SPS Heat Shrink Cable Glands, HCS1, 4-12mm

•

0 likes•2,231 views

The document describes a line of heat shrink cable entry glands made by Shrink Polymer Systems. The glands are available in six sizes to seal cables from 4mm to 70mm in diameter. They provide a watertight seal and secure fixing to electrical boxes. The flame retardant glands have been approved for use on high voltage cables by several UK electricity companies.

Technology

Unit E3, Crown Way, Crown Park Industrial Estate, Rushden, Northants, UK, NN10 6FD
Tel: +44 (0)1933 356758 Fax: +44 (0)1933 413821 Email: info@shrinkpolymersystems.co.uk
Skype: shrinkpolymersystems www.shrinkpolymersystems.co.uk
50
Heat Shrink Cable Entry Glands
• Six sizes cover cable diameters from 4mm through to 70mm
• Provides a watertight seal and secure fixing to gland plate/box
• Ideal for non armoured (except PICAS) power or fibre optic
cables
• Approved and used by various UK regional electricity
companies for use on 95-300mm² 11kV PICAS cables
• Flame retardant
The HCS series of heat shrinkable cable
entry glands were developed to provide
a cost effective method of providing a
weatherproof seal on a wide variety of
cables.
The glands are manufactured
in accordance with MIL-1-
81765/1 and MIL-1-23053/15
specifications and provide a
flame retarded adhesive lined
body along with a male threaded
part to enable fixture to the gland
plate.
The range comprises six different sizes as detailed below.
Ref No Cable O/D max Cable O/D min
Bulkhead Thickness
Max
Length Rec Drill Hole
HCS 1 12mm 4mm 6mm 95mm 26mm
HCS 2 17mm 7mm 6mm 95mm 26mm
HCS 3 26mm 13mm 6mm 100mm 35mm
HCS 4 38mm 19mm 6mm 130mm 51mm
HCS 4s 53mm 19mm 10mm 170mm 60mm
HCS 5 70mm 36mm 6mm 200mm 88mm

CMP Zen Insulated Cable Glands - High Voltage Cable Termination with Brass or Aluminium Cable Glands In the power generation industry unless special measures are taken to both segregate LV-HV cables in accordance with wiring regulations, and also isolate the metallic cable armour from running in continuous contact throughout the whole of the earthing system, interference or electrical noise would spread throughout the plant. CMP Zen Insulated cable gland system allows cables to be earthed at one end only - single point earthing - and insulated at the field end. Insulated Zen cable glands are available to ensure that no contact is made between the earth circuit carried through the cable armour and the low-high voltage electrical enclosure which the cable enters. CMP Zen Insulated cable glands permit electrical design engineers to implement safe earthing systems to deal with : *Cross Talk Noise Reduction *Electrical Separation of Main Earths *Earth Fault Segregation *Fault Current Reduction with Series Cable Resistance *Electrical Noise Reduction in Instrument Cables *Circulating Current Production in Single or 3 Core High Voltage Cables CMP Zen insulated cable glands are suitable for use with all screened steel wire armoured (SWA) and aluminium wire amoured (AWA) cables. Zen cable glands are tested and approved for use in containment areas of the Nuclear Power industry. -

3M Heat Shrink Tubing & Sleeving

Thorne & Derrick International

Raychem Heat Shrink - Raychem Tyco Heat Shrink Tubing And Sleeving

Thorne & Derrick International

3M Cold Shrink QT-III Indoor & Outdoor Cable Terminations Brochure

Thorne & Derrick International

3M Medium Voltage Cable Terminations, 5kV–46kV, 2013 Electrical Product Catal...

Thorne & Derrick International

Heat Shrink Cable Joints & Cable Terminations LV HV, 6.6kV 11kV 33kV - SPS Ca...

