This document describes the XTR70020 high-temperature, high input voltage, 2A positive LDO regulator from X-REL Semiconductor. Key features include an operating temperature range of -60°C to +230°C, input voltages from 3V to 30V, output voltages from 0.6V to 30V, and high output current of 1A at 230°C with 0.63V dropout or 2A at 230°C with 1.4V dropout. It includes overcurrent protection, thermal shutdown protection, and UVLO protection. Intended applications include automotive, aerospace, downhole tools, and high-efficiency power supplies. The document provides details on the various package and pin options and
ANAVIEW's Smallest Class D OEM Amplifier BoardHTCS LLC
The Credit Card Size, DC powered (10VDC to 20VDC) Class-D amp is the ideal solution for battery powered PA systems. 2x45 Watts RMS into 6 Ohms and it has very low THD in the Audio frequency band.
The AL5809 is a constant current linear LED driver that provides a cost-effective two pin solution for driving LEDs. It has excellent temperature stability of 20ppm/°C and regulates current to ±5% over a wide voltage and temperature range. It is available with various fixed output currents and supports both high-side and low-side driving of LED chains from 2.5V to 60V. It can linearly drive long strings of LEDs and includes features such as a wide operating temperature range, high power supply rejection ratio, and RoHS compliance.
This document provides product specifications for the IRFZ44N N-channel enhancement mode trench transistor from Philips Semiconductors. The transistor features very low on-state resistance of 22 mOhms and is intended for use in switched mode power supplies and general purpose switching applications. Key specifications include a maximum drain-source voltage of 55V, drain current of 49A, and junction temperature range of -55°C to 175°C. The document provides detailed electrical characteristics, thermal properties, and mechanical dimensions of the device.
XLSEMI XL140 2A 380KHz 18V Buck DC to DC Converterdegarden
The XL1410 is a 380KHz fixed frequency buck converter capable of supplying 2A loads from 3.6V to 18V input voltages. It requires few external components and has high efficiency, low ripple, and excellent line and load regulation. Key features include adjustable output from 1.222V to 16V, 100% maximum duty cycle, internal MOSFET, and protections such as overcurrent, short circuit, and thermal shutdown. It is available in an 8-pin SOP package.
The document provides information about the BA4510xxx series of low noise operational amplifiers from ROHM, including:
- They are dual operational amplifiers with high gain, low input referred noise voltage, and low distortion, making them suitable for audio applications.
- They have a wide operating supply voltage range of ±1.0V to ±3.5V and an operating temperature range of -20°C to +75°C.
- They are available in SOP8, SSOP-B8, TSSOP-B8, and MSOP8 packages and can be ordered with part numbers like BA4510F, BA4510FV, etc. depending on the package type
The NCP1032 is an integrated circuit that can be used to implement switching regulator applications with minimal external components. It contains all the active power control logic and protection circuitry needed, including an on-chip high voltage power switch, startup circuit, fixed frequency oscillator up to 1 MHz, and current limit, soft start, and thermal protection features. It is well-suited for applications requiring up to 3W output in isolated power supplies for telecom and medical equipment.
This technical data sheet provides specifications and performance details for the UCI224E industrial generator. Some key points:
- The generator meets various international standards for windings, voltage regulation, and other electrical performance. Windings are wound in a two-thirds pitch to eliminate harmonics.
- Several automatic voltage regulator (AVR) options are available to provide voltage regulation, including separately excited and self-excited systems.
- Terminals and a terminal box allow for customer wiring. The generator is designed for low vibration and balanced rotor.
- Efficiency and performance curves are provided showing voltage regulation, efficiency at varying loads, and short circuit characteristics.
- Ratings are provided for continuous duty
ANAVIEW's Smallest Class D OEM Amplifier BoardHTCS LLC
The Credit Card Size, DC powered (10VDC to 20VDC) Class-D amp is the ideal solution for battery powered PA systems. 2x45 Watts RMS into 6 Ohms and it has very low THD in the Audio frequency band.
The AL5809 is a constant current linear LED driver that provides a cost-effective two pin solution for driving LEDs. It has excellent temperature stability of 20ppm/°C and regulates current to ±5% over a wide voltage and temperature range. It is available with various fixed output currents and supports both high-side and low-side driving of LED chains from 2.5V to 60V. It can linearly drive long strings of LEDs and includes features such as a wide operating temperature range, high power supply rejection ratio, and RoHS compliance.
