2. 15 prohibited
items in cone
crusher
operation
1. iron material feeding is prohibited.
2. No starting or stopping crusher with materials.
3. Excessive constant current and low voltage are forbidden to
operate the machine.
4. When the machine has abnormal sound, continue to operate.
5. When the machine is in operation, check and adjust the machine.
6. Eccentric feeding is prohibited.
7. It is forbidden to enter bulk materials in the crushing chamber
(exceeding the maximum feeding size in the instruction).
8, do not adjust the ring runout;when runout , adjust the large
discharge port.
9. It is forbidden to operate the cone crusher when the locking nut
of the adjusting seat is not locked tightly.
10. Do not adjust the discharge port with materials.
11. It is forbidden to operate the cone crusher when the oil level in
the lubrication station is low.
12, It is forbidden to operate the cone crusher when the lubricating
oil temperature below 25 ℃.
13, It is forbidden to operate the cone crusher and keep oil pump
running when the lube oil temperature is higher than 55 ℃.
14. Do not operate the cone crusher when the lubricating oil filter is
blocked.
15, do not lubricate station alarm light when the operation cone
broken.
3. 22 executing
items in cone
crusher
operation
1, must continue to uniform center feeding, crowded
feeding can improve work efficiency.(per shift)
2. Check whether there are copper and iron chips on the
oil return filter screen.(per shift)
3. Check the oil level of lubricating oil.(per shift)
4. Check and record the pressure of lubrication system
and hydraulic system, and check whether the filter
element is blocked.(per shift)
5, check the wear condition of the lining.(per shift)
6. Check the status of all bolts and their fasteners.(per
shift)
7, check the lubricating oil pollution.(per shift)
8. Check whether the discharge area is unobstructed
and remove the accumulated materials and sundries on
the rack.(per shift)
9. Grease the adjusting ring when it is not locked.(per
week)
10. Check and tighten the triangle belt.(per week)
11. Check and deal with all pipelines to avoid oil
leakage.(per week)
4. 12. Check and tighten the distributor plate bolts.(per week)
13, check the cone crusher and lubrication station electrical
chain.(per week)
14. During the operation of the equipment, check whether the
foundation subsidence or steel frame deformation causes the
suspension of individual shock absorber at the bottom, and
the machine swing is large because there is no force.(per
week)
15. Check accumulator pressure.(per week)
16. Check and repair the frame guard and rib guard.(replace
the liner every time)
17. Check the wear condition of spherical tile.(replace the
liner every time)
18. Check the wear condition of cone sleeve and straight
sleeve.(replace the liner every time)
19. Check the wear condition of the upper friction
plate.(replace the liner every time)
20. Check the wear condition and clearance of bevel
gears.(replace the liner every time)
21. Check oil number and quantity of lubrication
station.(regular inspection)
22, check the feed oil pressure, oil flowrate, the oil
temperature (not less than 25 ℃), oil temperature (not more
than 55 ℃), the locking cylinder and the cylinder pressure
data of insurance after the lubrication station started
22 executing
items in cone
crusher
operation
5. Shanghai Shuosen Mining Machine Co.,Ltd,
it is one of the high-tech group company with the
technology research of environmental engineering
application , processing and manufacturing equipment .Our
traditional business cover three modules: large and
medium-sized stone crushing equipment series, powder
grinding equipment series and ore beneficiation equipment
series. New business mainly includes solid-waste
comprehensive treatment and contaminated soil
remediation field.
Shanghai Shuosen welcome your visit anytime, and
sincerely hope to cooperate with you !
www.shuosencrusher.com
sarahzzdshj@gmail.com