This document provides instructions for disassembling a 336F excavator travel motor. It lists 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, springs, seals, relief valves, plugs and more. Precautions are provided to watch for spring forces and contain fluids. Special tools are listed that are required for tasks like removing bearings and releasing brake pistons. The detailed process is intended to fully break down the travel motor into its core parts and components.
Caterpillar cat 336 f l excavator (prefix rbc) service repair manual (rbc0000...fjsjekdmmeme
This document provides instructions for disassembling the travel motor on 336F L and 336F LN excavator models. It lists the required tools and presents 27 steps to remove components such as the motor head assembly, springs, seals, relief valves, plugs and port plate. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar cat 336 f l excavator (prefix nbs) service repair manual (nbs0000...fjsjekdmmeme
This document provides disassembly instructions for a 336F excavator travel motor. It lists 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Various tools are required to remove parts and release spring forces safely. Detailed illustrations accompany each step to show how to disassemble the individual components of the travel motor.
Caterpillar cat 336 f excavator (prefix wcf) service repair manual (wcf00001 ...fjkskedmme
The document provides disassembly instructions for a 336F excavator travel motor over 27 steps. It details removing components like the motor head assembly, piston assemblies, barrel assembly, swashplate, and more. Tools required include a transmission repair stand, lifting eye assembly, driver group, and various bolts, pins and seals. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar cat 336 f excavator (prefix lcl) service repair manual (lcl00001 ...fjsqazkekdmme
This document provides instructions to disassemble a 336F and 336F L excavator travel motor. It lists the required tools and describes 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal components. Marks should be made on components to ensure proper reassembly. Care is needed when removing parts to avoid damage and release of stored spring forces.
Caterpillar cat 336 f l excavator (prefix kft) service repair manual (kft0000...fjsjekdmmeme
This document provides instructions for disassembling a 336F excavator travel motor. It lists 27 steps to completely disassemble the travel motor. The steps include removing the motor head assembly, springs, seals, plates, pistons, bearings, and other internal components. Precautions are provided to watch for spring forces and contain fluids during disassembly. Special tools are listed that are required to properly disassemble parts like retaining rings and pistons.
Caterpillar cat 336 f l excavator (prefix rbc) service repair manual (rbc0000...didkkmmdm
This document provides instructions for disassembling the travel motor on a 336F LN excavator. It describes 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, various plugs, seals, springs, relief valves and more. Detailed illustrations accompany each step to show how to properly remove each part. Safety precautions are provided throughout to warn of potential hazards like released spring forces during disassembly.
Caterpillar cat 336 f l excavator (prefix rbc) service repair manual (rbc0000...fjsjekkdmnem
The document provides instructions for disassembling the travel motor on a 336F LN excavator. It describes 27 steps to remove parts like the motor head assembly, springs, seals, relief valves, plugs and spools. Tools required include a transmission repair stand, lifting eye assembly, driver group and various bolts, plugs and seals. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar cat 336 f ln excavator (prefix rbc) service repair manual (rbc000...fjsjekkdmnem
The document provides instructions for disassembling a 336F LN excavator travel motor. It lists 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Tools required include a transmission repair stand, lifting eye assembly, driver group, and various bolts, pins and seals. The disassembly process is detailed with illustrations to ensure correct reassembly.
Caterpillar cat 336 f l excavator (prefix rbc) service repair manual (rbc0000...fjsjekdmmeme
This document provides instructions for disassembling the travel motor on 336F L and 336F LN excavator models. It lists the required tools and presents 27 steps to remove components such as the motor head assembly, springs, seals, relief valves, plugs and port plate. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar cat 336 f l excavator (prefix nbs) service repair manual (nbs0000...fjsjekdmmeme
This document provides disassembly instructions for a 336F excavator travel motor. It lists 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Various tools are required to remove parts and release spring forces safely. Detailed illustrations accompany each step to show how to disassemble the individual components of the travel motor.
Caterpillar cat 336 f excavator (prefix wcf) service repair manual (wcf00001 ...fjkskedmme
The document provides disassembly instructions for a 336F excavator travel motor over 27 steps. It details removing components like the motor head assembly, piston assemblies, barrel assembly, swashplate, and more. Tools required include a transmission repair stand, lifting eye assembly, driver group, and various bolts, pins and seals. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar cat 336 f excavator (prefix lcl) service repair manual (lcl00001 ...fjsqazkekdmme
This document provides instructions to disassemble a 336F and 336F L excavator travel motor. It lists the required tools and describes 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal components. Marks should be made on components to ensure proper reassembly. Care is needed when removing parts to avoid damage and release of stored spring forces.
