şanzuman

1. a 1Removing and installing main shaft and countershaft AR26.50-B-0001C.fm
Gearbox 715.5
With CODE (GS1) “Manual” gearbox shift drive
With CODE (GS2) Gear shift
With CODE (GS3) Gearbox hydraulic shift drive
Gearbox 715.520 /540 With CODE (GS2) Gear shift
AR26.50-B-0001C.fm Removing and installing main shaft and countershaft 02.01.01

2. a 2Removing and installing main shaft and countershaft AR26.50-B-0001C.fm
1 Oil pipe
2 l Lifting device
3 Main shaft
4 Input shaft
5 Countershaft
W26.50-0049-09

3. a 3Removing and installing main shaft and countershaft AR26.50-B-0001C.fm
e d Removing and installing
1 Remove center part of gearbox AR26.40-B-2000A
2 Remove input shaft and countershaft bearing
cover
AR26.30-B-1010A
3 Remove seal and snap-ring (under input shaft
support cover) and remove oil pipe (1)
iInstallation: Install a new seal
4 Remove shift forks and coupling rails. i In case of gearbox 715.500/510 /520/540
with code GS2
AR26.60-B-0010A
i In case of gearbox 715.520/540 with
codes GS1 and GS3
AR26.60-B-0010B
5 Attach lifting device (2) l
i In case of main shaft with grooves
715 589 01 59 00
l
i In case of main shaft without grooves it is
necessary to remove planetary group first.
715 589 03 59 00
6 Press countershaft (5) to a side (arrow) and lift
out main shaft (3).
i To facilitate disassembly, lift input shaft (4)
approx. 10 mm (with a jack or something sim-
ilar).
iInstallation: Lubricate taper roller bear-
ing with general purpose grease.
BR00.45-B-1003-06A
7 Remove countershaft (5) upwards. iInstallation: Lubricate taper roller bear-
ing with general purpose grease.
BR00.45-B-1003-06A

4. a 4Removing and installing main shaft and countershaft AR26.50-B-0001C.fm
Repair products
8 Install in the reverse order.
Lifting device Lifting device
Number Designation Order number
BR00.45-B-1003-06A General purpose grease
715 589 01 59 00 715 589 03 59 00