At Allengers, we have a dedicated team of experts to manufacture a wide range of medical diagnostic equipment, which have so far turned us into a leading x-ray manufacturer India.
http://www.allengers.com/p/hf-x-ray/hf-x-ray/
The control console allows the technologist to set technical factors like mAs and kVp and make exposures. It contains meters to measure kVp, mA, and exposure time. The console has several circuits including high voltage, filament, and primary circuits. Automatic exposure control uses an ion chamber or photodiode to automatically terminate the exposure when the proper optical density is reached on the image receptor. High voltage generation converts line voltage to kilovolts needed for x-ray production using transformers and rectifiers.
The document discusses guidelines for planning and establishing a diagnostic radiology facility from a radiation safety perspective. It outlines key factors to consider such as proper equipment choice, installation design, and role of qualified staff. For installation design, it recommends locating the facility away from high traffic areas and providing an appropriately sized room, structural shielding, and controlled access points. It also specifies minimum room sizes, wall thicknesses for shielding based on equipment power, and requirements for control rooms, dark rooms, doors, and signage. The overall aim is to reduce radiation exposure to workers, public and patients to as low as reasonably achievable.
This document discusses the layout, planning, and equipment needs for a dark room. It should be located near imaging rooms for convenience and have adequate size, ventilation, and radiation protection. The dark room consists of a processing area with safelights, a viewing area, and storage space. Proper flooring, walls, lighting, and electrical/chemical safety measures should be implemented. Necessary equipment includes an automatic or manual film processor, chemicals, and storage/loading accessories.
The document discusses the responsibilities of a radiographer in a radiology department and hospital. It states that all medical personnel share the common goal of serving patients. It then outlines the specific clinical, ethical, and legal responsibilities of a radiographer. The clinical responsibilities include understanding patient care and psychology, using proper procedures, and providing reassurance. Ethical responsibilities involve maintaining patient confidentiality and minimizing radiation exposure. Legal responsibilities concern breaching confidentiality, negligence, and properly handling any accidents. The document provides detailed guidelines for radiographers to follow in fulfilling these responsibilities toward patients.
Aerb guidelines for x ray and ct installationAabid Rahiman
This document provides guidelines from the Atomic Energy Regulatory Board (AERB) of India for the installation and regulation of x-ray and CT equipment. It outlines the functions of AERB which include recommending safety guidelines, approving new equipment and facility layouts, and enforcing regulations. The guidelines cover requirements for equipment certification, facility registration, appointing a qualified Radiation Safety Officer, and other responsibilities of employers, licensees, and radiation workers to ensure compliance with safety standards.
All medical personnel share same thing in common, they all serve the patients. no one of them is entirely independent of others. the patient is a reason for existence in whole organisation. hence, the duty of RADIOGRAPHER must be seen in relation to the patient in particular and hospital as a whole.
Recent advancements in modern x ray tubeSantosh Ojha
All the advancements in X-ray tubes till date are done to increase the Tube heat storage capacity thus increasing the lifetime of x -ray tubes. This slide explains about these recent advancements in x-ray tubes.
The control console allows the technologist to set technical factors like mAs and kVp and make exposures. It contains meters to measure kVp, mA, and exposure time. The console has several circuits including high voltage, filament, and primary circuits. Automatic exposure control uses an ion chamber or photodiode to automatically terminate the exposure when the proper optical density is reached on the image receptor. High voltage generation converts line voltage to kilovolts needed for x-ray production using transformers and rectifiers.
The document discusses guidelines for planning and establishing a diagnostic radiology facility from a radiation safety perspective. It outlines key factors to consider such as proper equipment choice, installation design, and role of qualified staff. For installation design, it recommends locating the facility away from high traffic areas and providing an appropriately sized room, structural shielding, and controlled access points. It also specifies minimum room sizes, wall thicknesses for shielding based on equipment power, and requirements for control rooms, dark rooms, doors, and signage. The overall aim is to reduce radiation exposure to workers, public and patients to as low as reasonably achievable.
This document discusses the layout, planning, and equipment needs for a dark room. It should be located near imaging rooms for convenience and have adequate size, ventilation, and radiation protection. The dark room consists of a processing area with safelights, a viewing area, and storage space. Proper flooring, walls, lighting, and electrical/chemical safety measures should be implemented. Necessary equipment includes an automatic or manual film processor, chemicals, and storage/loading accessories.
The document discusses the responsibilities of a radiographer in a radiology department and hospital. It states that all medical personnel share the common goal of serving patients. It then outlines the specific clinical, ethical, and legal responsibilities of a radiographer. The clinical responsibilities include understanding patient care and psychology, using proper procedures, and providing reassurance. Ethical responsibilities involve maintaining patient confidentiality and minimizing radiation exposure. Legal responsibilities concern breaching confidentiality, negligence, and properly handling any accidents. The document provides detailed guidelines for radiographers to follow in fulfilling these responsibilities toward patients.
Aerb guidelines for x ray and ct installationAabid Rahiman
This document provides guidelines from the Atomic Energy Regulatory Board (AERB) of India for the installation and regulation of x-ray and CT equipment. It outlines the functions of AERB which include recommending safety guidelines, approving new equipment and facility layouts, and enforcing regulations. The guidelines cover requirements for equipment certification, facility registration, appointing a qualified Radiation Safety Officer, and other responsibilities of employers, licensees, and radiation workers to ensure compliance with safety standards.
All medical personnel share same thing in common, they all serve the patients. no one of them is entirely independent of others. the patient is a reason for existence in whole organisation. hence, the duty of RADIOGRAPHER must be seen in relation to the patient in particular and hospital as a whole.
Recent advancements in modern x ray tubeSantosh Ojha
All the advancements in X-ray tubes till date are done to increase the Tube heat storage capacity thus increasing the lifetime of x -ray tubes. This slide explains about these recent advancements in x-ray tubes.
