Thapar Institute of Engineering & Technology is not only known as top b-tech colleges in India. But also known for its best faculties. Here are some achievements of TIET Faculty . Visit us on-http://www.thapar.edu/ to known more about TIET.
The document provides information about R.C. Patel Institute of Technology (RCPIT). It summarizes the vision, mission, leadership, and history of the institute. RCPIT aims to provide high quality technical education and promote excellence. It was established in 2001 and has grown rapidly, offering undergraduate and postgraduate programs in computer, electronics, mechanical, civil, electrical, and information technology fields. The document outlines the facilities, achievements, and activities supported by RCPIT.
The document provides information about electrical and electronics engineering careers. It defines engineering and the roles of electrical and electronic engineers. It then discusses why one should study electrical and electronics engineering, noting opportunities for high pay, job satisfaction, variety of career paths, intellectual development, and making a positive impact. The document outlines typical career paths, skills needed, potential employers in various industries, pay ranges, and demand in the field. It emphasizes gaining practical experience through internships.
This document discusses the state of engineering education in India. It notes that while the number of engineering institutes and seats have increased dramatically since 1947, there are still large numbers of vacant seats each year. It praises the IITs as islands of excellence that helped build India's infrastructure and industry but argues they need to become more interdisciplinary. It also criticizes the overproduction of engineering graduates without sufficient focus on quality and skills, arguing this has devalued engineering degrees. Overall it calls for higher investment in engineering education with a focus on maintaining quality over quantity.
SayTooLoud presents before you, the rundown of well known engineering courses in India to fathom the baffles all the engineering students face while choosing an engineering stream. This would also help you in making career choices.
This document provides information about the Sadguru Swami Nithyananda Institute of Technology (SSNIT). It was established in 2010 and is affiliated with Kannur University and Kerala Technological University. It is located in Kushal Nagar, Kanhangad and aims to provide quality technical education to develop skilled professionals. The institute is managed by the Shri Nithyananda Vidyakendra and offers 4-year B-Tech programs in Civil Engineering, Mechanical Engineering, Electronics and Communication Engineering, and Computer Science Engineering. It has well-equipped laboratories and facilities across 46 acres of land.
1. The document discusses the educational and career achievements of alumni from IITs and IISc. It highlights companies founded by IIT and IISc alumni like Infosys, Strand Genomics, and Midas Communications.
2. It promotes pursuing an M.Tech degree from IITs and IISc for better career prospects in top companies, specialized knowledge, and entrepreneurial skills. The GATE exam is required for admission to most postgraduate programs in engineering.
3. GATE Forum provides classroom and correspondence coaching for the GATE exam and has helped many students achieve top ranks in recent years.
1. The document is an informational brochure for Sri Shakthi Institute of Engineering and Technology (SIET) that was founded in 2006 to provide quality engineering education.
2. It details the courses offered, world-class infrastructure including labs, library and sports facilities, placements and achievements of students.
3. It also summarizes flagship events organized by SIET like the annual leadership summit that brings together visionaries and young leaders.
SADGURU SWAMI NITHYANANDA INSTITUTE OF TECHNOLOGY, KHANHANGADrajesheriya92
This document provides information about the Sadguru Swami Nithyananda Institute of Technology (SSNIT). It was established in 2010 and is affiliated with Kannur University and Kerala Technological University. It is located in Kushal Nagar, Kanhangad on a 46-acre campus. The institute aims to provide quality technical education and develop skilled graduates. It offers 4-year B-Tech programs in Civil Engineering, Mechanical Engineering, Electronics and Communication Engineering, and Computer Science Engineering. The document provides details about laboratory facilities, library resources, achievements of students and faculty, and extracurricular activities at the institute.
The document provides information about R.C. Patel Institute of Technology (RCPIT). It summarizes the vision, mission, leadership, and history of the institute. RCPIT aims to provide high quality technical education and promote excellence. It was established in 2001 and has grown rapidly, offering undergraduate and postgraduate programs in computer, electronics, mechanical, civil, electrical, and information technology fields. The document outlines the facilities, achievements, and activities supported by RCPIT.
The document provides information about electrical and electronics engineering careers. It defines engineering and the roles of electrical and electronic engineers. It then discusses why one should study electrical and electronics engineering, noting opportunities for high pay, job satisfaction, variety of career paths, intellectual development, and making a positive impact. The document outlines typical career paths, skills needed, potential employers in various industries, pay ranges, and demand in the field. It emphasizes gaining practical experience through internships.
This document discusses the state of engineering education in India. It notes that while the number of engineering institutes and seats have increased dramatically since 1947, there are still large numbers of vacant seats each year. It praises the IITs as islands of excellence that helped build India's infrastructure and industry but argues they need to become more interdisciplinary. It also criticizes the overproduction of engineering graduates without sufficient focus on quality and skills, arguing this has devalued engineering degrees. Overall it calls for higher investment in engineering education with a focus on maintaining quality over quantity.
