ANSYS HF training_tentative_agenda

•Download as PPTX, PDF•

0 likes•487 views

This document outlines a two-day training agenda for ANSYS HFSS and SIwave software. Day 1 focuses on ANSYS HFSS and includes lectures and workshops on topics like coaxial resonator filters, ports, antennas, EMI simulations, and transient analysis. Day 2 covers ANSYS SIwave, with sessions on importing layout designs, impedance analysis, package extraction, channel parameters, and electrothermal simulation. Both days conclude with group discussions.

© 2015 ANSYS, Inc. 1
Training Agenda (Tentative)
Introduction Training in ANSYS High Frequency
ANSYS HFSS
ANSYS SIwave

© 2015 ANSYS, Inc. 2
DAY 1
ANSYS HFSS Introductory Training
09:00 – 9:15 Registration & Welcome
09:15 – 10:00 Introduction to ANSYS HFSS
10:00 – 10:10 Lecture 01: Coaxial Resonator Filter
10:10 – 11:00 Workshop 01 – Coaxial Resonator Filter
11:00 – 11:15 Coffee Break
11:15 – 11:25 Lecture 02: HFSS Lumped and Wave Ports Basics
11:25 – 12:15 Workshop 2 – HFSS Lumped and Wave Ports Basics
12:15 - 13:00 Lunch Break
13:00 – 13:10 Lecture 03: Rectangular Patch Antenna
13:10 – 14:00 Workshop 03 –Rectangular Patch Antenna
14:00 – 14:10 Lecture 04: EMI
14:10 – 15:00 Workshop 04 – EMI example
15:00 – 15:15 Coffee Break
15:15 – 15:25 Lecture 05:HFSS-Transient for TDR and ESD Simulations
15:25 – 16:30 Workshop 05 – HFSS-Transient for TDR and ESD Simulations
16:30 – 17:00 Discussion

© 2015 ANSYS, Inc. 3
Day 2
ANSYS SIwave Introductory Training
09:00 – 09:15 Registration & Welcome
09:15 – 10:00 Introduction to ANSYS SIwave
10:00 – 10:10 Lecture 01: Layout Design Import & Basic Checks
10:10 – 11:00 Workshop 01 – Layout Design Import & Basic Checks
11:00 – 11:15 Coffee Break
11:15 – 11:25 Lecture 02: PCB Z0 and XTalk Scan
11:25 – 12:15 Workshop 02 – PCB Z0 and XTalk Scan
12:15 – 13:00 Lunch Break
13:00 – 13:10 Lecture 03: Package PDN RLGC Extraction
13:10 – 14:00 Workshop 03 –Package PDN RLGC Extraction
14:00 – 14:10 Lecture 04: Channel S-parameter Extraction
14:10 -15:00 Workshop 04 –Channel S-parameter Extraction
15:00 – 15:15 Coffee Break
15:15 – 15:25 Lecture 05: DC IR simulation and electrothermal analysis
15:25 -16:30 Workshop 05 –DC IR simulation and electrothermal analysis
16:30 – 17:00 Discussion

The document outlines a two-day training agenda for ANSYS HFSS and SIwave software. Day 1 focuses on ANSYS HFSS and includes lectures and workshops on dielectric resonators, antenna design, EMI analysis, and on-chip spiral inductors. Day 2 covers ANSYS SIwave, with topics like resonant modes, impedance analysis, package on PCB merge, and DC current and voltage analysis. Each day involves a mix of introductory lectures and hands-on workshops with breaks for coffee and lunch.

Ansys Technology Day in Budapest, Agenda

SIMTEC Software and Services

1st Ansys Technology Day in Athens, Agenda

SIMTEC Software and Services

1st Ansys Technology Day in Athens,Agenda

SIMTEC Software and Services

Agenda_Techonoly_Day_v4.pptx

SIMTEC Software and Services

Agenda_Techonoly_Day_v3.pptx

SIMTEC Software and Services

Agenda - Online Introductory Training for Electromagnetics 2023H1 .pptx

SIMTEC Software and Services

Agenda_Techonoly_Day_Slovenia.pptx

SIMTEC Software and Services

Simtec Europe organizes the 1st Ansys Technology Day in Ljubljana, Slovenia, June 1st. Register this free live event, to learn anything there is to know about Ansys! Discover the key to success with Simtec! You will learn about new Ansys products and acquisitions and all the simulation tips and tricks from Simtec experts. This event is a great opportunity to meet industry peers and simulation gurus. You will also have the chance to learn how simtec and ansys have helped some of Slovenia's industry best to improve their products!

