Application of CFD and numerical optimisation methods in solving environmental problems in industry
•
1 like•576 views
European Forum "Sharing initiatives for a green and connected city" - 27 May 2008 - Committee of the Regions, Brussels
Report
Share
Report
Share
![[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],Laszlo Kalmar University of Miskolc Application of CFD and numerical optimisation methods in solving environmental problems in industry](https://image.slidesharecdn.com/kalmarv1-1213344065408273-9/85/Application-of-CFD-and-numerical-optimisation-methods-in-solving-environmental-problems-in-industry-1-320.jpg)
Recommended
Sound in engineering
This document discusses various applications of sound in engineering. It describes how sound is used for noise control, ultrasound, and synthesizers. In building design, sound is an important consideration depending on the intended use of the space. Applications in bridge engineering include non-destructive testing techniques like acoustic emission testing during proof loading to detect cracks before they are visible. The document also discusses using specialized asphalt mixes to reduce traffic noise pollution and extending the lifespan of bridges through improved inspection, calculation, and rehabilitation methods.
Bim and energy performance of buildings
Ervaringen van Ingenium op vlak van "BIM and energy performance of buildings". Voorgesteld op het eerste Europees congres over BIM
XVII CONVEGNO EUROPEO T. Funder-Kristensen - REFRIGERATION PLANTS AS BENEFICI...
XVII CONVEGNO EUROPEO T. Funder-Kristensen - REFRIGERATION PLANTS AS BENEFICI...Centro Studi Galileo
Thermal networks that connect supermarket refrigeration systems to district heating grids can significantly expand the energy scope of supermarkets. By integrating photovoltaic electricity generation and utilizing waste heat from refrigeration, supermarkets can export flexibility in electricity consumption and thermal energy conversion to storage and distribution networks. Unused compressor capacity in supermarket refrigeration systems, which is typically around 70%, represents an opportunity to absorb and distribute limitless thermal energy to external district heating networks.XVII CONVEGNO EUROPEO M. Buoni - THE USE OF ALTERNATIVE REFRIGERANTS, TRAININ...
XVII CONVEGNO EUROPEO M. Buoni - THE USE OF ALTERNATIVE REFRIGERANTS, TRAININ...Centro Studi Galileo
1) Training and certification programs for technicians need to be updated to include alternative refrigerants like hydrocarbons, carbon dioxide, and ammonia as countries shift away from high global warming potential refrigerants.
2) While there are over 40 training centers in the EU that offer training on alternative refrigerants, training availability and facilities are uneven across Europe.
3) AREA has developed guidelines on minimum training requirements for contractors and equipment handling low global warming potential refrigerants to help with the transition.XVII CONVEGNO EUROPEO D. Coulomb - INTRODUCTION
The document summarizes the topics that will be covered during presentations at the Latest Technologies in Refrigeration and Air Conditioning conference in Milan on June 9-10, 2017. The three topics are: 1) how to apply F-gas regulations and ongoing actions to reduce gases, 2) challenges and solutions for cold chains internationally from political and technical perspectives, and 3) opportunities for renewable energy in cooling due to regulations and new technologies in refrigeration and air conditioning.
Tp Case Study L
The text discusses a cleaner production assessment conducted at a textile company called Vernitas. It produces polyacryl nitrile yarns with an annual capacity of 6,000 tons for export to the EU. Several energy efficiency and waste reduction projects were identified. These include installing variable speed drives on fans, optimizing humidification systems, recovering heat from steam and air compressors. The assessment also looked at minimizing chemical usage, treating wastewater, and reusing cooling water.
XVII CONVEGNO EUROPEO S. Filippi - NEW INTELLIGENT DEFROSTING APPARATUS
1) The document describes NIDEA, a new intelligent defrost control device that optimizes defrost cycles for refrigeration systems.
2) Traditional defrost controls operate on fixed time intervals, but NIDEA uses sensors and algorithms to determine the optimal timing for defrost based on operating conditions.
3) A field test found that NIDEA performed defrosts less frequently than traditional controls, resulting in 24% lower total energy consumption and costs savings of over 20% per month.
XVII CONVEGNO EUROPEO D. Agostini - R744 REFRIGERATING SYSTEMS MULTI EJECTORS...
XVII CONVEGNO EUROPEO D. Agostini - R744 REFRIGERATING SYSTEMS MULTI EJECTORS...Centro Studi Galileo
- The document discusses R744 refrigerating systems with multi ejectors. It describes a company called Frigo Consulting that specializes in CO2 refrigeration and has implemented multi-ejector systems for several supermarket refrigeration projects.
- The multi-ejector systems have achieved efficiency increases of 15-25% compared to traditional booster systems with parallel compression through the use of liquid and vapor ejectors as well as heat exchanger improvements. Case studies on implemented systems in Switzerland and Romania show energy savings of 23-30%.Recommended
Sound in engineering
This document discusses various applications of sound in engineering. It describes how sound is used for noise control, ultrasound, and synthesizers. In building design, sound is an important consideration depending on the intended use of the space. Applications in bridge engineering include non-destructive testing techniques like acoustic emission testing during proof loading to detect cracks before they are visible. The document also discusses using specialized asphalt mixes to reduce traffic noise pollution and extending the lifespan of bridges through improved inspection, calculation, and rehabilitation methods.
Bim and energy performance of buildings
Ervaringen van Ingenium op vlak van "BIM and energy performance of buildings". Voorgesteld op het eerste Europees congres over BIM
XVII CONVEGNO EUROPEO T. Funder-Kristensen - REFRIGERATION PLANTS AS BENEFICI...