Caterpillar cat 336 f l excavator (prefix kft) service repair manual (kft0000...fjsjekdmmeme
This document provides instructions for disassembling a 336F excavator travel motor. It lists 27 steps to completely disassemble the travel motor. The steps include removing the motor head assembly, springs, seals, plates, pistons, bearings, and other internal components. Precautions are provided to watch for spring forces and contain fluids during disassembly. Special tools are listed that are required to properly disassemble parts like retaining rings and pistons.
Caterpillar cat 336 f l excavator (prefix rbc) service repair manual (rbc0000...didkkmmdm
This document provides instructions for disassembling the travel motor on a 336F LN excavator. It describes 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, various plugs, seals, springs, relief valves and more. Detailed illustrations accompany each step to show how to properly remove each part. Safety precautions are provided throughout to warn of potential hazards like released spring forces during disassembly.
Caterpillar cat 336 f l excavator (prefix rbc) service repair manual (rbc0000...fjsjekkdmnem
The document provides instructions for disassembling the travel motor on a 336F LN excavator. It describes 27 steps to remove parts like the motor head assembly, springs, seals, relief valves, plugs and spools. Tools required include a transmission repair stand, lifting eye assembly, driver group and various bolts, plugs and seals. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar cat 336 f ln excavator (prefix rbc) service repair manual (rbc000...fjsjekkdmnem
The document provides instructions for disassembling a 336F LN excavator travel motor. It lists 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Tools required include a transmission repair stand, lifting eye assembly, driver group, and various bolts, pins and seals. The disassembly process is detailed with illustrations to ensure correct reassembly.
Caterpillar cat 336 f l excavator (prefix rbc) service repair manual (rbc0000...fhhjsjekmdme
The document provides instructions for disassembling a 336F LN excavator travel motor. It lists 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Tools required include a transmission repair stand, lifting eye assembly, driver group, and other specialized tools. Safety precautions are provided to release spring forces safely.
Caterpillar cat 336 f ln excavator (prefix rbc) service repair manual (rbc000...fhhjsjekmdme
The document provides instructions for disassembling a 336F LN excavator travel motor. It lists 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Tools required include a transmission repair stand, lifting eye assembly, driver group, and various bolts, pins and seals. The disassembly process is detailed with illustrations to ensure correct reassembly.
Caterpillar cat 336 f ln excavator (prefix rbc) service repair manual (rbc000...didkkmmdm
This document provides instructions for disassembling the travel motor on a 336F LN excavator. It describes 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, various plugs, seals, springs, relief valves, and more. Detailed illustrations accompany each step to show how to properly remove and disassemble the parts. Safety notices are included throughout to warn of potential hazards like released spring forces during disassembly.
Caterpillar cat 336 f ln excavator (prefix nbs) service repair manual (nbs000...fjsjekdmmeme
This document provides disassembly instructions for a 336F excavator travel motor. It lists 27 steps to fully disassemble the travel motor, including removing the head, springs, pistons, plates, seals and other components. Special tools are required for tasks like removing springs and pistons. Safety precautions are noted, such as wearing protective equipment when releasing spring forces. Component markings and positions must be recorded to ensure proper reassembly.
Caterpillar cat 336 f ln excavator (prefix kft) service repair manual (kft000...fjsjekdmmeme
This document provides disassembly instructions for a 336F excavator travel motor. It lists 27 steps to fully disassemble the travel motor, including removing the head, brake components, rotating assembly, piston assemblies, seals, and other internal parts. Precautions are provided to safely release spring forces and contain fluids. Required tools include various bolts, pins, pullers and stands to dismantle the motor in a vertical position. Detailed illustrations accompany each step.
Caterpillar cat 336 f l excavator (prefix lcl) service repair manual (lcl0000...fjsqazkekdmme
This document provides instructions to disassemble a 336F and 336F L excavator travel motor. It lists the required tools and describes 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal components. Marks should be made on components to ensure proper reassembly. Care is needed when removing parts to avoid damage and release of stored spring forces.
Caterpillar cat 336 f ln excavator (prefix nbs) service repair manual (nbs000...fhhjsjekmdme
The document provides instructions for disassembling a 336F excavator travel motor. It lists 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Detailed illustrations accompany each step to show how to remove parts and what tools are required. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar cat 336 f ln excavator (prefix nbs) service repair manual (nbs000...didkkmmdm
This document provides instructions for disassembling the travel motor on a 336F L & 336F LN Excavator. It outlines 27 steps to remove parts like the motor head assembly, springs, seals, relief valves, plugs and spools. Various tools are required including a driver group, retaining ring pliers, bearing puller group and lifting eye assembly to safely remove parts and release spring forces during disassembly.
Caterpillar cat 336 f l excavator (prefix nbs) service repair manual (nbs0000...didkkmmdm
The document provides instructions for disassembling a 336F excavator travel motor. It lists 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Detailed illustrations accompany each step to show how to remove parts and what tools are required. Safety notices are included to warn of potential spring forces and contain fluids properly during disassembly.