This document discusses the proper construction, equipment, and safety procedures for a radiology dark room. It outlines important considerations for the location, size, ventilation, lighting, entrance types, and hazards associated with a dark room. Key pieces of equipment like cassettes, film hangers, and processing chemicals and their uses are described. Common problems that can occur with screen film radiography like crossover exposure, cassette artifacts, and dirty/damaged screens are also reviewed.
This document discusses quality assurance and quality control tests for diagnostic x-ray equipment. It defines quality assurance as maintaining high quality imaging through personnel training and evaluation, while quality control refers to evaluating radiographic equipment and identifying issues. Regular quality control tests check parameters like radiation and optical field alignment, focal spot size, tube voltage accuracy, exposure timer accuracy, total filtration, and radiation leakage. Performing these tests ensures optimal image quality, minimum radiation exposure, and cost effectiveness of diagnostic x-ray equipment.
X-ray rooms require shielded walls, floors, and ceilings to protect from radiation. Lead is a suitable shielding material that absorbs x-ray energies. Floors are typically made of vinyl or tile and must have a shielding equivalent to at least 1mm of lead. Walls can be made of brick, concrete, or lead paint and must extend from the floor to a height of at least 2m. The ceiling provides insulation and sound absorption with a recommended lead thickness of 1-2mm. Protective barriers for doors and windows use leaded glass or lead shielding. Lighting levels and construction materials must be assessed based on room dimensions and workload.
Magnification(macro and micro radiography), distortionparthajyotidas11
This document discusses the techniques of macroradiography and microradiography. It defines macroradiography as producing a magnified image using increased object to film distance. It describes the principles of magnification using fixed focus-film distance or fixed focus-object distance. Unsharpness from movement or geometry is discussed. Applications include skull and wrist radiography. Microradiography uses ultra-fine film and high voltages for small object imaging. Mass miniature radiography was used to screen for tuberculosis using portable fluoroscopic equipment. Distortion can occur if objects are not parallel to the central x-ray beam.
Mammography is an x-ray exam used to detect breast cancer. Modern mammography machines use low doses of radiation that are considered safe. Screening mammograms are used to check women without symptoms, while diagnostic mammograms examine potential abnormalities. Mammograms produce images of breast tissue that radiologists analyze for signs of cancer such as masses or microcalcifications. While mammography is an important cancer screening tool, it has limitations like false negatives and overdiagnosis. Newer digital mammography techniques aim to improve cancer detection rates.
The Atomic Energy Regulatory Board (AERB) regulates and controls radiation exposure in India. It was formed in 1983 under the Atomic Energy Act and ensures safe use of radiation and nuclear energy. AERB develops safety policies, guidelines and standards. It grants consent for nuclear and radiation facilities, ensures compliance with regulations, and conducts inspections. AERB's functions include safety reviews, licensing, inspections, and enforcement. It aims to allow radiation use without harming people or the environment.
This document discusses quality control and quality assurance for x-ray machines. It outlines various tests that should be conducted, including central beam alignment, focal spot size, tube voltage, and timer checks. These tests help ensure the machine is functioning properly and producing high quality images. Acceptable tolerances and testing frequencies are provided. The roles of the quality assurance committee, including the medical physicist, radiologist, biomedical engineer, and technicians are described.
The document discusses the role and responsibilities of a radiographer in the operating theatre. It outlines the key tasks of preparing equipment, ensuring patient details are entered correctly, and using protective equipment. The radiographer aids surgical procedures by producing diagnostic images to visualize anatomy and equipment placement. Key responsibilities include minimizing radiation dose, maintaining sterilization, effective communication with the surgical team, and working collaboratively to improve imaging techniques.
The document discusses the history and evolution of radiography technology from analog film-based systems to current digital systems. It provides details on the key steps in computed radiography (CR) where imaging plates capture x-ray data which is then digitally processed to create images. CR involves separate image capture and readout processes. The document also describes direct digital radiography (DR) systems which integrate image capture and readout using flat panel detectors, thereby providing a cassette-less workflow. Overall, the document provides an overview of modern digital radiography techniques and their advantages over conventional film-based systems.
Hypotonic duodenography is an x-ray procedure that produces images of the duodenum, the first part of the small intestine. It may be used to detect tumors of the pancreas or areas where pancreatic and bile ducts meet the small intestine. During the procedure, a catheter is inserted into the stomach and duodenum and a contrast agent is administered to highlight the area on x-rays. It takes 30-60 minutes and patients are required to fast beforehand. Potential risks are minimal but include abdominal cramping and reactions to agents used during the procedure.
1. The document discusses the importance of properly identifying radiographs, including avoiding mix-ups and keeping proper medical records.
2. A range of patient information should be included on radiographs, such as name, date of birth, hospital information, and exam details.
3. There are several methods for recording identification information on radiographs, including opaque markers, perforating devices, actinic markers, and photographic markings. New developments include identification printers and digital radiography systems.
1) Fluoroscopy uses pulsed or continuous X-rays and a video camera system to generate real-time moving images of the internal structures of the body.
2) Early fluoroscopy used image intensifiers to convert X-rays to visible light images, while modern digital fluoroscopy uses flat panel detectors and pulse-progressive fluoroscopy to acquire images.
3) Automatic brightness control and magnification allow fluoroscopy units to maintain image brightness and zoom in on areas of interest, while advances in digital technology provide faster imaging, image storage, and lower radiation doses.
TLDs are passive radiation dosimeters that measure ionizing radiation exposure by measuring the intensity of visible light emitted from sensitive crystals when heated after exposure. They were invented in 1954 and are useful for accumulating precise dose measurements over time without real-time readings. TLDs use materials like lithium fluoride and calcium fluoride that emit light through thermoluminescence when heated after absorbing radiation energy. A TLD badge consists of a plastic cassette containing TLD discs under different filters to measure different types of radiation. The discs store radiation energy that is released as light during readout, allowing dose quantification.