SayTooLoud presents before you, the rundown of well known engineering courses in India to fathom the baffles all the engineering students face while choosing an engineering stream. This would also help you in making career choices.
This document provides information about the Sadguru Swami Nithyananda Institute of Technology (SSNIT). It was established in 2010 and is affiliated with Kannur University and Kerala Technological University. It is located in Kushal Nagar, Kanhangad and aims to provide quality technical education to develop skilled professionals. The institute is managed by the Shri Nithyananda Vidyakendra and offers 4-year B-Tech programs in Civil Engineering, Mechanical Engineering, Electronics and Communication Engineering, and Computer Science Engineering. It has well-equipped laboratories and facilities across 46 acres of land.
1. The document discusses the educational and career achievements of alumni from IITs and IISc. It highlights companies founded by IIT and IISc alumni like Infosys, Strand Genomics, and Midas Communications.
2. It promotes pursuing an M.Tech degree from IITs and IISc for better career prospects in top companies, specialized knowledge, and entrepreneurial skills. The GATE exam is required for admission to most postgraduate programs in engineering.
3. GATE Forum provides classroom and correspondence coaching for the GATE exam and has helped many students achieve top ranks in recent years.
1. The document is an informational brochure for Sri Shakthi Institute of Engineering and Technology (SIET) that was founded in 2006 to provide quality engineering education.
2. It details the courses offered, world-class infrastructure including labs, library and sports facilities, placements and achievements of students.
3. It also summarizes flagship events organized by SIET like the annual leadership summit that brings together visionaries and young leaders.
SADGURU SWAMI NITHYANANDA INSTITUTE OF TECHNOLOGY, KHANHANGADrajesheriya92
This document provides information about the Sadguru Swami Nithyananda Institute of Technology (SSNIT). It was established in 2010 and is affiliated with Kannur University and Kerala Technological University. It is located in Kushal Nagar, Kanhangad on a 46-acre campus. The institute aims to provide quality technical education and develop skilled graduates. It offers 4-year B-Tech programs in Civil Engineering, Mechanical Engineering, Electronics and Communication Engineering, and Computer Science Engineering. The document provides details about laboratory facilities, library resources, achievements of students and faculty, and extracurricular activities at the institute.
Jahangirabad Institute of Technology (JIT), is an institute under Jahangirabad Educational Trust Group of Institutions approved by All India Council for Technical Education (AICTE) for establishment of integrated campus for offering multiple disciplines in Engineering & Management.
The institute is promoted by a number of professionally successful Indians who are settled abroad who have come together to promote higher education with leadership skills to give back to the community.
The document provides information about the International Conference on Embracing Industry 4.0 Technologies for Sustainable Growth (ICEI 4.0) to be held from February 17-19, 2022. The conference will bring together academics, professionals, students and others to discuss latest developments in areas related to Industry 4.0 such as artificial intelligence, internet of things, blockchain etc. It outlines the objectives, themes, programs and participation details of the conference including registration fees, deadlines and awards. The venue of the conference is MCT's Rajiv Gandhi Institute of Technology in Mumbai, India.
The Department of Computer Science and Engineering conducts a wide range of research from basic to applied technology, including cross-disciplinary research. It has an organizational structure that can respond dynamically to the evolving fields of information technology and information and communication technology. The department trains students in computer science, presenting projects, and delivers skills to students in fields such as algorithms, programming, computer graphics, microprocessors, banking, defense, biometrics, sensor networks, and medical imaging. It introduces students to career opportunities in computer science engineering in various fields and jobs. The department is headed by a director and dean of academics, with professors and assistant professors guiding students.
This resume is for Abhishek Gupta seeking a position in the technical industry that offers professional growth. He has a B.Tech in Electrical and Electronics from Northern India Engineering College in 2015. His strengths include strong communication skills, a positive attitude, and being hardworking and honest. He has participated in various extracurricular activities like model making competitions and science olympiads. His technical knowledge includes power systems and analog/power electronics. He is proficient in programming languages like C++, SQL, and MATLAB. His academic projects include HVDC transmission and maximum power point tracking simulations using MATLAB.
The document provides information about the Entrepreneurship Cell at Regional College for Education, Research and Technology. It discusses the cell's focus on developing students' entrepreneurial spirit. It outlines the institution's past experiences promoting entrepreneurship through activities like business plan competitions and startup showcases. It also describes some successful student startups in areas like carpets, leather goods, and jewelry. Finally, it provides details about the cell's programs, facilities, team, and plans to support entrepreneurship development.
