Hussein Ali Hussein El Wakil has over 15 years of experience as a senior electrical engineer working on power plant projects in Iraq and Egypt. He has expertise in electrical design, construction, testing and commissioning. His career has involved roles such as senior site engineer, electrical testing and commissioning engineer, technical office manager, and installation engineer on various power, industrial and commercial projects.

1. Hussein Ali Hussein El Wakil
Senior/ Lead Electrical Engineer
SARAYA EL KOBA, ZYTOON- CAIRO
Mobile no : 010 666 210 28; 012 891 621 50
Hussein Ali Hussein El Wakil has 15 years of experience in the field of Electrical Engineering for power plant and
Construction.
Objective Senior Electrical Engineer
Current
employment
Senior Electrical Power Engineer in engineering, construction and
commissioning in power plant field (generation system, high Voltage,
,Medium power and low voltage)
Working on PGESCo ( Power Generation Engineering and Service
Company ) Consultant company of electrical power plant (Electrical
Power Station)
From December 2007 till now
For the following projects:
Wassit thermal power plant phase I &II 4x330 + 2x610 MW (in IRAQ).
Salah El Din thermal Power plant 2x630 MW (in IRAQ).
Al Anbar combined cycle Power plant 1620MW (in IRAQ).
Giza North combined cycle Power plant 3x750 MW (in EGYPT).
Abu Qir thermal power plant 2x650 MW (in EGYPT).
El-Atf combined cycle power plant 750 MW (in EGYPT).
Sidi-Krir combined cycle power plant 750 MW (in EGYPT).
Cairo north combined cycle power plant 2x750 MW (in EGYPT).
Provide technical support to El-Suez (1x650 MW)
Provide technical support to El Shabab and West Damietta power plant.
Senior electrical engineer :
o Engineering, Construction, Testing and Commissioning engineer.
Having Management skills.
Performing all electrical technical tasks.
Performing all testing and commissioning tasks.
Reviewing and give the required approval for vendor designs, calculations, documents
and drawings.

2. Performing the readiness review process for several power plant.
Preparing the project technical specifications and bid evaluation.
Performing the evaluation of contractor offers against Owner specifications, standards
and meet Owner requirements.
High awareness of all electrical standards IEEE, IEC, NEMA and NFPA.
Performing Co-ordination with Owner, Contractors and Vendors via (meetings,
conference calls, and emails).
Performing internal Co-ordination and communication among all disciplines and team
work.
Performing Detailed Discipline Personnel Forecast.
Reviewing and checking work of subordinate engineers.
Senior design engineer in engineering department for 8 years
Performing several engineering tasks (Design and Review) as following:
• Sizing the Main and Aux transformer (power transformer).
• Sizing the IPB (ISO Phase Bus).
• Sizing the DC and UPS.
• Sizing the Emergency Diesel Generators.
• Sizing all type of cables (High current, Low voltage and Low current).
• Sizing the Medium voltage cable.
• Perform the MTO (for all cable types and cable trays).Review the Switchgear and load
center sizing and short circuit.
• Review the generator protections setting and function.
• Review the relay setting calculation for switchgear and power transformer.
• Design and review for all power system, lighting system, grounding, lightning system
and low current systems.
• Review and give the approval of contractor and vendor designs, calculation and
drawings
Senior Site engineer (Construction, testing and commissioning)for 7 years
• Generator and Excitation System
• Main, Auxiliary and Station service transformers.
• Generator Circuit Breaker
• Protections systems for generator, transformer and switchgear
• Medium voltage Switchgear
• Load center (LC) and Motor control center (MCC)
• UPS and DC System
• Earthing, Lightning and cathodic protection system
• Cable trays, duct bank and Conduits
• Lighting system, socket and Low current system (telephone, fire alarm, CCTV,
network and paging)
• All Cable type (MV, LV and Control cable)
• Performing all required Co-ordination with Owner, Contractors and Vendors

3. Electrical testing and Commissioning Engineer “site engineer”
♦ Working on CEPC “Cairo Electricity Production Company”
Cairo north combined cycle power station 1500 MW
From June 2004 to November 2007
Electrical engineer for the following tasks:
4x 250 MW Gas turbine generators for Cairo north power station project.
2x 250 MW Steam turbine generator for combined cycle
Power transformers of 340, 337,314, 24 and 22 MVA
Medium Voltage Switchgear, Load Center and Motor Control Centre.
DC and UPS system
Electric drives, pumps and motors.
Medium and Low Voltage Cables.
ISO Phase Bus (IPB)
Power, lighting, grounding, low current system (telephone, network, paging, fire
alarm), and cathodic protection system
‫٭٭‬ Factory Inspection according to project specification standards (ANSI,ASME
,IEC,IEEE) equivalent for each of the following :
2 of (400V-2000A) MCC switch boards, at Electro-Gorge factory.
Distribution Panels board at MEMCO factory.
ISO Phase Bus (IPB) Of Steam Unit at ARAB STEEL .CO (EL-SWEEDY factory).
Medium and low voltage cables in (EL- SWEEDY factory).
Medium and low voltage cables in (EL- GIZA factory).
Medium voltage switchgear at ABB factory
‫٭٭‬‫٭‬ Site inspection for installation and commissioning according to
project specification for the following :
Generator (G.E )
Excitation System (G.E & ALSTOM)
Generator Circuit Breaker (AREVA)
Power transformers 338, 340 and 24 MV A (ABB) & (AREVA) and their protections
Medium switch-gear (ABB) & (SHNIDER) & (Electro-Gorge) and their control
circuits.

