Alarm System/Independent Smoke Detector/ Smoke Sensor with Wired networking ALF-S041 Alf s041-specification-www.ttbvs.com
•Download as DOC, PDF•
0 likes•217 views
The ALF-S041 is a smoke detector with wired networking capabilities. It has options for power interrupt reset settings and alarm output polarity. The detector uses SMT technology, has a metallic shield for interference protection, and can cover detection areas up to 80 square meters with an operating voltage range of 12-30V DC.
Report
Share
Report
Share
Recommended
W200-50KLB , W200-100KLB
The document summarizes the specifications of an alloy steel multi-column low profile compression load cell, including its main technical data, nonlinearities, hysteresis, creep, input/output resistances, insulation resistance, supply voltage, temperature range, safe overload, cable connection details, IP rating, sizes, capacities, construction material, and applications. It is rated for capacities between 10,000 to 200,000 pounds (5 to 90 metric tonnes) and is constructed from alloy steel, intended for uses like truck, tank, bin and silo weighing.
Original Opto TLP559 P559 DIP-8 New
The TLP559(IGM) is a phototransistor coupler consisting of a GaAlAs LED and photodiode on a single chip. It provides 2500V of isolation in an 8-pin DIP package. The TLP559(IGM) has guaranteed maximum propagation delay times, switching time dispersion, and high common mode transient immunity, making it suitable for isolation interfaces in motor control and other applications.
WQB SERIES
This document summarizes the specifications of an alloy steel shear beam load cell. It lists the main technical specifications including sensitivity, nonlinearity, hysteresis, repeatability, creep, and temperature coefficients. It also provides information on input/output resistance, insulation resistance, supply voltage, temperature range, safe overload, cable connection, and dimensions/capacities. Key features are capacities from 100 to 20,000 pounds (50kg to 10 metric tonnes) and alloy steel construction. Applications include floor and platform scales, tanks, bins and hoppers.
CP-3
This document provides specifications for a high-capacity compression load cell made of stainless steel. It lists the main technical data including a sensitivity of 2.00 mv/v, nonlinearity of ±0.03% FS, and hysteresis and repeatability of 0.02% FS. The load cell has a rated capacity of 30 tonnes and is designed for applications such as weighbridges, hopper and tank weighing, and other large industrial uses.
WST S-TYPE LOAD CELL
This document summarizes the specifications, features, and applications of an alloy steel WST S-type load cell. It lists the main technical data including sensitivity, nonlinearity, hysteresis, creep, zero balance, temperature coefficients, input and output resistances, insulation resistance, supply voltage, temperature compensation range, safe temperature range, safe overload, and cable connection details. Rated capacities are provided for load cells of 50kg, 100kg, and 200kg, which equal to 2.47, 3.46, and 4.23 tonnes respectively. Features include alloy steel construction, and applications include belt conveyor, bin, hopper and crane scales, and tensile testing.
6es7135-4lb02-0ab0
This document provides specifications for the SIMATIC DP electronic module 2 AO U HIGH FEATURE for ET 200S. It has 2 analog outputs with a cycle time of 0.5ms and output ranges of 1-5V, -10V to +10V, and -5V to +5V. Key features include 24V supply voltage, short circuit protection, cable length up to 200m, and 0.01% accuracy. The module has diagnostic LEDs and can operate in an isochronous mode synchronized to the terminal.
Carbon monoxide alarm (co alarm)
This document provides information about the VST-C598IH carbon monoxide alarm, including:
- It has AC/DC power sources, non-radioactive technology, and detects CO at thresholds of 50, 100, and 300 ppm at varying time intervals.
- Features include a quick fix mounting bracket, simple AC connector, battery tamper resistance, interconnectability up to 40 alarms, and LED indicators.
- It has low battery, battery missing, and hush/test functions and automatically resets when CO clears.
Bt136 datasheet
This document provides a product specification for the Philips Semiconductors Triacs BT136 series E sensitive gate triacs. The triacs are intended for use in general purpose bidirectional switching and phase control applications where high sensitivity is required. Key specifications include maximum voltage ratings of 600-800V, RMS on-state current ratings of 4A, and sensitive gate triggering for applications requiring triggering in all four quadrants. Thermal, electrical, and mechanical characteristics are provided.
Recommended
W200-50KLB , W200-100KLB
The document summarizes the specifications of an alloy steel multi-column low profile compression load cell, including its main technical data, nonlinearities, hysteresis, creep, input/output resistances, insulation resistance, supply voltage, temperature range, safe overload, cable connection details, IP rating, sizes, capacities, construction material, and applications. It is rated for capacities between 10,000 to 200,000 pounds (5 to 90 metric tonnes) and is constructed from alloy steel, intended for uses like truck, tank, bin and silo weighing.
Original Opto TLP559 P559 DIP-8 New
The TLP559(IGM) is a phototransistor coupler consisting of a GaAlAs LED and photodiode on a single chip. It provides 2500V of isolation in an 8-pin DIP package. The TLP559(IGM) has guaranteed maximum propagation delay times, switching time dispersion, and high common mode transient immunity, making it suitable for isolation interfaces in motor control and other applications.
