Manufacturer, exporter and supplier of a wide range of critical engineering components, electromagnetic brakes, electromagnetic disc brakes, electromagnetic drum brakes, brake liners
Rebound hammer test is conducted to find out the compressive strength of concrete by using rebound hammer. The rebound of an elastic mass depends upon the hardness of the surface when it strikes. When the plunger of rebound hammer is pressed against the surface of the concrete, the spring controlled mass rebounds and the extent of such a rebound depends upon the surface hardness of the concrete.SIGMA TEST & RESEARCH CENTER performs Rebound Hammer Testing.
Manufacturer, exporter and supplier of a wide range of critical engineering components, electromagnetic brakes, electromagnetic disc brakes, electromagnetic drum brakes, brake liners
Rebound hammer test is conducted to find out the compressive strength of concrete by using rebound hammer. The rebound of an elastic mass depends upon the hardness of the surface when it strikes. When the plunger of rebound hammer is pressed against the surface of the concrete, the spring controlled mass rebounds and the extent of such a rebound depends upon the surface hardness of the concrete.SIGMA TEST & RESEARCH CENTER performs Rebound Hammer Testing.
En esta bella presentacion electronica les dare a conocer mi distrito ventanilla, un lugar hermoso y con una gente muy acogedora.despues de esto espero que vayan a visitas y a maravillarse con sus playas y el lugar turistico del lago titicaca
1º Conferência Municipal dos Direitos da pessoa com DeficiênciaRita Brahim
IV Conferência Nacional dos Direitos das Pessoas com DeficiênciaI Conferência Municipal dos Direitos das Pessoas com Deficiência
“A Interação entre os poderes e os entes Federados”
en estas diapositivas hablo sobre mi distrito, pero primero generalizo al habla de lima, luego del callao y termino con ventanilla.
Espero que les guste y les ayude.
1. CURRICULUM VITAE
Name: Bhika.M.More Email ID: bhikamore@gmail.com
Address: Shirud Naka, Near Suryavanshi Building, Mobile Number: +91 9767258511
Amalner, Dist- Jalgaon.
Career Objective:-
To pursue a promising career, with responsibilities and dedication, for development of
organization. Also to grow on personal and professional front, using the opportunities given by
the organization.
Professional Summary:-
Total 4 + years of experience in Quality Testing and R & D Testing. Currently working
as a Junior Engineer in Chassis Brake international, It is a manufacturer of Automotive
Hydraulic Brake system for passenger cars and utility vehicles.
Previously working as a Trainee Engineer in Metallurgy lab of Bosch Chassis System Ind
ia ltd. Also doing testing of Vacuum Booster, CCT, Oil Aging, Metal aging, rubber aging
test, Pad compressibility, Rain test, Rubber Hardness, Thermo gravimetric analysis.
Work Experience:-
Designation: - Jr. Engineer.
Department: - Quality Testing And R & D Testing .
Company:- Chassis Brakes International, India (FBML)
(Formally Bosch Chassis System Ltd, Chakan).
Duration: - OCT 2012 – Till Date.
Responsibilities:-
Working in INERTIA DYNAMOMRTER & FUNCTIONAL TEST group for Brake
Structure and Friction performance activities.
Responsible for testing as per Design Validation plan, engineering test request (ETR),
Quality assurance test request, and Audit test planning. Testing as per required
standards like JASO, JIS, SAE, IS and or as per STD. Durability & endurance testing
of components. Accelerated, Durability, Endurance tests for critical components, like disc
and drum brakes.
Performance, static functional test, tube fitting Strength, RT test, str Integrity test
pressure leakage test, Room temp & high temp Durability, Piston sliding Resistance,
Durability, Endurance, Structural Durability, Auto Adjuster Functioning, Electrical wear
Indicator Test, Dragging Limit, Fluid volume displacements test, Sliding Force,
Operating Force Testing for disc and drum brakes.
2. Responsible for analysis of any permanent failure observed in field and during testing
along with the concerned designer.
Responsible for preparation of work instruction, procedures required in day-to-day
activity.
Having working & operating knowledge of test rig used in engineering test labs like
Endurance test rigs, Environment chambers, Vibration test rig, Static torque rig, Spring
fatigue test rig, Performance test rig, etc used for validation of Servo vacuum booster,
Master cylinder, Caliper disc brake, Drum brakes, valve.
Responsible for fixture preparation for different models for testing.
Monitoring preventive, brake down maintenance and calibration 3 monthly.
Responsible for report preparation & testing of various Brake component including
Product validation, proto sample, & new product testing.
Responsible for handling tool .APG-Acceptance gauge ,TPG-tread plug gauge,
PPG- plane plug gauge, digital micrometer, digital Vernier caliper, height gauge,
snaps gauge.
Responsible for preparation of work instruction, utilization chart, dally rooting
chart, Rejection chart, control chart, rang chart, gap analysis chart, attendance sheet,
First off sheet, any documentation required in day-to-day activity.
Final inspection of Brake Assembly.
Interacting with R&D for QA related problems.
Knowledge of Poke-Yoke, Kaizen, 5S, etc.
Knowledge of Brake Component Inspection.
Previous Experience:-
Designation: Diploma Trainee in Metallurgy lab
Department: Quality Testing Lab.
Company: Bosch Chassis System India Ltd. – Chakan ,Pune.
Duration: OCT 2011 To OCT 2012
Job Profile:-
Rain test, Rubber hardness test metal hardness test
Checking For DFT test. (Dry Film Thickness).
Nickel Plating & powder coating ED costing.
Oil Aging Test & Metal Aging Test Rubber Aging Test.
CCT (complex corrosions chamber) With Immersion Test, Dry & Temp Test, Salt spray
Test.
Pad compressibility test.
Project Completed:-
Y9T (Maruti suzuki) - Performance testing for brake components
A-Entry, X11M (Nissan) - Performance testing for brake components
3. Education Qualification:-
NAME OF EXAM NAME OF SCHOOL/
COLLAGE
BOARD/
UNIVERSITY
PERCENTAGE
D.M.E Govt. Polytechnic, Dhule. MSBTE -MUMBAI 61.97%
I.T.I S.S.P. Paroda DELHI 83.57%
Computer Skill:-
Auto cad 2008.
MS-Office, Typing, MS-CIT.
Personal Details:-
Date of Birth: - 20th December 1986
Sex: - Male
Marital Status: - Married
Hobbies and interest:- Travelling, watching movies,
Declaration
I hereby declare that the above-mentioned information is genuine to the best of my
knowledge.
Date:
Place: Pune (Bhika M More)