The document outlines an introductory training agenda for Ansys Medini Analyze taking place on June 7th, 2023. The training will cover an introduction to Medini Analyze software, best practices for templates, standards and items, performing hazard analysis and risk assessment, defining safety goals and requirements, conducting fault tree analysis and failure mode and effects analysis, and addressing cybersecurity concerns.

Website Agenda - Online Introductory Training for Design Optimization 2023H1....

SIMTEC Software and Services

Agenda - Online Introductory Training for Electromagnetics 2023H1 .pptx

SIMTEC Software and Services

Agenda - Online Introductory Training CFD-FEA 2023H1 .pptx

SIMTEC Software and Services

Website Agenda - Online Introductory Training for Design Optimization 2023H1....

SIMTEC Software and Services

Formula Student Workshop 4 October 2022.pdf

SIMTEC Software and Services

The document announces a Formula Student Workshop hosted by SIMTEC S.A. and ANSYS on October 4th, 2022 at the Central Computer Lab of Aristotle University of Thessaloniki. The workshop agenda includes sessions on computational fluid dynamics (CFD) and finite element analysis (FEA) challenges for Formula SAE projects led by presenters from ANSYS and SIMTEC, as well as sessions on materials selection using Granta software and electronics challenges for Formula SAE projects.

Agenda - Introductory Training CFD for NTUA 2022H1_v2.pdf

SIMTEC Software and Services

The document outlines a two-day introductory training agenda in Ansys CFD for the National Technical University of Athens. Day one will cover introductions to Ansys Hellas, Simtec SA, and meshing in Ansys SpaceClaim, Fluent, and Workbench. Attendees will learn about preparing geometry, different meshing workflows and controls. Day two focuses on Ansys Fluent, including the CFD process, setting up simulations, solving, post-processing, and best practices.

Agenda - Introductory Training CFD for NTUA 2022H1.pdf

SIMTEC Software and Services

The document outlines a two-day online training agenda for introductory Ansys CFD. Day one covers CFD activities at Ansys Hellas, fluid roles in Greece, and an internship presentation. It also introduces Ansys SpaceClaim and Fluent meshing workflows. Day two focuses on Ansys Fluent, including setting up domains and physics, solving, and best practices. Meshing methods and controls are also addressed.

Website Agenda - Online Introductory Training for Aqwa 2022H1.pdf

SIMTEC Software and Services

The document outlines an online introductory training agenda for ANSYS Aqwa taking place on May 11th, 2022. The training will cover how to setup and perform hydrodynamic analyses in ANSYS Aqwa, including defining waves, current and wind, analyzing multi-body systems with hydrodynamic interaction, and understanding the load mapping workflow. Trainees will learn the ANSYS Aqwa analysis workflow in ANSYS Workbench and how to model and analyze the hydrodynamic response of systems, including the effects of forward speed.

Website Agenda - Online Introductory Training for Design Optimization 2022H1 ...

SIMTEC Software and Services

This document provides an agenda for an online introductory training in Ansys design optimization held on May 20th and 31st, 2022. The May 20th session will cover an introduction to Ansys Optimetrics, analytical derivatives, optimizing a probe-fed patch antenna with Optimetrics, and PCB manufacturing tolerances. The May 31st session will focus on an introduction to Ansys optiSLang, its graphical user interface and process integration, integration with ANSYS Workbench and other tools, and sensitivity analysis and design optimization.

Website Agenda - Online Introductory Training CFD-FEA 2022H1.pdf

SIMTEC Software and Services

This document outlines an online training agenda from May 23rd to 27th 2022 on introductory training for Ansys CFD/FEA software. The training includes sessions on Ansys CFD and FEA meshing, Ansys Fluent for CFD analysis, Ansys Mechanical for structural analysis, and Ansys LS-DYNA for explicit dynamics analysis. Each day focuses on a different Ansys software module and covers topics like preprocessing, solving, postprocessing and best practices.

Website Agenda - Online Introductory Training for Icepak 2022H1.pdf

SIMTEC Software and Services

The online training agenda covers an introductory training in Ansys Icepak on May 13th, 2022. The training will cover how to create and import geometry into Ansys Icepak and Spaceclaim, how to set up models with inputs and boundary conditions for flow and thermal simulations, how to mesh models, configure solver settings for steady state and transient modeling, perform parametric analyses, and post-process results.

