The document provides product information for the B400 Elite elevator and conveyor belt alignment monitoring system. The B400 Elite control unit detects misalignment of belts to prevent downtime and explosions. It can monitor alignment in one or two elevators. Key features include alarm and shutdown relays, LED status indicators, easy installation, and approvals for hazardous locations. Technical specifications list the models, approvals, enclosure, power supply, contacts, and dimensions. It can be used with up to four alignment sensors.

1. FICHE PRODUIT
Product Information
SETEM
BRAIME B400 ELITE
B400 ELITE
Elevator & Conveyor Belt
Alignment Monitoring System
B4004V4CAI - B400 Elite control unit
Supply:12 to 24 DC
Ex II 2D T125°C zone 21 & 22
B4004V46CAI - B400 Elite control unit
Supply: 95 to 250VAC /12 to 24 DC
Ex II 3D T125°C zone 22
APPLICATION
The B400 Elite control unit detects the dangerous
misalignment of belts, preventing costly downtime
and helping to eliminate the risk of exposion.
The B400 Elite works with up to four sensors
(TS1V4A, BS15V10AI OR BS25V10AI) situated along
the side of the belt to monitor belt tracking.
KEY FEATURES ATEX zone 21 & 22
The B400 elite can monitor the alignment of a belt
in one elevator, both at the top and the bottom, or in
two separate bucket elevators
Alarm and Shut down Relays with time delay
options
Control unit LEDs indicate the running, alarm and
shutdown status of each elevator
Easy on-site Installation
Full system test feature
Voltage free relay contacts CLASS 2 Div. 1
IP 66, Nema 12 Groups E, F& G
ATEX, IECEx & CSA Approved
OPTIONS
RS485 serial communication
Detailed specification, wiring diagrams and
installation/operating instructions available immediately
upon request. Please refer to instruction manual for correct installation.
Information subject to change or correction. February 2006.
4B BRAIME ELEVATOR COMPONENTSLTD Hunslet Road, Leeds, LS10 1JZ,UK
Tel:+44 (0) 113 246 1800 Fax: :+44 (0) 113 243 5021 4b-uk@go4b.com www.go4b.com

2. FICHE PRODUIT
Product Information
SETEM
BRAIME B400 ELITE
TECHNICAL SPECIFICATIONS
Model B4004V46CAI B4004V4CAI
ATEX & IECEx Zone 22 Ex II 3D ATEX & IECEx Zone 21 Ex II 2D
T125°C T amb -15 to +50°C T125°C T amb -15 to +50°C
Approval BAS03ATEX0674X & CSA BAS03ATEX0674X & CSA
Enclosure Polycarbonate
Supply 95 to 250 VAC 12 to 24 VDC 12 to 24 VDC
Rating 10 VA
Protection IP 66
Contact relay ALARM A: 1 contact NO 8 A 250 Vac
ALARM ALARM B: 1 contact NO 8 A 250 Vac
Contact relay STOP A: 1 contact NO 8 A 250 Vac
STOP STOP B: 1 contact NO 8 A 250 Vac
Dimension HxLxD: 246 x 188 x 102 mm
Entry 2 holes drilled to dia. 28 mm
Fixt point 222 x 102 mm
Weight 1,3 Kg
TS1V4A
BS15V10AI OR BS25V10AI
Please refer to instruction manual for correct installation.
Information subject to change or correction. February 2006.
4B BRAIME ELEVATOR COMPONENTSLTD Hunslet Road, Leeds, LS10 1JZ,UK
Tel:+44 (0) 113 246 1800 Fax: :+44 (0) 113 243 5021 4b-uk@go4b.com www.go4b.com