WQB SERIES
This document summarizes the specifications of an alloy steel shear beam load cell. It lists the main technical specifications including sensitivity, nonlinearity, hysteresis, repeatability, creep, and temperature coefficients. It also provides information on input/output resistance, insulation resistance, supply voltage, temperature range, safe overload, cable connection, and dimensions/capacities. Key features are capacities from 100 to 20,000 pounds (50kg to 10 metric tonnes) and alloy steel construction. Applications include floor and platform scales, tanks, bins and hoppers.
CP-3
This document provides specifications for a high-capacity compression load cell made of stainless steel. It lists the main technical data including a sensitivity of 2.00 mv/v, nonlinearity of ±0.03% FS, and hysteresis and repeatability of 0.02% FS. The load cell has a rated capacity of 30 tonnes and is designed for applications such as weighbridges, hopper and tank weighing, and other large industrial uses.
WST S-TYPE LOAD CELL
This document summarizes the specifications, features, and applications of an alloy steel WST S-type load cell. It lists the main technical data including sensitivity, nonlinearity, hysteresis, creep, zero balance, temperature coefficients, input and output resistances, insulation resistance, supply voltage, temperature compensation range, safe temperature range, safe overload, and cable connection details. Rated capacities are provided for load cells of 50kg, 100kg, and 200kg, which equal to 2.47, 3.46, and 4.23 tonnes respectively. Features include alloy steel construction, and applications include belt conveyor, bin, hopper and crane scales, and tensile testing.
6es7135-4lb02-0ab0
This document provides specifications for the SIMATIC DP electronic module 2 AO U HIGH FEATURE for ET 200S. It has 2 analog outputs with a cycle time of 0.5ms and output ranges of 1-5V, -10V to +10V, and -5V to +5V. Key features include 24V supply voltage, short circuit protection, cable length up to 200m, and 0.01% accuracy. The module has diagnostic LEDs and can operate in an isochronous mode synchronized to the terminal.
Carbon monoxide alarm (co alarm)
This document provides information about the VST-C598IH carbon monoxide alarm, including:
- It has AC/DC power sources, non-radioactive technology, and detects CO at thresholds of 50, 100, and 300 ppm at varying time intervals.
- Features include a quick fix mounting bracket, simple AC connector, battery tamper resistance, interconnectability up to 40 alarms, and LED indicators.
- It has low battery, battery missing, and hush/test functions and automatically resets when CO clears.
Bt136 datasheet
This document provides a product specification for the Philips Semiconductors Triacs BT136 series E sensitive gate triacs. The triacs are intended for use in general purpose bidirectional switching and phase control applications where high sensitivity is required. Key specifications include maximum voltage ratings of 600-800V, RMS on-state current ratings of 4A, and sensitive gate triggering for applications requiring triggering in all four quadrants. Thermal, electrical, and mechanical characteristics are provided.
Dienhathe.com cam bien-quang_fotek_a3
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Datasheet CaP COL
Pressure-on Connector, for all coaxial cables up to 7 mm diameter. This product is worldwide patented. It is simple and quick, economical, reusable and recyclable, made in Italy, mechanically strong and electronically superior. It is available in 9 different colours.
Passing band: 0 – 6000 MHz
Original Opto PS9151-V-F3-AX 9151 SOP-5 New
This document provides data sheets for the PS9151 high noise reduction photocoupler. It includes specifications for the device such as electrical characteristics, maximum ratings, recommended operating conditions, and usage cautions. The photocoupler contains an LED input and CMOS output integrated circuit designed for high-speed logic interface circuits up to 15 Mbps. It provides high common mode transient immunity and isolation voltage up to 3,750 Vrms.
Dräger PEX 3000 Fixed Gas Detector - Spec Sheet
The document discusses the Dräger PEX 3000 fixed gas detector, which detects flammable gases below their lower explosion limit. It comes in six variants with different measuring ranges and junction box sizes. Installation and calibration are simple, involving connecting cables to spring terminals and using push buttons and a display in the junction box. The detector is approved for explosive gas and dust atmospheres and temperatures from -40°C to +65°C. It reliably detects low gas concentrations down to 10%LEL using special sensors.
DS-00593-14-XTR70020-High-temperature, High Input Voltage, 2A Positive LDO Re...
This document describes the XTR70020 high-temperature, high input voltage, 2A positive LDO regulator from X-REL Semiconductor. Key features include an operating temperature range of -60°C to +230°C, input voltages from 3V to 30V, output voltages from 0.6V to 30V, and high output current of 1A at 230°C with 0.63V dropout or 2A at 230°C with 1.4V dropout. It includes overcurrent protection, thermal shutdown protection, and UVLO protection. Intended applications include automotive, aerospace, downhole tools, and high-efficiency power supplies. The document provides details on the various package and pin options and
Reflective infrared detector ABO-5L Abo 5 l-specification-www.ttbvs.com
The ABO-5L is a reflective infrared detector that can be applied to alert areas near entrances, exits, windows, passages and stairs. It has an integrated transmitter and receiver design that uses lens reflection to simplify wiring while keeping a thin, elegant appearance. The detector has a detection distance of up to 5 meters, uses infrared LEDs, has a response time over 50ms, and can output alarm signals through a dry contact relay that handles 30VAC/DC and 0.5A loads.