Thorne & Derrick International

SPS Heat Shrink Joints to Suit Low Voltage Cables 0.6/3.3kV

Thorne & Derrick International

Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kV

Thorne & Derrick International

What's hot

Heat Shrink Joints to Suit Single Core Low Voltage Cables Type XLPE/SWA/PVC 0...

Thorne & Derrick International

Charles Endirect Street Lighting Equipment

Thorne & Derrick International

Centriforce Utility Protection Brochure

Thorne & Derrick International

Street Lighting Polypipe Cable Duct

Thorne & Derrick International

Quicki straight & branch gel joint

Cable Glands UK Ltd

Polypipe Cable Ducting - Gas Pipe Ducting

Thorne & Derrick International

Zero Halogen Heat Shrink 120mm-40mm - W3 NH 120/40

Thorne & Derrick International

Pfisterer Sicon High Voltage Mechanical Shearbolt Connectors

Thorne & Derrick International

LUL Compliant Optical Fibre 48 Way IP67 Splice Enclosures

Thorne & Derrick International

Platinum Tools 15001C Data Sheet

JMAC Supply

LappTannehill-Automotive-forWebMonica Carlson

Anderton Ander-Fin Cable Theft Deterrent - Brochure

Kath Ford

Ds wbf6 24-seriesMCL Data Solution

What's hot (13)

Heat Shrink Joints to Suit Single Core Low Voltage Cables Type XLPE/SWA/PVC 0...

Charles Endirect Street Lighting Equipment

Centriforce Utility Protection Brochure

Street Lighting Polypipe Cable Duct

Quicki straight & branch gel joint

Polypipe Cable Ducting - Gas Pipe Ducting

Zero Halogen Heat Shrink 120mm-40mm - W3 NH 120/40

Pfisterer Sicon High Voltage Mechanical Shearbolt Connectors

LUL Compliant Optical Fibre 48 Way IP67 Splice Enclosures

Platinum Tools 15001C Data Sheet

LappTannehill-Automotive-forWeb

Anderton Ander-Fin Cable Theft Deterrent - Brochure

Ds wbf6 24-series

Viewers also liked

Heat Shrink Cable Glands - Shrink Polymer Systems

Thorne & Derrick International

CMP Zen High Voltage Cable Glands - CMP Zen Insulated Cable Glands

Thorne & Derrick International

3M Heat Shrink Tubing & Sleeving

Thorne & Derrick International

Raychem Heat Shrink - Raychem Tyco Heat Shrink Tubing And Sleeving

Thorne & Derrick International

3M Cold Shrink QT-III Indoor & Outdoor Cable Terminations Brochure

Thorne & Derrick International

3M Medium Voltage Cable Terminations, 5kV–46kV, 2013 Electrical Product Catal...

Thorne & Derrick International

Heat Shrink Cable Joints & Cable Terminations LV HV, 6.6kV 11kV 33kV - SPS Ca...

Thorne & Derrick International

Viewers also liked (7)

Heat Shrink Cable Glands - Shrink Polymer Systems

CMP Zen High Voltage Cable Glands - CMP Zen Insulated Cable Glands

3M Heat Shrink Tubing & Sleeving

Raychem Heat Shrink - Raychem Tyco Heat Shrink Tubing And Sleeving

3M Cold Shrink QT-III Indoor & Outdoor Cable Terminations Brochure

3M Medium Voltage Cable Terminations, 5kV–46kV, 2013 Electrical Product Catal...

Heat Shrink Cable Joints & Cable Terminations LV HV, 6.6kV 11kV 33kV - SPS Ca...

Similar to SPS Heat Shrink Cable Glands, HCS1, 4-12mm

SPS Heat Shrink Joints to Suit Low Voltage Cables 0.6/3.3kV

Thorne & Derrick International

Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kV

Thorne & Derrick International

Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...