Brief definition of Multi-modality Diagnostic facility, Teleradiology, PACS, RIS, Quality Assurance Programme
Explanation of the Quality assurance Committee
Introduction to Chest X-ray technology and CR cassette
Quality Control Tests for Chest x-ray Technology
Introduction to Fluoroscopy Technology
Quality Control test for Fluoroscopy
Quality Assurance Program Review Test
Quality Assurance Drawback
The document is a presentation about radiographic cassettes by Sudil Paudyal. It discusses the functions and features of radiographic cassettes, how they are constructed, the materials used and different types available including single screen, double screen, curved, gridded, multi-section, vacuum, and computed radiography cassettes. It also covers how cassettes should be loaded, unloaded, and cared for to maximize the life of the intensifying screens.
Planning and organization of Radiology DepartmentSelf
This document discusses the planning and organization of a radiology department. It addresses considerations for room layouts, equipment, staffing, and safety. The key points are:
- Radiology room layouts should aim to minimize unnecessary medical exposure to staff and public. Floor plans for x-ray, CT, mammography, and nuclear medicine rooms are presented.
- Location, size, and administration areas should be planned based on hospital reception and services provided. Safety standards from regulatory bodies must be followed.
- Staffing plans involve determining appropriate numbers and types of doctors, technicians, and nurses based on workloads and service timings.
- Equipment procurement, installation, and maintenance are important. Radiation
Gradient coils are used in MRI to spatially encode the MRI signal by creating linear magnetic field gradients in the x, y, and z directions. They are made of conducting loops or strips arranged in patterns like fingerprints that produce calibrated distortions of the main magnetic field. Modern scanners typically use distributed windings in copper sheets etched into complex patterns. Gradient coils are driven by powerful gradient amplifiers and require cooling to handle the heat from switching high currents rapidly. Proper gradient design and performance is crucial for achieving good spatial resolution and image quality in MRI.
Radiological procedure of retrograde urethrography(rgu) and micturatingSanzzuTimilsina
MCU stands for Micturating Cystourethrography. It is a radiological examination of the urethra and bladder by injecting contrast medium through a catheter and imaging the urinary system during voiding.
The contrast medium is diluted in MCU to reduce the risk of adverse reactions from a highly concentrated agent being injected into the bladder.
Pre-warming the contrast medium to body temperature helps reduce spasms of the external urethral sphincter during the procedure.
Stress incontinence refers to involuntary leakage of urine during activities that increase abdominal pressure like coughing, sneezing, lifting etc.
RGU stands for Retrograde Urethrograph
Ward radiography involves performing x-rays for patients who are too ill to be moved to the radiology department. It is done in various medical and surgical wards like ICUs, surgical wards, and emergency rooms. Common exams include chest, abdomen, spine and bone x-rays. Proper equipment handling and infection control measures must be followed. Radiation safety precautions like lead aprons and shields are also used to minimize exposure. Theater radiography refers to x-rays done in operating rooms for procedures like cholangiograms and orthopedic or urological interventions.
Allengers Medical Systems is one among the leading xray machines manufacturers today and owes the same to its deft professionals who are dedicated to creating the best diagnostic machines.
The document discusses various products offered by RMP Infotec Private Limited including water purifiers, solar lamps, microwaves, suits, watches, mobile phones, laptops, and electric bikes. It provides details on the features, specifications, and pricing of each product. It also summarizes the background and operations of RMP and its promoters Mahavir Group and PTR Engineering Services.
This document discusses the proper construction, equipment, and safety procedures for a radiology dark room. It outlines important considerations for the location, size, ventilation, lighting, entrance types, and hazards associated with a dark room. Key pieces of equipment like cassettes, film hangers, and processing chemicals and their uses are described. Common problems that can occur with screen film radiography like crossover exposure, cassette artifacts, and dirty/damaged screens are also reviewed.
This document discusses quality assurance and quality control tests for diagnostic x-ray equipment. It defines quality assurance as maintaining high quality imaging through personnel training and evaluation, while quality control refers to evaluating radiographic equipment and identifying issues. Regular quality control tests check parameters like radiation and optical field alignment, focal spot size, tube voltage accuracy, exposure timer accuracy, total filtration, and radiation leakage. Performing these tests ensures optimal image quality, minimum radiation exposure, and cost effectiveness of diagnostic x-ray equipment.
X-ray rooms require shielded walls, floors, and ceilings to protect from radiation. Lead is a suitable shielding material that absorbs x-ray energies. Floors are typically made of vinyl or tile and must have a shielding equivalent to at least 1mm of lead. Walls can be made of brick, concrete, or lead paint and must extend from the floor to a height of at least 2m. The ceiling provides insulation and sound absorption with a recommended lead thickness of 1-2mm. Protective barriers for doors and windows use leaded glass or lead shielding. Lighting levels and construction materials must be assessed based on room dimensions and workload.
Magnification(macro and micro radiography), distortionparthajyotidas11
This document discusses the techniques of macroradiography and microradiography. It defines macroradiography as producing a magnified image using increased object to film distance. It describes the principles of magnification using fixed focus-film distance or fixed focus-object distance. Unsharpness from movement or geometry is discussed. Applications include skull and wrist radiography. Microradiography uses ultra-fine film and high voltages for small object imaging. Mass miniature radiography was used to screen for tuberculosis using portable fluoroscopic equipment. Distortion can occur if objects are not parallel to the central x-ray beam.