This document provides product specifications for the IRFZ44N N-channel enhancement mode trench transistor from Philips Semiconductors. The transistor features very low on-state resistance of 22 mOhms and is intended for use in switched mode power supplies and general purpose switching applications. Key specifications include a maximum drain-source voltage of 55V, drain current of 49A, and junction temperature range of -55°C to 175°C. The document provides detailed electrical characteristics, thermal properties, and mechanical dimensions of the device.
XLSEMI XL140 2A 380KHz 18V Buck DC to DC Converterdegarden
The XL1410 is a 380KHz fixed frequency buck converter capable of supplying 2A loads from 3.6V to 18V input voltages. It requires few external components and has high efficiency, low ripple, and excellent line and load regulation. Key features include adjustable output from 1.222V to 16V, 100% maximum duty cycle, internal MOSFET, and protections such as overcurrent, short circuit, and thermal shutdown. It is available in an 8-pin SOP package.
The document provides information about the BA4510xxx series of low noise operational amplifiers from ROHM, including:
- They are dual operational amplifiers with high gain, low input referred noise voltage, and low distortion, making them suitable for audio applications.
- They have a wide operating supply voltage range of ±1.0V to ±3.5V and an operating temperature range of -20°C to +75°C.
- They are available in SOP8, SSOP-B8, TSSOP-B8, and MSOP8 packages and can be ordered with part numbers like BA4510F, BA4510FV, etc. depending on the package type
The NCP1032 is an integrated circuit that can be used to implement switching regulator applications with minimal external components. It contains all the active power control logic and protection circuitry needed, including an on-chip high voltage power switch, startup circuit, fixed frequency oscillator up to 1 MHz, and current limit, soft start, and thermal protection features. It is well-suited for applications requiring up to 3W output in isolated power supplies for telecom and medical equipment.
This technical data sheet provides specifications and performance details for the UCI224E industrial generator. Some key points:
- The generator meets various international standards for windings, voltage regulation, and other electrical performance. Windings are wound in a two-thirds pitch to eliminate harmonics.
- Several automatic voltage regulator (AVR) options are available to provide voltage regulation, including separately excited and self-excited systems.
- Terminals and a terminal box allow for customer wiring. The generator is designed for low vibration and balanced rotor.
- Efficiency and performance curves are provided showing voltage regulation, efficiency at varying loads, and short circuit characteristics.
- Ratings are provided for continuous duty
For more information, please feel free to visit the site at the following link: http://www.kynix.com/Detail/6239/IL711T-1E.html. You can choose Kynix as the first place and you can feel free to buy what you need in Kynix at the lower prices.
The μA741 is a general-purpose operational amplifier featuring offset-voltage null capability. It has a high common-mode input voltage range, short-circuit protection, and stability without external components. The μA741 is available in various package options and is characterized for operation over different temperature ranges depending on the specific part number.
This document provides data sheets for the PS9151 high noise reduction photocoupler. It includes specifications for the device such as electrical characteristics, maximum ratings, recommended operating conditions, and usage cautions. The photocoupler contains an LED input and CMOS output integrated circuit designed for high-speed logic interface circuits up to 15 Mbps. It provides high common mode transient immunity and isolation voltage up to 3,750 Vrms.
This technical data sheet provides specifications and options for an industrial generator. It includes:
1) Details on the voltage regulators, windings, terminals, shaft, insulation, and quality assurance.
2) Ratings for the generator including voltage configurations, kVA ratings, efficiencies, and reactance values.
3) Curves showing efficiency, locked rotor starting, and short circuit performance.
This document provides information on the MX341 Automatic Voltage Regulator (AVR) including:
- A general description of the AVR and how it regulates generator output voltage.
- Technical specifications for the AVR including voltage and current ratings, regulation accuracy, response times, and environmental tolerances.
- A diagram showing the main functions of the AVR which include voltage sensing, reference voltage generation, low frequency detection, and power control of the exciter field.
- Notes on features such as the external voltage adjustment, under frequency protection, analog input, and quadrature droop input.