Thorne & Derrick International

Prysmian Cable Cleats - Bicon Multicleats & Bicon Multistraps (Stainless Steel)

Thorne & Derrick International

Prysmian BICON Multistrap * Prysmian BICON multistraps are cable straps complete with a tensioning clip, securing pin and winding key all made from high corrosion resistant non-magnetic stainless steel * Multistraps are cable straps used an an intermediate restraint between Multicleat cable cleats * Multistraps can be used to bind cables together Prysmian BICON Multistraps can be supplied in 2 strengths - i) standard duty designed to have 2 loops of 0.38mm thick cable strap around the LV-HV cables, ii) heavy duty designed to have 3 loops of 0.38mm thick cable strap around the LV-HV cables.

Prysmian Cable Support & Fixing System Catalogue - Prysmian Group (Bicon) Cab...

Thorne & Derrick International

3M 8425-8 Cold Shrink Tube

Thorne & Derrick International

3M Cold Shrink Tube 8425-83M 8425-8 Cold Shrink Tube Cold Shrink Tube Min Diameter 10.2mm Cold Shrink Tube Max Diameter 20.8mm Cold Shrink Tube Length 203mm 3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core. •Cold shrink provides a constant radial pressure seal •No heat required with 3M Cold Shrink - 100% cold applied •No specialist cable jointing or heat shrink tools required •Quality - long term reliability •Moisture resistant for submersible and outdoor applications 3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.

3M 8423-6 Cold Shrink Tube

Thorne & Derrick International

3M 8428-18 Cold Shrink Tube

Thorne & Derrick International

3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables 3M Cold Shrink Tube 8428-183M 8428-18 Cold Shrink Tube Cold Shrink Tube Min Diameter 24.0mm Cold Shrink Tube Max Diameter 49.3mm Cold Shrink Tube Length 457mm 3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core. •Cold shrink provides a constant radial pressure seal •No heat required with 3M Cold Shrink - 100% cold applied •No specialist cable jointing or heat shrink tools required •Quality - long term reliability •Moisture resistant for submersible and outdoor applications 3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.

3M 8429-12 Cold Shrink Tube

Thorne & Derrick International

3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables 3M Cold Shrink Tube 8429-123M 8429-12 Cold Shrink Tube Cold Shrink Tube Min Diameter 32.2mm Cold Shrink Tube Max Diameter 67.8mm Cold Shrink Tube Length 305mm 3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core. •Cold shrink provides a constant radial pressure seal •No heat required with 3M Cold Shrink - 100% cold applied •No specialist cable jointing or heat shrink tools required •Quality - long term reliability •Moisture resistant for submersible and outdoor applications 3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors

3M 8429-6 Cold Shrink Tube

Thorne & Derrick International

3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables 3M Cold Shrink Tube 8429-63M 8429-6 Cold Shrink Tube Cold Shrink Tube Min Diameter 32.2mm Cold Shrink Tube Max Diameter 67.8mm Cold Shrink Tube Length 152mm 3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core. •Cold shrink provides a constant radial pressure seal •No heat required with 3M Cold Shrink - 100% cold applied •No specialist cable jointing or heat shrink tools required •Quality - long term reliability •Moisture resistant for submersible and outdoor applications 3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.

3M 8429-18 Cold Shrink Tube

Thorne & Derrick International

3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables 3M Cold Shrink Tube 8429-123M 8429-18 Cold Shrink Tube Cold Shrink Tube Min Diameter 32.2mm Cold Shrink Tube Max Diameter 67.8mm Cold Shrink Tube Length 457mm 3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core. •Cold shrink provides a constant radial pressure seal •No heat required with 3M Cold Shrink - 100% cold applied •No specialist cable jointing or heat shrink tools required •Quality - long term reliability •Moisture resistant for submersible and outdoor applications 3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.