Mammography is an x-ray exam used to detect breast cancer. Modern mammography machines use low doses of radiation that are considered safe. Screening mammograms are used to check women without symptoms, while diagnostic mammograms examine potential abnormalities. Mammograms produce images of breast tissue that radiologists analyze for signs of cancer such as masses or microcalcifications. While mammography is an important cancer screening tool, it has limitations like false negatives and overdiagnosis. Newer digital mammography techniques aim to improve cancer detection rates.
The Atomic Energy Regulatory Board (AERB) regulates and controls radiation exposure in India. It was formed in 1983 under the Atomic Energy Act and ensures safe use of radiation and nuclear energy. AERB develops safety policies, guidelines and standards. It grants consent for nuclear and radiation facilities, ensures compliance with regulations, and conducts inspections. AERB's functions include safety reviews, licensing, inspections, and enforcement. It aims to allow radiation use without harming people or the environment.
This document discusses quality control and quality assurance for x-ray machines. It outlines various tests that should be conducted, including central beam alignment, focal spot size, tube voltage, and timer checks. These tests help ensure the machine is functioning properly and producing high quality images. Acceptable tolerances and testing frequencies are provided. The roles of the quality assurance committee, including the medical physicist, radiologist, biomedical engineer, and technicians are described.
The document discusses the role and responsibilities of a radiographer in the operating theatre. It outlines the key tasks of preparing equipment, ensuring patient details are entered correctly, and using protective equipment. The radiographer aids surgical procedures by producing diagnostic images to visualize anatomy and equipment placement. Key responsibilities include minimizing radiation dose, maintaining sterilization, effective communication with the surgical team, and working collaboratively to improve imaging techniques.
The document discusses the history and evolution of radiography technology from analog film-based systems to current digital systems. It provides details on the key steps in computed radiography (CR) where imaging plates capture x-ray data which is then digitally processed to create images. CR involves separate image capture and readout processes. The document also describes direct digital radiography (DR) systems which integrate image capture and readout using flat panel detectors, thereby providing a cassette-less workflow. Overall, the document provides an overview of modern digital radiography techniques and their advantages over conventional film-based systems.
Hypotonic duodenography is an x-ray procedure that produces images of the duodenum, the first part of the small intestine. It may be used to detect tumors of the pancreas or areas where pancreatic and bile ducts meet the small intestine. During the procedure, a catheter is inserted into the stomach and duodenum and a contrast agent is administered to highlight the area on x-rays. It takes 30-60 minutes and patients are required to fast beforehand. Potential risks are minimal but include abdominal cramping and reactions to agents used during the procedure.
1. The document discusses the importance of properly identifying radiographs, including avoiding mix-ups and keeping proper medical records.
2. A range of patient information should be included on radiographs, such as name, date of birth, hospital information, and exam details.
3. There are several methods for recording identification information on radiographs, including opaque markers, perforating devices, actinic markers, and photographic markings. New developments include identification printers and digital radiography systems.
1) Fluoroscopy uses pulsed or continuous X-rays and a video camera system to generate real-time moving images of the internal structures of the body.
2) Early fluoroscopy used image intensifiers to convert X-rays to visible light images, while modern digital fluoroscopy uses flat panel detectors and pulse-progressive fluoroscopy to acquire images.
3) Automatic brightness control and magnification allow fluoroscopy units to maintain image brightness and zoom in on areas of interest, while advances in digital technology provide faster imaging, image storage, and lower radiation doses.
TLDs are passive radiation dosimeters that measure ionizing radiation exposure by measuring the intensity of visible light emitted from sensitive crystals when heated after exposure. They were invented in 1954 and are useful for accumulating precise dose measurements over time without real-time readings. TLDs use materials like lithium fluoride and calcium fluoride that emit light through thermoluminescence when heated after absorbing radiation energy. A TLD badge consists of a plastic cassette containing TLD discs under different filters to measure different types of radiation. The discs store radiation energy that is released as light during readout, allowing dose quantification.
Brief definition of Multi-modality Diagnostic facility, Teleradiology, PACS, RIS, Quality Assurance Programme
Explanation of the Quality assurance Committee
Introduction to Chest X-ray technology and CR cassette
Quality Control Tests for Chest x-ray Technology
Introduction to Fluoroscopy Technology
Quality Control test for Fluoroscopy
Quality Assurance Program Review Test
Quality Assurance Drawback
The document is a presentation about radiographic cassettes by Sudil Paudyal. It discusses the functions and features of radiographic cassettes, how they are constructed, the materials used and different types available including single screen, double screen, curved, gridded, multi-section, vacuum, and computed radiography cassettes. It also covers how cassettes should be loaded, unloaded, and cared for to maximize the life of the intensifying screens.
Planning and organization of Radiology DepartmentSelf
This document discusses the planning and organization of a radiology department. It addresses considerations for room layouts, equipment, staffing, and safety. The key points are:
- Radiology room layouts should aim to minimize unnecessary medical exposure to staff and public. Floor plans for x-ray, CT, mammography, and nuclear medicine rooms are presented.
- Location, size, and administration areas should be planned based on hospital reception and services provided. Safety standards from regulatory bodies must be followed.
- Staffing plans involve determining appropriate numbers and types of doctors, technicians, and nurses based on workloads and service timings.
- Equipment procurement, installation, and maintenance are important. Radiation
Gradient coils are used in MRI to spatially encode the MRI signal by creating linear magnetic field gradients in the x, y, and z directions. They are made of conducting loops or strips arranged in patterns like fingerprints that produce calibrated distortions of the main magnetic field. Modern scanners typically use distributed windings in copper sheets etched into complex patterns. Gradient coils are driven by powerful gradient amplifiers and require cooling to handle the heat from switching high currents rapidly. Proper gradient design and performance is crucial for achieving good spatial resolution and image quality in MRI.
Radiological procedure of retrograde urethrography(rgu) and micturatingSanzzuTimilsina
MCU stands for Micturating Cystourethrography. It is a radiological examination of the urethra and bladder by injecting contrast medium through a catheter and imaging the urinary system during voiding.
