Alpha exactalloy Solder preforms for product and process improvementreginahuse
There is an Exactalloy™ preform in the rightshape and size to improve your assembly operation, product reliability and quality. Get Technical support from Krayden Regarding Alpha product and its proper application method.
Development of a Wire and Cable Extrusion Line for Processing Polyolefins Con...LDriscoll11
Due to concerted environmental regulations, some of the halogenated flame retardants such as decabromodiphenyl ether are being phased out. The focus of this project is to complete an investigation into the effectiveness of a bio-derived non-halogenated flame retardant material. Ultimately, the proprietary flame retardant could be compounded into a polyethylene resin to accommodate wire and cable grade products. The successful qualification of the flame retardant will serve as an alternative to current halogenated additives. Extensive testing has shown the ability to reduce the rate of thermal degradation, and has indicated the ability to be melt processed with the base resin. Processability was found to be effected only slightly by increasing loading levels as well.
Alpha exactalloy Solder preforms for product and process improvementreginahuse
There is an Exactalloy™ preform in the rightshape and size to improve your assembly operation, product reliability and quality. Get Technical support from Krayden Regarding Alpha product and its proper application method.
Development of a Wire and Cable Extrusion Line for Processing Polyolefins Con...LDriscoll11
Due to concerted environmental regulations, some of the halogenated flame retardants such as decabromodiphenyl ether are being phased out. The focus of this project is to complete an investigation into the effectiveness of a bio-derived non-halogenated flame retardant material. Ultimately, the proprietary flame retardant could be compounded into a polyethylene resin to accommodate wire and cable grade products. The successful qualification of the flame retardant will serve as an alternative to current halogenated additives. Extensive testing has shown the ability to reduce the rate of thermal degradation, and has indicated the ability to be melt processed with the base resin. Processability was found to be effected only slightly by increasing loading levels as well.
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
2024 State of Marketing Report – by HubspotMarius Sescu
https://www.hubspot.com/state-of-marketing
· Scaling relationships and proving ROI
· Social media is the place for search, sales, and service
· Authentic influencer partnerships fuel brand growth
· The strongest connections happen via call, click, chat, and camera.
· Time saved with AI leads to more creative work
· Seeking: A single source of truth
· TLDR; Get on social, try AI, and align your systems.
· More human marketing, powered by robots
ChatGPT is a revolutionary addition to the world since its introduction in 2022. A big shift in the sector of information gathering and processing happened because of this chatbot. What is the story of ChatGPT? How is the bot responding to prompts and generating contents? Swipe through these slides prepared by Expeed Software, a web development company regarding the development and technical intricacies of ChatGPT!
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
2024 State of Marketing Report – by HubspotMarius Sescu
https://www.hubspot.com/state-of-marketing
· Scaling relationships and proving ROI
· Social media is the place for search, sales, and service
· Authentic influencer partnerships fuel brand growth
· The strongest connections happen via call, click, chat, and camera.
· Time saved with AI leads to more creative work
· Seeking: A single source of truth
· TLDR; Get on social, try AI, and align your systems.
· More human marketing, powered by robots
ChatGPT is a revolutionary addition to the world since its introduction in 2022. A big shift in the sector of information gathering and processing happened because of this chatbot. What is the story of ChatGPT? How is the bot responding to prompts and generating contents? Swipe through these slides prepared by Expeed Software, a web development company regarding the development and technical intricacies of ChatGPT!
Product Design Trends in 2024 | Teenage EngineeringsPixeldarts
The realm of product design is a constantly changing environment where technology and style intersect. Every year introduces fresh challenges and exciting trends that mold the future of this captivating art form. In this piece, we delve into the significant trends set to influence the look and functionality of product design in the year 2024.
How Race, Age and Gender Shape Attitudes Towards Mental HealthThinkNow
Mental health has been in the news quite a bit lately. Dozens of U.S. states are currently suing Meta for contributing to the youth mental health crisis by inserting addictive features into their products, while the U.S. Surgeon General is touring the nation to bring awareness to the growing epidemic of loneliness and isolation. The country has endured periods of low national morale, such as in the 1970s when high inflation and the energy crisis worsened public sentiment following the Vietnam War. The current mood, however, feels different. Gallup recently reported that national mental health is at an all-time low, with few bright spots to lift spirits.