3M 8430-18 Cold Shrink Tube

Thorne & Derrick International

3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables 3M Cold Shrink Tube 8430-9 Cold Shrink Tube Min Diameter 42.6mm Cold Shrink Tube Max Diameter 93.7mm Cold Shrink Tube Length 229mm 3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core. •Cold shrink provides a constant radial pressure seal •No heat required with 3M Cold Shrink - 100% cold applied •No specialist cable jointing or heat shrink tools required •Quality - long term reliability •Moisture resistant for submersible and outdoor applications 3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.

3M 8427-16 Cold Shrink Tube

Thorne & Derrick International

3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables 3M Cold Shrink Tube 8427-163M 8427-16 Cold Shrink Tube Cold Shrink Tube Min Diameter 17.5mm Cold Shrink Tube Max Diameter 33.0mm Cold Shrink Tube Length 406mm 3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core. •Cold shrink provides a constant radial pressure seal •No heat required with 3M Cold Shrink - 100% cold applied •No specialist cable jointing or heat shrink tools required •Quality - long term reliability •Moisture resistant for submersible and outdoor applications 3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.

3M 8428-24 Cold Shrink Tube

Thorne & Derrick International

3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables 3M Cold Shrink Tube 8428-243M 8428-24 Cold Shrink Tube Cold Shrink Tube Min Diameter 24.0mm Cold Shrink Tube Max Diameter 49.3mm Cold Shrink Tube Length 609mm 3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core. •Cold shrink provides a constant radial pressure seal •No heat required with 3M Cold Shrink - 100% cold applied •No specialist cable jointing or heat shrink tools required •Quality - long term reliability •Moisture resistant for submersible and outdoor applications 3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.

3M 8426-9 Cold Shrink TubeThorne & Derrick International

3M 8429-9 Cold Shrink Tube

Thorne & Derrick International

3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables 3M Cold Shrink Tube 8429-93M 8429-9 Cold Shrink Tube Cold Shrink Tube Min Diameter 32.2mm Cold Shrink Tube Max Diameter 67.8mm Cold Shrink Tube Length 229mm 3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core. •Cold shrink provides a constant radial pressure seal •No heat required with 3M Cold Shrink - 100% cold applied •No specialist cable jointing or heat shrink tools required •Quality - long term reliability •Moisture resistant for submersible and outdoor applications 3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.

3M 8428-12 Cold Shrink Tube

Thorne & Derrick International

3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables 3M Cold Shrink Tube 8428-123M 8428-12 Cold Shrink Tube Cold Shrink Tube Min Diameter 24.0mm Cold Shrink Tube Max Diameter 49.3mm Cold Shrink Tube Length 305mm 3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core. •Cold shrink provides a constant radial pressure seal •No heat required with 3M Cold Shrink - 100% cold applied •No specialist cable jointing or heat shrink tools required •Quality - long term reliability •Moisture resistant for submersible and outdoor applications 3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.

3M 8428-6 Cold Shrink Tube

Thorne & Derrick International

3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables 3M Cold Shrink Tube 8428-63M 8428-6 Cold Shrink Tube Cold Shrink Tube Min Diameter 24.0mm Cold Shrink Tube Max Diameter 49.3mm Cold Shrink Tube Length 152mm 3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core. •Cold shrink provides a constant radial pressure seal •No heat required with 3M Cold Shrink - 100% cold applied •No specialist cable jointing or heat shrink tools required •Quality - long term reliability •Moisture resistant for submersible and outdoor applications 3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.

3M 8427-6 Cold Shrink Tube

Thorne & Derrick International

3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables 3M Cold Shrink Tube 8427-63M 8427-6 Cold Shrink Tube Cold Shrink Tube Min Diameter 17.5mm Cold Shrink Tube Max Diameter 33.0mm Cold Shrink Tube Length 152mm 3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core. •Cold shrink provides a constant radial pressure seal •No heat required with 3M Cold Shrink - 100% cold applied •No specialist cable jointing or heat shrink tools required •Quality - long term reliability •Moisture resistant for submersible and outdoor applications 3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.