Caterpillar cat 330 l excavator (prefix 8fk) service repair manual (8fk00001 ...fjsjekdmmeme
This document provides instructions for removing and installing a cylinder head on a 330L excavator with a 3306 engine. The key steps are:
1. Remove components attached to the cylinder head like the exhaust manifold, fuel lines, and rocker shaft.
2. Remove the cylinder head bolts and lifting the heavy cylinder head off the engine.
3. Clean the mating surfaces and install a new gasket before reinstalling the cylinder head and torquing the bolts in the specified sequence.
4. Reinstall the removed components like the rocker shaft after installing the new cylinder head.
Caterpillar cat 330 l excavator (prefix 5ym) service repair manual (5ym00001 ...fjsjekdmmeme
The document provides instructions for installing a cylinder head on a Caterpillar 330 excavator engine. It describes:
1. Removing the fuel injection lines, exhaust manifold, and rocker shaft/pushrods before removing the cylinder head.
2. Removing the water pump elbow, inlet manifold, and air inlet pipe to access the cylinder head bolts.
3. Using a lifting device to safely remove the 95 kg cylinder head from the engine block.
4. Cleaning all parts to prevent contamination before reinstallation.
Caterpillar cat 330 c fm excavator (prefix b4n) service repair manual (b4n000...fjsjekdmmeme
This document provides instructions for servicing components of a Caterpillar 330C FM Excavator engine, including:
- Installing the cylinder head, which involves positioning a new gasket, attaching lifting tools to the head, applying anti-seize compound, and tightening bolts in a specific sequence.
- Removing and installing the camshaft, which requires removing other parts first like the rocker arm and front cover, then using hooks to position lifters and removing/installing the camshaft.
- Removing and installing the camshaft gear by first removing the camshaft, pressing it off the gear, heating the gear, and pressing it back onto the camshaft
Caterpillar cat 330 c fm excavator (prefix b2l) service repair manual (b2l000...fjsjekdmmeme
This document provides instructions for removing and installing the cylinder head and camshaft on a Caterpillar 330C FM excavator equipped with a C-9 engine. The removal procedure involves draining coolant, removing various components attached to the cylinder head like the alternator and valve cover, then using lifting tools to remove the cylinder head and gasket. The installation procedure outlines reinstalling the gasket and cylinder head, reattaching all components and refilling the cooling system. Similarly, the camshaft removal involves setting piston timing, removing gears and thrust plate, while installation requires lubricating and inserting the camshaft ensuring proper timing of gears.
Caterpillar cat 330 b ln excavator (prefix 5lr) service repair manual (5lr000...fjsjekdmmeme
This document provides instructions for removing and installing various engine components on Caterpillar 330B L and 330B LN excavator models, including the cylinder head, spacer plate, water directors, lifter group, and camshaft. The procedures describe cleaning parts, applying lubricants, and tightening bolts to specified torques. Detailed illustrations show the component locations and assembly sequences.
Caterpillar cat 330 b ln excavator (prefix 3yr) service repair manual (3yr000...fjsjekdmmeme
The document provides instructions for servicing components of a 330B L excavator including:
1. Installing a compression brake on the engine and connecting wires.
2. Removing and assembling the rocker shaft and pushrods, including disassembling the rocker shaft into individual components.
3. Removing the cylinder head from the engine which involves removing manifold, pushrods, and bolts holding the head in place. Proper lifting equipment is needed due to the head's weight.
Caterpillar cat 330 b l excavator (prefix 6dr) service repair manual (6dr0000...fjsjekdmmeme
The documents provide instructions for servicing the valve train components of a Caterpillar 3306 engine. The documents describe how to remove and install the rocker shaft and pushrods, disassemble and assemble the rocker shaft, and remove and install the cylinder head. The procedures note to keep parts clean, identify pushrod locations, torque fasteners correctly, and lift the cylinder head carefully due to its weight.
Caterpillar cat 330 b l excavator (prefix 5lr) service repair manual (5lr0000...fjsjekdmmeme
This document provides instructions for removing and installing various engine components on Caterpillar 330B L and 330B LN excavator models, including the cylinder head, spacer plate, water directors, lifter group, and camshaft. The procedures describe cleaning parts, applying lubricants, and tightening bolts to specified torques. Detailed illustrations show the components and steps in the process.
Caterpillar cat 330 b l excavator (prefix 3yr) service repair manual (3yr0000...fjsjekdmmeme
The document provides instructions for servicing components of a 330B L excavator including:
1. Installing a compression brake on the engine and connecting wires.
2. Removing and assembling the rocker shaft and pushrods, including disassembling the rocker shaft into individual components.
3. Removing the cylinder head from the engine which involves removing manifold, pushrods, bolts, and using a lifting device due to the head's weight of 95 kg.