XVII CONVEGNO EUROPEO T. Funder-Kristensen - REFRIGERATION PLANTS AS BENEFICI...Centro Studi Galileo
Thermal networks that connect supermarket refrigeration systems to district heating grids can significantly expand the energy scope of supermarkets. By integrating photovoltaic electricity generation and utilizing waste heat from refrigeration, supermarkets can export flexibility in electricity consumption and thermal energy conversion to storage and distribution networks. Unused compressor capacity in supermarket refrigeration systems, which is typically around 70%, represents an opportunity to absorb and distribute limitless thermal energy to external district heating networks.XVII CONVEGNO EUROPEO M. Buoni - THE USE OF ALTERNATIVE REFRIGERANTS, TRAININ...
XVII CONVEGNO EUROPEO M. Buoni - THE USE OF ALTERNATIVE REFRIGERANTS, TRAININ...Centro Studi Galileo
1) Training and certification programs for technicians need to be updated to include alternative refrigerants like hydrocarbons, carbon dioxide, and ammonia as countries shift away from high global warming potential refrigerants.
2) While there are over 40 training centers in the EU that offer training on alternative refrigerants, training availability and facilities are uneven across Europe.
3) AREA has developed guidelines on minimum training requirements for contractors and equipment handling low global warming potential refrigerants to help with the transition.XVII CONVEGNO EUROPEO D. Coulomb - INTRODUCTION
The document summarizes the topics that will be covered during presentations at the Latest Technologies in Refrigeration and Air Conditioning conference in Milan on June 9-10, 2017. The three topics are: 1) how to apply F-gas regulations and ongoing actions to reduce gases, 2) challenges and solutions for cold chains internationally from political and technical perspectives, and 3) opportunities for renewable energy in cooling due to regulations and new technologies in refrigeration and air conditioning.
Tp Case Study L
The text discusses a cleaner production assessment conducted at a textile company called Vernitas. It produces polyacryl nitrile yarns with an annual capacity of 6,000 tons for export to the EU. Several energy efficiency and waste reduction projects were identified. These include installing variable speed drives on fans, optimizing humidification systems, recovering heat from steam and air compressors. The assessment also looked at minimizing chemical usage, treating wastewater, and reusing cooling water.
XVII CONVEGNO EUROPEO S. Filippi - NEW INTELLIGENT DEFROSTING APPARATUS
1) The document describes NIDEA, a new intelligent defrost control device that optimizes defrost cycles for refrigeration systems.
2) Traditional defrost controls operate on fixed time intervals, but NIDEA uses sensors and algorithms to determine the optimal timing for defrost based on operating conditions.
3) A field test found that NIDEA performed defrosts less frequently than traditional controls, resulting in 24% lower total energy consumption and costs savings of over 20% per month.
XVII CONVEGNO EUROPEO D. Agostini - R744 REFRIGERATING SYSTEMS MULTI EJECTORS...
XVII CONVEGNO EUROPEO D. Agostini - R744 REFRIGERATING SYSTEMS MULTI EJECTORS...Centro Studi Galileo
- The document discusses R744 refrigerating systems with multi ejectors. It describes a company called Frigo Consulting that specializes in CO2 refrigeration and has implemented multi-ejector systems for several supermarket refrigeration projects.
- The multi-ejector systems have achieved efficiency increases of 15-25% compared to traditional booster systems with parallel compression through the use of liquid and vapor ejectors as well as heat exchanger improvements. Case studies on implemented systems in Switzerland and Romania show energy savings of 23-30%.Gambit Summer 2009 Talk
A talk given by Fire Hose Games to the MIT GAMBIT video game lab about rapid, iterative video game prototyping. The presentation covers many tips and tricks for quickly making useful game prototypes
Cfd analysis of_centrifugal_pump
This document summarizes a CFD analysis of a centrifugal pump. The objectives were to analyze the pump at different flow conditions, plot characteristic curves, and analyze cavitation. The analysis used ANSYS Fluent and CFX to model the solid pump components with over 19 million mesh elements. Boundary conditions were applied to simulate flow rates from 22 to 34 kg/s. Results showed maximum efficiency of 89.24% occurring at the design flow rate, and lower efficiency under cavitation due to higher power needs to pump vapor. Pressure and velocity plots as well as performance curves matched published literature values.
Diplomado Desarrollo y Gestión de Contenidos Digitales UC
Este documento presenta el Diplomado en Desarrollo y Gestión de Contenidos Digitales de la Facultad de Comunicaciones UC. El diplomado se compone de cuatro cursos repartidos en dos semestres y está dirigido a profesionales relacionados con contenidos digitales. El cuerpo académico incluye expertos en medios digitales, periodismo, diseño y gestión de proyectos.
Personality & the Brain: A new perspective on the ISTP
Through the lens of the Striving Styles, each of the Myers-Briggs Type Indicator® (MBTI®) 16 Types comes alive. Discover which quadrant of the brain the ISTP prefers to use and the predominant, innate psychological need that drives the ISTP's behavior as well as how an ISTP can leverage their whole brain in order to develop and achieve their potential.
The SSPS shows that each of the four quadrants of the brain has their own role, or function, to play in our personality and our consciousness. Based on Jung's Theory of Psychological Type, we are hard-wired to prefer one function or quadrant over the others and we use each quadrant or function in either an inwardly or an outwardly way.