Electronics and communication engineeringM. Raja Reddy
Electronics and Communication Engineering deals with electronic devices, circuits, communication equipment, integrated circuits, analog and digital transmission and reception. It provides a variety of career opportunities in fields like telecommunications, embedded systems, wireless communication, and more. Studying ECE offers benefits like high paying jobs, intellectual development, financial security, and opportunities to work on projects that benefit society. Students are advised to gain practical skills through internships, focus on fundamentals, understand industry trends, assess their aptitudes, and consider higher education options like MTech in related fields. The document provides an overview of the ECE field and advice for students on how to prepare for careers in it.
Mechanical engineering is one of the broadest and most versatile engineering fields, offering a wide variety of career paths and opportunities. It involves applying math and science to solve practical problems through research, design, development, testing, and maintenance of mechanical systems. The document outlines the broad scope and high employment potential of mechanical engineering careers. It discusses why mechanical engineering is a rewarding field that allows one to work on challenging problems, benefit society, and gain financial stability and respect. The document provides an overview of common mechanical engineering coursework and lists government, research, and industry sectors that hire mechanical engineers.
Stanford-India Biodesign is a collaboration between Stanford University and institutions in India to [1] develop leaders in medical technology innovation, [2] create technologies for India, and [3] grow the Indian medical technology industry. The program offers fellowships for Indian citizens to develop technologies, trains engineers and doctors, and works to bridge academia and industry through various courses, internships, and a new innovation center. The goal is to increase India's capacity for medical technology innovation to address the country's healthcare needs.
The best enginnering college in kerala providence college of engineering al...Providence College
Providence College of Engineering
Type Private
Established 2015
Affiliation A P J Abdul Kalam Technological University, AICTE
Chairperson Mariamma George
Principal Santhosh P Mathew
Director KG Balakrishnan
Address Ala, Chengannur, Alappuzha, Kerala, 689122, India
Language English, Malayalam
Website providencecollege.org
Providence College of Engineering Chengannur (established in 2015), commonly known as PRC, is an engineering institute in the state of Kerala, India. It is managed under MGM Charitable trust in Chengannur. The college is affiliated to A P J Abdul Kalam Technological University and All India Council for Technical Education
This document provides information about an organizational study conducted at Keltron Controls in Aroor, India. It includes an introduction outlining the objectives and scope of the study. It then discusses the history and ownership of Keltron Controls, describing how it was established in 1979 as the control and instrumentation division of KSEDC. It has since restructured into four self-profit generating strategic business units supported by common service groups. The document also provides a company profile of Keltron Controls, describing its areas of focus and departments during its early years and how it has since adapted to changing market conditions.
The document provides a summary of an individual's career objective, educational qualifications, technical skills, work experience, and extracurricular activities. It outlines the individual's bachelor's degree in electrical and electronics engineering, work as an intern, training experiences, publications, workshop attendance, and prizes won for projects and paper presentations. It also lists their personal details, skills, areas of interest, and involvement in student organizations and community service initiatives.
Name a career that proffers a huge range of winnings every day and let you impact the world around you. Just think of a job where every day is a new day with thousand of new learning. Yes, that’s engineering. And every Indian must be proud of the fact that we as a country are providing world-class engineering courses. Also, India comes in top 10 lists of countries providing the best engineering courses in the world.
RajaRajeswari College of Engineering, we believe that the tomorrow should always be better than today. It is our aim to provide a technical education that provides to make your career a brighter one as well as make the world a better place.
Admission 2018 Open at Thapar Institute of Engineering and Technology for Undergraduate, Postgraduate and PhD courses. Get online application form 2018 here!
Strategic engineering instituions for entrepreneurship development in indiaSANAL C.WILSON
This document discusses strategic engineering institutions for entrepreneurship development in India. It outlines India's network of higher education institutions in science and technology, including the seven Indian Institutes of Technology, National Institutes of Technology, and over 500 private engineering colleges. Entrepreneurship is described as applying vision, energy, and passion to create and implement new ideas and solutions. Entrepreneurship development in India is needed to address problems like low productivity, unemployment, unequal regional development, and underutilization of resources.
The document lists the members of the Board of Directors of State Bank of India, along with brief backgrounds for each member. The Board includes Arundhati Bhattacharya as Chairman, and Managing Directors Shri B. Sriram, Shri V.G. Kannan, and Shri Rajnish Kumar. It also provides the shareholding breakdown of State Bank of India, with the Government of India as the largest shareholder at 58.59% and Life Insurance Corporation of India as the largest non-promoter shareholder.