16 Channel Actuator -MES-DO 16R
Features:
16 Individual outputs / 8 Shutter Channels
Manual output operation with push button and LED status indicator
10 Scene functionality
Din rail mount assembly
Total data saving on bus failure
Possibility of connecting different phases in different outputs
Programming button
CE Mark
Datasheet tic 226 d
This document provides product information for Power Innovations Limited's TIC226 series silicon triacs. It includes:
- Electrical ratings and characteristics like maximum off-state voltage, on-state current, and trigger parameters.
- Package and pinout details for the TO-220 plastic package.
- Typical characteristic curves showing parameters like trigger current and voltage over temperature.
- Test method diagrams and notes on measurement of parameters like RMS on-state current.
- Important legal notices regarding the product information and warranty.
CMA05MT121 SPEC
This document provides specifications for an electronic component. It includes:
1) Measurements for items A through F in a table with units of mm and tolerances ranging from ±0.1 to ±0.2.
2) Electrical characteristics including insulation resistance of 10MΩ minimum, withstanding voltage of 125V typical, an operating temperature range of -25°C to 85°C, and a rated voltage of 50V typical.
3) Additional specifications for DCR at 100MHz/0.5V of 0.3Ω maximum, and a typical cut-off frequency of 1.0GHz.
Bt139
This document provides product specifications for Philips Semiconductors Triacs BT139 series. The BT139 series are glass passivated triacs in a plastic envelope intended for applications requiring high bidirectional transient blocking voltage and thermal cycling performance such as motor control, lighting, heating, and switching. Key specifications include maximum repetitive peak off-state voltages of 500-800V, RMS on-state current of 16A, and non-repetitive peak on-state current of 140A. The document provides detailed electrical parameters, thermal characteristics, and mechanical dimensions for the BT139 series triacs.
CMA05MT101 SPEC
This document provides specifications for a product including:
1. Electrical characteristics such as a rated voltage of 50V Typ, insulation resistance of 10 MΩ Min, and withstand voltage of 125V Typ.
2. Mechanical dimensions and a marking of "N/A".
3. Performance curves and test frequency of 100 MHz/0.5V.
Bt138 datasheet
This document provides product specifications for Philips Semiconductors Triacs BT138 series. The BT138 series are glass passivated triacs in a plastic envelope intended for applications requiring high bidirectional transient blocking voltage and thermal cycling performance such as motor control, lighting, heating and switching. Key specifications include maximum repetitive peak off-state voltages of 500-800V, RMS on-state current of 12A, non-repetitive peak on-state current of 95A, and thermal resistance of 1.5-2 K/W. The document provides detailed electrical parameters, thermal characteristics, and mechanical dimensions of the BT138 series triacs.
CMA10YT900E SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a rated voltage of 20V and maximum current of 280mA.
2. Mechanical dimensions and a marking of "N/A".
3. Test conditions including a temperature range of -25°C to 85°C.
CMA10YT900D SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a maximum current of 280mA and typical inductance values ranging from 1.0 to 1.2μH.
2. Mechanical dimensions and test conditions including a rated voltage of 20V and operating temperature range of -25 to 85 degrees Celsius.
3. Identification information like the part number, manufacturer contact information, and date code for quality approval.
CMA10YT750D SPEC
This document provides specifications for a product including:
1. Electrical characteristics such as a rated voltage of 20V Typ, a DCR of 0.4Ω Max, and a cut-off frequency of 7.5 GHz Typ.
2. Current characteristics such as a maximum current of 300 mA.
3. Mechanical dimensions and other item specifications.
MAN0824-01
This document provides specifications and installation instructions for the HEXE1MM and HEXE1MM-53 motor monitors. Key specifications include:
- The modules have 4 digital DC inputs, 4 current transformer inputs, 1 PTC input, and 4 relay outputs.
- The digital inputs accept ±12/24VDC, current inputs include options for 0-5A, 0-100mA, and 0-1A, and relay outputs are rated for 3A at 230VAC.
- Installation instructions include wiring diagrams, I/O register mapping, and derating charts for relay life expectancy based on load current.
- Safety precautions are provided and technical support contact information is listed.
CMA05YT900D SPEC
1. The document provides specifications for an electronic component including its electrical characteristics, mechanical dimensions, and markings.
2. Key specifications include an impedance of 90Ω ±25% at 100MHz, a maximum DCR of 0.3Ω, and operating temperatures between -25°C to 85°C.
3. The frequency response graph shows the component has an impedance of 90Ω ±25% from 1MHz to 1000MHz.
CMA10YT600D SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a maximum current of 300mA and typical inductance values ranging from 1.2uH to 1.0uH.