The contrast medium is diluted in MCU to reduce the risk of adverse reactions from a highly concentrated agent being injected into the bladder.
Pre-warming the contrast medium to body temperature helps reduce spasms of the external urethral sphincter during the procedure.
Stress incontinence refers to involuntary leakage of urine during activities that increase abdominal pressure like coughing, sneezing, lifting etc.
RGU stands for Retrograde Urethrograph
Ward radiography involves performing x-rays for patients who are too ill to be moved to the radiology department. It is done in various medical and surgical wards like ICUs, surgical wards, and emergency rooms. Common exams include chest, abdomen, spine and bone x-rays. Proper equipment handling and infection control measures must be followed. Radiation safety precautions like lead aprons and shields are also used to minimize exposure. Theater radiography refers to x-rays done in operating rooms for procedures like cholangiograms and orthopedic or urological interventions.
Allengers Medical Systems is one among the leading xray machines manufacturers today and owes the same to its deft professionals who are dedicated to creating the best diagnostic machines.
The document discusses various products offered by RMP Infotec Private Limited including water purifiers, solar lamps, microwaves, suits, watches, mobile phones, laptops, and electric bikes. It provides details on the features, specifications, and pricing of each product. It also summarizes the background and operations of RMP and its promoters Mahavir Group and PTR Engineering Services.
This document provides an overview of Matrix, a company that offers telecom and security products and services. It discusses Matrix's corporate structure, including its offices, factories, R&D center, and training center. It also outlines Matrix's product lines in telephony, including PBX systems, gateways, terminals, and security systems. The document highlights Matrix's focus on quality, recognition with various awards, global customer base across industries, and customer testimonials praising Matrix's products, cost savings, and after sales support.
Milkyway Wiring Harness Private Limited is an Indian company that manufactures and supplies wiring harnesses and automotive electrical systems. They produce products for automotive, industrial, consumer electronics, and telecom applications using high-quality materials. The company aims to satisfy customers through on-time delivery, quality products, and an emphasis on design and manufacturing excellence.
Easilens Healthcare Computers Limited, ever since our establishment in the year 2000. Highly asked for products like Auto Refractometer, Auto Ref-Keratometers and Auto Lensmeters, makes up this range.
Insel Rectifier started its operations with manufacturing of Selenium Rectifiers with Pragmatic business sense, professional approach and success. The company is leading manufacturer of semiconductors in India.
ERA Group is a leading provider of industrial automation and calibration services in Pakistan. It represents several renowned global manufacturers and has been in business since 1995. The company aims to be the best service provider in the country through its ISO-certified, professionally trained team and by exceeding customer expectations with high quality products and support.
A project on consumer behaviour at northern & eastern Odishabhabani shankar dash
The document provides information about Sterling Generators, a manufacturer of diesel generator sets and electrical panels. It is part of the Shapoorji Pallonji Group, one of India's largest construction conglomerates. Sterling Generators operates out of a large, state-of-the-art manufacturing facility in Silvassa, India. The facility fabricates sheet metal parts, assembles bus bars, and uses a 14-step painting and powder coating process to produce generator sets and panels for commercial, industrial and infrastructure clients.
Aimil is an ISO 9001 certified instrumentation company founded in 1932 with over 750 professionals. It aims to provide optimal quality and customer service through innovation and integration of leading edge global technologies. The company serves various industries including aerospace, automotive, construction, and healthcare. It provides a range of instrumentation products and services for noise, vibration, and harshness measurement and analysis.
ALP was established in New Delhi, India and has been a pioneer in introducing various technologies to the region, making successful brands. It has a strong network of key decision makers in the industry who favor ALP's products due to meeting industry requirements and ALP's constant support, training, and unparalleled aftersales service. ALP's research team works with key doctors to evaluate new technologies and devise protocols, and it maintains excellent customer service with a 99% satisfaction rate. ALP has a head office in New Delhi and distribution network across India, currently working with doctors in all major cities.
A professional beauty device manufacturer----beijing sincoheren CompanyMindy Ma
Beijing Sincoheren Company is the most professional manufacturer since 1999. With own R&D team, factory, QC team, after service.
The production is under ISO9001, ISO13485 quality system and match with CE certification.
We have branch office in Australia, Germany, USA.
This document is a presentation by Sunfest Group that outlines their inspirations, values, business verticals, and what enables them to deliver. Their inspirations include sustained growth for all, enabling a simpler efficient world, and creating technologies for a better future. Their key business verticals are defense and homeland security, telecom infrastructure, renewable energy, and exploration infrastructure. What enables their success is infrastructure, experienced people, and their chairman Mr. Adesh Gupta's leadership and experience in the technology sector.
We are one of the leading solution providers in the field of power conditioning and back up solutions. We are also in the business of solar system and IT/AV network design & execution.
We are one of the leading manufacturers and suppliers of the premium quality of Unique Wellness Products. In addition to this, we are engaged in offering the best quality of Vastu Training Consultancy & Study Services.
Vijaya Singh Mehta is a major supplier of distribution and power transformers and servo stabilizers located in Panchkula, Haryana and Nalagarh, Himachal Pradesh. It has been established since 1981 and supplies products to government utilities and private industries across North India. It is ISO 9001 certified and has a team of experienced engineers, technicians, and researchers to design customized, high quality solutions for its customers.
- ADLEC Systems is an electrical products and solutions company in India with over 4 decades of experience and over 105000 square feet of manufacturing space.
- It has over 400 satisfied clients across industries like healthcare, hospitality, IT, telecom, construction, and infrastructure.
- ADLEC aims to expand its manufacturing capacity to over 400000 square feet by adding new facilities in Bahadurgarh and Greater Noida in 2008-2009.