INC has been providing work experience opportunities for engineering students in India since 2007. It is committed to fostering international understanding and developing young people. It offers opportunities for undergraduates to gain experience in national and international environments. The document provides information on various engineering fields including biomedical, chemical, civil, electrical, computer, mechanical, and aerospace engineering. It discusses what engineers in each field do and provides examples of companies and colleges relevant to each field.
SRIT GROUP best engineering college in madhya pradesh.We provide engineering, pharmacy, MCA and MBA courses. We also Ranked by times of india and data quest.
D4E - Digitally for Engineers, is a versatile mobile app to facilitate easy networking of industries, academic institutions and engineers across the globe, with an objective to promote effective knowledge sharing and achieve better performance.
Jahangirabad Institute of Technology (JIT), is an institute under Jahangirabad Educational Trust Group of Institutions approved by All India Council for Technical Education (AICTE) for establishment of integrated campus for offering multiple disciplines in Engineering & Management.
The institute is promoted by a number of professionally successful Indians who are settled abroad who have come together to promote higher education with leadership skills to give back to the community.
The document provides information about the International Conference on Embracing Industry 4.0 Technologies for Sustainable Growth (ICEI 4.0) to be held from February 17-19, 2022. The conference will bring together academics, professionals, students and others to discuss latest developments in areas related to Industry 4.0 such as artificial intelligence, internet of things, blockchain etc. It outlines the objectives, themes, programs and participation details of the conference including registration fees, deadlines and awards. The venue of the conference is MCT's Rajiv Gandhi Institute of Technology in Mumbai, India.
The Department of Computer Science and Engineering conducts a wide range of research from basic to applied technology, including cross-disciplinary research. It has an organizational structure that can respond dynamically to the evolving fields of information technology and information and communication technology. The department trains students in computer science, presenting projects, and delivers skills to students in fields such as algorithms, programming, computer graphics, microprocessors, banking, defense, biometrics, sensor networks, and medical imaging. It introduces students to career opportunities in computer science engineering in various fields and jobs. The department is headed by a director and dean of academics, with professors and assistant professors guiding students.
This resume is for Abhishek Gupta seeking a position in the technical industry that offers professional growth. He has a B.Tech in Electrical and Electronics from Northern India Engineering College in 2015. His strengths include strong communication skills, a positive attitude, and being hardworking and honest. He has participated in various extracurricular activities like model making competitions and science olympiads. His technical knowledge includes power systems and analog/power electronics. He is proficient in programming languages like C++, SQL, and MATLAB. His academic projects include HVDC transmission and maximum power point tracking simulations using MATLAB.
The document provides information about the Entrepreneurship Cell at Regional College for Education, Research and Technology. It discusses the cell's focus on developing students' entrepreneurial spirit. It outlines the institution's past experiences promoting entrepreneurship through activities like business plan competitions and startup showcases. It also describes some successful student startups in areas like carpets, leather goods, and jewelry. Finally, it provides details about the cell's programs, facilities, team, and plans to support entrepreneurship development.
Electronics and communication engineeringM. Raja Reddy
Electronics and Communication Engineering deals with electronic devices, circuits, communication equipment, integrated circuits, analog and digital transmission and reception. It provides a variety of career opportunities in fields like telecommunications, embedded systems, wireless communication, and more. Studying ECE offers benefits like high paying jobs, intellectual development, financial security, and opportunities to work on projects that benefit society. Students are advised to gain practical skills through internships, focus on fundamentals, understand industry trends, assess their aptitudes, and consider higher education options like MTech in related fields. The document provides an overview of the ECE field and advice for students on how to prepare for careers in it.
Mechanical engineering is one of the broadest and most versatile engineering fields, offering a wide variety of career paths and opportunities. It involves applying math and science to solve practical problems through research, design, development, testing, and maintenance of mechanical systems. The document outlines the broad scope and high employment potential of mechanical engineering careers. It discusses why mechanical engineering is a rewarding field that allows one to work on challenging problems, benefit society, and gain financial stability and respect. The document provides an overview of common mechanical engineering coursework and lists government, research, and industry sectors that hire mechanical engineers.
Stanford-India Biodesign is a collaboration between Stanford University and institutions in India to [1] develop leaders in medical technology innovation, [2] create technologies for India, and [3] grow the Indian medical technology industry. The program offers fellowships for Indian citizens to develop technologies, trains engineers and doctors, and works to bridge academia and industry through various courses, internships, and a new innovation center. The goal is to increase India's capacity for medical technology innovation to address the country's healthcare needs.