2. Mechanical dimensions and allowed tolerances.
3. Testing requirements such as a rated operational temperature range of -25°C to 85°C.
4. Manufacturing details like markings and manufacturer contact information.
CMA05YT900E SPEC
The document provides specifications for an approved sample including:
1. Electrical characteristics with typical and maximum values for impedance, DCR, cutoff frequency, and current.
2. Mechanical dimensions in millimeters for 5 items labeled A through E.
3. Testing conditions including rated voltage, operating temperature range, and minimum insulation resistance.
Htc oscilloscope htc 5030
The HTC-5030 oscilloscope has a sensitivity of up to 1mV/div and features full band trigger auto sweep circuit. It allows flex trig mode to select signals from CH1, CH2 or an external source. The oscilloscope has a bandwidth of 10Hz to 30MHz, can display signals from 5mV/div to 20V/div, and has a rise time of less than 18ns. It comes with power chord, two 20MHz probes, and a manual.
Smoke Detector Guidelines Cityof San Jose
Smoke detectors are required in dwelling units, congregate residences, and hotel or lodging guest rooms used for sleeping. Detectors must be installed according to California building code and manufacturer instructions, and sound an alarm audible in all sleeping areas. Smoke detectors are required for new construction, additions over $1,000, or when sleeping rooms are added to existing units. Detectors must be installed in each story, basement, and sleeping room, as well as centrally located areas giving access to bedrooms. New construction requires hardwired detectors with battery backup that signal when batteries are low, while existing buildings may have solely battery-operated detectors.
More Related Content
What's hot
Dienhathe.com cam bien-quang_fotek_a3
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Datasheet CaP COL
Pressure-on Connector, for all coaxial cables up to 7 mm diameter. This product is worldwide patented. It is simple and quick, economical, reusable and recyclable, made in Italy, mechanically strong and electronically superior. It is available in 9 different colours.
Passing band: 0 – 6000 MHz
Original Opto PS9151-V-F3-AX 9151 SOP-5 New
This document provides data sheets for the PS9151 high noise reduction photocoupler. It includes specifications for the device such as electrical characteristics, maximum ratings, recommended operating conditions, and usage cautions. The photocoupler contains an LED input and CMOS output integrated circuit designed for high-speed logic interface circuits up to 15 Mbps. It provides high common mode transient immunity and isolation voltage up to 3,750 Vrms.
Dräger PEX 3000 Fixed Gas Detector - Spec Sheet
The document discusses the Dräger PEX 3000 fixed gas detector, which detects flammable gases below their lower explosion limit. It comes in six variants with different measuring ranges and junction box sizes. Installation and calibration are simple, involving connecting cables to spring terminals and using push buttons and a display in the junction box. The detector is approved for explosive gas and dust atmospheres and temperatures from -40°C to +65°C. It reliably detects low gas concentrations down to 10%LEL using special sensors.
DS-00593-14-XTR70020-High-temperature, High Input Voltage, 2A Positive LDO Re...
This document describes the XTR70020 high-temperature, high input voltage, 2A positive LDO regulator from X-REL Semiconductor. Key features include an operating temperature range of -60°C to +230°C, input voltages from 3V to 30V, output voltages from 0.6V to 30V, and high output current of 1A at 230°C with 0.63V dropout or 2A at 230°C with 1.4V dropout. It includes overcurrent protection, thermal shutdown protection, and UVLO protection. Intended applications include automotive, aerospace, downhole tools, and high-efficiency power supplies. The document provides details on the various package and pin options and
Reflective infrared detector ABO-5L Abo 5 l-specification-www.ttbvs.com
The ABO-5L is a reflective infrared detector that can be applied to alert areas near entrances, exits, windows, passages and stairs. It has an integrated transmitter and receiver design that uses lens reflection to simplify wiring while keeping a thin, elegant appearance. The detector has a detection distance of up to 5 meters, uses infrared LEDs, has a response time over 50ms, and can output alarm signals through a dry contact relay that handles 30VAC/DC and 0.5A loads.
16 Channel Actuator -MES-DO 16R
Features:
16 Individual outputs / 8 Shutter Channels
Manual output operation with push button and LED status indicator
10 Scene functionality
Din rail mount assembly
Total data saving on bus failure
Possibility of connecting different phases in different outputs
Programming button
CE Mark
Datasheet tic 226 d
This document provides product information for Power Innovations Limited's TIC226 series silicon triacs. It includes:
- Electrical ratings and characteristics like maximum off-state voltage, on-state current, and trigger parameters.
- Package and pinout details for the TO-220 plastic package.
- Typical characteristic curves showing parameters like trigger current and voltage over temperature.
- Test method diagrams and notes on measurement of parameters like RMS on-state current.
- Important legal notices regarding the product information and warranty.
CMA05MT121 SPEC
This document provides specifications for an electronic component. It includes:
1) Measurements for items A through F in a table with units of mm and tolerances ranging from ±0.1 to ±0.2.
2) Electrical characteristics including insulation resistance of 10MΩ minimum, withstanding voltage of 125V typical, an operating temperature range of -25°C to 85°C, and a rated voltage of 50V typical.