A web como recurso didáctico
Presentación da web como recurso didáctico pertencente ao módulo MF1443-3 do certificado de profesionalidade DOCENCIA DA FORMACIÓN PROFESIONAL PARA O EMPREGO
Title Fonts - Main Task
The document evaluates three different title fonts - Aparajita, Euphemia, and Adobe Myungjo Std M - for a horror film titled "The Onslaught". Aparajita was deemed too sophisticated and not creepy enough. Euphemia had consistent text weighting but letters like L and G were too formal or casual. Adobe Myungjo Std M was determined to be the best choice as it was stripped back yet creepy, with consistent text weighting and a tidy curved G that fit the desired sophisticated yet scary tone.
Conventions of opening scenes
The document discusses various conventions for opening scenes in films. It explains that the purpose of an opening is to catch the audience's attention and introduce them to the characters and genre. Some common types of openings are establishing shots, which set the location; flashbacks, which provide backstory; narration, which gives context; and action scenes, which aim to hook viewers. Other techniques include opening credits, title sequences, animation, photo compilations, and setting the mood with music.
Terra Como Sistema
O documento descreve o sistema Terra, composto por atmosfera, água, seres vivos e solo, que interagem entre si. A água é o componente mais abundante e essencial à vida, modelando a superfície terrestre. A atmosfera regula a temperatura e protege o planeta. O solo cobre 1/4 da superfície e forma-se a partir da alteração das rochas. Os seres vivos dependem direta ou indiretamente da energia solar, água e nutrientes para sobreviver.
Cape Coral FL Canal Cruise
Join us on one of our favorite short boating trips on Cape Coral saltwater canals to Longboards outdoor cabana bar at Cape Harbour.
perforacion diamantinA
El documento describe la geología y recursos mineros del Perú. Explica la historia geológica del país desde la deriva de los continentes hasta la formación actual, incluyendo la tectónica de placas. También describe las principales provincias y distritos mineros del Perú y su importancia a nivel mundial en la producción de metales como plata, cobre y zinc.
Towards Building a Universal Defect Prediction Model
To predict files with defects, a suitable prediction model must be built for a software project from either itself (withinproject) or other projects (cross-project). A universal defect prediction model that is built from the entire set of diverse projects would relieve the need for building models for an individual project. A universal model could also be interpreted as a basic relationship between software metrics and defects. However, the variations in the distribution of predictors pose a formidable obstacle to build a universal model. Such variations exist among projects with different context factors (e.g., size and programming language). To overcome this challenge, we propose context-aware rank transformations for predictors. We cluster projects based on the similarity of the distribution of 26 predictors, and derive the rank transformations using quantiles of predictors for a cluster. We then fit the universal model on the transformed data of 1,398 open source projects hosted on SourceForge and GoogleCode. Adding context factors to the universal model improves the predictive power. The universal model obtains prediction performance comparable to the within-project models and yields similar results when applied on five external projects (one Apache and four Eclipse projects). These results suggest that a universal defect prediction model may be an achievable goal.
Fósseis
O documento discute a importância dos fósseis para compreender a história da Terra, incluindo reconstituir paleoambientes, datar rochas e traçar a evolução de espécies. Fósseis preservam restos de seres vivos enterrados em rochas e podem formar-se quando organismos são rapidamente enterrados. Espécies como ginkgo, nautilo e celacanto são exemplos de "fósseis vivos" que mudaram pouco ao longo de milhões de anos.
Improving health workforce performance in Uganda: linking research and practi...
Presentation given by Joanna Raven at the 2015 International Health Conference at St Hugh's College, Oxford on the 25th - 27th June
A Deriva Dos Continentes
Segundo Alfred Wegener, há cerca de 200 milhões de anos os continentes faziam parte de um supercontinente chamado Pangeia, que se separou em dois continentes, Laurásia e Gondwana, há cerca de 70 milhões de anos, originando a deriva dos continentes até às suas posições atuais.
Model For Estimating Diversity Presentation
Simple probability model for estimate the population diversity. Here a hybrid model using I. Good and Toulming estimators.
Single Source of Truth in a Distributed World by Sven Erik Knop
This document discusses the advantages and disadvantages of centralized version control systems (CVCS) and distributed version control systems (DVCS). It notes that while DVCS provide flexibility and independence, enterprises require a single source of truth for project consistency, security, and compliance. The document proposes a hybrid model using Perforce Helix that provides the benefits of both centralized and distributed version control by allowing developers to use native DVCS and Git tools locally while maintaining a centralized system for visibility, management, and security.
Gradient Dynamical Systems, Bifurcation Theory, Numerical Methods and Applica...
This document is a presentation on gradient dynamical systems, bifurcation theory, numerical methods, and applications. It discusses dynamical systems, phase portraits, linear and nonlinear systems of ordinary differential equations, bifurcations, bifurcation diagrams, numerical methods for constructing bifurcation diagrams, and two examples - a chemical reactor system and a cluster of three charged atoms.
Método de newton raphson
El documento describe el método de Newton-Raphson para encontrar raíces de ecuaciones. Explica que el método usa una aproximación lineal de la función en un punto para encontrar un valor mejorado. Luego, provee los pasos del algoritmo, incluyendo seleccionar un valor inicial, calcular iterativamente nuevos valores usando la ecuación de Newton-Raphson hasta alcanzar la precisión deseada, y provee un ejemplo numérico para encontrar una raíz de una ecuación dada.
engineering_your_future.ppt
This document provides an overview of engineering history and the various engineering disciplines and functions. It begins with a definition of engineering and describes major developments throughout history from ancient civilizations to modern times. The disciplines of aerospace, agricultural, chemical, civil, computer, electrical, industrial, and mechanical engineering are then introduced. The chapter concludes by discussing the various functions engineers can work in, such as research, development, testing, design, analysis, systems, manufacturing, operations, and maintenance.