This document is a datasheet for the TD1410, a 380KHz fixed frequency monolithic step down switch mode regulator with a built in internal Power MOSFET capable of delivering 2A of continuous output current over a wide input voltage range. The datasheet provides details on the device including electrical specifications, typical application circuits, thermal considerations, and function descriptions of the various pins. It is intended to provide engineers with the necessary information to properly utilize the TD1410 in their circuit designs.
INCHANGE Semiconductor produces isc Thyristors 5P4M for applications such as motor speed control, temperature control, constant voltage power sources, battery chargers, and automotive regulators. The product has an absolute maximum repetitive peak off-state voltage of 400V and on-state current of 5A at 103°C case temperature. It has a junction to case thermal resistance of 3°C/W.
This document provides information on optocouplers (IL4116/IL4117/IL4118) that have a phototriac output, zero crossing detection, and very low input current. The optocouplers consist of an LED optically coupled to a photosensitive zero crossing TRIAC network and can isolate low voltage logic from 120/240/380VAC lines. They feature high input sensitivity down to 1.3mA, zero voltage crossing operation, blocking voltages up to 800V, and on-state currents up to 300mA. The optocouplers can control loads such as motors, solenoids, thyristors and relays in applications including solid state relays,
The FOD3150 is a high noise immunity, 1.0A output current gate drive optocoupler capable of driving IGBTs and power MOSFETs. It has a propagation delay of 500ns max and provides isolation of 5000VRMS. Key features include high common mode rejection ratio, wide supply voltage range of 15-30V, and an operating temperature range of -40°C to 100°C. It is well suited for applications such as industrial inverters, UPS systems, induction heating, and isolated gate drives.
The LM124/SA534/LM2902 series consists of four independent, high-gain, internally frequency-compensated operational amplifiers designed specifically to operate from a single power supply over a wide range of voltages.
This document provides specifications for TE Connectivity's slimline PCN and PCNH series general purpose low power PCB relays. The PCN relay has a 1 pole 5A normally open contact, operates at 120mW, and is only 5mm wide, allowing for high packing density. The PCNH has a single contact and higher performance 180mW coil. Both comply with RoHS and offer cadmium-free contacts. The document provides detailed contact, coil, insulation, mechanical, and other technical data for the relays.
This document provides a macromodel for the MC33078 dual operational amplifier. The macromodel code is provided which models the input stage, amplifying stage, and output stage of the operational amplifier. Electrical characteristics obtained from simulations using the macromodel are also listed, including voltage gain, supply current, input common mode voltage range, and other key parameters.
This document provides specifications and installation instructions for the HEXE1MM and HEXE1MM-53 motor monitors. Key specifications include:
- The modules have 4 digital DC inputs, 4 current transformer inputs, 1 PTC input, and 4 relay outputs.
- The digital inputs accept ±12/24VDC, current inputs include options for 0-5A, 0-100mA, and 0-1A, and relay outputs are rated for 3A at 230VAC.
- Installation instructions include wiring diagrams, I/O register mapping, and derating charts for relay life expectancy based on load current.
- Safety precautions are provided and technical support contact information is listed.
The document summarizes the specifications and performance of the FMA219 X-band LNA MMIC. Key points:
- It is a 2-stage pHEMT low-noise amplifier operating from 7-11 GHz with a noise figure of 1.5 dB, small signal gain of 21 dB, and output power of 12 dBm.
- Typical applications include use as a low-noise front end amplifier or general gain block in X-band systems.
- Electrical specifications and performance curves are provided showing the amplifier's gain, noise figure, compression point, and intermodulation distortion.
The document provides pricing information for Schneider Electric air circuit breakers, including the Masterpact NT, Masterpact NW, and their accessories. It lists specifications, components included, and unit prices in US dollars for various models of fixed and drawout circuit breakers ranging from 630A to 6300A. Additional information is provided on remote operation auxiliaries, chassis accessories, and contact Schneider Electric for more details.
This document provides information on several optically coupled isolator products from NEC Electronics, including the PS2561D-1, PS2561DL-1, PS2561DL1-1, and PS2561DL2-1. It includes specifications, electrical characteristics, package dimensions, and application information. The products contain a GaAs LED and silicon phototransistor packaged in plastic DIP or surface mount packages. They provide high isolation voltage up to 5kV, current transfer ratio up to 400%, and are intended for uses such as power supplies, telecommunications equipment, and industrial applications.