Website Agenda - Online Introductory Training for Aqwa 2022H1.pdf

SIMTEC Software and Services

The document outlines an online introductory training agenda for ANSYS Aqwa taking place on May 17th, 2022. The training will cover how to setup and perform hydrodynamic analyses in ANSYS Aqwa, including defining waves, current and wind, analyzing multi-body hydrodynamic interactions, and understanding the load mapping workflow. Trainees will learn the ANSYS Aqwa analysis workflow in ANSYS Workbench and how to model and analyze the hydrodynamic response of systems with considerations for forward speed, cables, articulations and fenders.

Agenda online introductory training for design optimization 2022 h1 (1)

SIMTEC Software and Services

This document provides an agenda for an online introductory training in Ansys design optimization held on May 27th and 31st, 2022. The first session on May 27th will cover an introduction to Ansys Optimetrics, analytical derivatives, optimizing a probe-fed patch antenna, and PCB manufacturing tolerances. The second session on May 31st will introduce Ansys optiSLang, its graphical user interface, integration with ANSYS Workbench and other tools, and sensitivity analysis and design optimization.

Agenda online introductory training for design optimization 2022 h1

SIMTEC Software and Services

This document provides an agenda for an online introductory training in Ansys design optimization held on May 28th and 31st 2022. The training on May 28th will cover an introduction to Ansys optiSLang, its graphical user interface, process integration with ANSYS Workbench, Fluent, Mechanical and third party tools, and sensitivity analysis and design optimization. The training on May 31st will cover an introduction to Ansys Optimetrics, analytical derivatives, a probe-fed patch antenna case study using Optimetrics, and analyzing PCB manufacturing tolerances.

Agenda online introductory training for electromagnetics 2022 h1

SIMTEC Software and Services

This document provides an agenda for an online introductory training in Ansys electromagnetics from May 10th to 19th, 2022. On May 10th, the training will cover Ansys Maxwell and will include introductions to its magnetostatic, electrostatic, eddy current, magnetic transient, parametric analysis, and multiphysics solvers. On May 12th, the training shifts to Ansys HFSS and will cover eigenmodes, s-parameters, meshing, electromagnetic interference, optimization, and transient analysis. Finally, on May 19th, the training concludes with Ansys SIwave covering its import process, ports, s-parameters, scans, impedance profiles, crosstalk,

Agenda online introductory training cfd-fea 2022 h1

SIMTEC Software and Services

This document outlines the agenda for an online introductory training in ANSYS CFD/FEA held from April 4-8, 2022. The training covers topics including ANSYS Spaceclaim, Workbench meshing, Fluent, Mechanical, and LS-DYNA. Each day focuses on different ANSYS software and includes lectures and workshops on core skills, modeling techniques, simulations, and more. Attendees will learn how to prepare and analyze geometries, generate meshes, set up physics definitions, solve simulations, and post-process results across the ANSYS suite of products.

Agenda online introductory training for electromagnetics 2021 h2

SIMTEC Software and Services

This document outlines an online training agenda for introductory training in Ansys electromagnetics software over three dates in November and December 2021. On November 24th, the training will cover Ansys Maxwell for magnetostatic, electrostatic, eddy current, and magnetic transient analysis. On November 25th, the focus is on Ansys HFSS for eigenmodes, s-parameters, meshing, EMI, derivatives, and optimization. Finally, on December 2nd, Ansys SIwave will be covered for signal, power, and thermal integrity applications and simulations.

Agenda online introductory training cfd-fea 2021 h2

SIMTEC Software and Services

This document outlines the agenda for an online introductory training in ANSYS CFD/FEA held from October 18-22, 2021. The training covers topics including ANSYS Spaceclaim, Workbench meshing, Fluent, Mechanical, and LS-DYNA. Each day focuses on different ANSYS software and includes lectures, workshops, and breaks. Day 1 covers Spaceclaim and Workbench meshing for CFD. Day 2 focuses on ANSYS Fluent getting started. Day 3 covers Spaceclaim and Workbench meshing for FEA. Day 4 covers ANSYS Mechanical preprocessing, analysis, and postprocessing. The final day covers explicit analysis using LS-DYNA.

