Norwegian Technology in India For uniform aeration All across any aquaculture farm To know more call us at: +91 – 9652122060 Email: marketing.airoxitube@gmail.com info@airoxi.com www.buy.airoxi.com

1. Norwegian Technology in India
For uniform aeration
All across any aquaculture farm
www.Airoxi.com
Presents

2. LARGE AQUA FARMS OF MORE THAN 2 ACRES,
NEED INTENSE AERATION
• Often aeration system is installed in the
periphery
• However large farms of more the 2 acres, for
species such as Vannamei, need a very efficient
aeration system with very small bubbles
• Aeration needs to be more uniform without any
dark areas with DO low
• So aeration only in the corners with a paddle
wheel aeration system or with a regular aeration
is not sufficient

3. MORE REASONS WHY INTENSE AERATION IS
NEEDED IN LARGE FARMS
• Oxygen levels drop at high temperatures in
summer/early autumn
• This reduces Feed Conversion Efficiency,
increases mortality and negatively impacts
growth rate

4. Identifying this aeration need of farmers,
AirOxi is proud to offer the AirX – the latest
Norwegian Technology in India
www.airoxi.com
A special double walled EPDM tube
that has very fine bubbles

5. AirX Advantages
• Solves the problems arising from oxygen deficiency
• Automated system manages air according to oxygen
saturation in the water
• Oxygenates large areas - ponds and fish cages
• Homogenous distribution of oxygen (not only at surface)
• Direct diffusion in areas where oxygen is most needed
• No upwelling currents (increases contact time/transfer
efficiency)
• Can be used for routine oxygenation in fish farms

6. • Material – EPDM double walled tube
• Safe to use with most liquids
• Dimensions – Inside diameter – 12 mm.
Outside Diameter – 20 mm
• Compatible fittings - Fittings of ½” / 16 mm
• Standard roll length – 100 mtr
• Usage - Compatible for wide range of
industrial, commercial, aquaculture in fresh,
brackish or salt water, as well as effluent
and sewage applications
AIRX TUBE TECHNICAL DETAILS..

7. • Air Flow – Optimum – 5 LPM / 0.3 m3/hr
Maximum – 15 LPM / 0.9 m3/h3
• Holes – Micro holes of 0.2mm, all around
periphery and in both inner and outer tubes
• Usage length – Flexible and can be made
into any grid or shape
• Maximum length with single injection of air
will depend on depth of installation and air
pressure
• Due to double wall holes, long lengths are
possible with minimum reduction in pressure
along the length unlike in single wall
diffuser
..AIRX TUBE TECHNICAL DETAILS

8. How to reach us
+91 9652122060
info@airoxi.com
www.buy.airoxi.com
Thank you