The best enginnering college in kerala providence college of engineering al...Providence College
Providence College of Engineering
Type Private
Established 2015
Affiliation A P J Abdul Kalam Technological University, AICTE
Chairperson Mariamma George
Principal Santhosh P Mathew
Director KG Balakrishnan
Address Ala, Chengannur, Alappuzha, Kerala, 689122, India
Language English, Malayalam
Website providencecollege.org
Providence College of Engineering Chengannur (established in 2015), commonly known as PRC, is an engineering institute in the state of Kerala, India. It is managed under MGM Charitable trust in Chengannur. The college is affiliated to A P J Abdul Kalam Technological University and All India Council for Technical Education
This document provides information about an organizational study conducted at Keltron Controls in Aroor, India. It includes an introduction outlining the objectives and scope of the study. It then discusses the history and ownership of Keltron Controls, describing how it was established in 1979 as the control and instrumentation division of KSEDC. It has since restructured into four self-profit generating strategic business units supported by common service groups. The document also provides a company profile of Keltron Controls, describing its areas of focus and departments during its early years and how it has since adapted to changing market conditions.
The document provides a summary of an individual's career objective, educational qualifications, technical skills, work experience, and extracurricular activities. It outlines the individual's bachelor's degree in electrical and electronics engineering, work as an intern, training experiences, publications, workshop attendance, and prizes won for projects and paper presentations. It also lists their personal details, skills, areas of interest, and involvement in student organizations and community service initiatives.
Name a career that proffers a huge range of winnings every day and let you impact the world around you. Just think of a job where every day is a new day with thousand of new learning. Yes, that’s engineering. And every Indian must be proud of the fact that we as a country are providing world-class engineering courses. Also, India comes in top 10 lists of countries providing the best engineering courses in the world.
RajaRajeswari College of Engineering, we believe that the tomorrow should always be better than today. It is our aim to provide a technical education that provides to make your career a brighter one as well as make the world a better place.
Admission 2018 Open at Thapar Institute of Engineering and Technology for Undergraduate, Postgraduate and PhD courses. Get online application form 2018 here!
Strategic engineering instituions for entrepreneurship development in indiaSANAL C.WILSON
This document discusses strategic engineering institutions for entrepreneurship development in India. It outlines India's network of higher education institutions in science and technology, including the seven Indian Institutes of Technology, National Institutes of Technology, and over 500 private engineering colleges. Entrepreneurship is described as applying vision, energy, and passion to create and implement new ideas and solutions. Entrepreneurship development in India is needed to address problems like low productivity, unemployment, unequal regional development, and underutilization of resources.
The document lists the members of the Board of Directors of State Bank of India, along with brief backgrounds for each member. The Board includes Arundhati Bhattacharya as Chairman, and Managing Directors Shri B. Sriram, Shri V.G. Kannan, and Shri Rajnish Kumar. It also provides the shareholding breakdown of State Bank of India, with the Government of India as the largest shareholder at 58.59% and Life Insurance Corporation of India as the largest non-promoter shareholder.
INC has been providing work experience opportunities for engineering students in India since 2007. It is committed to fostering international understanding and developing young people. It offers opportunities for undergraduates to gain experience in national and international environments. The document provides information on various engineering fields including biomedical, chemical, civil, electrical, computer, mechanical, and aerospace engineering. It discusses what engineers in each field do and provides examples of companies and colleges relevant to each field.
SRIT GROUP best engineering college in madhya pradesh.We provide engineering, pharmacy, MCA and MBA courses. We also Ranked by times of india and data quest.
D4E - Digitally for Engineers, is a versatile mobile app to facilitate easy networking of industries, academic institutions and engineers across the globe, with an objective to promote effective knowledge sharing and achieve better performance.
Madanapalle Institute of Technology & Science (MITS) is a private engineering college located 120 km from Bangalore in Madanapalle, Andhra Pradesh. It was established in 1998 and offers undergraduate and postgraduate programs in engineering, management, and computer applications. MITS has NBA accreditation for several programs, UGC autonomous status, and affiliations with AICTE and JNTUA. The college has over 80 PhDs on faculty and state-of-the-art infrastructure including digital library, computer center, and research centers. It focuses on communication skills, industry training, and research. MITS has placements and MOUs with several companies and regularly conducts activities and assessments to prepare students for placements
Final pramod presentation practical course -for Engineering / Polytechnic Col...15feb1946
Mr. Pramod Sachdeva is an alumnus of IIT-BHU and has extensive experience in the bearing manufacturing industry in both India and the US. He is the chairman of the Entrepreneurship Development Centre at IIT-BHU which provides guidance and training to help students become successful entrepreneurs. The document outlines his educational qualifications and industrial experience. It also describes some of the technical guidance and workshops he provides at IIT-BHU focused on practical skills for engineering students.
- Electrical engineering deals with the study and application of electricity, including generation, transmission, distribution and consumption of electrical energy.
- It is a broad field that encompasses power generation, circuit design, electronics, control systems, and more. Electrical engineers work on systems from household to industrial applications.
