、 ZP205、 ZP275、 ZP375、ZP475.
◆ The rated load: 2700-6750 KN .

24. Drilling Rig Components
Drawworks
◆ Conform to to API 7K standard.
◆ Our company can produce various models & standards of drawworks.
◆ The drawworks rated input power is from 285HP-3000HP.
◆ There are two kinds of built-in speed shifts and out-speed shifts.
◆ The drawworks has various structures of single axis, 3 axises and 4 axises.

25. Drilling Rig Components
Mud pump
◆ Conform to to API 7K standard
◆ Our company can provide the F model series of 500HP, 600HP, 800HP,
1000HP, 1300HP,1600HP and 3NB series of drilling mud pumps.
◆ The mud pumps are divided into horizontal, three-cylinder and single
function plunger structure.

26. Mud purifying system
◆ The whole system is divided into 5 grade purification, equipped with vibrosive, desander,
Degasser ,centrifuge, mixer, weight-up system, supplying system, etc. It has the feature of
advanced technology, reliable production, convenient transportation etc. fit for various oilfields
applications of coldness, desert ,swamp etc. various oilfields applications.
◆ The system of equipped mud purifying system from 1000m to 9000m depth can be designed
and manufactured ,also can be according to the customer’s requests.
Shale shaker Mud Cleaner

27. Desander Agitator Liquid-gas Separator
Mud purifying system

28. Desilter Vacuum Degasser
Mud purifying system

29. Oilfield Equipment & Tools
Sucker rod pump
Conform to API standard.
Pump dia:1 1/4 ，1 1/2， 1 3/4， 2 1/4， 2 3/4 ，3 1/4，3 3/4 different models.

30. Oilfield Equipment & Tools
Sucker rod
Conform to API standard.
Pump dia: 1 1/4 ， 1 1/2， 2 1/4， 2 3/4 different models.

31. Oilfield Equipment & Tools
Drill pipe
Conform to API standard.
Steel grade EGXS.
Size:2 3/8 ，3 1/2， 2 7/8， 4 1/2，5， 5 1/2.

32. Oilfield Equipment & Tools
Drill collar
Conform to API standard.
Out dia： 2 3/8”，3 1/2” ， 2 7/8”， 4 1/2” ，5”， 5 1/2”.

33. Oilfield Equipment & Tools
Casing
Conform to API standard.
Size: 4 1/2” ，5 1/2”，7”， 9 5/8”， 10 3/4”， 13 3/8” .

34. Oilfield Equipment & Tools
Tubing
Conform to API standard.
Steel grade: J55,N80,P110.
Size: 2 3/8” ，2 7/8”， 3 1/2”.

35. Oilfield Equipment & Tools
Pipe line
Conform to API standard.
Size: 8 3/4” ，10 3/4”， 12 3/4”， 14”， 16”，18”，20”，22”，24”，26”，28”，
30”， 32”，36”，40”，44”，48”，52”，56” .

36. Oilfield Equipment & Tools
Pumping jack
Conform to API standard.
Model : B-type, C-type

37. Oilfield Equipment & Tools
X-mas tree
Conform to API standard.
The rated pressure: 21MPa, 35MPa, 70MPa,105MPa

38. Oilfield Equipment & Tools
Elevator Slip Bushing

39. Oilfield Equipment & Tools
Manual tong Hydraulic power tong Tubing tong

40. Oilfield Equipment & Tools
Fishing tools

41. Drill bit
PDC Drill bit Cone bit

42. Engineering and Technical Service
Service Scope:
Our company has been granted the “A” Certificate and ISO9001 Quality System Certificate. We are
willing to provide the advanced and reliable quality service to you，such as drilling Tech Service,
Directional Well Service, Drilling fluid technology service, logging Technology Service, Cementing
technology service and Down hole remedial operation Technical Service, etc. In the near future, the
service team will develop to the integrative of professional service with the engineering research,
technical service, equipment maintenance and stuff training.

43. Engineering and Technical Service

44. Engineering and Technical Service