1. 3 Factors affecting the output
of cone crusher
Shanghai Shuosen Mining Machine Co.,Ltd
SHUOSEN
2. 1.the number of times of the swing of the cone
The swing times of the crushed cone is one of the key factors affecting the
crusher productivity.
Because of the limitation of the meshing Angle of the crushing cavity and the
parallel ore discharge area, the crushed ore is discharged along the taper
inclined plane mainly by gravity and vibration.When the number of spindle
rotation increases, the ore is easy to be discharged, but the number of
rotation is too high, which is not conducive to ore discharge, sometimes
resulting in faster speed and unable to produce.Therefore, the number of
swing of the broken wall has a certain constraint on the improvement of
productivity.
3. 2.The length of the parallel crushing area
The parallel crushing area is the guarantee area of uniform particle size of
cone crusher.The crushing capacity is related to the material thickness in the
parallel zone, and the material thickness is directly related to the size of the
ore outlet.The increase of the length of the parallel zone is beneficial to grain
size control, but the ore discharging capacity is relatively reduced.The length
of the parallel zone decreases, which is beneficial to ore discharge, but the
particle size of ore crushing is not easy to guarantee.
At the same time, because of the crusher productivity is mainly related to the
ore properties, the performance of the machine, specifications and crusher
operating conditions and other factors, but also related with the crusher
configuration in the production process, therefore, in other conditions
unchanged, under the condition of changing operating conditions (adjust the
cone crusher discharging mouth size), will change the productivity of crusher.
4. 3.The size of engagement Angle
The included Angle between the rolling mortar wall and the crushing wall of
the cone crusher is called the meshing Angle.Meshing Angle generally take
22 and 23 °, the maximum is 27 °.
From the feeding port to the discharge port, the crushing chamber type is
affected by the engagement Angle and limited by the height of the crusher.
The relative change of the crushing chamber capacity of the crusher has a
certain impact on the crushing efficiency.
Theoretically, if the engagement Angle is too large, the ore will easily slip in
the crushing chamber, reducing the production capacity and increasing the
wear and power consumption of the lining plate.If the engagement Angle is
too small, the crushing cavity will be too small and the amount of ore
contained will be relatively reduced, which will affect the output and increase
the manufacturing cost of the equipment and the height of the machine.
5. Shanghai Shuosen Mining Machine Co.,Ltd
www.shuosencrusher.com
sarah@shuosencrusher.com
THANK YOU