The video discusses the role of the British Royal Family in national and international politics. It defines constitutional monarchy and provides a brief history. It explores the Royal Family's role nationally, such as representing the UK abroad, and internationally, working with foreign leaders and charities. Key members of the family are significant in politics.
For more information, please feel free to visit the site at the following link: http://www.kynix.com/Detail/6239/IL711T-1E.html. You can choose Kynix as the first place and you can feel free to buy what you need in Kynix at the lower prices.
The μA741 is a general-purpose operational amplifier featuring offset-voltage null capability. It has a high common-mode input voltage range, short-circuit protection, and stability without external components. The μA741 is available in various package options and is characterized for operation over different temperature ranges depending on the specific part number.
This document provides data sheets for the PS9151 high noise reduction photocoupler. It includes specifications for the device such as electrical characteristics, maximum ratings, recommended operating conditions, and usage cautions. The photocoupler contains an LED input and CMOS output integrated circuit designed for high-speed logic interface circuits up to 15 Mbps. It provides high common mode transient immunity and isolation voltage up to 3,750 Vrms.
This technical data sheet provides specifications and options for an industrial generator. It includes:
1) Details on the voltage regulators, windings, terminals, shaft, insulation, and quality assurance.
2) Ratings for the generator including voltage configurations, kVA ratings, efficiencies, and reactance values.
3) Curves showing efficiency, locked rotor starting, and short circuit performance.
This document provides information on the MX341 Automatic Voltage Regulator (AVR) including:
- A general description of the AVR and how it regulates generator output voltage.
- Technical specifications for the AVR including voltage and current ratings, regulation accuracy, response times, and environmental tolerances.
- A diagram showing the main functions of the AVR which include voltage sensing, reference voltage generation, low frequency detection, and power control of the exciter field.
- Notes on features such as the external voltage adjustment, under frequency protection, analog input, and quadrature droop input.
This document is a datasheet for the TD1410, a 380KHz fixed frequency monolithic step down switch mode regulator with a built in internal Power MOSFET capable of delivering 2A of continuous output current over a wide input voltage range. The datasheet provides details on the device including electrical specifications, typical application circuits, thermal considerations, and function descriptions of the various pins. It is intended to provide engineers with the necessary information to properly utilize the TD1410 in their circuit designs.
INCHANGE Semiconductor produces isc Thyristors 5P4M for applications such as motor speed control, temperature control, constant voltage power sources, battery chargers, and automotive regulators. The product has an absolute maximum repetitive peak off-state voltage of 400V and on-state current of 5A at 103°C case temperature. It has a junction to case thermal resistance of 3°C/W.
This document provides information on optocouplers (IL4116/IL4117/IL4118) that have a phototriac output, zero crossing detection, and very low input current. The optocouplers consist of an LED optically coupled to a photosensitive zero crossing TRIAC network and can isolate low voltage logic from 120/240/380VAC lines. They feature high input sensitivity down to 1.3mA, zero voltage crossing operation, blocking voltages up to 800V, and on-state currents up to 300mA. The optocouplers can control loads such as motors, solenoids, thyristors and relays in applications including solid state relays,
The FOD3150 is a high noise immunity, 1.0A output current gate drive optocoupler capable of driving IGBTs and power MOSFETs. It has a propagation delay of 500ns max and provides isolation of 5000VRMS. Key features include high common mode rejection ratio, wide supply voltage range of 15-30V, and an operating temperature range of -40°C to 100°C. It is well suited for applications such as industrial inverters, UPS systems, induction heating, and isolated gate drives.
The LM124/SA534/LM2902 series consists of four independent, high-gain, internally frequency-compensated operational amplifiers designed specifically to operate from a single power supply over a wide range of voltages.
This document provides specifications for TE Connectivity's slimline PCN and PCNH series general purpose low power PCB relays. The PCN relay has a 1 pole 5A normally open contact, operates at 120mW, and is only 5mm wide, allowing for high packing density. The PCNH has a single contact and higher performance 180mW coil. Both comply with RoHS and offer cadmium-free contacts. The document provides detailed contact, coil, insulation, mechanical, and other technical data for the relays.