Caterpillar cat 318 b n excavator (prefix 7kz) service repair manual (7kz0000...fjsjekdmmeme
The document provides instructions for removing and installing various engine components on a Caterpillar 3046 engine, including:
- Removing the flywheel by drilling holes in it and using a lifting strap and tool.
- Installing a new crankshaft rear seal using sealing tools and bolts.
- Removing the flywheel housing by loosening bolts while supported by a lifting tool.
- Removing the vibration damper and pulley by loosening bolts and nuts using sockets and pullers.
Caterpillar cat 318 b ln excavator (prefix 7kz) service repair manual (7kz000...fjsjekdmmeme
The document provides instructions for removing and installing various engine components on a Caterpillar 3046 engine, including:
- Removing the flywheel by drilling holes in it and using a lifting strap and tool.
- Installing a new crankshaft rear seal using sealing tools and bolts.
- Removing the flywheel housing by loosening bolts while supported by a lifting tool.
- Removing the vibration damper and pulley by loosening bolts and nuts using sockets and pullers.
Caterpillar cat 318 b l excavator (prefix 7kz) service repair manual (7kz0000...fjsjekdmmeme
The document provides instructions for removing and installing various engine components on a Caterpillar 3046 engine, including:
- Removing the flywheel by drilling holes in it and using a lifting strap and tool.
- Installing a new crankshaft rear seal using sealing tools and installing the flywheel back on with bolts.
- Removing the flywheel housing by removing bolts with a lifting strap and tool, and installing a new gasket and housing.
- Removing the vibration damper and pulley by removing bolts and nuts with sockets and a puller tool if needed.
Caterpillar cat 315 d l excavator (prefix kbd) service repair manual (kbd0000...fjsjekdmmeme
This document provides instructions for disassembling and assembling the final drive of a 315D L excavator. The disassembly process involves using various tools to remove over 30 individual components from the final drive housing. The assembly process reverses the disassembly steps and provides details on installing bearings, seals, gears, and other components back into the housing using presses, lifting devices, and installation tools. Precise measurements are taken to determine the correct shim thickness for preloading the bearings. Cleanliness and lubrication of parts is emphasized throughout.
More Related Content
Similar to Caterpillar cat 336 f ln excavator (prefix rbc) service repair manual (rbc00001 and up)
Caterpillar cat 336 f l excavator (prefix rbc) service repair manual (rbc0000...fhhjsjekmdme
The document provides instructions for disassembling a 336F LN excavator travel motor. It lists 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Tools required include a transmission repair stand, lifting eye assembly, driver group, and other specialized tools. Safety precautions are provided to release spring forces safely.
Caterpillar cat 336 f ln excavator (prefix rbc) service repair manual (rbc000...fhhjsjekmdme
The document provides instructions for disassembling a 336F LN excavator travel motor. It lists 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Tools required include a transmission repair stand, lifting eye assembly, driver group, and various bolts, pins and seals. The disassembly process is detailed with illustrations to ensure correct reassembly.
Caterpillar cat 336 f ln excavator (prefix rbc) service repair manual (rbc000...didkkmmdm
This document provides instructions for disassembling the travel motor on a 336F LN excavator. It describes 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, various plugs, seals, springs, relief valves, and more. Detailed illustrations accompany each step to show how to properly remove and disassemble the parts. Safety notices are included throughout to warn of potential hazards like released spring forces during disassembly.
Caterpillar cat 336 f ln excavator (prefix nbs) service repair manual (nbs000...fjsjekdmmeme
This document provides disassembly instructions for a 336F excavator travel motor. It lists 27 steps to fully disassemble the travel motor, including removing the head, springs, pistons, plates, seals and other components. Special tools are required for tasks like removing springs and pistons. Safety precautions are noted, such as wearing protective equipment when releasing spring forces. Component markings and positions must be recorded to ensure proper reassembly.
Caterpillar cat 336 f ln excavator (prefix kft) service repair manual (kft000...fjsjekdmmeme
This document provides disassembly instructions for a 336F excavator travel motor. It lists 27 steps to fully disassemble the travel motor, including removing the head, brake components, rotating assembly, piston assemblies, seals, and other internal parts. Precautions are provided to safely release spring forces and contain fluids. Required tools include various bolts, pins, pullers and stands to dismantle the motor in a vertical position. Detailed illustrations accompany each step.
Caterpillar cat 336 f l excavator (prefix lcl) service repair manual (lcl0000...fjsqazkekdmme
This document provides instructions to disassemble a 336F and 336F L excavator travel motor. It lists the required tools and describes 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal components. Marks should be made on components to ensure proper reassembly. Care is needed when removing parts to avoid damage and release of stored spring forces.