Agenda online introductory training for design optimization 2021 h2

SIMTEC Software and Services

This 3-day online training agenda covers an introductory training in Ansys Design Optimization. On the 26th of November 2021, the training will provide an introduction to Ansys optiSLang, cover its graphical user interface and process integration, and demonstrate its integration with ANSYS Workbench, Fluent, Mechanical and other third party tools. It will also cover topics on sensitivity analysis and design optimization.

Electric vehicle and photovoltaic advanced roles in enhancing the financial p...

IJECEIAES

Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network

ITSM Integration with MuleSoft.pptx

VANDANAMOHANGOUDA

Recently uploaded

Electric vehicle and photovoltaic advanced roles in enhancing the financial p...

IJECEIAES

ITSM Integration with MuleSoft.pptx

VANDANAMOHANGOUDA

Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...

shadow0702a

This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL. The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process. The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging. It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal. Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages. Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.

一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理

upoux

原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。本公司拥有海外各大学样板无数，能完美还原。 1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700 【主营项目】一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！二.真实使馆公证(即留学回国人员证明,不成功不收费) 三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度) 如果您处于以下几种情况： ◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】 ◇面对父母的压力，希望尽快拿到； ◇不清楚认证流程以及材料该如何准备； ◇回国时间很长，忘记办理； ◇回国马上就要找工作，办给用人单位看； ◇企事业单位必须要求办理的 ◇需要报考公务员、购买免税车、落转户口 ◇申请留学生创业基金留信网认证的作用: 1:该专业认证可证明留学生真实身份 2:同时对留学生所学专业登记给予评定 3:国家专业人才认证中心颁发入库证书 4:这个认证书并且可以归档倒地方 5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息 6:个人职称评审加20分 7:个人信誉贷款加10分 8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：校徽：象征着学校的荣誉和传承。校名:学校英文全称授予学位：本部分将注明获得的具体学位名称。毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。

Comparative analysis between traditional aquaponics and reconstructed aquapon...

bijceesjournal

The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.

Advanced control scheme of doubly fed induction generator for wind turbine us...

IJECEIAES

This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.

Properties Railway Sleepers and Test.pptx

MDSABBIROJJAMANPAYEL

AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...

Paris Salesforce Developer Group

VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...

PIMR BHOPAL

132/33KV substation case study Presentation

kandramariana6

Curve Fitting in Numerical Methods Regression

Nada Hikmah

学校原版美国波士顿大学毕业证学历学位证书原版一模一样

171ticu

原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma 1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700 留信网认证的作用: 1:该专业认证可证明留学生真实身份 2:同时对留学生所学专业登记给予评定 3:国家专业人才认证中心颁发入库证书 4:这个认证书并且可以归档倒地方 5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息 6:个人职称评审加20分 7:个人信誉贷款加10分 8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才

一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理

nedcocy

原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。本公司拥有海外各大学样板无数，能完美还原。 1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700 【主营项目】一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！二.真实使馆公证(即留学回国人员证明,不成功不收费) 三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度) 如果您处于以下几种情况： ◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】 ◇面对父母的压力，希望尽快拿到； ◇不清楚认证流程以及材料该如何准备； ◇回国时间很长，忘记办理； ◇回国马上就要找工作，办给用人单位看； ◇企事业单位必须要求办理的 ◇需要报考公务员、购买免税车、落转户口 ◇申请留学生创业基金留信网认证的作用: 1:该专业认证可证明留学生真实身份 2:同时对留学生所学专业登记给予评定 3:国家专业人才认证中心颁发入库证书 4:这个认证书并且可以归档倒地方 5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息 6:个人职称评审加20分 7:个人信誉贷款加10分 8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：校徽：象征着学校的荣誉和传承。校名:学校英文全称授予学位：本部分将注明获得的具体学位名称。毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。

4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf

Gino153088

Null Bangalore | Pentesters Approach to AWS IAM

Divyanshu

#Abstract: - Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices. - Gain actionable insights into AWS IAM policies and roles, using hands on approach. #Prerequisites: - Basic understanding of AWS services and architecture - Familiarity with cloud security concepts - Experience using the AWS Management Console or AWS CLI. - For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/) # Scenario Covered: - Basics of IAM in AWS - Implementing IAM Policies with Least Privilege to Manage S3 Bucket - Objective: Create an S3 bucket with least privilege IAM policy and validate access. - Steps: - Create S3 bucket. - Attach least privilege policy to IAM user. - Validate access. - Exploiting IAM PassRole Misconfiguration -Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources. - Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access. - Steps: - Allow user to pass IAM role to EC2. - Exploit misconfiguration for unauthorized access. - Access sensitive resources. - Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role - An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role. - Objective: Show how overly permissive IAM roles can lead to privilege escalation. - Steps: - Create role with administrative privileges. - Allow user to assume the role. - Perform administrative actions. - Differentiation between PassRole vs AssumeRole Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)