This document provides a macromodel for the MC33078 dual operational amplifier. The macromodel code is provided which models the input stage, amplifying stage, and output stage of the operational amplifier. Electrical characteristics obtained from simulations using the macromodel are also listed, including voltage gain, supply current, input common mode voltage range, and other key parameters.
This document provides specifications and installation instructions for the HEXE1MM and HEXE1MM-53 motor monitors. Key specifications include:
- The modules have 4 digital DC inputs, 4 current transformer inputs, 1 PTC input, and 4 relay outputs.
- The digital inputs accept ±12/24VDC, current inputs include options for 0-5A, 0-100mA, and 0-1A, and relay outputs are rated for 3A at 230VAC.
- Installation instructions include wiring diagrams, I/O register mapping, and derating charts for relay life expectancy based on load current.
- Safety precautions are provided and technical support contact information is listed.
The document summarizes the specifications and performance of the FMA219 X-band LNA MMIC. Key points:
- It is a 2-stage pHEMT low-noise amplifier operating from 7-11 GHz with a noise figure of 1.5 dB, small signal gain of 21 dB, and output power of 12 dBm.
- Typical applications include use as a low-noise front end amplifier or general gain block in X-band systems.
- Electrical specifications and performance curves are provided showing the amplifier's gain, noise figure, compression point, and intermodulation distortion.
The document provides pricing information for Schneider Electric air circuit breakers, including the Masterpact NT, Masterpact NW, and their accessories. It lists specifications, components included, and unit prices in US dollars for various models of fixed and drawout circuit breakers ranging from 630A to 6300A. Additional information is provided on remote operation auxiliaries, chassis accessories, and contact Schneider Electric for more details.
This document provides information on several optically coupled isolator products from NEC Electronics, including the PS2561D-1, PS2561DL-1, PS2561DL1-1, and PS2561DL2-1. It includes specifications, electrical characteristics, package dimensions, and application information. The products contain a GaAs LED and silicon phototransistor packaged in plastic DIP or surface mount packages. They provide high isolation voltage up to 5kV, current transfer ratio up to 400%, and are intended for uses such as power supplies, telecommunications equipment, and industrial applications.
The video discusses the role of the British Royal Family in national and international politics. It defines constitutional monarchy and provides a brief history. It explores the Royal Family's role nationally, such as representing the UK abroad, and internationally, working with foreign leaders and charities. Key members of the family are significant in politics.
This summary provides an overview of Tony Hsieh's presentation at the Fortune Sales Summit on delivering happiness and building a strong company culture at Zappos. Hsieh discusses how Zappos prioritizes culture above all else and ensures employee happiness in order to best serve customers. The presentation includes examples of how Zappos recruits for culture, shares its culture book with employees, and helps other companies implement similar cultural practices to boost customer service, retention, and overall success.
This document discusses a study on security in smart cities. It notes that by 2030, 60% of the world's population will live in large cities, and smart city initiatives use information and communication technologies to improve city management and services. The study aims to analyze security issues related to heterogeneous sensor networks, which are a key element in smart cities. It involves adapting the Castalia simulation environment to model attacks on deployed sensor networks and understand their vulnerabilities and impacts. The document outlines the background, development of the simulation, planned analysis and results, conclusions, and acknowledgements.
Las 7 leyes espirituales del éxito de deepak chopraAna Sek
Las siete leyes espirituales del éxito de Deepak Chopra fue escrito en el 1994. En este libro, Deepak propone el camino de la meditación en un concepto básico: todos somos parte de una energía infinitamente creativa universal que se puede acceder para conseguir todo lo que queremos.
This document discusses the transition from inventor to entrepreneur and developing a business. It emphasizes the importance of considering the market from the beginning and designing product development activities, like pretotyping and minimum viable products, to learn about customer needs and validate market assumptions early. Tools like early customer development can help explore markets and test value propositions before significant resources are invested. The goal is to achieve product-market fit and build a sustainable business model around creating, delivering, and capturing value for customers.