Energy audit Energy audit presentation
The document discusses energy auditing as a tool to increase energy efficiency. It provides information on the purpose and process of conducting an energy audit. An energy audit involves collecting and analyzing energy consumption and use data, identifying opportunities for energy savings, and recommending efficiency measures. The document also includes a case study of conducting an energy audit at a chemical company to analyze energy use in buildings and production processes and identify potential savings.
More Related Content
Viewers also liked
Gambit Summer 2009 Talk
A talk given by Fire Hose Games to the MIT GAMBIT video game lab about rapid, iterative video game prototyping. The presentation covers many tips and tricks for quickly making useful game prototypes
Cfd analysis of_centrifugal_pump
This document summarizes a CFD analysis of a centrifugal pump. The objectives were to analyze the pump at different flow conditions, plot characteristic curves, and analyze cavitation. The analysis used ANSYS Fluent and CFX to model the solid pump components with over 19 million mesh elements. Boundary conditions were applied to simulate flow rates from 22 to 34 kg/s. Results showed maximum efficiency of 89.24% occurring at the design flow rate, and lower efficiency under cavitation due to higher power needs to pump vapor. Pressure and velocity plots as well as performance curves matched published literature values.
Diplomado Desarrollo y Gestión de Contenidos Digitales UC
Este documento presenta el Diplomado en Desarrollo y Gestión de Contenidos Digitales de la Facultad de Comunicaciones UC. El diplomado se compone de cuatro cursos repartidos en dos semestres y está dirigido a profesionales relacionados con contenidos digitales. El cuerpo académico incluye expertos en medios digitales, periodismo, diseño y gestión de proyectos.
Personality & the Brain: A new perspective on the ISTP
Through the lens of the Striving Styles, each of the Myers-Briggs Type Indicator® (MBTI®) 16 Types comes alive. Discover which quadrant of the brain the ISTP prefers to use and the predominant, innate psychological need that drives the ISTP's behavior as well as how an ISTP can leverage their whole brain in order to develop and achieve their potential.
The SSPS shows that each of the four quadrants of the brain has their own role, or function, to play in our personality and our consciousness. Based on Jung's Theory of Psychological Type, we are hard-wired to prefer one function or quadrant over the others and we use each quadrant or function in either an inwardly or an outwardly way.
A web como recurso didáctico
Presentación da web como recurso didáctico pertencente ao módulo MF1443-3 do certificado de profesionalidade DOCENCIA DA FORMACIÓN PROFESIONAL PARA O EMPREGO
Title Fonts - Main Task
The document evaluates three different title fonts - Aparajita, Euphemia, and Adobe Myungjo Std M - for a horror film titled "The Onslaught". Aparajita was deemed too sophisticated and not creepy enough. Euphemia had consistent text weighting but letters like L and G were too formal or casual. Adobe Myungjo Std M was determined to be the best choice as it was stripped back yet creepy, with consistent text weighting and a tidy curved G that fit the desired sophisticated yet scary tone.
Conventions of opening scenes
The document discusses various conventions for opening scenes in films. It explains that the purpose of an opening is to catch the audience's attention and introduce them to the characters and genre. Some common types of openings are establishing shots, which set the location; flashbacks, which provide backstory; narration, which gives context; and action scenes, which aim to hook viewers. Other techniques include opening credits, title sequences, animation, photo compilations, and setting the mood with music.
Terra Como Sistema
O documento descreve o sistema Terra, composto por atmosfera, água, seres vivos e solo, que interagem entre si. A água é o componente mais abundante e essencial à vida, modelando a superfície terrestre. A atmosfera regula a temperatura e protege o planeta. O solo cobre 1/4 da superfície e forma-se a partir da alteração das rochas. Os seres vivos dependem direta ou indiretamente da energia solar, água e nutrientes para sobreviver.
Cape Coral FL Canal Cruise
Join us on one of our favorite short boating trips on Cape Coral saltwater canals to Longboards outdoor cabana bar at Cape Harbour.
perforacion diamantinA
El documento describe la geología y recursos mineros del Perú. Explica la historia geológica del país desde la deriva de los continentes hasta la formación actual, incluyendo la tectónica de placas. También describe las principales provincias y distritos mineros del Perú y su importancia a nivel mundial en la producción de metales como plata, cobre y zinc.
Towards Building a Universal Defect Prediction Model
To predict files with defects, a suitable prediction model must be built for a software project from either itself (withinproject) or other projects (cross-project). A universal defect prediction model that is built from the entire set of diverse projects would relieve the need for building models for an individual project. A universal model could also be interpreted as a basic relationship between software metrics and defects. However, the variations in the distribution of predictors pose a formidable obstacle to build a universal model. Such variations exist among projects with different context factors (e.g., size and programming language). To overcome this challenge, we propose context-aware rank transformations for predictors. We cluster projects based on the similarity of the distribution of 26 predictors, and derive the rank transformations using quantiles of predictors for a cluster. We then fit the universal model on the transformed data of 1,398 open source projects hosted on SourceForge and GoogleCode. Adding context factors to the universal model improves the predictive power. The universal model obtains prediction performance comparable to the within-project models and yields similar results when applied on five external projects (one Apache and four Eclipse projects). These results suggest that a universal defect prediction model may be an achievable goal.
