SIMTEC, the Elite certified channel partner of Ansys in SE Europe, organizes online introductory training on: Introductory Training in Ansys Electromagnetics. The e-trainings are addressed to engineers from Companies that are involved in the designing process, or in the Research and Development (R&D) of innovative new products and processes.

1. Online Training
Agenda
Introductory Training
in Ansys
Electromagnetics
22nd, 23rd, 24th, 25th of May 2023

2. ©2020 ANSYS, Inc. Unauthorized use, distribution, or duplication is prohibited.
Ansys HFSS 2031R1 Introductory Training – 22 May 2023
 Introduction to Ansys HFSS
 Eigenmodes and s-parameters
 Adaptive, broadband meshing
 Electromagnetic Interference
 Tuning with Analytic Derivatives
 Parametric & Optimization Analysis
 Transient analysis

3. ©2020 ANSYS, Inc. Unauthorized use, distribution, or duplication is prohibited.
Ansys SIwave 2023R1 Introductory Training – 23 May 2023
 Introduction to Ansys SIwave
 Import process
 Setting Ports and s-parameters
 PCB scan, impedance profiles and crosstalk
 Signal Integrity and Electromagnetic interference
 Power Integrity
 Thermal Integrity

4. ©2020 ANSYS, Inc. Unauthorized use, distribution, or duplication is prohibited.
Ansys Maxwell 2023R1 Introductory Training – 24 May 2021
 Introduction to Ansys Maxwell
 Maxwell Magnetostatic 2D/3D
 Electrostatic Analysis 2D/3D
 Eddy Current solver 2D/3D
 Magnetic Transient
 Parametric Analysis
 Multiphysics

5. ©2020 ANSYS, Inc. Unauthorized use, distribution, or duplication is prohibited.
Ansys Icepak 2023R1 Introductory Training – 25 May 2021
§ Introduction to Ansys Icepak
§ Steps to create/import geometry in ANSYS Icepak and ANSYS Spaceclaim
§ Inputs and boundary conditions required to perform Flow and Thermal
simulations
§ Meshing in ANSYS Icepak
§ Model setup, inputs and boundary conditions
§ Solver settings for steady state and transient modelling
§ Parametric Analyses
§ Result post-processing