Intasc standards, special interests reportSarah Sell
The INTASC standards outline 10 principles that define the knowledge, skills, and professional dispositions expected of novice teachers. The standards address understanding content, student development, diversity in learning, instructional design, classroom management, communication, planning, assessment, self-reflection, and professional engagement. Adhering to the INTASC standards helps ensure teachers are prepared to enter the profession and provide an effective learning environment for all students.
This document discusses the 5 main religions in Indonesia: Islam, Christian, Catholic, Hindu, and Buddhist. It lists the places of worship for each religion such as mosques, churches, temples, and viharas. It also mentions some major religious holidays like Idul Fitri, Christmas, Nyepi, and Waisak.
La Unión Europea ha acordado un paquete de sanciones contra Rusia por su invasión de Ucrania. Las sanciones incluyen restricciones a los bancos rusos, la prohibición de la venta de aviones y equipos a Rusia, y sanciones contra funcionarios rusos. Los líderes de la UE esperan que las sanciones aumenten la presión económica sobre Rusia y la disuadan de continuar su agresión contra Ucrania.
En nuestra lista puede encontrar información de precios y promociones de todos nuestros productos,actualizada según la fecha del documento.
Vigencia hasta 15 de Enero de 2014
A flashback infographic of our profile on Slide Share for the year 2013.Its been only 6 months on Slideshare and we love the success we have gained so far with a presentation platform like Slideshare.
Seo Cycle - Ilustrações de ciclos de SEOMarcio Okabe
Seleção de ilustrações de Ciclo de SEO de diversos sites. Muito útil para perceber diferentes perspectivas sobre como implantar a cultura de SEO dentro das empresas.
Selection of ilustrations of SEO Cycle of many sites.
El documento presenta eventos culturales y espectáculos que tendrán lugar en Saucepolis entre el 11 y el 17 de enero, incluyendo el ballet Cascanueces en el Teatro Principal, un concierto de Sidonie en la Sala Oasis, la exposición "Del Greco a Picasso" en la Universidad, y la obra Sueño de una noche de verano de Ur Teatro en el Teatro Principal. También incluye información sobre horarios de museos y predicción del tiempo para la semana.
Appsworld 2016 - Ad Monetization Strategies - Josh CurtisJosh Curtis
Josh Curtis gave a presentation on mobile game monetization strategies through advertising. He discussed industry trends showing growing mobile game ad revenue. He outlined key metrics like eCPM, ARPPU, and impressions that are important for monetization. Curtis then reviewed different ad formats like banners, interstitials, videos and native ads, noting their pros and cons. He emphasized testing placements, formats and user experiences to optimize monetization. In general, Curtis recommended treating ad monetization as a key business line through ongoing experimentation and investment.
This document outlines the values of an organization as being empathetic, proactive, trustworthy, and committed in order to protect the New Zealand way of life. These values belong to the community of staff members who share recognition cards and nominate employees of the month to thank colleagues for living these values.
How to Quickly Find Awesome Ideas for Your BlogSteve Williams
This document is about idea generation for your blog post writing.
Here is a brief overview of what you will get from this document:
• Idea generation tips
• How to overcome your writer’s block
• The types of blog posts you need to write
• Copywriting techniques
• Ideas to create headlines
• Tips about lead magnets
• Evergreen content ideas
• Grammar and readability suggestions
This document provides an overview of contractor plant and machinery insurance. It discusses that the insurance provides comprehensive all-risk coverage for unforeseen physical damage to insured machinery while at work, at rest, during dismantling or shifting on site. It also summarizes various coverage's such as external accidents, collision, overturning, fire, theft and burglary. Additional optional covers like third party liability, debris removal and escalation are also mentioned. Exclusions like wear and tear, consequential loss, and nuclear perils are provided. Underwriting considerations like machine details, location, loss history and registration are highlighted. Risk grouping and premium discounts for higher excess amounts are summarized as well.
Public Safety and the Internet of Everything Case StudiesConnected Futures
The document discusses case studies of how public safety organizations have used Cisco technology to improve their operations. It describes how the International Justice and Public Safety Network (Nlets) used Cisco's IP network to encrypt sensitive information and improve reliability. Boulder County, Colorado achieved full communications interoperability using Cisco IP Interoperability and Collaboration System. Network Emergency Response Vehicles enable rapid deployment of mobile command centers during emergencies. The City of San Antonio leveraged its fiber optic network and Cisco video technology to increase revenues, cut costs, and improve services.
