2. HELPING INDUSTRY SUCCEED
FOR OVER 70-YEARS
Our Customers tell us that by choosing Airmatic
to solve their problems, they gain increased productivity,
decreased cost, and a safer, cleaner work environment.
3
3. • Silo 12 Transfer of Off- Spec Cement @ 5-10 TPH
• Furnish and install skid mounted equipment package to unload Silo 12
(see concept drawing attachment).
• Upon request Airmatic, can provide separately Silo Cleaning Services
including CO2 Blasting and Bin Whipping to facilitate unloading of Silo 12
Purpose of Project
4.
5.
6.
7. • Furnish 4 powered tubular cement screws conveyors.
• Furnish and install receiving chute to accept cement from Silo #12 gate
valve.
• Furnish 1 - skid mounted 125 HP blower.
• Furnish 1 skid mounted surge bin with ladder /cage and hand railing to meet
MSHA requirements.
• Furnish 1 bin/silo vent for Surge Hopper.
• Furnish 1 rotary air lock.
• Furnish NEMA IV Control Cabinet with motor controls and indication.
• Furnish load cells and digital readout.
• Furnish 10x 25ft 6" rubber flex blow line with connectors.
• Furnish 6" inlet pipe with bell connectors at each end for flex line.
• Furnish 100 ft. of 6" sch. 120 pipe and required flanges.
Job Scope
8. • One-piece rotors and sealing strips
• Heavy-duty bearings
• Straight-cut gears
• Heat-treated, metal labyrinth piston ring seals
• Drive and gear end splash rings for optimized lubrication
Rotary Lobe Blowers
9. Two-Way SK Valve
• Left or right hand mounting
• 45° diverter leg
• Ductile iron housing with cast iron branch
• 50 psi seal tested
• 400°F Max. temperature
• Abrasion resistant design
• Explosion proof operators
10. • Dust emission < 1 mg/Nm3 due to EPA class IFA certified
filter media
• Air flow performance increased by 30%
• Maintenance-free air jet cleaning unit integrated into
weather protection cover
• Compact 800 mm (30 in) diameter stainless steel
body with bottom flange
11. Screw Conveyors
• Manufactured in carbon steel with a suitable surface finishing.
• A welded flange at each tube end,
• Self-adjusting shaft sealing unit, a number
of intermediate hanger bearings
• Equipped with a gear motor that suits the application.
12. • Heaviest gauge rotor vane stock
HDX Rotary Airlock Valves
• Extra thick endplates, flanges and housing walls
• Outboard mounted oversized bearings, prelubricated and
permanently sealed.
• Suited for any application that requires high temperature and
pressure.
13. Vibrators
AIRMATIC stocks the nation’s largest inventory of
Foot-Mount Vibrator Motors used by most
manufacturers of Feeders & Conveyors, Shakeouts,
Screeners, Densiers & De-airs, Bins, Hoppers,
Separators, Sifters, and Settlers & Compactors, and
we are a service center for most vibrator
manufacturers.
14. Remote Continuous Level Sensors
• "Quick-Set" SimpleCalibration
• Dual Conduit Entrance
• Unsurpassed Sensitivity (0.5 pF)
• Fail-Safe, Switch Selectable High / Low
• AdjustableTime Delay to 30-Seconds
•Visual LED Indicates Sensor Status: Uncovered, Covered, or Power Failure
15. • Assures long-life, each wire is clearly
labeled, and drawn schematic for simple identification.
• Meets NEMA 3, 12, 4, and 4X Standards which
means it’s dust-tight, hose-down grade and
corrosion resistant.
• Solid State overload protection minimizes nuisance
tripping or failure. This state-of-the-art overload
even detects phase loss, while generating far less
heat, saving energy, and extending life. Auto-reset assures
motor 3-minute cool-down.
Founded in 1944, AIRMATIC is a multi-division, woman-owned Industrial Distributor supplying products and services to industries that transport, store, and process bulk solid materials. We have been actively engaged in the precast industry since we helped pioneer the use of external air and electric vibrators to consolidate concrete in forms and molds in the mid 1960’s