To better understand how Americans are feeling and their attitudes towards mental health in general, ThinkNow conducted a nationally representative quantitative survey of 1,500 respondents and found some interesting differences among ethnic, age and gender groups.
Technology
For example, 52% agree that technology and social media have a negative impact on mental health, but when broken out by race, 61% of Whites felt technology had a negative effect, and only 48% of Hispanics thought it did.
While technology has helped us keep in touch with friends and family in faraway places, it appears to have degraded our ability to connect in person. Staying connected online is a double-edged sword since the same news feed that brings us pictures of the grandkids and fluffy kittens also feeds us news about the wars in Israel and Ukraine, the dysfunction in Washington, the latest mass shooting and the climate crisis.
Hispanics may have a built-in defense against the isolation technology breeds, owing to their large, multigenerational households, strong social support systems, and tendency to use social media to stay connected with relatives abroad.
Age and Gender
When asked how individuals rate their mental health, men rate it higher than women by 11 percentage points, and Baby Boomers rank it highest at 83%, saying it’s good or excellent vs. 57% of Gen Z saying the same.
Gen Z spends the most amount of time on social media, so the notion that social media negatively affects mental health appears to be correlated. Unfortunately, Gen Z is also the generation that’s least comfortable discussing mental health concerns with healthcare professionals. Only 40% of them state they’re comfortable discussing their issues with a professional compared to 60% of Millennials and 65% of Boomers.
Race Affects Attitudes
As seen in previous research conducted by ThinkNow, Asian Americans lag other groups when it comes to awareness of mental health issues. Twenty-four percent of Asian Americans believe that having a mental health issue is a sign of weakness compared to the 16% average for all groups. Asians are also considerably less likely to be aware of mental health services in their communities (42% vs. 55%) and most likely to seek out information on social media (51% vs. 35%).
AI Trends in Creative Operations 2024 by Artwork Flow.pdfmarketingartwork
This article is all about what AI trends will emerge in the field of creative operations in 2024. All the marketers and brand builders should be aware of these trends for their further use and save themselves some time!
A report by thenetworkone and Kurio.
The contributing experts and agencies are (in an alphabetical order): Sylwia Rytel, Social Media Supervisor, 180heartbeats + JUNG v MATT (PL), Sharlene Jenner, Vice President - Director of Engagement Strategy, Abelson Taylor (USA), Alex Casanovas, Digital Director, Atrevia (ES), Dora Beilin, Senior Social Strategist, Barrett Hoffher (USA), Min Seo, Campaign Director, Brand New Agency (KR), Deshé M. Gully, Associate Strategist, Day One Agency (USA), Francesca Trevisan, Strategist, Different (IT), Trevor Crossman, CX and Digital Transformation Director; Olivia Hussey, Strategic Planner; Simi Srinarula, Social Media Manager, The Hallway (AUS), James Hebbert, Managing Director, Hylink (CN / UK), Mundy Álvarez, Planning Director; Pedro Rojas, Social Media Manager; Pancho González, CCO, Inbrax (CH), Oana Oprea, Head of Digital Planning, Jam Session Agency (RO), Amy Bottrill, Social Account Director, Launch (UK), Gaby Arriaga, Founder, Leonardo1452 (MX), Shantesh S Row, Creative Director, Liwa (UAE), Rajesh Mehta, Chief Strategy Officer; Dhruv Gaur, Digital Planning Lead; Leonie Mergulhao, Account Supervisor - Social Media & PR, Medulla (IN), Aurelija Plioplytė, Head of Digital & Social, Not Perfect (LI), Daiana Khaidargaliyeva, Account Manager, Osaka Labs (UK / USA), Stefanie Söhnchen, Vice President Digital, PIABO Communications (DE), Elisabeth Winiartati, Managing Consultant, Head of Global Integrated Communications; Lydia Aprina, Account Manager, Integrated Marketing and Communications; Nita Prabowo, Account Manager, Integrated Marketing and Communications; Okhi, Web Developer, PNTR Group (ID), Kei Obusan, Insights Director; Daffi Ranandi, Insights Manager, Radarr (SG), Gautam Reghunath, Co-founder & CEO, Talented (IN), Donagh Humphreys, Head of Social and Digital Innovation, THINKHOUSE (IRE), Sarah Yim, Strategy Director, Zulu Alpha Kilo (CA).
Trends In Paid Search: Navigating The Digital Landscape In 2024Search Engine Journal
The search marketing landscape is evolving rapidly with new technologies, and professionals, like you, rely on innovative paid search strategies to meet changing demands.