This document describes the TPS31xx family of ultra-low supply current/voltage supervisory circuits. These circuits provide power-on reset and voltage monitoring functions. They feature precision voltage thresholds from 0.9V to 3.3V, 1.2uA typical supply current, and reset outputs that can be open-drain or push-pull. The circuits monitor the supply voltage and reset outputs are active when voltage is below the threshold. They are available in a small SOT-23 package and are suitable for use in low-power applications.
This document describes the TPS31xx family of ultra-low supply current/voltage supervisory circuits. The circuits provide power on reset and voltage monitoring functions for systems powered from 0.9V to 3.3V. They have precision voltage thresholds as low as 0.9V, supply currents of 1.2uA, and reset outputs that can be open drain or push pull. The devices monitor the supply voltage and provide a reset output if the voltage drops below the threshold. They are available in a small SOT-23 package and are suitable for use in low power applications.
The document describes the TPS3305 family of dual processor supervisors. It provides:
- Monitoring of two independent supply voltages like 3.3V/1.8V, 3.3V/2.5V or 3.3V/5V.
- A reset output that is asserted when supply voltage rises above 1.1V or if the monitored sense voltages fall below their threshold.
- An internal watchdog timer that will assert reset if not retriggered within 1.6 seconds.
- Packaging in 8-pin MSOP or SO packages for operation from -40°C to 85°C.
The NCP3170 is a synchronous PWM switching converter that operates from 4.5V to 18V and sources up to 3A of output current. It is capable of producing output voltages as low as 0.8V and incorporates current mode control with many features like soft start, power good detection, and fixed switching frequencies set internally to reduce external components. It is available in an 8-pin SOIC package and is suitable for applications such as set top boxes, DVD/Blu-ray drives, LCD monitors/TVs, and telecom equipment.
The LM317 is an adjustable 3-terminal positive voltage regulator chip capable of supplying 1.5A over a voltage range of 3V to 40V. It requires only two external resistors to set the output voltage and offers better performance than fixed regulators. It provides protection against overloads, overheating, and short circuits. Common applications include programmable and precision current regulation. It can adjust output from 1.2V to 37V with input regulation of 0.01% and output regulation of 0.1%. Maximum operating temperature is 125°C.
Original High Performance Off-Line Controller IC ACT30 CT30 30 New Active-SemiAUTHELECTRONIC
The document describes the ACT30, a high performance off-line power supply controller IC. It has features like low standby power of 0.15W, overcurrent protection, and hiccup mode short circuit protection. It uses current mode control and can drive external NPN or MOSFET switches. It is suitable for use in battery chargers, adapters, and other power supplies.
The AZ60A8DDC is a PWM servo drive designed to drive brush-type DC motors at high switching frequencies. It has a peak current of 60A, continuous current of 30A, and operates from 10-80VDC. The drive provides motor control and protection from overvoltage, undervoltage, overcurrent and more.
The TL082 is a dual JFET-input operational amplifier that provides high speed and low noise performance. It has an internally trimmed input offset voltage, low input bias current, wide gain bandwidth of 4 MHz, and high slew rate of 13 V/μs. The TL082 can be used in applications such as high speed integrators, sample and hold circuits, and other circuits requiring fast operation and low noise.
[1] The document provides installation and wiring instructions for TECNOLOGIC K series temperature controllers.
[2] It describes the mounting requirements including ambient temperature and humidity ranges, and notes the instrument is only for indoor use. Wiring diagrams and specifications are provided for different input and output types.
[3] The document also covers the configuration procedure for setting parameters, and lists the technical specifications including dimensions, power supply, accuracy, and ordering codes for different models.
This document provides a summary of the L293 and L293D integrated circuits. The L293 and L293D are quadruple half-H drivers designed to provide bidirectional drive currents of up to 1A and 600mA respectively. They can be used to drive inductive loads such as relays, solenoids, DC motors, and stepping motors. Key features include a wide supply voltage range of 4.5V to 36V, separate logic and output supplies, internal ESD protection, and thermal shutdown protection. The document provides pinout diagrams, electrical specifications, and an application circuit for driving a two-phase motor.