3) Additional specifications for DCR at 100MHz/0.5V of 0.3Ω maximum, and a typical cut-off frequency of 1.0GHz.
Bt139
This document provides product specifications for Philips Semiconductors Triacs BT139 series. The BT139 series are glass passivated triacs in a plastic envelope intended for applications requiring high bidirectional transient blocking voltage and thermal cycling performance such as motor control, lighting, heating, and switching. Key specifications include maximum repetitive peak off-state voltages of 500-800V, RMS on-state current of 16A, and non-repetitive peak on-state current of 140A. The document provides detailed electrical parameters, thermal characteristics, and mechanical dimensions for the BT139 series triacs.
CMA05MT101 SPEC
This document provides specifications for a product including:
1. Electrical characteristics such as a rated voltage of 50V Typ, insulation resistance of 10 MΩ Min, and withstand voltage of 125V Typ.
2. Mechanical dimensions and a marking of "N/A".
3. Performance curves and test frequency of 100 MHz/0.5V.
Bt138 datasheet
This document provides product specifications for Philips Semiconductors Triacs BT138 series. The BT138 series are glass passivated triacs in a plastic envelope intended for applications requiring high bidirectional transient blocking voltage and thermal cycling performance such as motor control, lighting, heating and switching. Key specifications include maximum repetitive peak off-state voltages of 500-800V, RMS on-state current of 12A, non-repetitive peak on-state current of 95A, and thermal resistance of 1.5-2 K/W. The document provides detailed electrical parameters, thermal characteristics, and mechanical dimensions of the BT138 series triacs.
CMA10YT900E SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a rated voltage of 20V and maximum current of 280mA.
2. Mechanical dimensions and a marking of "N/A".
3. Test conditions including a temperature range of -25°C to 85°C.
CMA10YT900D SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a maximum current of 280mA and typical inductance values ranging from 1.0 to 1.2μH.
2. Mechanical dimensions and test conditions including a rated voltage of 20V and operating temperature range of -25 to 85 degrees Celsius.
3. Identification information like the part number, manufacturer contact information, and date code for quality approval.
CMA10YT750D SPEC
This document provides specifications for a product including:
1. Electrical characteristics such as a rated voltage of 20V Typ, a DCR of 0.4Ω Max, and a cut-off frequency of 7.5 GHz Typ.
2. Current characteristics such as a maximum current of 300 mA.
3. Mechanical dimensions and other item specifications.
MAN0824-01
This document provides specifications and installation instructions for the HEXE1MM and HEXE1MM-53 motor monitors. Key specifications include:
- The modules have 4 digital DC inputs, 4 current transformer inputs, 1 PTC input, and 4 relay outputs.
- The digital inputs accept ±12/24VDC, current inputs include options for 0-5A, 0-100mA, and 0-1A, and relay outputs are rated for 3A at 230VAC.
- Installation instructions include wiring diagrams, I/O register mapping, and derating charts for relay life expectancy based on load current.
- Safety precautions are provided and technical support contact information is listed.
CMA05YT900D SPEC
1. The document provides specifications for an electronic component including its electrical characteristics, mechanical dimensions, and markings.
2. Key specifications include an impedance of 90Ω ±25% at 100MHz, a maximum DCR of 0.3Ω, and operating temperatures between -25°C to 85°C.
3. The frequency response graph shows the component has an impedance of 90Ω ±25% from 1MHz to 1000MHz.
CMA10YT600D SPEC
This document provides specifications for an electronic component including:
1. Electrical characteristics such as a maximum current of 300mA and typical inductance values ranging from 1.2uH to 1.0uH.
2. Mechanical dimensions and allowed tolerances.
3. Testing requirements such as a rated operational temperature range of -25°C to 85°C.
4. Manufacturing details like markings and manufacturer contact information.
CMA05YT900E SPEC
The document provides specifications for an approved sample including:
1. Electrical characteristics with typical and maximum values for impedance, DCR, cutoff frequency, and current.
2. Mechanical dimensions in millimeters for 5 items labeled A through E.
3. Testing conditions including rated voltage, operating temperature range, and minimum insulation resistance.
Htc oscilloscope htc 5030
The HTC-5030 oscilloscope has a sensitivity of up to 1mV/div and features full band trigger auto sweep circuit. It allows flex trig mode to select signals from CH1, CH2 or an external source. The oscilloscope has a bandwidth of 10Hz to 30MHz, can display signals from 5mV/div to 20V/div, and has a rise time of less than 18ns. It comes with power chord, two 20MHz probes, and a manual.
What's hot (20)
DS-00593-14-XTR70020-High-temperature, High Input Voltage, 2A Positive LDO Re...
DS-00593-14-XTR70020-High-temperature, High Input Voltage, 2A Positive LDO Re...
