Bring these automatic electrochlorinators to fulfill your small to medium facilities for the disinfection of drinking water. It can be used multi-purposely like for medium-sized hotels, hospitals, educational institutions for drinking water, small water parks, cooling water circuits, and fire water storage tanks and many more,
Artificial intelligence in the post-deep learning era
Automatic electrochlorinator | Small to Medium water treatment Facility
1. Features
AUTOMATIC
ELECTROCHLORINATOR
CONTINUOUS
DISINFECTANT GENERATOR
The Automatic Electrochlorinators are
compact low capacity systems which produce
Sodium Hypochlorite continuously from
Saltwater or seawater, by the process of
Electrolysis. Sodium Hypochlorite is a strong
disinfectant and is useful in disinfecting
Drinking water and Waste Water. There is no
need to buy and stock Gas or Liquid Chlorine.
This is a wall mounted compact model with
automatic control.
Sodium Hypochlorite is a strong disinfectant
that kills all the pathogens which lead to
water borne diseases like cholera, typhoid,
paratyphoid etc. Our system also leaves some
residual Sodium Hypochlorite in water to
prevent bacteria from getting picked up
during storage or redistribution.
Advanced, self sustaining in Hotels, Hospitals,
and Educational institutions for Drinking water
l
l
l
l
l
l
l
l
l
Smaller – easier to install in confined
spaces
Requires less manpower and human
intervention.
Advanced and more efficient power
supply.
Can take wide voltage and frequency
fluctuations.
Microprocessor based controller.
Salt level indication
Better weather proofing, corrosion proof.
Lesser moving parts, so less wear and tear
Long-life Titanium Electrolyzer
2. üSmall to Medium water treatment facilities for
disinfection of drinking water
üSmall Waste water, Effluent and Sewage
treatment.
üMedium sized Hotels, Hospitals, and
Educational institutions for Drinking water.
üDisinfection in small Water parks, Cooling
water circuits, Fire water storage tanks.
Leaders in water treatment solutions using
Sodium Hypochlorite Generators (SHG)
Application
Operation
¢Water is to be filled through the float valve up
upto the marked level.
¢Put good clean salt as indicated in the system.
¢Mix the salt properly.
¢Switch on the power supply.
¢The brine metering pump will start and pump
brine into the Electrolyzer.
¢The DC current applied across the anode and
cathode of the cell will start the Electrolysis
reaction in the diluted brine solution.
¢Now the cell converts the brine solution into
Sodium Hypochlorite
¢The Sodium Hypochlorite (NaOCl) will flow
out through a tube into the NaOCl tank.
¢A Salt meter indicates the concentration of salt.
¢The NaOCl tank is provided with a level
controller
¢Once the NaOCl reaches the upper limit the
level controller will stop the Electro
Chlorinator System.
¢A NaOCl metering pump is independent of the
system.
¢As the level of NaOCl reduces due to the
dosing, the level controller will restart the
system
AUTOMATIC ELECTROCHLORINATOR
System Specification
Model No.
Active chlorine Generated
Process
Hypochlorite Strength(in Brine system)
Water Consumption
Salt Consumed
Power Consumed
AC current Input
PCP15
Grams/hr
0.700kwh/hr
Continuous
6 -8.0 Gpl
70grams/hr
2liter/hr
230V, 50 Hz
PCP25
25Grams/hr
0.900kwh/hr
Continuous
6 -8.0 Gpl
120grams/hr
2.5liter/hr
230V, 50 Hz
PCP10
10Grams/hr15
0.500kwh/hr
Continuous
6 -8.0 Gpl
50grams/hr
1.5liter/hr
230V, 50 Hz
Office : B/305, Okhla Industrial Area,Phase I, New Delhi 110 020
Email : sales@pristinewater.in, support@pristinewater.in
Tel + 91 11 32712655 + 91 11 26811710: Telefax:
Website : www.pristinewater.in