- The department of electrical engineering at GNDEC has been running UG and PG programs since the 1950s. It has well equipped labs and focuses on research, student placements, and producing strong alumni.
This document provides information about the NM Institute of Engineering & Technology (NMIET) in Bhubaneswar, Odisha, India. It states that NMIET was established in 2004 and is approved by the All India Council for Technical Education and affiliated with Biju Patnaik University of Technology. It offers undergraduate and postgraduate courses in engineering and management. The document provides details on NMIET's infrastructure, faculty, admissions process, student achievements, placement record, laboratories, library, and extracurricular activities. It aims to appeal to companies to recruit students from NMIET.
The document discusses higher education in engineering in India. It provides information on engineering technician and technologist roles, qualities of students suited for engineering, popular branches of engineering, and top engineering colleges in India. It also discusses entrance exams, career paths, salaries, and potential employers for engineering graduates.
ASME is an international professional organization that promotes mechanical engineering. It provides opportunities for students including design competitions, internships, e-mentoring, scholarships, and access to technical references through its e-library. The IIT Kharagpur student chapter of ASME organizes various programs for students to gain experience and connect with professionals in mechanical engineering.
This document provides information about Apex Group of Institutions in Rajasthan, India, which was established 50 years ago. It lists the names and positions of important people associated with Apex. It then provides brief descriptions and contact information for the various institutions that make up Apex, including engineering, management, and polytechnic colleges. It discusses programs and certifications offered to students to enhance their employability. Finally, it discusses the promising future of engineering in India and skills that will be important for future careers.
National Institute of Foundry and Forget Technology (NIFFT), RanchiNIFFT Ranchi
This presentation highlights the legacy of National Institute of Foundry and Forge Technology (NIFFT) as a premier research institute in metallurgical, manufacturing, foundry, and forging sectors. This presentation was presented on 23rd December 2013 to JS (NIT's) MHRD, Govt. of India.
Electrical engineering is a field of engineering. It's based on electricity and devices.
Sviet college provide this course with high placement and practical understanding of the course with highly qualified professionals.
https://sviet.ac.in/b-tech-electrical-engineering/
This a website link for the admission
The document is a brochure for the Department of Training and Placement at National Institute of Technology in Srinagar, India. It provides information about the various engineering programs offered at NIT Srinagar, facilities available, recruitment procedures, previous recruiters, and contact details. It includes messages from the Director and Head of the Training and Placement Department welcoming recruiters to campus. Program details, course offerings, and lab facilities are provided for departments like Chemical Engineering, Civil Engineering, Computer Science, Electrical Engineering, Electronics and Communication Engineering, Information Technology, Mechanical Engineering, and Metallurgical and Materials Engineering. Information is also given about campus life, news coverage of NIT Srinagar, alumni, and how to reach the campus
Echelon Institute Of Technology is the best Engineering College In Faridabad Delhi NCR. Get in touch For admission details info on placement & ranking.
Specialized placement agencies like HARLEY DAVIDSON , GMR group, CPR visited our institution and took great interest in training and placement of no: of students in diploma wing. However for B.TECH students another specialized agency IGNIVA EDUVENT g
DPGITM (A Unit of Ch. Partap Singh memorial charitable Trust) is an engineering Institute with a lush green campus having excellent infrastructure, Experienced Faculty, Well Furnished Classrooms, equipped with Audio-Visual aids , Well Stocked Library, Well Equipped Labs and Workshop with Eco-Friendly Environment in heart of Gurgaon (NCR)
Function of science is to Observe ,Discover and to Formulate the laws of nature. Approach for excellence in science also need creation of Infrastructure facilities and Environment
Function of Technology is to Deal with means of application of science and scientific content which is Universal and Application conditioned by environment of application. Excellence in Technology is location specific.
Main Function of Engineering is to convert resources available in Goods and services needed by society
Realistic and optimal solution besides due Weightage to existing parameters involved in lies in Scientific , Technological ,Economic , Social, Ethical , Management , political
The document is a brochure for the National Institute of Technology Arunachal Pradesh placement program for 2018-19. It provides information on why companies should recruit from NIT Arunachal Pradesh, the campus recruitment process, past recruiters, details about Arunachal Pradesh and the institute. It outlines the admission procedure, departments, infrastructure, student activities, projects, internships, placement statistics and messages from the director and placement in charge. It summarizes the key information companies would need to know about recruiting students from NIT Arunachal Pradesh.