3M 8430-9 Cold Shrink Tube

Thorne & Derrick International

3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables 3M Cold Shrink Tube 8430-93M 8430-9 Cold Shrink Tube Cold Shrink Tube Min Diameter 42.6mm Cold Shrink Tube Max Diameter 93.7mm Cold Shrink Tube Length 229mm 3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core. •Cold shrink provides a constant radial pressure seal •No heat required with 3M Cold Shrink - 100% cold applied •No specialist cable jointing or heat shrink tools required •Quality - long term reliability •Moisture resistant for submersible and outdoor applications 3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.

Similar to SPS Heat Shrink Cable Glands, HCS1, 4-12mm (20)

SPS Heat Shrink Joints to Suit Low Voltage Cables 0.6/3.3kV

Heat Shrink Joints to Suit Low Voltage Cables Type XLPE/SWA/PVC 0.6/3.3kV

Heat Shrink Cable Terminations to suit XLPE & Paper Insulated Lead Covered Ca...

Prysmian Cable Cleats - Bicon Multicleats & Bicon Multistraps (Stainless Steel)

Prysmian Cable Support & Fixing System Catalogue - Prysmian Group (Bicon) Cab...

3M 8425-8 Cold Shrink Tube

3M 8423-6 Cold Shrink Tube

3M 8428-18 Cold Shrink Tube

3M 8429-12 Cold Shrink Tube

3M 8429-6 Cold Shrink Tube

3M 8429-18 Cold Shrink Tube

3M 8430-18 Cold Shrink Tube

3M 8427-16 Cold Shrink Tube

3M 8428-24 Cold Shrink Tube

3M 8426-9 Cold Shrink Tube

3M 8429-9 Cold Shrink Tube

3M 8428-12 Cold Shrink Tube

3M 8428-6 Cold Shrink Tube

3M 8427-6 Cold Shrink Tube

3M 8430-9 Cold Shrink Tube

More from Thorne & Derrick International

Isolation procedures for safe working on electrical systems and equipment by ...

Thorne & Derrick International

Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment. You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically. THE RULES OF SAFE ISOLATION ARE: Obtain permission to start work (a Permit may be required in some situations) Identify the source(s) of supply using an approved voltage indicator or test lamp Prove that the approved voltage indicator or test lamp is functioning correctly Isolate the supply(s) Secure the isolation Prove the system/equipment is DEAD using an approved voltage indicator or test lamp Prove that the approved voltage indicator or test lamp is functioning correctly Put up warning signs to tell other people that the electrical installation has been isolated Once the system/equipment is proved DEAD, work can begin Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.

THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt

Thorne & Derrick International

The Children North East Annual Golf Day Wednesday 9th May 2018

Thorne & Derrick International

3M Electrical Products Stocked By Thorne & Derrick International

Thorne & Derrick International

CATU Electrical Safety Catalogue

Thorne & Derrick International

11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A

Thorne & Derrick International

THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...

Thorne & Derrick International

THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment. Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST. Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.

Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...

Thorne & Derrick International

Roxtec Cable Transit - B Frame Dimensional Drawing

Thorne & Derrick International

Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe

Thorne & Derrick International

T&D Experts In Equipment For Explosive Atmospheres

Thorne & Derrick International

Ultrasonic Flow Meters - Customer Specification Demand

Thorne & Derrick International

Emtelle Fibre Optic Cables - Product Catalogue 2016

Thorne & Derrick International

Thorne & Derrick Process Heating Brochure 2016

Thorne & Derrick International

SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D

Thorne & Derrick International

Ripley Utility Tool Cable Preparation Tools

Thorne & Derrick International

RIDGID micro CD100 Combustible Gas Detector

Thorne & Derrick International

Itron Fact Sheet

Thorne & Derrick International

United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...

Thorne & Derrick International

Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet

Thorne & Derrick International

More from Thorne & Derrick International (20)

Isolation procedures for safe working on electrical systems and equipment by ...

THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt

The Children North East Annual Golf Day Wednesday 9th May 2018

3M Electrical Products Stocked By Thorne & Derrick International

CATU Electrical Safety Catalogue

11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A

THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...

Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...

Roxtec Cable Transit - B Frame Dimensional Drawing

Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe

T&D Experts In Equipment For Explosive Atmospheres

Ultrasonic Flow Meters - Customer Specification Demand

Emtelle Fibre Optic Cables - Product Catalogue 2016

Thorne & Derrick Process Heating Brochure 2016

SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D

Ripley Utility Tool Cable Preparation Tools

RIDGID micro CD100 Combustible Gas Detector

Itron Fact Sheet

United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...

Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet

Recently uploaded

UiPath Test Automation using UiPath Test Suite series, part 4

DianaGray10

Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap. The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies. Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques What will you get from this session? 1. Insights into SAP testing best practices 2. Heatmap utilization for testing 3. Optimization of testing processes 4. Demo Topics covered: Execution from the test manager Orchestrator execution result Defect reporting SAP heatmap example with demo Speaker: Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP

Assure Contact Center Experiences for Your Customers With ThousandEyes

ThousandEyes

State of ICS and IoT Cyber Threat Landscape Report 2024 preview

Prayukth K V

The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development. The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers: State of global ICS asset and network exposure Sectoral targets and attacks as well as the cost of ransom Global APT activity, AI usage, actor and tactic profiles, and implications Rise in volumes of AI-powered cyberattacks Major cyber events in 2024 Malware and malicious payload trends Cyberattack types and targets Vulnerability exploit attempts on CVEs Attacks on counties – USA Expansion of bot farms – how, where, and why In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East Why are attacks on smart factories rising? Cyber risk predictions Axis of attacks – Europe Systemic attacks in the Middle East Download the full report from here: https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/

Transcript: Selling digital books in 2024: Insights from industry leaders - T...

BookNet Canada

The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more. Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/ Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.

LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...

DanBrown980551

Do you want to learn how to model and simulate an electrical network from scratch in under an hour? Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)! During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook. PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides: - A fully editable and extendable library for grid component modelling; - Visualization tools to display your network; - Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses; The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well. What you will learn during the webinar: - For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills; - For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.

Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf

91mobiles

FIDO Alliance Osaka Seminar: The WebAuthn API and Discoverable Credentials.pdf

FIDO Alliance

Accelerate your Kubernetes clusters with Varnish Caching

Thijs Feryn

When stars align: studies in data quality, knowledge graphs, and machine lear...

Elena Simperl

SAP Sapphire 2024 - ASUG301 building better apps with SAP Fiori.pdf

Peter Spielvogel

Building better applications for business users with SAP Fiori. • What is SAP Fiori and why it matters to you • How a better user experience drives measurable business benefits • How to get started with SAP Fiori today • How SAP Fiori elements accelerates application development • How SAP Build Code includes SAP Fiori tools and other generative artificial intelligence capabilities • How SAP Fiori paves the way for using AI in SAP apps

Elevating Tactical DDD Patterns Through Object Calisthenics

Dorra BARTAGUIZ

After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!

Unsubscribed: Combat Subscription Fatigue With a Membership Mentality by Head...

Product School

Epistemic Interaction - tuning interfaces to provide information for AI support

Alan Dix

Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024 https://alandix.com/academic/papers/synergy2024-epistemic/ As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.

Quantum Computing: Current Landscape and the Future Role of APIs

Vlad Stirbu

GraphRAG is All You need? LLM & Knowledge Graph

Guy Korland

Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs. 1. Unifying Large Language Models and Knowledge Graphs: A Roadmap. https://arxiv.org/abs/2306.08302 2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs: https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/

GenAISummit 2024 May 28 Sri Ambati Keynote: AGI Belongs to The Community in O...

Sri Ambati

Elizabeth Buie - Older adults: Are we really designing for our future selves?