Caterpillar cat 336 f ln excavator (prefix nbs) service repair manual (nbs000...fhhjsjekmdme
The document provides instructions for disassembling a 336F excavator travel motor. It lists 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Detailed illustrations accompany each step to show how to remove parts and what tools are required. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar cat 336 f ln excavator (prefix nbs) service repair manual (nbs000...didkkmmdm
This document provides instructions for disassembling the travel motor on a 336F L & 336F LN Excavator. It outlines 27 steps to remove parts like the motor head assembly, springs, seals, relief valves, plugs and spools. Various tools are required including a driver group, retaining ring pliers, bearing puller group and lifting eye assembly to safely remove parts and release spring forces during disassembly.
Caterpillar cat 336 f l excavator (prefix nbs) service repair manual (nbs0000...didkkmmdm
The document provides instructions for disassembling a 336F excavator travel motor. It lists 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Detailed illustrations accompany each step to show how to remove parts and what tools are required. Safety notices are included to warn of potential spring forces and contain fluids properly during disassembly.
Similar to Caterpillar cat 336 f ln excavator (prefix rbc) service repair manual (rbc00001 and up) (9)
Caterpillar cat 330 l excavator (prefix 8fk) service repair manual (8fk00001 ...fjsjekdmmeme
This document provides instructions for removing and installing a cylinder head on a 330L excavator with a 3306 engine. The key steps are:
1. Remove components attached to the cylinder head like the exhaust manifold, fuel lines, and rocker shaft.
2. Remove the cylinder head bolts and lifting the heavy cylinder head off the engine.
3. Clean the mating surfaces and install a new gasket before reinstalling the cylinder head and torquing the bolts in the specified sequence.
4. Reinstall the removed components like the rocker shaft after installing the new cylinder head.
Caterpillar cat 330 l excavator (prefix 5ym) service repair manual (5ym00001 ...fjsjekdmmeme
The document provides instructions for installing a cylinder head on a Caterpillar 330 excavator engine. It describes:
1. Removing the fuel injection lines, exhaust manifold, and rocker shaft/pushrods before removing the cylinder head.
2. Removing the water pump elbow, inlet manifold, and air inlet pipe to access the cylinder head bolts.
3. Using a lifting device to safely remove the 95 kg cylinder head from the engine block.
4. Cleaning all parts to prevent contamination before reinstallation.
Caterpillar cat 330 c fm excavator (prefix b4n) service repair manual (b4n000...fjsjekdmmeme
This document provides instructions for servicing components of a Caterpillar 330C FM Excavator engine, including:
- Installing the cylinder head, which involves positioning a new gasket, attaching lifting tools to the head, applying anti-seize compound, and tightening bolts in a specific sequence.
- Removing and installing the camshaft, which requires removing other parts first like the rocker arm and front cover, then using hooks to position lifters and removing/installing the camshaft.
- Removing and installing the camshaft gear by first removing the camshaft, pressing it off the gear, heating the gear, and pressing it back onto the camshaft
Caterpillar cat 330 c fm excavator (prefix b2l) service repair manual (b2l000...fjsjekdmmeme
This document provides instructions for removing and installing the cylinder head and camshaft on a Caterpillar 330C FM excavator equipped with a C-9 engine. The removal procedure involves draining coolant, removing various components attached to the cylinder head like the alternator and valve cover, then using lifting tools to remove the cylinder head and gasket. The installation procedure outlines reinstalling the gasket and cylinder head, reattaching all components and refilling the cooling system. Similarly, the camshaft removal involves setting piston timing, removing gears and thrust plate, while installation requires lubricating and inserting the camshaft ensuring proper timing of gears.
Caterpillar cat 330 b ln excavator (prefix 5lr) service repair manual (5lr000...fjsjekdmmeme
This document provides instructions for removing and installing various engine components on Caterpillar 330B L and 330B LN excavator models, including the cylinder head, spacer plate, water directors, lifter group, and camshaft. The procedures describe cleaning parts, applying lubricants, and tightening bolts to specified torques. Detailed illustrations show the component locations and assembly sequences.
Caterpillar cat 330 b ln excavator (prefix 3yr) service repair manual (3yr000...fjsjekdmmeme
The document provides instructions for servicing components of a 330B L excavator including:
1. Installing a compression brake on the engine and connecting wires.
2. Removing and assembling the rocker shaft and pushrods, including disassembling the rocker shaft into individual components.
3. Removing the cylinder head from the engine which involves removing manifold, pushrods, and bolts holding the head in place. Proper lifting equipment is needed due to the head's weight.
Caterpillar cat 330 b l excavator (prefix 6dr) service repair manual (6dr0000...fjsjekdmmeme
The documents provide instructions for servicing the valve train components of a Caterpillar 3306 engine. The documents describe how to remove and install the rocker shaft and pushrods, disassemble and assemble the rocker shaft, and remove and install the cylinder head. The procedures note to keep parts clean, identify pushrod locations, torque fasteners correctly, and lift the cylinder head carefully due to its weight.