Fósseis
O documento discute a importância dos fósseis para compreender a história da Terra, incluindo reconstituir paleoambientes, datar rochas e traçar a evolução de espécies. Fósseis preservam restos de seres vivos enterrados em rochas e podem formar-se quando organismos são rapidamente enterrados. Espécies como ginkgo, nautilo e celacanto são exemplos de "fósseis vivos" que mudaram pouco ao longo de milhões de anos.
Improving health workforce performance in Uganda: linking research and practi...
Presentation given by Joanna Raven at the 2015 International Health Conference at St Hugh's College, Oxford on the 25th - 27th June
A Deriva Dos Continentes
Segundo Alfred Wegener, há cerca de 200 milhões de anos os continentes faziam parte de um supercontinente chamado Pangeia, que se separou em dois continentes, Laurásia e Gondwana, há cerca de 70 milhões de anos, originando a deriva dos continentes até às suas posições atuais.
Model For Estimating Diversity Presentation
Simple probability model for estimate the population diversity. Here a hybrid model using I. Good and Toulming estimators.
Single Source of Truth in a Distributed World by Sven Erik Knop
This document discusses the advantages and disadvantages of centralized version control systems (CVCS) and distributed version control systems (DVCS). It notes that while DVCS provide flexibility and independence, enterprises require a single source of truth for project consistency, security, and compliance. The document proposes a hybrid model using Perforce Helix that provides the benefits of both centralized and distributed version control by allowing developers to use native DVCS and Git tools locally while maintaining a centralized system for visibility, management, and security.
Gradient Dynamical Systems, Bifurcation Theory, Numerical Methods and Applica...
This document is a presentation on gradient dynamical systems, bifurcation theory, numerical methods, and applications. It discusses dynamical systems, phase portraits, linear and nonlinear systems of ordinary differential equations, bifurcations, bifurcation diagrams, numerical methods for constructing bifurcation diagrams, and two examples - a chemical reactor system and a cluster of three charged atoms.
Método de newton raphson
El documento describe el método de Newton-Raphson para encontrar raíces de ecuaciones. Explica que el método usa una aproximación lineal de la función en un punto para encontrar un valor mejorado. Luego, provee los pasos del algoritmo, incluyendo seleccionar un valor inicial, calcular iterativamente nuevos valores usando la ecuación de Newton-Raphson hasta alcanzar la precisión deseada, y provee un ejemplo numérico para encontrar una raíz de una ecuación dada.
Viewers also liked (20)
Diplomado Desarrollo y Gestión de Contenidos Digitales UC
Diplomado Desarrollo y Gestión de Contenidos Digitales UC
Personality & the Brain: A new perspective on the ISTP
Personality & the Brain: A new perspective on the ISTP
Towards Building a Universal Defect Prediction Model
Towards Building a Universal Defect Prediction Model
Improving health workforce performance in Uganda: linking research and practi...
Improving health workforce performance in Uganda: linking research and practi...
Single Source of Truth in a Distributed World by Sven Erik Knop
Single Source of Truth in a Distributed World by Sven Erik Knop
Gradient Dynamical Systems, Bifurcation Theory, Numerical Methods and Applica...
Gradient Dynamical Systems, Bifurcation Theory, Numerical Methods and Applica...
Similar to Application of CFD and numerical optimisation methods in solving environmental problems in industry
engineering_your_future.ppt
This document provides an overview of engineering history and the various engineering disciplines and functions. It begins with a definition of engineering and describes major developments throughout history from ancient civilizations to modern times. The disciplines of aerospace, agricultural, chemical, civil, computer, electrical, industrial, and mechanical engineering are then introduced. The chapter concludes by discussing the various functions engineers can work in, such as research, development, testing, design, analysis, systems, manufacturing, operations, and maintenance.
Energy audit Energy audit presentation
The document discusses energy auditing as a tool to increase energy efficiency. It provides information on the purpose and process of conducting an energy audit. An energy audit involves collecting and analyzing energy consumption and use data, identifying opportunities for energy savings, and recommending efficiency measures. The document also includes a case study of conducting an energy audit at a chemical company to analyze energy use in buildings and production processes and identify potential savings.
Fire Resistance of Materials & Structures - Assessment of Structural in a Fur...
This document is Seyed Mohammad Sadegh Mousavi's 6th homework on assessing the structural integrity of a furniture shop after a fire. It considers 14 fire scenarios with varying fire loads and growth rates to model temperature curves within concrete columns. Temperature profiles from the modeling are compared to nondestructive test results on the columns to determine the most probable fire scenario. The residual bearing capacity of the columns is then assessed based on the correlated maximum temperatures.
Pe syllabus upto_4th_year_18.06.13
The document provides a syllabus for B.Tech Production Engineering at a university. It outlines the courses, subjects, credits, and structure for each semester of the 4-year degree program.
The syllabus includes both theory and practical/lab courses each semester, with subjects covering areas like values and ethics, physics, environmental engineering, mechanics, materials, manufacturing processes, heat transfer, machine design, automation, and more. Elective subjects allow students to specialize in their areas of interest.
Semesters include 17-19 hours per week of theory classes and 12-15 hours of practical/lab sessions. Students also complete a semester-long project in their final year and internships between semesters to
Lesson3 tunnel design
1) The lecture discusses various topics related to tunnel design including cross sections, alignment, costs, and installations.