It’s important that you’re ready to implement new strategies in 2024.
Check this out and learn the top trends in paid search advertising that are expected to gain traction, so you can drive higher ROI more efficiently in 2024.
You’ll learn:
- The latest trends in AI and automation, and what this means for an evolving paid search ecosystem.
- New developments in privacy and data regulation.
- Emerging ad formats that are expected to make an impact next year.
Watch Sreekant Lanka from iQuanti and Irina Klein from OneMain Financial as they dive into the future of paid search and explore the trends, strategies, and technologies that will shape the search marketing landscape.
If you’re looking to assess your paid search strategy and design an industry-aligned plan for 2024, then this webinar is for you.
5 Public speaking tips from TED - Visualized summarySpeakerHub
From their humble beginnings in 1984, TED has grown into the world’s most powerful amplifier for speakers and thought-leaders to share their ideas. They have over 2,400 filmed talks (not including the 30,000+ TEDx videos) freely available online, and have hosted over 17,500 events around the world.
With over one billion views in a year, it’s no wonder that so many speakers are looking to TED for ideas on how to share their message more effectively.
The article “5 Public-Speaking Tips TED Gives Its Speakers”, by Carmine Gallo for Forbes, gives speakers five practical ways to connect with their audience, and effectively share their ideas on stage.
Whether you are gearing up to get on a TED stage yourself, or just want to master the skills that so many of their speakers possess, these tips and quotes from Chris Anderson, the TED Talks Curator, will encourage you to make the most impactful impression on your audience.
See the full article and more summaries like this on SpeakerHub here: https://speakerhub.com/blog/5-presentation-tips-ted-gives-its-speakers
See the original article on Forbes here:
http://www.forbes.com/forbes/welcome/?toURL=http://www.forbes.com/sites/carminegallo/2016/05/06/5-public-speaking-tips-ted-gives-its-speakers/&refURL=&referrer=#5c07a8221d9b
ChatGPT and the Future of Work - Clark Boyd Clark Boyd
Everyone is in agreement that ChatGPT (and other generative AI tools) will shape the future of work. Yet there is little consensus on exactly how, when, and to what extent this technology will change our world.
Businesses that extract maximum value from ChatGPT will use it as a collaborative tool for everything from brainstorming to technical maintenance.
For individuals, now is the time to pinpoint the skills the future professional will need to thrive in the AI age.
Check out this presentation to understand what ChatGPT is, how it will shape the future of work, and how you can prepare to take advantage.
A brief introduction to DataScience with explaining of the concepts, algorithms, machine learning, supervised and unsupervised learning, clustering, statistics, data preprocessing, real-world applications etc.
It's part of a Data Science Corner Campaign where I will be discussing the fundamentals of DataScience, AIML, Statistics etc.
Time Management & Productivity - Best PracticesVit Horky
Here's my presentation on by proven best practices how to manage your work time effectively and how to improve your productivity. It includes practical tips and how to use tools such as Slack, Google Apps, Hubspot, Google Calendar, Gmail and others.
The six step guide to practical project managementMindGenius
The six step guide to practical project management
If you think managing projects is too difficult, think again.
We’ve stripped back project management processes to the
basics – to make it quicker and easier, without sacrificing
the vital ingredients for success.
“If you’re looking for some real-world guidance, then The Six Step Guide to Practical Project Management will help.”
Dr Andrew Makar, Tactical Project Management
Beginners Guide to TikTok for Search - Rachel Pearson - We are Tilt __ Bright...
ANTEC 2011 - Penn State Behrend College
1. SCHOOL DESIGNATION SHOULD FIT WITHIN
CONFINES OF TEXT BOX
INVESTIGATION INTO PART WARPAGE DIFFERENCES BETWEEN ALUMINUM AND
STEEL TOOLING
Chad M. Shumaker
INTRODUCTION
Laird Samuel Raybuck Jr.