This document provides installation and configuration instructions for the TECNOLOGIC K49 series controller. It outlines:
1) Mounting requirements for the controller, including ambient temperature, humidity, and vibration limits. The controller is intended for indoor use.
2) Wiring diagrams and notes for different input types (thermocouple, RTD, voltage, current) and outputs (relays, SSRs). Proper wiring techniques are emphasized to avoid errors.
3) Technical specifications for the controller, including display type, accuracy, EMC standards, operating temperature, and power supply options. Instructions are provided for ordering controllers with different configurations.
The document provides installation and wiring instructions for TECNOLOGIC K series controllers. It specifies that the controller is intended for indoor use and should be mounted in an easily accessible location with minimal vibrations that avoids corrosive gases, water or condensation. Wiring guidelines are provided for different input and output types, including thermocouples, RTDs, voltage/current signals, and relays. Configuration and programming procedures are outlined.
This document provides installation and operation instructions for the TECNOLOGIC K48 series temperature controller. It outlines:
1) Mounting requirements for the controller, including ambient temperature and humidity limits.
2) Wiring diagrams and notes for different input types (thermocouples, RTDs, etc.), outputs (relays, SSRs), power supply, and logic inputs.
3) Technical specifications for the controller, including accuracy, display, sampling rate, and certifications.
4) Procedures for configuring the controller, including accessing parameters via passwords and navigating groups to set input type, control strategy, alarms and other functions.
The DRV8833 is a dual H-bridge motor driver that can drive two DC motors or one stepper motor. It has the following key features:
- Provides PWM current regulation/limiting for motor windings
- Capable of driving 1.5A RMS continuous current per bridge
- Package includes a PowerPAD for improved thermal performance
- Includes protections for overcurrent, short circuits, undervoltage, and overtemperature
This document provides specifications for the ACPL-C87B/C87A/C870 precision optically isolated voltage sensor. It includes:
- Key features such as high input impedance, wide operating temperature range, and small package size.
- Electrical specifications including gain accuracy of ±0.5% for the ACPL-C87B, input offset voltage, nonlinearity, and temperature drift.
- Recommended operating conditions and absolute maximum ratings.
- Safety and regulatory approval information for worldwide use.
This document provides installation and configuration instructions for the TECNOLOGIC K series controller. It outlines the mounting requirements including dimensions, environmental conditions and panel thickness. It describes the input/output connections and wiring diagrams. The configuration procedure involves entering password-protected modes to modify parameter groups that control functions like control strategy, alarms and outputs. The factory default parameters can be restored for reconfiguration.
The PT4115 is a step-down LED driver that operates from 6-30V and provides up to 1.2A of output current. It uses high-side current sensing and has a DIM input that allows for PWM or DC dimming from 5000:1 to 25:1. It is available in SOT89-5 and ESOP8 packages and is designed for applications such as lighting, signs, and backlighting.
The document summarizes specifications for the Aurora Trio 10.0 kW and 12.5 kW three-phase string inverters. It has two independent MPPTs, high maximum efficiency of 97.8%, and wide operating voltage and frequency ranges to optimize energy harvesting. It is designed for outdoor commercial use and includes an electrolyte-free power converter, three-phase bridge topology, and optional integrated DC switch for increased reliability.
Original High Voltage Isolation IC ACS710T KLA-12CB 710T SOP-16 NewAUTHELECTRONIC
The Allegro ACS710 current sensor provides economical and precise current sensing for industrial, commercial, and communications systems. It uses a precision linear Hall sensor integrated circuit with a copper conduction path near the surface to linearly track the magnetic field generated by the applied current. The sensor offers high immunity to electrical noise and low offset drift, and provides an analog output voltage and integrated overcurrent detection. It is available in a small surface-mount package.
The AZ25A20 is a PWM servo drive designed to drive brush-type DC motors at high switching frequencies. It has a peak current of 25A, continuous current of 12.5A, and operates on a supply voltage of 40-175VDC. The drive is compact, lightweight, and designed for direct integration into PCBs. It provides overvoltage, undervoltage, overcurrent, and overheating protection.
Similar to DS-00593-14-XTR70020-High-temperature, High Input Voltage, 2A Positive LDO Regulator (20)