2) Different tunnel profiles are presented for various transportation purposes like roads, railways, and underground water conduits. Factors like cross sectional area, aerodynamic pressure, and costs are compared between single and double tube tunnel designs.
3) Key considerations for tunnel alignment include geological conditions, traffic needs, environmental impacts, and safety. Installations discussed include systems for traffic control, telecommunications, ventilation, fire protection, lighting, and drainage.
Lesson3 tunnel design
1) The lecture discusses various topics related to tunnel design including cross sections, alignment, costs, and installations.
2) Different tunnel profiles are presented for various transportation purposes like roads, railways, and underground water conduits. Factors like cross sectional area, aerodynamic pressure, and costs are compared between single and double tube tunnel designs.
3) Key considerations for tunnel alignment include geological conditions, traffic needs, environmental impacts, and safety. Installations discussed include systems for traffic control, telecommunications, ventilation, fire protection, lighting, and drainage.
Similar to Application of CFD and numerical optimisation methods in solving environmental problems in industry (6)
Fire Resistance of Materials & Structures - Assessment of Structural in a Fur...
Fire Resistance of Materials & Structures - Assessment of Structural in a Fur...
More from aciddtic21
Sharing Initiatives for a green and connected city
The document outlines the agenda for a conference on green and connected cities held by the European Forum Committee of Regions. The conference featured discussions on European strategies for using information and communication technologies (ICT) to promote sustainable development. Speakers addressed topics such as frameworks for green connected cities, initiatives from researchers and industries, and how digital technologies can enable new forms of citizen participation and solidarity. The goal of the event was to share best practices and discuss next steps toward building more sustainable and digitally-enabled communities.
World Digital Solidarity
The document discusses digital solidarity, which aims to promote an inclusive and sustainable information society through cooperation between local actors in information technology and telecommunications. It describes the creation of the Digital Solidarity Fund and Agency in 2005 to provide funding, expertise, and networking to support capacity building for digital skills at the local community level. The upcoming World Conference on Digital Solidarity in Lyon will focus on redefining priorities, improving innovative financing mechanisms, and structuring the Fund and Agency to better fulfill their role as catalysts for multi-stakeholder partnerships.
The Global Digital Solidarity Fund
European Forum "Sharing initiatives for a green and connected city" - 27 May 2008 - Committee of the Regions, Brussels
The value chain of resource efficiency
European Forum "Sharing initiatives for a green and connected city" - 27 May 2008 - Committee of the Regions, Brussels
High tech low carbon: the role of the European digital technology industry in...
The document discusses the role of the European digital technology industry in addressing climate change. It notes that the industry comprises 10,000 companies, provides over 3 million jobs, and accounts for 6% of EU GDP but only 2% of global CO2 emissions. It then gives examples of how the industry has improved energy efficiency in its own operations and products over time, such as reducing the energy use of Nokia base stations from 2001-2006 and the eco-efficiency of mobile phones from 1993-2003. Finally, it states that technology can enhance, enable and transform other sectors to use energy more efficiently.
Green Networks: Connected Urban Development
European Forum "Sharing initiatives for a green and connected city" - 27 May 2008 - Committee of the Regions, Brussels
The European Network of Living Labs and ICT for Sustainable Energy
The document discusses the European Network of Living Labs (ENoLL) and how living labs can promote user-driven open innovation, especially for technologies related to sustainable energy. It provides examples of living labs that are testing energy solutions like alternative energies, energy conservation in smart homes and buildings, and smart grids. ENoLL aims to create a platform where users, businesses, and governments can collaborate to develop and test new technologies, business models, and services in real-life settings.
R&D for digital and sustainable societies
European Forum "Sharing initiatives for a green and connected city" - 27 May 2008 - Committee of the Regions, Brussels
Low Carbon London: challenges, opportunities and changing behaviour
European Forum "Sharing initiatives for a green and connected city" - 27 May 2008 - Committee of the Regions, Brussels
How green is your city? Measuring and developping sustainable cities
European Forum "Sharing initiatives for a green and connected city" - 27 May 2008 - Committee of the Regions, Brussels
Bologna digital city
European Forum "Sharing initiatives for a green and connected city" - 27 May 2008 - Committee of the Regions, Brussels
European Union Policy regarding environmental changes
European Forum "Sharing initiatives for a green and connected city" - 27 May 2008 - Committee of the Regions, Brussels
More from aciddtic21 (12)
Sharing Initiatives for a green and connected city
Sharing Initiatives for a green and connected city
High tech low carbon: the role of the European digital technology industry in...
High tech low carbon: the role of the European digital technology industry in...
The European Network of Living Labs and ICT for Sustainable Energy
The European Network of Living Labs and ICT for Sustainable Energy
Low Carbon London: challenges, opportunities and changing behaviour
Low Carbon London: challenges, opportunities and changing behaviour
How green is your city? Measuring and developping sustainable cities
How green is your city? Measuring and developping sustainable cities
European Union Policy regarding environmental changes
European Union Policy regarding environmental changes
Recently uploaded
Northern Engraving | Nameplate Manufacturing Process - 2024
Manufacturing custom quality metal nameplates and badges involves several standard operations. Processes include sheet prep, lithography, screening, coating, punch press and inspection. All decoration is completed in the flat sheet with adhesive and tooling operations following. The possibilities for creating unique durable nameplates are endless. How will you create your brand identity? We can help!