This document provides information about Yes Yes Technologies, a leading manufacturer, marketer, and servicer of weighing machines and weight bridges in India. It introduces the company and its parent company Yes Yes Technologies, which has over a decade of experience in material handling and automation. It then describes the company's weighing division and goals, which include combining expertise with innovative technology, quality control, research and development, and providing after-sales service. The document concludes by listing the company's address and contact details, as well as examples of its customers across various industries.
- Korada Sreenivas is seeking a position in sales, service, or marketing with over 18 years of experience in those areas. He has worked for several companies including Philips Healthcare and Siemens Healthcare in technical specialist, manager, and sales roles.
- He has a proven track record of managing teams, maintaining client relationships, and resolving issues to improve customer satisfaction.
- Sreenivas has an MBA in marketing and engineering qualifications along with various technical trainings related to medical imaging equipment.
Experts in Power Management System – Providing Manufacturing, Repair and Analytical Services for POWER & DISTRIBUTION TRANSFORMERS
NDL Power Limited, is dedicated and committed to provide flexible, integrated, dependable, cost effective and responsive solutions for the Power & Distribution Transformers- Manufactures and Repairs, along with the Operation, Maintenance and Analytical requirements of Power industry. With Our specialization in Power Management System for the last two decades NDL POWER LTD provides a wide range of Power and Distribution Transformers, which along with our variety of Onsite Comprehensive services in context with Operation and maintenance – would ensure optimum power management solution for your industry.
The Fraud Examiner’s Report –
What the Certified Fraud Examiner Should Know
Being a Virtual Training Paper presented at the Association of Certified Fraud Examiners (ACFE) Port Harcourt Chapter Anti-Fraud Training on July 29, 2023.
eBrand Promotion Full Service Digital Agency Company ProfileChimaOrjiOkpi
eBrandpromotion.com is Nigeria’s leading Web Design/development and Digital marketing agency. We’ve helped 600+ clients in 24 countries achieve growth revenue of over $160+ Million USD in 12 Years. Whether you’re a Startup or the Unicorn in your industry, we can help your business/organization grow online. Thinking of taking your business online with a professionally designed world-class website or mobile application? At eBrand, we don’t just design beautiful mobile responsive websites/apps, we can guarantee that you will get tangible results or we refund your money…
METS Lab SASO Certificate Services in Dubai.pdfsandeepmetsuae
Achieving compliance with the Saudi Standards, Metrology and Quality Organization (SASO) regulations is crucial for businesses aiming to enter the Saudi market. METS Laboratories offers comprehensive SASO certification services designed to help companies meet these stringent standards efficiently. Our expert team provides end-to-end support, from initial product assessments to final certification, ensuring that all regulatory requirements are meticulously met. By leveraging our extensive experience and state-of-the-art testing facilities, businesses can streamline their certification process, avoid costly delays, and gain a competitive edge in the market. Trust METS Laboratories to guide you through every step of achieving SASO compliance seamlessly.
Stay updated on Siddhivinayak Temple events and timings in Houston, TX. Join our spiritual and community gatherings. Visit us now! gaurisiddhivinayak.org
Bridging the Language Gap The Power of Simultaneous Interpretation in RwandaKasuku Translation Ltd
Rwanda is a nation on the rise, fostering international partnerships and economic growth. With this progress comes a growing need for seamless communication across languages. Simultaneous interpretation emerges as a vital tool in this ever-evolving landscape. When seeking the best simultaneous interpretation in Rwanda, Kasuku Translation stands out as a premier choice.
Job Vacancies in Norway 🇳🇴
Warehouse Workers for Clothing
2year WORKPERMIT 👍
Salary: €3900-4300 per month (Paid twice a month).
Requirements:
* Duties include quality control of products, order picking, packing goods, and applying stickers and labels.
* Work schedule: 8-10 hours per day, 5 days a week.
Documents 📄
*Adhar
Pan
Photo
Education documents
Basic English**o
Education documents
Basic English**
Photo
Education documents
Basic English**
Biomass Briquettes A Sustainable Solution for Energy and Waste Management..pptxECOSTAN Biofuel Pvt Ltd
Biomass briquettes are an innovative and environmentally beneficial alternative to traditional fossil fuels, providing a long-term solution for energy production and waste management. These compact, high-energy density briquettes are made from organic materials such as agricultural wastes, wood chips, and other biomass waste, and are intended to reduce environmental effect while satisfying energy demands efficiently.
Top 10 Challenges That Every Web Designer Face on A Daily Basis.pptxe-Definers Technology
In today’s fast-moving digital world, building websites is super important for how well a business does online. But, because things keep changing with technology and what people expect, teams who make websites often run into big problems. These problems can slow down their work and stop them from making really good websites. Let us see what the best website designers in Delhi have to say –
https://www.edtech.in/services/website-designing-development-company-delhi.htm
Electrical Testing Lab Services in Dubai.pptxsandeepmetsuae
An electrical testing lab in Dubai plays a crucial role in ensuring the safety and efficiency of electrical systems across various industries. Equipped with state-of-the-art technology and staffed by experienced professionals, these labs conduct comprehensive tests on electrical components, systems, and installations.
Electrical Testing Lab Services in Dubai.pdfsandeepmetsuae
An electrical testing lab in Dubai plays a crucial role in ensuring the safety and efficiency of electrical systems across various industries. Equipped with state-of-the-art technology and staffed by experienced professionals, these labs conduct comprehensive tests on electrical components, systems, and installations.
A Dojo Training PPT focuses on hands-on, immersive learning to enhance skills and knowledge. It emphasizes practical experience, fostering continuous improvement and collaboration within your team to achieve excellence.