2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows.pdf

Yasser Mahgoub

Object Oriented Analysis and Design - OOAD

PreethaV16

SCALING OF MOS CIRCUITS m .pptx

harshapolam10

CompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURS

RamonNovais6

Generative AI Use cases applications solutions and implementation.pdf

mahaffeycheryld

Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges. https://www.leewayhertz.com/generative-ai-use-cases-and-applications/

Recently uploaded (20)

Electric vehicle and photovoltaic advanced roles in enhancing the financial p...

ITSM Integration with MuleSoft.pptx

Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...

一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理

Comparative analysis between traditional aquaponics and reconstructed aquapon...

Advanced control scheme of doubly fed induction generator for wind turbine us...

Properties Railway Sleepers and Test.pptx

AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...

VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...

132/33KV substation case study Presentation

Curve Fitting in Numerical Methods Regression

学校原版美国波士顿大学毕业证学历学位证书原版一模一样

一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理

4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf

Null Bangalore | Pentesters Approach to AWS IAM

2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows.pdf

Object Oriented Analysis and Design - OOAD

SCALING OF MOS CIRCUITS m .pptx

CompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURS

Generative AI Use cases applications solutions and implementation.pdf

ANSYS HF training_tentative_agenda

2. © 2015 ANSYS, Inc. 2 DAY 1 ANSYS HFSS Introductory Training 09:00 – 9:15 Registration & Welcome 09:15 – 10:00 Introduction to ANSYS HFSS 10:00 – 10:10 Lecture 01: Coaxial Resonator Filter 10:10 – 11:00 Workshop 01 – Coaxial Resonator Filter 11:00 – 11:15 Coffee Break 11:15 – 11:25 Lecture 02: HFSS Lumped and Wave Ports Basics 11:25 – 12:15 Workshop 2 – HFSS Lumped and Wave Ports Basics 12:15 - 13:00 Lunch Break 13:00 – 13:10 Lecture 03: Rectangular Patch Antenna 13:10 – 14:00 Workshop 03 –Rectangular Patch Antenna 14:00 – 14:10 Lecture 04: EMI 14:10 – 15:00 Workshop 04 – EMI example 15:00 – 15:15 Coffee Break 15:15 – 15:25 Lecture 05:HFSS-Transient for TDR and ESD Simulations 15:25 – 16:30 Workshop 05 – HFSS-Transient for TDR and ESD Simulations 16:30 – 17:00 Discussion

3. © 2015 ANSYS, Inc. 3 Day 2 ANSYS SIwave Introductory Training 09:00 – 09:15 Registration & Welcome 09:15 – 10:00 Introduction to ANSYS SIwave 10:00 – 10:10 Lecture 01: Layout Design Import & Basic Checks 10:10 – 11:00 Workshop 01 – Layout Design Import & Basic Checks 11:00 – 11:15 Coffee Break 11:15 – 11:25 Lecture 02: PCB Z0 and XTalk Scan 11:25 – 12:15 Workshop 02 – PCB Z0 and XTalk Scan 12:15 – 13:00 Lunch Break 13:00 – 13:10 Lecture 03: Package PDN RLGC Extraction 13:10 – 14:00 Workshop 03 –Package PDN RLGC Extraction 14:00 – 14:10 Lecture 04: Channel S-parameter Extraction 14:10 -15:00 Workshop 04 –Channel S-parameter Extraction 15:00 – 15:15 Coffee Break 15:15 – 15:25 Lecture 05: DC IR simulation and electrothermal analysis 15:25 -16:30 Workshop 05 –DC IR simulation and electrothermal analysis 16:30 – 17:00 Discussion

ANSYS HF training_tentative_agenda

Recommended

Recommended

More Related Content

More from SIMTEC Software and Services

More from SIMTEC Software and Services (20)

Recently uploaded

Recently uploaded (20)

ANSYS HF training_tentative_agenda