Reflective infrared detector ABO-5L Abo 5 l-specification-www.ttbvs.com
Reflective infrared detector ABO-5L Abo 5 l-specification-www.ttbvs.com
Viewers also liked
Smoke Detector Guidelines Cityof San Jose
Smoke detectors are required in dwelling units, congregate residences, and hotel or lodging guest rooms used for sleeping. Detectors must be installed according to California building code and manufacturer instructions, and sound an alarm audible in all sleeping areas. Smoke detectors are required for new construction, additions over $1,000, or when sleeping rooms are added to existing units. Detectors must be installed in each story, basement, and sleeping room, as well as centrally located areas giving access to bedrooms. New construction requires hardwired detectors with battery backup that signal when batteries are low, while existing buildings may have solely battery-operated detectors.
Manuel Détecteur de fumée Everspring SF812
The document provides information about including or excluding a smoke detector from a Z-Wave network. It describes:
1) Inside the detector is a link key used for inclusion, exclusion, association, and reset. When first powered, it flashes to indicate it has no node ID.
2) The detector can be included in any Z-Wave network and act as a repeater. Inclusion allows remote operation when the detector is triggered.
3) The basic Z-Wave functions like inclusion, exclusion, association, and reset are described along with the actions and LED indicators for each function.
Bunting 1 rev3 smoke detector
Protech Integrated Engineering Sdn. Bhd. is an engineering firm located in Kuala Lumpur, Malaysia that specializes in fire engineering, technology, and solutions. It provides contact information including an email, website, phone number, and fax. The document also explains that all smoke detectors have two basic parts - a sensor to detect smoke and an electronic horn to alert people, and that they can run on either 9-volt batteries or 120-volt house current.
Smoke detector
Smoke detectors are important for safety in CLUs. If a permanent smoke detector is not installed, contact Work Control Center at DSN 824-COLD. Temporary detectors can be found on top of metal lockers, while permanent detectors are attached to the roof with an electrical connection.
PoPP Smoke detector-siren_English
The smoke detector Z-Wave detects fire and smoke emissions. In case of emergency, it gives an audible alert and sends an alarm signal to the Z-Wave network
Smoke Detector Fibaro certified CE EN 14604
1) The document provides instructions for replacing the battery in a Fibaro Smoke Sensor smoke detector. It describes detaching the sensor from its cover, removing the old battery, inserting a new battery while observing polarity, and reattaching the sensor to the cover.
2) The Fibaro Smoke Sensor is an optical smoke detector that detects smoke and sends alarm signals via sound, light, and Z-Wave commands. It can also monitor temperature and send warnings if thresholds are exceeded.
3) The instructions describe testing the sensor after battery replacement by performing a self-test where the sensor checks its operation and signals via light and sound.
Smoke detector
This document summarizes different types of fire detection and alarm systems. It describes the main controller as the brain of the system that provides power and monitoring. Smoke detectors are then discussed, including ionization and photoelectric detectors. Ionization detectors use radioactive materials to detect invisible smoke particles, while photoelectric detectors use light scattering to detect visible smoke. Beam detectors can cover large areas by detecting smoke blocking a light beam. Both detector types have advantages and disadvantages, so using both is recommended for maximum fire detection coverage.
Viewers also liked (8)
More from TTBVS
Rd 820 b-specification-www.ttbvs.com
The RD-820B is a watch style two-way radio that features flexible talk functionality and a unique watch design. It has multiple frequency options and 38 CTCSS and 83 DCS sub-channels. The radio has a 0.5W output power and 8km range, with features like a scrambler, compander, 1.2 inch LCD screen, digital clock, and VOX function. It is powered by a 3.7V, 650mAh lithium-ion battery with a 3 day standby time and comes in black, pink, light green, and light blue colors.
Rd 118-specification-www.ttbvs.com
The RD-118 is a watch-style two-way radio with adjustable watch band that features multi-frequency capabilities, up to 6 km range, auto-squelch, battery saving mode, hands-free VOX function, channel scan, 12-hour digital clock, 3-day standby time, backlit LCD display, operation on 3 AAA batteries, and inclusion of two earphones and user manual. It has a power output of 0.5 watts and uses 3 AAA batteries with a range of up to 8 km in open areas.
Rd 018 b-specification-www.ttbvs.com
The RD-018B is a watch style two-way radio that features:
1. A unique watch design and multi-frequency options between 409-476 MHz.
2. A 0.5W output power and range of up to 8km.
3. An LCD screen, digital clock, and VOX, scan, and power saving functions.
4. It operates on a 3.7V 650mAh lithium-ion battery and has a standby time of 3 days.
R9 b10&20r specification-www.ttbvs.com
This document summarizes the features of the R9B10/20R handheld walkie talkie. It has multi-frequency options, 38 CTCSS and 83 DCS sub-channels, a transmission power of 1-2 watts, and a communication range of 18-20 kilometers. It also offers channel scanning, duplex communication, a backlit display, dual channel monitoring, and auto-squelch among other features.
F 668-specification-www.ttbvs.com
This document describes the features and specifications of a handheld two-way radio model F-668. It has PMR/FRS/GMRS operating frequencies, uses 3 AA batteries, has a backlit LCD display showing channel, volume, and battery levels. It has a flexible rubber antenna, ear/mic jack, auto power save, call tones, channel locking, and can be charged via DC jack. Its power output is 0.5W/2W and range is 3-8 km in open areas.