The study compares AMUSE's FDM and MJF 3D printing technologies.pptxAmuse
AMUSE offers cutting-edge HP MJF 3D printing services in India that facilitate the effective creation of challenging designs for all kinds of industries.
https://amuse3d.in/hp-mjf-3d-printing-service/
Discover How Long Do Aluminum Gutters Last?SteveRiddle8
Many people wonder how long aluminum gutters last. In this ppt, we will cover the lifetime of aluminum gutters, appropriate maintenance procedures, and the advantages of using this material for gutter installation.
Merchants from high-risk industries face significant challenges due to their industry reputation, chargeback, and refund rates. These industries include sectors like gambling, adult entertainment, and CBD products, which often struggle to secure merchant accounts due to increased risks of chargebacks and fraud.
To overcome these difficulties, it is necessary to improve credit scores, reduce chargeback rates, and provide detailed business information to high-risk merchant account providers to enhance credibility.
Regarding security, implementing robust security measures such as secure payment gateways, two-factor authentication, and fraud detection software that utilizes machine learning systems is crucial.
Forex Copy trading is the mode of trading offering great opportunities to the traders lacking time or in-depth market knowledge, yet willing to use currency trading as a form of investment and to increase their initial funds.
Gujar Industries India Pvt. Ltd is a leading manufacturer of X-ray baggage scanners in India. With a strong focus on innovation and quality, the company has established itself as a trusted provider of security solutions for various industries. Their X-ray baggage scanners are designed to meet the highest standards of safety and efficiency, making them ideal for use in airports, government buildings, and other high-security environments. Gujar Industries India Pvt. Ltd is committed to providing cutting-edge technology and reliable products to ensure the safety and security of their customers.
If you want a spell that is solely about getting your lover back in your arms, this spell has significant energy just to do that for your love life. This spell has the ability to influence your lover to come home no matter what forces are keeping them away. Using my magical native lost love spells, I can bring back your ex-husband or ex-wife to you, if you still love them and want them back.
Even if they have remarried my lost love spells will bring them back and they will love you once again. By requesting this spell; the lost love of your life could be back on their way to you now. This spell does not force love between partners. It works when there is genuine love between the two but for some unforeseen circumstance, you are now apart.
I cast these advanced spells to bring back lost love where I use the supernatural power and forces to reconnect you with one specific person you want back in your existence. Bring back your ex-lover & make them commit to a relationship with you again using bring back lost love spells that will help ex lost lovers forgive each other.
Losing your loved one sometimes can be inevitable but the process of getting your ex love back to you can be extremely very hard. However, that doesn’t mean that you cannot win your ex back any faster. Getting people to understand each other and create the unbreakable bond is the true work of love spells.
Love spells are magically cast with the divine power to make the faded love to re-germinate with the intensive love power to overcome all the challenges.
My effective bring back lost love spells are powerful within 24 hours. Dropping someone you adore is like breaking your heart in two pieces, especially when you are deeply in love with that character. Love is a vital emotion and has power to do the entirety glad and quality, however there comes a time whilst humans are deserted via their loved ones and are deceived, lied, wronged and blamed. Bring back your ex-girlfriend & make them commit to a relationship with you again using bring back lost love spells to make fall back in love with you.
Make your ex-husband to get back with you using bring back lost love spells to make your ex-husband to fall back in love with you & commit to marriage & with you again.
Bring back lost love spells to help ex-lover resolve past difference & forgive each other for past mistakes. Capture his heart & make him yours using love spells.
His powerful lost lover spell works in an effective and fastest way. By using a lover spell by Prof. Balaj, the individuals can bring back lost love. Its essential fascinating powers can bring back lost love, attract new love, or improve an existing relationship. With the right spell and a little faith, individuals can create the lasting and fulfilling relationship everyone has always desired.
Visit https://www.profbalaj.com/love-spells-loves-spells-that-work/ for more info or
Call/WhatsApp +27836633417 NOW FOR GUARANTEED RESULTS
3. “ALLENGERS” – “ALL ENGINEERS”
The name itself denotes that all its promoters are Engineers
THE BIRTH OF A NAME- “ALLENGERS”
4. Name : Suresh Sharma,
Chairman cum Managing
Director
Qualification - B.E ( Electrical )
Experience - More than 35
years experience in similar
field.
FOUNDER
5. Board of Directors
Name : R S Kanwar ,
Designation - Addl, MD
Qualification - B.E ( Hons) –
Electronics
Experience - More than 25
years experience in similar
field.
Functional Responsibilities -
Managing Overseas Sales
Name : R K Narang
Designation - ED (Sales)
Qualification - B.E - Electrical
Experience - More than 39
years experience in similar
field.
Functional Responsibilities -
Managing Domestic Sales
Name : Sanjeev K. Marjara
Designation- ED (Technical )
Qualification - B.E ( Hons) –
Electronics
Experience - More than 15
years of experience.
Functional Responsibilities -
Managing R&D Department
BOARD OF DIRECTORS
6. .
27 YEAR OLD COMPANY
Started in 1987, today ‘Allengers’ has become a mainstay of
modern medical treatment in India & has created a niche of itself.
WE ARE NO 1
NOT BECAUSE WE ARE FAVORITES
BUT
WE ARE FAVORITES
THAT’S WHY WE ARE NO 1
AND STILL SHINING AND GOING STRONG
8. FLAGSHIP COMPANY
•ALLENGERS MEDICAL SYSTEMS LTD. (ESTD. 1987)
Manufacturer of X-Ray based equipments
SISTER CONCERNS
•ALLENGERS GLOBAL HEALTHCARE PRIVATE LTD.
Manufacturer of Cardio and Neuro products
•ALLENGERS INFOTECH PRIVATE LTD.
Software applications - HMS (Hospital Management System) &
PACS (Picture Archiving & Communication System
•ALLENGERS CARE FOUNDATION.