Warpage has been an issue in the plastics industry due to part design and various
processing parameters. More previously known aluminum has greater cooling Penn State Erie, The Behrend College
properties than common P20 grade steel. The down fall to aluminum is its wear Erie, PA
characteristics. This makes it more common in prototype molding and used less in
full production. If a company were to utilize the faster cycle times and decease in
warpage they will be able to make higher quality parts, faster. IN THIS EXPERIMENT, AN OFAT WAS PERFORMED TO COMPARE RESULTS
OF COOLING PROPERTIES AND THE REDUCTION OF OVERALL CYCLE TIME
RESULTS AND WARPAGE OF ALUMINUM AND P20 STEEL INSERTS WITH
ABS (X-Direction) ABS (Y-Direction) CONVENTIONAL COOLING CHANNELS. A FLIR A-20 DIGITAL INFRARED Figure (3-3)
0.9 1.4
CAMERA TOOK THERMAL IMAGES OF PARTS AND INSERTS AND THE The PE Steel Core versus Aluminum Core shows a mold temperature difference of 5 to
0.8
1.2
AVANT 400 CROV OPTICAL SCOPE WAS USED TO MEASURE WARPAGE. 10 °C in most areas at 5 seconds of cooling.
0.7
1 FOUR DIFFERENT MATERIALS WERE USED TO ACHIEVE THIS, PE, NYLON,
0.6
0.5
0.8 ABS, AND PC. WATER TEMPERATURES USED IN THE EXPERIMENT WERE
Warpage
Warpage
(mm.)
0.4
Warpage-AL
(mm.)
0.6
Warpage-AL KEPT CONSISTENT FOR THE MATERIALS WHEN SWITCHING BETWEEN THE
Warpage-Steel
INSERTS. RESULTS SHOWED AND AVERAGE OF 10
Warpage-Steel
0.3 0.4
C IN MOLD
0.2
TEMPERATURE WHICH RESULTED IN AN AVERAGE OF ONE MILLIMETER IN
0.2
0.1 WARPAGE IN PARTS RAN IN THE ALUMINUM INSERTS.
0
0 10 15 20 25 30 45 60
10 15 20 25 30 45 60 Cooling Time (sec.)
Cooling Time (sec.)
Figure (1-1) Figure (1-2) Figure (4-1)
ABS warpage in the X-Direction decreases ABS warpage in the Y-Direction decreases The PE Steel Core at 20 seconds versus Aluminum Core at 5 seconds shows a
as cooling time increases. There is as cooling time increases in the steel mold temperature difference of 5°C in most areas. The steel tooling remains at a
approximately 0.2 mm difference between the Inserts and increases then decreases in warmer temperature even with the extended cycle time.
steel and aluminum inserts. the aluminum inserts. There is
approximately 0.4 mm difference between
the two inserts.
Figure (3-3) .
PE (X-Direction)
3
PE (Y-Direction) The PE Steel Core versus Aluminum Core shows a mold temperature
3
difference of 10 to 15 °C in most areas at 5 seconds of cooling.
2.5
2.5
2
2
Warpage
1.5 Warpage
(mm.) 1.5
Warpage-AL (mm.)
Warpage-AL
Warpage-Steel
Warpage-Steel
1
1
Figure (4-2)
0.5
0.5 The PE part made with steel tooling versus a PE part made with Aluminum PE part shows
0
0
a mold temperature difference of 10 to 15°C in most areas at 20 seconds cooling.
10 15 20 25 30 45 60
10 15 20 25 30 45 60
Cooling Time (sec.)
Cooling Time (sec.)
CONCLUSION
Results showed an average of ten degrees Celsius in mold temperature which resulted
Figure (2-2) in an average of one millimeter in warpage in parts ran in the aluminum inserts when
Figure (2-1)
PE warpage in the X-Direction decreases compared to steel. This is because the thermal conductivity of the aluminum is higher
PE warpage in the X-Direction varies
as cooling time increases. There is than that of the steel. This made for uneven shrinkages during cooling which made the
as cooling time increases. There is
approximately 2 mm difference between the Figure (3-2) part warp. Cooling a part faster will force the polymer chains to keep their shape and
approximately 0.5 mm difference between the
steel and aluminum inserts. The PE Steel Cavity versus Aluminum Cavity shows a mold temperature not relax which decreases shrinkage. The warpage in the X-Direction was much less
steel and aluminum inserts.
difference of 10 to 15 °C in most areas at 5 seconds cooling. than that of the Y-Direction because of the length of the sides. The Y-Direction has a
longer wall which decreases its rigidity and allowing it to shrink more. The different
cooling temperatures showed that it took 15 seconds longer for the steel to reach
approximately the same temperature in the core in the PE parts. This makes cycle time
significantly longer which in turn would make the production run longer.
2011 ANTEC