Similar to Best Faculty at THAPAR INSTITUTE OF ENGINEERING & TECHNOLOGY (20)
35TH CONVOCATION OF THAPAR INSTITUTE OF ENGINEERING & TECHNOLOGY (TIET)Priyanka Sharma
The 35th Convocation of Thapar Institute of Engineering & Technology (TIET), Patiala, was held on Nov 8, 2021. At this Convocation, a total of 2319 degrees are being awarded: 80 Ph.D., 179 M.E./M.Tech., 103 M.Sc., 65 M.C.A., 26 M.A., 190 M.B.A, 35 Integrated B.E./M.B.A and 1672 B.E./B.Tech. Click here to read more.
Placement Highlights from LM Thapar School of ManagementPriyanka Sharma
LM Thapar School of Management is considered the epitome of learning and development for students who aspire to seek admissions in areas such as engineering, technology and management. Click here to known more about placement highlight of LMTSM.
Top 10 Engineering colleges in India based on their reputation and research in the field. Click here to known the list of top 10 Engineering colleges in India.
The document lists the top 10 MBA colleges in India, including the Indian Institute of Management which has several campuses around India and is considered the best MBA program in India. It also discusses other highly ranked schools like the Indian School of Business, XLRI-Xavier School of Management, and Narsee Monjee Institute of Management Studies which have multiple campuses and offer MBA programs and other management courses. The list provides an overview of 10 top colleges for MBA degrees in India.
With the growth in the digital sector, computer science engineering courses have been proved to be the most lucrative and abundant opportunities for students. Here is the list of top 5 computer engineering colleges in India.
Get admission in BA/B.Sc./BBA / B.Com Liberal arts Programmes - TSLAS Priyanka Sharma
If you want to take admission in BA/B.Sc./BBA / B.Com Liberal arts Programmes then Thapar School of Liberal Arts & Sciences is the best liberal arts college in India. Click here to known more about BA/B.Sc./BBA / B.Com Liberal arts Programmes.
Thapar school of liberal arts & sciences- facultyPriyanka Sharma
This document lists the faculty members of Thapar School of Liberal Arts & Sciences, providing information on their educational background, position, areas of research, and contact information. It introduces 13 faculty members, including their PhD institution and field of study, current role at Thapar Institute of Engineering & Technology, research interests, and email contact. The faculty cover a wide range of disciplines including neurobiology, engineering psychology, botany, political science, nanotechnology, metaphysics, philosophy of education, art theory, economics, and history.
Mobius foundation best ngo in india, ngo working for environmentPriyanka Sharma
Mobius Foundation is the Best NGO in India, working on various Environment and Sustainability projects such as Mobile Health Camp, Sanjeevani, Project Aakar, Gyan Anant Vidyalaya, World Environment School, Coorg, ICSE etc.
Mobius foundation committed to build a sustainable future convertedPriyanka Sharma
Mobius Foundation is a Best NGO in India that is working towards environmental sustainability. In a world struggling with scarcity, the foundation believes that environmental conservation is the key to a better future and a greener planet. for more deatils visit us on-https://www.mobiusfoundation.in/reports/
The Mobius Foundation is the eco friendly ngo promoting environmental sustainability through sustainable, relevant solutions that enable communities to break longstanding practices that are detrimental to human existence on Earth.
Mobius foundation (best NGO in India) Project Aakar shaping the reproductive behavior is committed to sustainability. Thus made family planning as its entry point and implemented it into high fertility districts- Barabanki & Bahraich
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Walmart Business+ and Spark Good for Nonprofits.pdfTechSoup
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
Main Java[All of the Base Concepts}.docxadhitya5119
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...PECB
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...Diana Rendina
Librarians are leading the way in creating future-ready citizens – now we need to update our spaces to match. In this session, attendees will get inspiration for transforming their library spaces. You’ll learn how to survey students and patrons, create a focus group, and use design thinking to brainstorm ideas for your space. We’ll discuss budget friendly ways to change your space as well as how to find funding. No matter where you’re at, you’ll find ideas for reimagining your space in this session.
Chapter wise All Notes of First year Basic Civil Engineering.pptxDenish Jangid
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
2. Thapar Institute of Engineering & Technology is not
only known as top b-tech colleges in India. But also
known for its best faculties. Here are some
achievements of TIET Faculty .
3. Achievements
of TIET Faculty
• TI Associate Professor Dr.
Sanjay Kumar and his 3 team
members contributed
innovative ideas to fight
COVID-19 in the online
competition, Fight Corona
IDEAthon organized by MHRD
in association with AICTE &
other Government firms.
4. Achievements
of TIET Faculty
• Dr. Sanjai Saxena, Prof.
Biotechnology, TIET,
delivered a LIVE talk on
Recent Trends in Science &
Technology at International
Faculty Development
Program.
5. Achievements
of TIET Faculty
• TI Assistant Professor, Dr. Harish
Garg joined as the Associate Editor
- Kybernetes, Emerald - an
international journal of high
repute.