F 667-specification-www.ttbvs.com
This document summarizes the features and specifications of a handheld two-way radio model F-667. It operates on PMR/FRS/GMRS frequencies, uses 3 AA batteries, and has a backlit LCD displaying channel, volume, battery level and transmit/receive status. Additional features include a flexible rubber antenna, earpiece/mic jack, auto power save, call tones, channel locking, and a DC jack for battery charging. Its power output is 0.5W/2W and range is 3-8 kilometers in open areas when using 3 AA batteries.
H320 battery specification-www.ttbvs.com
This document describes an H320 battery with a capacity of 2050mAh. It is a lithium-ion battery compatible with H320 adapters, has a nominal voltage of 7.2V, and provides around 15 hours of working time. The battery works between temperatures of -20 to 60 degrees Celsius when discharging and 0 to 45 degrees when charging, and can be stored at temperatures ranging from -20 to 60 degrees Celsius for a month, -20 to 45 degrees for three months, and -20 to 25 degrees for a year.
H280 specification-www.ttbvs.com
The document summarizes the specifications and features of the H280 portable two-way radio. It lists the following key features: supports military standard MIL-STD-810 for durability, IP54 water and dust resistance rating, 1300mAh high capacity battery providing over 11 hours of use, and 16 channel capacity. The radio has a frequency range of 136-480MHz, supports 25/12.5KHz channel spacing, and has a transmit power output of 4W/2W depending on frequency band. It is 102mmx51.5mmx28.5mm in size and weighs 220g with antenna and battery installed.
H280&290 battery specification-www.ttbvs.com
This document provides information about an H280/290 battery that has a capacity of 1300mAh and is a Li-lon battery type. It is designed for use with H280 adapters and has a nominal voltage of 7.2V. The battery is specified to have a working time of around 11 hours, and can be charged between 0-45°C and discharged between -20-60°C.
Cli h350 a-specification-www.ttbvs.com
The CLI-H350A is a battery charger that can charge Li-Ion, Li-polymer, Ni-MH, and Ni-Cd batteries. It has an input of 12VDC 1A, output of 500mA, and operates between 0-40°C. The charger is model CLI-H350A and is made by TTBvision.
Cli h280-specification-www.ttbvs.com
This document provides specifications for the CLI-H280, a two-way radio battery charger. The charger has an input of 12VDC 1A and output of 500mA, and operates between 0-40°C. It is adapter type H280 according to the manufacturer TTBVision.
W2055 specification-www.ttbvs.com
This document provides specifications for a 54Mbps Realtek 8187L 10dBi High Gain Long Range Wireless USB Adapter receiver (model W2055). It supports IEEE 802.11b, IEEE 802.11g, and IEEE 802.11n standards with a maximum data transfer rate of 150Mbps. It has a USB 2.0 interface, operates in the 2.4-2.4835GHz frequency range, and supports security protocols including WEP, WPA, WPA2, and WPA-PSK/WPA2-PSK (TKIP/AES). It includes a 10dBi omni-directional antenna and has a operating range of up to 2000 meters depending on the
N4000 specification-www.ttbvs.com
This document summarizes the specifications of the N4000 wifi receiver. It uses a Ralink 3070 chipset and supports 802.11n, g, and b wireless standards. It has a high power output of 2000mW and supports transmission rates up to 150Mbps. It has a 36dBi omni-directional antenna and can receive signals from up to 1.5km away.
N3000 specification-www.ttbvs.com
The document describes a WiFi USB adapter with the model number N3000. It has a high power of 3000mW and uses a 2.4GHz frequency band with an 11dBi detachable antenna. It supports transfer rates up to 150Mbps and uses the IEEE 802.11b/g/n wireless standards with the Ralink 3070 chipset. It has various security features and is compatible with Windows, Linux, and Mac operating systems.
N918 specification-www.ttbvs.com
This document summarizes the features and specifications of a Realtek 8188RU 36dBi Wifi Antenna & Wireless USB Adapter with USB Wifi Dongle N918. It supports standards including IEEE 802.11n, IEEE 802.11g, and IEEE 802.11b with data transfer rates up to 150Mbps. It has a USB 2.0 interface, operates in the 2.4-2.4835GHz frequency range, and supports security protocols including WEP, WPA, and WPA2.
N828 specification-www.ttbvs.com
The document describes the specifications and features of the N828 wireless access point. It can operate at speeds up to 300Mbps with a wireless range of up to 3km. It supports various wireless security protocols and can operate in different modes including AP, router, bridge, gateway, and repeater. It has ports for WAN, LAN, and power, and supports PoE power supply.
M15 specification-www.ttbvs.com
The M15 is a mini USB WiFi adapter that supports the IEEE 802.11n, 802.11g, and 802.11b wireless standards. It has a maximum transfer rate of 150Mbps and supports security protocols like WEP, WPA, and WPA2. Measuring 18.3*40.5*4.9mm, the M15 uses an internal omni-directional antenna and connects to devices via a USB 2.0 interface.