Nexer Digital

Secstrike : Reverse Engineering & Pwnable tools for CTF.pptx

nkrafacyberclub

FIDO Alliance Osaka Seminar: Passkeys at Amazon.pdf

FIDO Alliance

FIDO Alliance Osaka Seminar: Overview.pdf

FIDO Alliance

Recently uploaded (20)

UiPath Test Automation using UiPath Test Suite series, part 4

Assure Contact Center Experiences for Your Customers With ThousandEyes

State of ICS and IoT Cyber Threat Landscape Report 2024 preview

Transcript: Selling digital books in 2024: Insights from industry leaders - T...

LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...

Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf

FIDO Alliance Osaka Seminar: The WebAuthn API and Discoverable Credentials.pdf

Accelerate your Kubernetes clusters with Varnish Caching

When stars align: studies in data quality, knowledge graphs, and machine lear...

SAP Sapphire 2024 - ASUG301 building better apps with SAP Fiori.pdf

Elevating Tactical DDD Patterns Through Object Calisthenics

Unsubscribed: Combat Subscription Fatigue With a Membership Mentality by Head...

Epistemic Interaction - tuning interfaces to provide information for AI support

Quantum Computing: Current Landscape and the Future Role of APIs

GraphRAG is All You need? LLM & Knowledge Graph

GenAISummit 2024 May 28 Sri Ambati Keynote: AGI Belongs to The Community in O...

Elizabeth Buie - Older adults: Are we really designing for our future selves?

Secstrike : Reverse Engineering & Pwnable tools for CTF.pptx

FIDO Alliance Osaka Seminar: Passkeys at Amazon.pdf

FIDO Alliance Osaka Seminar: Overview.pdf

SPS Heat Shrink Cable Glands, HCS1, 4-12mm

1. Unit E3, Crown Way, Crown Park Industrial Estate, Rushden, Northants, UK, NN10 6FD Tel: +44 (0)1933 356758 Fax: +44 (0)1933 413821 Email: info@shrinkpolymersystems.co.uk Skype: shrinkpolymersystems www.shrinkpolymersystems.co.uk 50 Heat Shrink Cable Entry Glands • Six sizes cover cable diameters from 4mm through to 70mm • Provides a watertight seal and secure fixing to gland plate/box • Ideal for non armoured (except PICAS) power or fibre optic cables • Approved and used by various UK regional electricity companies for use on 95-300mm² 11kV PICAS cables • Flame retardant The HCS series of heat shrinkable cable entry glands were developed to provide a cost effective method of providing a weatherproof seal on a wide variety of cables. The glands are manufactured in accordance with MIL-1- 81765/1 and MIL-1-23053/15 specifications and provide a flame retarded adhesive lined body along with a male threaded part to enable fixture to the gland plate. The range comprises six different sizes as detailed below. Ref No Cable O/D max Cable O/D min Bulkhead Thickness Max Length Rec Drill Hole HCS 1 12mm 4mm 6mm 95mm 26mm HCS 2 17mm 7mm 6mm 95mm 26mm HCS 3 26mm 13mm 6mm 100mm 35mm HCS 4 38mm 19mm 6mm 130mm 51mm HCS 4s 53mm 19mm 10mm 170mm 60mm HCS 5 70mm 36mm 6mm 200mm 88mm

SPS Heat Shrink Cable Glands, HCS1, 4-12mm

Recommended

Recommended

More Related Content

What's hot

What's hot (13)

Viewers also liked

Viewers also liked (7)

Similar to SPS Heat Shrink Cable Glands, HCS1, 4-12mm

Similar to SPS Heat Shrink Cable Glands, HCS1, 4-12mm (20)

More from Thorne & Derrick International

More from Thorne & Derrick International (20)

Recently uploaded

Recently uploaded (20)

SPS Heat Shrink Cable Glands, HCS1, 4-12mm