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
This LF Energy webinar took place June 20, 2024. It featured:
-Alex Thornton, LF Energy
-Hallie Cramer, Google
-Daniel Roesler, UtilityAPI
-Henry Richardson, WattTime
In response to the urgency and scale required to effectively address climate change, open source solutions offer significant potential for driving innovation and progress. Currently, there is a growing demand for standardization and interoperability in energy data and modeling. Open source standards and specifications within the energy sector can also alleviate challenges associated with data fragmentation, transparency, and accessibility. At the same time, it is crucial to consider privacy and security concerns throughout the development of open source platforms.
This webinar will delve into the motivations behind establishing LF Energy’s Carbon Data Specification Consortium. It will provide an overview of the draft specifications and the ongoing progress made by the respective working groups.
Three primary specifications will be discussed:
-Discovery and client registration, emphasizing transparent processes and secure and private access
-Customer data, centering around customer tariffs, bills, energy usage, and full consumption disclosure
-Power systems data, focusing on grid data, inclusive of transmission and distribution networks, generation, intergrid power flows, and market settlement data
Demystifying Knowledge Management through Storytelling
The Department of Veteran Affairs (VA) invited Taylor Paschal, Knowledge & Information Management Consultant at Enterprise Knowledge, to speak at a Knowledge Management Lunch and Learn hosted on June 12, 2024. All Office of Administration staff were invited to attend and received professional development credit for participating in the voluntary event.
The objectives of the Lunch and Learn presentation were to:
- Review what KM ‘is’ and ‘isn’t’
- Understand the value of KM and the benefits of engaging
- Define and reflect on your “what’s in it for me?”
- Share actionable ways you can participate in Knowledge - - Capture & Transfer
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
How we managed to grow and scale a RAG application from zero to thousands of users in 7 months. Lessons from technical challenges around managing high load for LLMs, RAGs and Vector databases.
Leveraging the Graph for Clinical Trials and Standards
Katja Glaß
OpenStudyBuilder Community Manager - Katja Glaß Consulting
Marius Conjeaud
Principal Consultant - Neo4j
Lee Barnes - Path to Becoming an Effective Test Automation Engineer.pdf
So… you want to become a Test Automation Engineer (or hire and develop one)? While there’s quite a bit of information available about important technical and tool skills to master, there’s not enough discussion around the path to becoming an effective Test Automation Engineer that knows how to add VALUE. In my experience this had led to a proliferation of engineers who are proficient with tools and building frameworks but have skill and knowledge gaps, especially in software testing, that reduce the value they deliver with test automation.
In this talk, Lee will share his lessons learned from over 30 years of working with, and mentoring, hundreds of Test Automation Engineers. Whether you’re looking to get started in test automation or just want to improve your trade, this talk will give you a solid foundation and roadmap for ensuring your test automation efforts continuously add value. This talk is equally valuable for both aspiring Test Automation Engineers and those managing them! All attendees will take away a set of key foundational knowledge and a high-level learning path for leveling up test automation skills and ensuring they add value to their organizations.
MySQL InnoDB Storage Engine: Deep Dive - Mydbops
This presentation, titled "MySQL - InnoDB" and delivered by Mayank Prasad at the Mydbops Open Source Database Meetup 16 on June 8th, 2024, covers dynamic configuration of REDO logs and instant ADD/DROP columns in InnoDB.
This presentation dives deep into the world of InnoDB, exploring two ground-breaking features introduced in MySQL 8.0:
• Dynamic Configuration of REDO Logs: Enhance your database's performance and flexibility with on-the-fly adjustments to REDO log capacity. Unleash the power of the snake metaphor to visualize how InnoDB manages REDO log files.
• Instant ADD/DROP Columns: Say goodbye to costly table rebuilds! This presentation unveils how InnoDB now enables seamless addition and removal of columns without compromising data integrity or incurring downtime.
Key Learnings:
• Grasp the concept of REDO logs and their significance in InnoDB's transaction management.
• Discover the advantages of dynamic REDO log configuration and how to leverage it for optimal performance.
• Understand the inner workings of instant ADD/DROP columns and their impact on database operations.
• Gain valuable insights into the row versioning mechanism that empowers instant column modifications.
ScyllaDB Tablets: Rethinking Replication
ScyllaDB is making a major architecture shift. We’re moving from vNode replication to tablets – fragments of tables that are distributed independently, enabling dynamic data distribution and extreme elasticity. In this keynote, ScyllaDB co-founder and CTO Avi Kivity explains the reason for this shift, provides a look at the implementation and roadmap, and shares how this shift benefits ScyllaDB users.
Day 2 - Intro to UiPath Studio Fundamentals
In our second session, we shall learn all about the main features and fundamentals of UiPath Studio that enable us to use the building blocks for any automation project.
📕 Detailed agenda:
Variables and Datatypes
Workflow Layouts
Arguments
Control Flows and Loops
Conditional Statements
💻 Extra training through UiPath Academy:
Variables, Constants, and Arguments in Studio
Control Flow in Studio
Must Know Postgres Extension for DBA and Developer during Migration
Mydbops Opensource Database Meetup 16
Topic: Must-Know PostgreSQL Extensions for Developers and DBAs During Migration
Speaker: Deepak Mahto, Founder of DataCloudGaze Consulting
Date & Time: 8th June | 10 AM - 1 PM IST
Venue: Bangalore International Centre, Bangalore
Abstract: Discover how PostgreSQL extensions can be your secret weapon! This talk explores how key extensions enhance database capabilities and streamline the migration process for users moving from other relational databases like Oracle.