With a view to enhance the mandate of responsible corporate citizenship and
address crucial and contemporary societal concerns, the Foundation endeavors to
emerge as a catalyst.
ALLENGERS AT A GLANCE
15. ACHIEVEMENTS & STRENGTHS
•The largest manufacturing set-up in India.
•More than 25,000 installation base, speaks volumes about our customers trust.
•The largest range of models approved by AERB.
16. •The only Indian company that launched India’s first mobile digital radiography system
in the year 2011.
•The only Indian company that launched India’s first indigenous range of Cathlabs in the
year 2004.
•The only Indian manufacturer having battery powered mobile X-Ray machines (15
KW/30 KW).
•The only Indian manufacturer having the largest range of high frequency X-ray
machines (3.5 KW to 80 KW).
•The only Indian company that exports to more than 70 countries in the continents of
Africa, Asia, South America, Europe, Middle East Countries and Commonwealth
Independent States (CIS).
ACHIEVEMENTS & STRENGTHS
17. Allengers has a market share of approx. 36.5% ( The largest in Indian market ) and has
maintained consistent growth of 25 – 27% per annum for the last three years
ALLENGERS
OTHERS
This is as per the study of a world renowned research organization
ACHIEVEMENTS & STRENGTHS
18.
19. A VERSATILE RANGE OF EQUIPMENTS TO SERVE THE MEDICAL FRATERNITY
RADIOLOGY RANGE
DIGITAL RADIOGRAPHY
DIGITAL MAMMOGRAPHY
CONVENTIONAL
MAMMOGRAPHY
HF X-RAY SYSTEMS
LF X-RAY SYSTEMS
ORTHOPANTOMOGRAM (OPG)
DSA SYSTEMS
CARDIOLOGY RANGE
CATHLAB SYSTEMS
ORTHOPAEDIC RANGE
HF C-ARM IMAGE INTERSIFIER
LF C-ARM IMAGE INTENSIFIER
UROLOGY RANGE
LITHOTRIPTER (E.S.W.L.)
CARDIOLOGY RANGE
ECG
TMT
MPM
NEUROLOGY RANGE
EEG
EMG
PSG
SOFTWARE RANGE
HMS
PACS
ALLENGERS MEDICAL ALLENGERS GLOBAL ALLENGERS INFOTECH
20. ALLENGERS GROUP
PRODUCT RANGE
EEG
EMG
HMS
PACS
HF C-ARM IMAGE INTENSIFIER
LF C-ARM IMAGE INTENSIFIER
LITHOTRIPTER RANGE
CATH LAB SYSTEMS
FIXED SERIES
MOBILE SERIES
ECG
TMT
MPM
MAMMOGRAPHY SYSTEMS
DIGITAL SERIES
CONVENTIONAL SERIES
X-RAY SYSTEMS
HF X-RAY SERIES
LF X-RAY SERIES
DENTAL SYSTEMS
ORTHOPANTOMOGRAM
(OPG)
DSA SYSTEM
24. By virtue of our quality, system and safety standards
we have certifications like
CE
ISO 9001:2008
ISO 13485:2012
AERB
and
BIS
for
our largest product range, which caters to various medical applications
like
Radiology, Cardiology, Orthopaedics,
Gastroenterology, Urology, Neurology, Softwares
25. CE marking signifies that the
product conforms to all EC
directives that apply to it,
such as safety, health, and
environmental protection, and
has had them examined by a
notified conformity assessment
body.
CE
CONFORMITE EUROPEENE
26. With regards to medical
devices, there is no standard
that better represents the
requirements for a
comprehensive management
system than an ISO that
complies with the Medical
Device Directives.
ISO
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
27. All our X-ray based models
adhere to AERB radiation
safety norms in design,
installation and operation of
X-ray equipment made for
medical diagnostic purposes.
AERB
ATOMIC ENERGY REGULATORY BOARD
28. Through the BIS -
A National Standards Body
of India, we adhere to
their quality, safety and
product reliability norms.
BIS
BUREAU OF INDIAN STANDARDS
29. Recognized as
“Star Export House”
by Ministry of
Commerce and Industry,
Govt.of India.
STAR EXPORT HOUSE
30. 30
CRISIL has assigned an `A-‘ credit rating with a
`Stable’ outlook to Allengers Medical Systems
Limited.
To put this rating in perspective, Allengers now is
a member of the prestigious club (A- & above
rated Companies) comprising of only 4.7% out of
the about 38,600 ratings in India.
Out of these 38,600 ratings, 1.5% (less than 600)
are rated A-. It would not be out of place to point
out that this club includes all Public Sector Units,
MNCs, Large Corporates.
Allengers is amongst the top 150 companies in
India with a turnover of less than Rs 300 crores
with an A category rating. Another feather in the
cap of Allengers Medical Systems!!!
CREDIT RATING
31. In order to provide timely and efficient service back-up we
have around 30 Service branches across India.
Our companies main strength is efficient after sales service
which is backed by more than 140 service engineers across India.
Our Service Motto: Lightening Response with A Solution
A PAN India TOLL FREE NO :1800-266-8800
SERVICE
32. FOUR main principles drive Allengers to serve much better:
1-Keeping the best quality with reasonable prices.
2-Developing and searching new products to meet the fast changing
market.
3-Providing satisfied services for the demands of our customers.
4-Customers’ Patronage and continuing support.
The Fourth point is extremely important to us.
33. Our Vision
“To provide high quality world-class medical equipments at affordable prices by
maintaining the highest level of customer satisfaction”.
Our Mission
“Converting our engineering excellence into medical equipments for making the
world a better place to live in”.
..... And we do it as a Team.
OUR VISION ….. OUR MISSION
34. Keeping in mind
our
corporate slogan,
“Passion for excellence”
we
at
Allengers
aim to develop
into a true global business,
one that is respected around the world.