• Holding a PhD degree in Applied
Mathematics with specializations
in fuzzy reliability, evolutionary
algorithms, decision-making
theories, multi-objective
optimization, and fuzzy
optimization. He has published
over 200 SCI papers and one of the
worldwide renowned researchers
in the field of fuzzy decision
making.
6. Achievements
of TIET Faculty
• Indian Council of Medical Research
(ICMR) - Center for Innovation and
Bio-Design (CIBioD), PGIMER
(Chandigarh) funded Thapar
Institute's project “Aarogya
Prahari- Tracking and Data Analysis
of Patients for Predictive
Management” through STEP - TIET.
• Mr. Harpreet Singh (Assistant
Professor - Computer Science and
Engineering Department) served as
the Project Coordinator and plans
to launch a screening tool and
predictive management using
machine learning for Covid-19, HIV,
Hepatitis and Tuberculosis (TB)
patients.
7. Achievements
of TIET Faculty
• TIET faculty as national
opinion movers - Dr.
Debabrata Deb, Assistant
Professor, SPMS: One of his
opinion pieces got
published in THE
ARMCHAIR JOURNAL,
Friday, July 17, 2020. To
read complete article, click
here.
8. Alumni
Achievements
• 'They pursued their dreams
with dedication, hard work
and grit. That's all it takes
to create history!'
• Thapar Institute of
Engineering and Technology
takes immense pride to
have mentored Mr. Manoj
Ahuja and Mr. Iqbal Chahal,
who are carving a niche as
the Chairperson of CBSE
and the BMC Commissioner
respectively.
9. Alumni
Achievements
• Proud to have mentored the
vanguard of victory for the
nation!
• TI alumnus Commodore
Rakesh Anand conferred the
Distinguished Alumni award
by the Senate of Thapar
Institute of Engineering and
Technology. We are proud of
his 30+ years of distinguished
service to the Indian Navy
showcasing outstanding
management capabilities and
business leadership skills.
11. Alumni
Achievements
• TI Alumnus Mr. Ravinder Singh
Dhillon holds a stellar career in
the power sector spanning over
36 years.
• Significantly contributing to
macro planning at the Central
Electricity Authority and
designing power generating
equipment with Bharat Heavy
Electricals Ltd, he has also played
a major role in power projects
for geographical diversification
by cross border funding.
12. Alumni
Achievements
• TI alumnus and former IAS
Officer, Anirudh Tiwari BE
Electronics & Communication,
1983-1987 batch has now been
promoted to the position of
Additional Chief Secretary by the
Government of Punjab.
13. Alumni
Achievements
• TI alumnus Er. Daljit Inderpal
Singh Grewal successfully
joined as the Director
(Distribution), Punjab State
Power Corporation Limited.
• Having served as an
Engineer-in-Chief
(Distribution) - Central Zone,
Chief Engineer - South Zone
& SE Sangrur, and Senior Xen
(Grid Maintenance
Distribution) - Sangrur, his
diverse 35 years' experience
will help him bring significant
value in his new role.
14. Alumni
Achievements
• On a mission of accomplishing
greater milestones, TI Alumnus
Mr. DPS Kharbanda took charge
as Director & Special Secretary -
Sports and Youth Services and
Special Secretary &
Commissioner, NRI Affairs
(Punjab).
15. Alumni
Achievements
• Making Thapar Institute
proud with his terrific
industry achievements!
• TI alumnus Mr. Gurdev
Singh Nagi took charge as
the Chief Engineer at
Punjab State Power
Corporation Limited
(PSPCL), Patiala).
16. Alumni
Achievements
• TI alumnus Mr. Shailesh
Aggarwal took charge as
Vice Chairman -
Confederation of Indian
Industry (CII) (Himachal
Pradesh).
• A reputed industry stalwart
with distinguished services
as President - Baddi
Barotiwala Nalagarh
Industry Association.
17. Alumni
Achievements
• TI Alumnus Mr. Yogesh
Tandon got appointed as
the Director (Technical) at
Punjab State Transmission
Corporation Ltd.
18. Alumni
Achievements
• Abhishek Prasad from Electrical
Engineering, batch 2015-19,
secured outstanding 3.77 GPA out
of 4 in the 30 credits Online Post
Graduate Program in Artificial
Intelligence & Machine Learning
(June-2019 to July-2020)
conducted by Electronics and ICT
Academy of National Institute of
Technology (NIT) Warangal in
association with Edureka as an
industry partner - an initiative by
Ministry of Electronics and
Information Technology
(Government of India). He got
selected in this Post Graduate
Program in top 42 out of 10,145
applicants with a scholarship of Rs.
112,491(One Lakh Twelve
Thousand Four Hundred Ninety-
One Rupees Only).