Key Takeaways:
* Learn about crucial extensions like oracle_fdw, pgtt, and pg_audit that ease migration complexities.
* Gain valuable strategies for implementing these extensions in PostgreSQL to achieve license freedom.
* Discover how these key extensions can empower both developers and DBAs during the migration process.
* Don't miss this chance to gain practical knowledge from an industry expert and stay updated on the latest open-source database trends.
Mydbops Managed Services specializes in taking the pain out of database management while optimizing performance. Since 2015, we have been providing top-notch support and assistance for the top three open-source databases: MySQL, MongoDB, and PostgreSQL.
Our team offers a wide range of services, including assistance, support, consulting, 24/7 operations, and expertise in all relevant technologies. We help organizations improve their database's performance, scalability, efficiency, and availability.
Contact us: info@mydbops.com
Visit: https://www.mydbops.com/
Follow us on LinkedIn: https://in.linkedin.com/company/mydbops
For more details and updates, please follow up the below links.
Meetup Page : https://www.meetup.com/mydbops-databa...
Twitter: https://twitter.com/mydbopsofficial
Blogs: https://www.mydbops.com/blog/
Facebook(Meta): https://www.facebook.com/mydbops/
QR Secure: A Hybrid Approach Using Machine Learning and Security Validation F...
QR Secure: A Hybrid Approach Using Machine Learning and Security Validation Functions to Prevent Interaction with Malicious QR Codes.
Aim of the Study: The goal of this research was to develop a robust hybrid approach for identifying malicious and insecure URLs derived from QR codes, ensuring safe interactions.
This is achieved through:
Machine Learning Model: Predicts the likelihood of a URL being malicious.
Security Validation Functions: Ensures the derived URL has a valid certificate and proper URL format.
This innovative blend of technology aims to enhance cybersecurity measures and protect users from potential threats hidden within QR codes 🖥 🔒
This study was my first introduction to using ML which has shown me the immense potential of ML in creating more secure digital environments!
Session 1 - Intro to Robotic Process Automation.pdf
👉 Check out our full 'Africa Series - Automation Student Developers (EN)' page to register for the full program:
https://bit.ly/Automation_Student_Kickstart
In this session, we shall introduce you to the world of automation, the UiPath Platform, and guide you on how to install and setup UiPath Studio on your Windows PC.
📕 Detailed agenda:
What is RPA? Benefits of RPA?
RPA Applications
The UiPath End-to-End Automation Platform
UiPath Studio CE Installation and Setup
💻 Extra training through UiPath Academy:
Introduction to Automation
UiPath Business Automation Platform
Explore automation development with UiPath Studio
👉 Register here for our upcoming Session 2 on June 20: Introduction to UiPath Studio Fundamentals: https://community.uipath.com/events/details/uipath-lagos-presents-session-2-introduction-to-uipath-studio-fundamentals/
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
Direct losses from downtime in 1 minute = $5-$10 thousand dollars. Reputation is priceless.
As part of the talk, we will consider the architectural strategies necessary for the development of highly loaded fintech solutions. We will focus on using queues and streaming to efficiently work and manage large amounts of data in real-time and to minimize latency.
We will focus special attention on the architectural patterns used in the design of the fintech system, microservices and event-driven architecture, which ensure scalability, fault tolerance, and consistency of the entire system.
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
"Choosing proper type of scaling", Olena Syrota
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
AWS Certified Solutions Architect Associate (SAA-C03)
AWS Certified Solutions Architect Associate (SAA-C03)
Recently uploaded (20)
Northern Engraving | Nameplate Manufacturing Process - 2024
Northern Engraving | Nameplate Manufacturing Process - 2024
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
Demystifying Knowledge Management through Storytelling
Demystifying Knowledge Management through Storytelling
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
Leveraging the Graph for Clinical Trials and Standards
Leveraging the Graph for Clinical Trials and Standards
Lee Barnes - Path to Becoming an Effective Test Automation Engineer.pdf
Lee Barnes - Path to Becoming an Effective Test Automation Engineer.pdf
Must Know Postgres Extension for DBA and Developer during Migration
Must Know Postgres Extension for DBA and Developer during Migration
QR Secure: A Hybrid Approach Using Machine Learning and Security Validation F...
QR Secure: A Hybrid Approach Using Machine Learning and Security Validation F...
Session 1 - Intro to Robotic Process Automation.pdf
Session 1 - Intro to Robotic Process Automation.pdf
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
Poznań ACE event - 19.06.2024 Team 24 Wrapup slidedeck
Poznań ACE event - 19.06.2024 Team 24 Wrapup slidedeck
AWS Certified Solutions Architect Associate (SAA-C03)
AWS Certified Solutions Architect Associate (SAA-C03)
Application of CFD and numerical optimisation methods in solving environmental problems in industry
- 2. 40m 400m 164 pots 18m Natural ventilation in the pots-hall 1 Pictures of the building and the numerical model
- 3. Natural ventilation in the pots-hall 2 Calculation results of flow and visualisation of the flow
- 5. Numerical investigation of flow around the buildings Calculated streamlines and distribution of the pollution
- 6. Investigation of the exhausting system of the pots hall 1 Drawing and numerical models of the exhausting system
- 7. Investigation of the exhausting system of the pots hall 2 Numerical model, initial data and calculated results
- 8. Thank you for your kind attention ! University of Miskolc Department of Fluid and Heat Engineering