This document provides information on various types of pumps manufactured by Versamatic, including specifications and capabilities. It discusses bolted and clamped standard pumps, as well as special pumps for high pressure, submersible, sanitary, and FDA compliant applications. It also summarizes quality assurance testing procedures and additional services available from Versamatic like custom nameplates and certifications. Contact information is provided for Versamatic manufacturing and sales support facilities.
7. IDEX Proprietary & Confidential
• Bolted Design
• Porting Option – Center, Side & Dual
• Available Sizes: 1/4”, 3/8”, 1/2”, 1”, 1-½”, 2”, 3”
• MOC Options : Polypropylene, PVDF
• Flow Rate: 0- 238GPM
• Maximum discharge Pressure – 100PSI
• Can Handle Solids up to 18mm in size.
• Ball Type Check Valves
8. IDEX Proprietary & Confidential
High Pressure Pumps:
•Metallic construction – Aluminum and Stainless
Steel
• Works on 2:1 principle i.e. Deliver discharge
pressure twice the inlet pressure, up to 17 bar.
• Designed for filter press feed and applications
requiring higher discharge pressure.
• Flow Rate – 90GPM
• Maximum Solid size allowed – 6mm
9. IDEX Proprietary & Confidential
The PortaPump®
• Battery powered pump, operates
using any truck or car 12-volt battery.
• It comes equipped with cables and
battery clips.
• Extremely portable and can fit
through opening as small as 10”.
• Port size – 1½”
• Flow Rate – 43 GPM
• Maximum Solid size allowed – 1mm.
The SludgeMasterTM
• Air powered
• Designed to handle mud, leaves,
twigs, sand, sludge, trash-laden water
and soft solids to 1½“.
• High capacity, low head.
• Can fit through opening as small as
14”.
• Sturdy construction for rough
handling.
• Port Size – 3”
• Flow rate – 300 GPM
• Maximum Solid size allowed – 40mm.
10. IDEX Proprietary & Confidential
• High polish finish, internal & external both.
• Designed for CIP (Clean In Place)
• Rotating pump stand for easy draining
• Removable ball cages for cleaning
• Wing nuts for simple disassembly
• Nickel plated or stainless steel center section option
for chemical wash down
• Tri-clamp connection
• Size – 1½” and 2”
• Flow Rate – 0 to 180 GPM
• Maximum solid size allowed – 15.9mm
11. IDEX Proprietary & Confidential
•Ideally suited for variety of food processing, pharmaceutical and cosmetic
industry applications.
• Available Sizes: ½”, 1”, 1½”, 2”, 3”
• Flow Rate – 0 to 234 GPM
•Constructed of FDA material compliant components of Stainless
• E-nickel plated air Section
• Tri-clamp connection
12. IDEX Proprietary & Confidential
ATEX (Explosive Atmosphere)
FDA (Food and Drug Administration)
CE (Conformité Européenne)
UL (Underwriters Laboratories)
GOST-R
3A
14. IDEX Proprietary & Confidential
Reduce air consumption up to 50%
Automatically adapts to process conditions
Powered only by compressed air – No batteries
Increases productivity
Reduce compressor maintenance
Optimizes energy and performance
15. IDEX Proprietary & Confidential
Step 1:
• Air enters main inlet
• Small amount of air directed to turbine
that powers unit
Step 2:
• Air Regulator Valve controls air flow volume
• Air continues on standard path through air
system
Step 3:
• Sensor monitors pump velocity, sends data to
microprocessor
• Microprocessor calculates ideal air usage,
regulates air valve
16. IDEX Proprietary & Confidential
Size – 2” & 3”
Available in both metallic and non-metallic construction
Any 2” & 3” standard and heavy duty pumps can be upgraded to AirVantage
Flow Rate – 0 to 245 GPM
19. IDEX Proprietary & Confidential
• Reduce Pulsation
• Reduce Leaking / Damage
• Reduce Manifold Stress
Use Flex Connections
primarily on larger
units 1 ½”, 2”, and 3”.
20. IDEX Proprietary & Confidential
• No Lubrication Required
• Clean / Dry Air is a Plus
But Not Required.
Tip: Keeping the muffler
clean will improve
pump performance. A
dirty muffler can lead
to stalling.
21. IDEX Proprietary & Confidential
• Thermal Expansion
• Positive Inlet Pressure
• Head Pressure
“The Windows to Pump Performance”
22. IDEX Proprietary & Confidential
Leak DetectionFilter/Regulator Stroke counter/Batch control
Level ControllersSurge suppressors Air Dryer
24. IDEX Proprietary & Confidential
Versamatic Mobile App
My Pump Details
Chemical Compatibility Guide
Full line catalogs
Service & training videos
http://versamatic.com/mobileapps.asp
26. IDEX Proprietary & Confidential
Assembly cycle testing with hold pressure vacuum
readings (standard)
Certified one-point head capacity tests
Certified additional points
Dry lift testing
Hydro/pneumatic testing 90 psi (standard)
Hydro/pneumatic 1½ times maximum operating
pressure
Pump repair (labor only)
AODD Project Capabilities
Service Description
27. IDEX Proprietary & Confidential
Certificate of origin
Certificate of conformance (Pump)
Standard non-certified dimensional outlines (to order
contact Application Engineering)
Certified dimensional outlines
Material test reports (MTR)
Certificate of compliance (Material)
Epoxy, water based, two part (exterior only
Customer specific
PTFE
Halar
Nickel plating midsection
Custom and Engineered products and system to meet
your application
Custom product dimensional outlines
AODD Project Capabilities
Service Description
28. IDEX Proprietary & Confidential
Four (4) lines, maximum 24 letters
Custom Nameplate
PMI (Positive material identification
Hardness testing
Liquid penetrant testing
Radiographic testing
Magnetic particle testing
Other
Impact test
Seismic test
Sound test
Other
AODD Project Capabilities
Service Description