Caterpillar cat 330 b l excavator (prefix 5lr) service repair manual (5lr0000...fjsjekdmmeme
This document provides instructions for removing and installing various engine components on Caterpillar 330B L and 330B LN excavator models, including the cylinder head, spacer plate, water directors, lifter group, and camshaft. The procedures describe cleaning parts, applying lubricants, and tightening bolts to specified torques. Detailed illustrations show the components and steps in the process.
Caterpillar cat 330 b l excavator (prefix 3yr) service repair manual (3yr0000...fjsjekdmmeme
The document provides instructions for servicing components of a 330B L excavator including:
1. Installing a compression brake on the engine and connecting wires.
2. Removing and assembling the rocker shaft and pushrods, including disassembling the rocker shaft into individual components.
3. Removing the cylinder head from the engine which involves removing manifold, pushrods, bolts, and using a lifting device due to the head's weight of 95 kg.
Caterpillar cat 318 b n excavator (prefix 7kz) service repair manual (7kz0000...fjsjekdmmeme
The document provides instructions for removing and installing various engine components on a Caterpillar 3046 engine, including:
- Removing the flywheel by drilling holes in it and using a lifting strap and tool.
- Installing a new crankshaft rear seal using sealing tools and bolts.
- Removing the flywheel housing by loosening bolts while supported by a lifting tool.
- Removing the vibration damper and pulley by loosening bolts and nuts using sockets and pullers.
Caterpillar cat 318 b ln excavator (prefix 7kz) service repair manual (7kz000...fjsjekdmmeme
The document provides instructions for removing and installing various engine components on a Caterpillar 3046 engine, including:
- Removing the flywheel by drilling holes in it and using a lifting strap and tool.
- Installing a new crankshaft rear seal using sealing tools and bolts.
- Removing the flywheel housing by loosening bolts while supported by a lifting tool.
- Removing the vibration damper and pulley by loosening bolts and nuts using sockets and pullers.
Caterpillar cat 318 b l excavator (prefix 7kz) service repair manual (7kz0000...fjsjekdmmeme
The document provides instructions for removing and installing various engine components on a Caterpillar 3046 engine, including:
- Removing the flywheel by drilling holes in it and using a lifting strap and tool.
- Installing a new crankshaft rear seal using sealing tools and installing the flywheel back on with bolts.
- Removing the flywheel housing by removing bolts with a lifting strap and tool, and installing a new gasket and housing.
- Removing the vibration damper and pulley by removing bolts and nuts with sockets and a puller tool if needed.
Caterpillar cat 315 d l excavator (prefix kbd) service repair manual (kbd0000...fjsjekdmmeme
This document provides instructions for disassembling and assembling the final drive of a 315D L excavator. The disassembly process involves using various tools to remove over 30 individual components from the final drive housing. The assembly process reverses the disassembly steps and provides details on installing bearings, seals, gears, and other components back into the housing using presses, lifting devices, and installation tools. Precise measurements are taken to determine the correct shim thickness for preloading the bearings. Cleanliness and lubrication of parts is emphasized throughout.
Caterpillar cat 315 c excavator (prefix cfl) service repair manual (cfl00001 ...fjsjekdmmeme
1) The document provides step-by-step instructions for disassembling and assembling the final drive of a 315C excavator.
2) It details 21 steps for disassembly, including removing gears, shafts, seals, and housing components.
3) The 19 steps for assembly describe installing these same parts in reverse order, with notes on cleaning, lubricating, and using various tools to set proper torque and clearance.
Caterpillar cat 311 c u excavator (prefix pad) service repair manual (pad0000...fjsjekdmmeme
The document provides disassembly instructions for the final drive, travel motor, travel brake valve, and traction control valve of an excavator model 311C. It lists the required tools and parts and provides step-by-step instructions and illustrations for removing components like gears, plates, pistons, springs, and seals from each assembly. Safety warnings are included to take precautions for released spring forces during disassembly.
Caterpillar cat 311 c u excavator (prefix cke) service repair manual (cke0000...fjsjekdmmeme
This service repair manual provides instructions for removing and installing inlet and exhaust valve seals on models 311C and 311C U excavators. The document describes the required tools and provides a step-by-step procedure for removing the old seals and installing new seals. It also includes instructions for removing and installing the engine oil filter base and engine oil cooler.
Caterpillar cat 311 c excavator (prefix pad) service repair manual (pad00001 ...fjsjekdmmeme
The document provides disassembly instructions for the final drive, travel motor, travel brake valve, and traction control valve of an excavator model 311C. It lists the required tools and parts and provides step-by-step instructions and illustrations for removing components like gears, plates, pistons, springs, and seals from each assembly. Safety warnings are included to take precautions for released spring forces during disassembly.