4. Load center (LC) and Motor control centre (MCC) (ABB) & (Electro-Gorge) and
their protection and control circuits.
UPS and DC System
Earthing System, Cable trays, Conduits, Construction Power System and Electric
package installation, Lighting system, Low current system (telephone, network,
Paging) and cathodic protection system.
work
experience
3- Technical office manager engineer (design and management) in
System-Plus company From 7/2002 to 6/2004 for the following project :
RESIDENCE & FARM OF HH AMBASSADOR– AHMED QUTTAN ELMANSORIA–
GIZA
SAFIR ZAMALIC –HOTEL.
SOFETIL HOTEL –SHARM EL- SHEIK.
INTERCONTENENTAL HOTEL –SHARM EL- SHEIK
EL SHARBATELY MOSQUE
AND MANY OTHER PROJECT
Work
experience
4- Installation engineer in elevator company From 9/2001 to 7/2002 for
Many project
Work
experience
My experience for the following:
a) Electrical design and supervision for construction of all electrical
work (all medium and low voltage work)
a. MV/LV Power cables
b. Cable tray and bus way
c. Grounding and Earthing system
d. MV/LV Switchgear
e. Lighting and Socket system
b) Electrical design engineer ( Design of low current work)
a. Computer network system
b. Telephone system

5. c. Fire alarm system
d. Sound system
e. CCTV system
f. Security system
For the following projects :
1. Hospital project
2. Car service center project
3. Many malls project
4. Many land escape project
5. Many factory project
6. Many buildings and villas project
7. Many domestic project
8. Many mosques project
9. Many shops
c) Electrical and control engineer (Establishing and supervision for
computer and fiber network)
For the following projects :
a. Cairo university “El Fayoum university” Branch
b. Head Office of Multinational companies
c. Egypt Air - Sharm El-Sheikh
d) working as part time in engineering consultant office:
1. Hospitals project
2. Car services project
3. Malls project
4. Mosques project
5. Domestics project

6. Training
courses ON SHURE TRAINING
• PGESCO TRAINING FOR SOFTWARE: INFO-WORK, MICRO STATION,
BLOCK DRAW AND SETROUTE.
• PGESCO TRAINING FOR SOFTWARE: (EARTHING SYSTEM AND
CATHODIC PROTECTION SYSTEM).
• CAIRO ELECTRICITY PRODUCTION COMPANY: (GAS TURBINE
PRINCIPLES AND SUPPORT SYSTEMS).
• HITACHI / CONISYS CONSORTIUM :( GENERATOR CIRCIUT BREAKER AND
MAIN, AUXILIARY TRANSFORMER).
• CEGELEC CO: (OPERATION AND MAINTENANCE OF ALSTOM AREVA –
PROTECTION SYSTEM.
• CEGELEC CO: (OPERATION AND MAINTENANCE OF DC AND UPS).
• GENERAL ELECTRIC CO: (OPERATION AND MAINTENANCE OF
EXCITATION SYSTEM AND PROTECTION).
• NEM CO: (HRSG INSTRUMENTATION MAINTENANCE).
• INITEC CO: (PROTECTION OF TRANSFORMER).
• INITEC CO: (MEDUIM VOLTAGE, LOAD CENTRE AND ITS PROTECTIONS,
DC AND UPS SYSTEM.
• SCHEIDER and ABB: (MEDUIM VOLTAGE, LOAD CENTRE AND ITS
PROTECTIONS.
• SHAKER GROUP CONSULTANT: DESGINE AND SHOP DRAWING.
OFF SHURE TRAINING
• NEM CO: (HRSG INSTRUMENTATION MAINTENANCE). ON HOLAND AND
GERMANY FOR THREE WEEKS

7. Education
Bachelor Of Electric Power Engineering,
AIN SHAMS UNIVERSITY
Graduation Grade : good
Graduation year : 2001
Project : Dynamic performance of three phase induction motor using
. computer simulation
Grade : Distinction
Languages Arabic : Excellent spoken and written (mother tongue)
English : very good spoken and written
Computers
skills
WINDOWS /INTERNET/ OFFICE.
MATLAB & AUTOCAD& DIALUX & ETAP.
Nationality
Egyptian
Marital Status
Married
Military status
Finished