Pw 5350-1 a-specification-www.ttbvs.com
This document summarizes the specifications of the PW-5350-1A wireless router/AP module. It supports both wired and wireless connections with a maximum wireless transmission rate of 150Mbps. It uses the Ralink RT5350 chipset and has external/internal antenna options. It complies with IEEE 802.11b, 802.11g, and 802.11n wireless standards and has a working temperature range of -0°C to 40°C.
Kj r8192 rx6-specification-www.ttbvs.com
The document summarizes the specifications of the KJ-R8192RX6 300M Wireless N USB Module. It supports IEEE 802.11n, 802.11g, and 802.11b protocols and has a USB 2.0 interface. It operates in the 2.4-2.4835GHz frequency range across 1-11 channels and uses OFDM, DBPSK, DQPSK, and CCK data modulation. The module supports infrastructure and ad-hoc working modes with a transmitting rate ranging from 1-135Mbps and has a sensitivity of -76dBm at 135Mbps. It has an indoor transmission distance of up to 100m and outdoor distance of up to 300m.
More from TTBVS (20)
Recently uploaded
The latest Heat Pump Manual from Newentide
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night TIMES BPO: Business Plan For Startup Industry
Starting a business is like embarking on an unpredictable adventure. It’s a journey filled with highs and lows, victories and defeats. But what if I told you that those setbacks and failures could be the very stepping stones that lead you to fortune? Let’s explore how resilience, adaptability, and strategic thinking can transform adversity into opportunity.
The Genesis of BriansClub.cm Famous Dark WEb Platform
BriansClub.cm, a famous platform on the dark web, has become one of the most infamous carding marketplaces, specializing in the sale of stolen credit card data.
Industrial Tech SW: Category Renewal and Creation
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Top 10 Free Accounting and Bookkeeping Apps for Small Businesses
Maintaining a proper record of your money is important for any business whether it is small or large. It helps you stay one step ahead in the financial race and be aware of your earnings and any tax obligations.
However, managing finances without an entire accounting staff can be challenging for small businesses.
Accounting apps can help with that! They resemble your private money manager.
They organize all of your transactions automatically as soon as you link them to your corporate bank account. Additionally, they are compatible with your phone, allowing you to monitor your finances from anywhere. Cool, right?
Thus, we’ll be looking at several fantastic accounting apps in this blog that will help you develop your business and save time.
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS一比一原版(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证文凭如何办理
永久可查学历认证【微信：A575476】【(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambarDearbornMusic-KatherineJasperFullSailUni
My powerpoint presentation for my Music Retail and Distribution class at Full Sail University
Income Tax exemption for Start up : Section 80 IAC
A presentation on the concept of Exemption of Profits of Start ups from Income Tax
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
Nathalie zal delen hoe DEI en ESG een fundamentele rol kunnen spelen in je merkstrategie en je de juiste aansluiting kan creëren met je doelgroep. Door middel van voorbeelden en simpele handvatten toont ze hoe dit in jouw organisatie toegepast kan worden.
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
On episode 272 of the Digital and Social Media Sports Podcast, Neil chatted with Brian Fitzsimmons, Director of Licensing and Business Development for Barstool Sports.
What follows is a collection of snippets from the podcast. To hear the full interview and more, check out the podcast on all podcast platforms and at www.dsmsports.net
Best Forex Brokers Comparison in INDIA 2024
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Profiles of Iconic Fashion Personalities.pdf
The fashion industry is dynamic and ever-changing, continuously sculpted by trailblazing visionaries who challenge norms and redefine beauty. This document delves into the profiles of some of the most iconic fashion personalities whose impact has left a lasting impression on the industry. From timeless designers to modern-day influencers, each individual has uniquely woven their thread into the rich fabric of fashion history, contributing to its ongoing evolution.
Top mailing list providers in the USA.pptx
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Recently uploaded (20)
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
The Genesis of BriansClub.cm Famous Dark WEb Platform
The Genesis of BriansClub.cm Famous Dark WEb Platform
Top 10 Free Accounting and Bookkeeping Apps for Small Businesses
Top 10 Free Accounting and Bookkeeping Apps for Small Businesses
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Income Tax exemption for Start up : Section 80 IAC
Income Tax exemption for Start up : Section 80 IAC
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Alarm System/Independent Smoke Detector/ Smoke Sensor with Wired networking ALF-S041 Alf s041-specification-www.ttbvs.com
- 1. ALF-S041 (产品型号展示优化词：Alarm System/Independent Smoke Detector/ Smoke Sensor with Wired networking ALF-S041) Description: ◆Power interrupt reset / automatic reset optional ◆Non-polarity power input ◆Alarm indication:red LED on ◆Alarm output NO / NC optional ◆SMT technology, strong stability ◆Metallic shield, good anti- interference(20v/m-1GHz) Specification: ◆ Operating voltage: DC 12-30V ◆ Operating temperature: -10 to +50℃ ℃ ◆ Operating Humidity:≤95% RH ◆ Detection area: 80 m2 ◆ Size: Φ103*53mm (with base) www.ttbvision.com