Caterpillar cat 311 c excavator (prefix cke) service repair manual (cke00001 ...fjsjekdmmeme
This service repair manual provides instructions for removing and installing inlet and exhaust valve seals on models 311C and 311C U excavators. The document describes the required tools and provides a step-by-step procedure for removing the old seals and installing new seals. It also includes instructions for removing and installing the engine oil filter base and engine oil cooler.
Caterpillar cat 311 b track type excavator (prefix 2ls) service repair manual...fjsjekdmmeme
This document provides instructions for servicing components of a 311B excavator engine, including:
1) Instructions for assembling the rocker shaft, including the components and installation steps.
2) Instructions for installing the rocker shaft and pushrods, including torque specifications.
3) Instructions for removing the cylinder head, including removal steps and safety notices.
Caterpillar cat 16 h na motor grader (prefix 6zj) service repair manual (6zj0...fjsjekdmmeme
This document provides instructions for removing and installing various engine components on a 16H NA Motor Grader with a 3406C engine, including:
1. Timing gears and plate
2. Camshaft
3. Camshaft bearings
4. Connecting rod bearings
5. Crankshaft main bearings
The instructions describe each removal and installation step in detail and include notes about proper procedure, tool usage, torque specifications and checks to perform.
Automotive Engine Valve Manufacturing Plant Project Report.pptxSmith Anderson
The report provides a complete roadmap for setting up an Automotive Engine Valve. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F LN EXCAVATOR RBC
Configuration: 336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336F Excavator Machine Systems
Media Number -UENR0192-04 Publication Date -01/02/2018 Date Updated -21/02/2018
i03863290
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 by 250 mm (10 inch) Threaded Rod 1
B
8T-0651 Bolt 1
8T-4167 Hard Washer 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
Start By:
a. Remove the travel motor.
1. Fasten the travel motor in Tooling (A) in a vertical position. The weight of the travel motor
is approximately 60 kg (132 lb).
1/10336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. 2. Put an alignment mark across the head and the body of the travel motor for assembly
purposes. The head must be reinstalled in the head's original position on the body of the
travel motor.
Illustration 1 g00887295
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Note: During the removal of head (2) from the travel motor, be careful not to damage the
mating surfaces of the components.
3. Remove bolts (1).
4. Remove head (2) from the body of the travel motor.
2/10336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 2 g00887302
5. Remove O-ring seal (3), port plate (4), and bearing (5).
Illustration 3 g00887311
6. Remove O-ring seals (6). Remove springs (7).
Illustration 4 g00887331
Illustration 5 g00890074
This is an example of the use of Tooling (B).
3/10336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 7. Place a shop towel over brake piston (8). Retain brake piston (8) with Tooling (B). Apply
approximately 525 kPa (75 psi) of shop air pressure to brake release Port (Y). Make sure
that the shop air pressure is free of water. Brake piston (8) will move up the piston guide,
and out of the piston guide. Remove brake piston (8) from the body of the travel motor.
Illustration 6 g00887336
8. Remove seal (9) and backup ring (10) from the brake piston.
9. Remove seal (11) and backup ring (12) from the brake piston.
Illustration 7 g00887355
10. Remove plates (13) and friction discs (14).
4/10336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 8 g02107957
Illustration 9 g00887405
Illustration 10 g00887424
11. Install Tooling (C) into shaft (15). Use a prybar to remove the rotating assembly (16) from
the housing.
12. Remove Tooling (C) from shaft (15).
13. Remove shaft (15) from rotating assembly (16).
Illustration 11 g00887426
5/10336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 14. Use Tooling (D) in order to remove retaining ring (17) from shaft (15).
Illustration 12 g00887445
15. Use a suitable press in order to remove bearing race (18) from shaft (15).
Illustration 13 g00887463
16. Rotate shaft (15). Use a suitable press and tooling (E) in order to remove bearing race (19)
from shaft (15).
Illustration 14 g00887501
17. Remove cam plate (20) from barrel assembly (21).
6/10336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 15 g00887520
18. Remove piston assemblies and retainer plate (22) from barrel assembly (21).
Note: Place marks on the pistons and the barrel assembly. The pistons must be returned to
the original position.
Illustration 16 g00887558
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
19. Remove ball (23) and springs (24).
7/10336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 17 g02107975
20. Remove bearing (25).
21. Remove keys (26) and locating pins (not shown) from the body of the travel motor.
Illustration 18 g00887589
22. Rotate the housing. Use Tooling (F) in order to remove retaining ring (27).
23. Remove lip seal (28).
Illustration 19 g00887619
24. Remove bolts (29) and cover (30).
8/10336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 20 g00887729
25. Remove seal (31) and backup ring (32).
Illustration 21 g00887754
26. Remove piston actuator (33) and seal (34).
Illustration 22 g00887762
27. Remove O-ring seal (35) from the housing of the travel motor.
9/10336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F LN EXCAVATOR RBC
Configuration: 336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336F Excavator Machine Systems
Media Number -UENR0192-04 Publication Date -01/02/2018 Date Updated -21/02/2018
i07195340
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 421-5662 Lifting Eye Assembly 1
C
6V-5215 M8 X 1.25 X 16 MM Bolt 2
9M-1974 M8 Hard Washer 2
D 1P-0510 Driver Gp 1
Start By:
a. Remove travel motor.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/14336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat�
products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06249277
1. Fasten travel motor (1) in a vertical position on Tooling (A). The weight of travel motor (1)
is approximately 82 kg (180 lb).
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
2. Remove bolts (2) and cap (3).
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
2/14336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 2 g06249309
Illustration 3 g06249323
Illustration 4 g06249325
3. Remove bolts (4) and cap (5).
4. Remove spring (6), spring (9), spool assembly (8), and spring seats (7).
3/14336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 5 g06249329
5. Remove plug (11), relief valve (10), and the O-ring seals.
Illustration 6 g06249334
6. Remove plug (13), relief valve (12), and the O-ring seals.
Illustration 7 g06249337
7. Remove plug (14), and the O-ring seal.
4/14336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 8 g06249341
Illustration 9 g06249344
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
8. Remove plug (15), spool assembly (16), spring (17), and the O-ring seals.
5/14336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 10 g06249348
9. Remove plugs (18) and the O-ring seals.
Illustration 11 g06249351
10. Remove bolts (19).
Illustration 12 g06249354
11. Attach Tooling (B) and a suitable lifting device to motor head assembly (20). The weight of
motor head assembly (20) is approximately 27 kg (60 lb). Remove motor head assembly
(20).
6/14336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 13 g06250338
12. Remove the ball bearing that is located on the bottom side of motor head assembly (20).
Illustration 14 g06249364
Port plate (25) may still be adhered to the bottom of motor head assembly (20).
13. Remove O-ring seals (21), O-ring seal (22), springs (23), springs (24), and port plate (25).
Note: Note the location of springs (23). They must be installed in the same location during
the assembly procedure.
Illustration 15 g06249511
7/14336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 14. Insert Tooling (C) into piston assembly (26). Use a suitable prying device and Tooling (C)
to remove piston assembly (26).
Illustration 16 g06250418
15. Remove O-ring seal (27) and O-ring seal (28).
Illustration 17 g06249522
16. Use suitable prying devices to remove guide assembly (29).
Illustration 18 g06249535
17. Remove O-ring seal (30).
8/14336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 19 g06249539
Illustration 20 g06249544
18. Remove separator plates (31) and friction plates (32). Note the alternating order of separator
plates (31) and friction plates (32) for assembly purposes.
Illustration 21 g06249564
19. Remove barrel assembly (33).
Note: Do not allow the components of barrel assembly (33) to come apart while you
remove barrel assembly (33). The components of barrel assembly (33) must be reinstalled
into the original positions.
9/14336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 22 g06249598
Note: Mark the component locations for assembly purposes before you disassemble the
barrel assembly.
20. Remove piston assemblies (34) and retainer (35).
Illustration 23 g06249609
21. Remove hold down ball (36).
Illustration 24 g06249621
10/14336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 ...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. 22. Remove dowel pins (37).
Illustration 25 g06249657
23. Put location marks on swashplate (38) for assembly purposes. Remove swashplate (38).
Illustration 26 g06249682
24. Remove pistons (39) and the balls.
Illustration 27 g06249751
25. Remove springs (40).
11/14336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 ...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 28 g06249755
Illustration 29 g06249758
26. Use a suitable press and Tooling (D) to remove snap ring (41), spacers (42), and spring (43).
12/14336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 ...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 30 g06249760
27. Use a soft faced hammer to remove shaft assembly (44). Remove shaft assembly (44) in the
direction that is indicated by the arrow.
28. Remove O-ring seal (45).
Illustration 31 g06249762
29. Remove lip seal (46).
Illustration 32 g06249763
30. Use a suitable press to push shaft (47) out of bearing (48).
13/14336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 ...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F LN EXCAVATOR RBC
Configuration: 336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336F Excavator Machine Systems
Media Number -UENR0192-04 Publication Date -01/02/2018 Date Updated -21/02/2018
i07175112
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/10336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
3. Install backup ring (32) and seal (31).
2/10336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 � 7 N�m (21 � 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) to install lip seal
(28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) to install retaining ring (27).
Illustration 6 g02107975
7. Rotate the housing.
3/10336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
28. 8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25).
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
4/10336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
30. 14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15).
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
17. Place the pump housing into Tooling (A).
6/10336F L & 336F LN Excavators RBC00001-UP (MACHINE) POWERED BY C9.3 En...
2020/6/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...