Industrial ovens can be used for a variety of applications including baking, heat treating, and sterilizing. They generally operate below 600 degrees Celsius. Industrial ovens are either batch ovens, which process items in discrete batches, or conveyor ovens, which provide continuous high-volume processing. Batch ovens offer flexibility while conveyor ovens are more efficient for high production. AGNEE Engineering designs and manufactures various types of industrial ovens and dryers for different applications and industries.

1. INDUSTRIAL OVENS & DRYERS
AGNEE Industrial Ovens are used in a wide range of applications including aging, baking,
finishing, heat treating, annealing,melting, powder coating , research and development, sterilizing and testing.
Industrial ovens generally operate at less than 600 deg C .
TYPES OF INDUSTRIAL OVENSI
Industrial ovens can be classified into two basic groups; batch ovens and conveyor ovens
Batch industrial ovens are designed to be utilized in processes where throughput is unitized in "batches", whereas
conveyor industrial ovens are generally utilized in a continuous process. Industrial batch ovens offer the flexibility of
intermittent product flow, with the ability to start and stop production as required. Industrial batch ovens also offer the
flexibility of processing a single large parts, or a significant number of smaller parts in a single process run. However,
there is a throughput volume where the batch process becomes less economical than the conveyor process. Bench
and cabinet industrial ovens are used for small batch production requirements, whereas walk-in industrial ovens are
used for large batch production requirements.
Conveyor industrial ovens offer the ability to handle high production runs while minimizing product staging and
handling. However, the conveyor type process has product size/shape restrictions compared to the batch oven
process. Conveyor industrial ovens can be further categorized as automatic or manual. High volume throughputs are
generally conveyed in an automatic fashion with an adjustable product feed rate, whereas low volume throughputs are
generally conveyed in a manual fashion.
Top to bottom vertical airflow and accommodates virtually any load without restricting air passage. Work can be shelf
loaded or placed directly on the optional reinforced workspace bottom. Side mounted control panel minimizes floor
space required. Designed for Drying, Pre-Heating or any application where a dependable source of heated air up to
450 deg C is required. Gas electric or steam heating .M.S. exterior with powder coated or painted. M.S. or SS
interior .High density glass wool insulation. High pressure recirculating blower. Adjustable fresh air & exhaust dampers
.
·
·
x
Control Panel
drying, preheating, curing,
Industrial Heavy Duty Ovens
· Digital Timing System, incorporated into standard temperature controller, 99 hours 59 minute range, starts
timing when temperature reaches set point and shut down oven at end of set time.
· Batch Timer, for uniformly timing batch operation, continuous alarm with door interlock, alarms at end of
preset time period unit door is opened or timer reset. 1, 5, 10 or 30 hr. range.
· Automatic Door switch turns off blower & heat when door is opened. Restores blower & heat when door is close
· Re circulating blower air flow safety switch
· Digital indicating, thermocouple actuated standard controller Programmable Temperature Controller,
microprocessor based also offered

2. CONTINUOUS CONVEYOR OVENS
PROCESS DRYERS
DRUM // BARREL HEATING OVENS
Continuous ovens (also called conveyor ovens) are well suited for
high volume processing within a tightly controlled temperature range.
Continuous ovens can be used for baking , curing, foundry core
drying, aluminum aging, thermal degassing, annealing, tempering etc
Continuous ovens can often be interfaced with upstream and
downstream equipment to provide a highly efficient, fully automated
process.
Features:
# Single zone or with multiple zones
# Can include end-of-line product cooling
# Electric and gas heating
# Airflow options include top-down, bottom-up and combination
airflow
# Variable Drive Speed - controls the product residence time
accurately.
speeds from 1.5 to 4.5 metres /min
# Conveyor types- flat wire, slat and fiberglass belting.
# Hygienic Design - achieved through ample access doors for
cleaning &
maintenance together with stainless steel contact parts
# Efficient Design - has been achieved by the re-use of air. Lower air
velocities can be used to minimize product damage
Process dryers are used to remove liquids or moisture from bulk
solids, powders, parts, continuous sheets or other liquids by
evaporation .
Dryers can be broken up into two main types: direct and indirect.
Direct dryers convectively heat a product through direct contact with
heated air, gas or a combusted gas product. Indirect dryers
conductively heat a product through contact with a heated wall.
AGNEE ENGINEERING is known for problem solving ingenuity
coupled with high quality design and manufacturing of customizable
equipment
Agnee Engineering design and build a range of process dryers
including Dehydrators De-watering Dryers , High Speed Suction
Dryers ,Pre-dryers for the food industry, Single Conveyor Dryer,
Multi-Stage Single Conveyor Dryer, Multiple Conveyor Dryer
AGNEE ENGINEERING have designed and manufactured
ovens to pre-heat raw materials they receive in Barrels, Drums ,
IBC's ( Industrial Bulk Containers). These ovens heat and or melt
chemicals in mild steel barrels for easier dispensing in the
manufacturing process . Agnee Barrel /Drum Heating ovens can be
electrical , gas or steam heated.
Features:
# Internal protection from fork truck loading
# Heavy gauge plate roof / floor to each oven.
# Specially designed high temperature blowers ensure uniform air
circulation and constant temperature inside the oven
# Insulated floor for energy efficiency
# Drum Revolving mechanism to ensure uniform heat distribution
can be offered with maximum temperature upto 400 deg C
# Both gas-fired models & electrically heated models are offered.

3. Walk-In Ovens are large enclosures used for the process heating
of large objects and in large product quantities. Walk-in ovens
often contain large doorways, cabinets, shelves and racks for
convenience. These can be Gas, Electric, Steam and Hot Water
Dryers. Batch Type And Conveyor Dryers are available. Ideal for
shelf processing applications such as Drying, Dehydrating, Pre-
heating or any other heat processing of large or numerous parts up
to 500 deg C
Features
# Filtered air to remove dust and impurities from entering your
product
# Digital or analog time and temperature controls.
# Audible alarm and lights to indicate any temperature fluctuations.
# Recirculating air systems to save energy costs.
# Exhaust ducts to vent away any fumes
AGNEE Tray Dryer is specially designed for Pharma, Food,
Chemicals, Herbals, Textiles & other industries. It is well
accepted for economical drying of granules, powder , food
material & chemicals.
Fabricated of rigid double mild steel walled panels
insulated with best quality compressed fibre glass and with a
rigid door fitted with secure locking arrangement
Uniform air circulation, controlled temperature, sturdy
construction and large working space are the features of the
oven which is suitably designed to cover wide temperature
range. The loading and unloading is faster and simple. In
higher capacities trays trolley rolls in and out of the chamber.
A control panel is fixed in front of the oven to facilitate easy
operation. Digital temperature controller with digital timer are
supplied in Tray Dryers to facilitate working day and night.
Complete SS 304 or SS 316 in GMP Model are offered.
Agnee Engineering design and build Vacuum Ovens for drying,
degassing and pre-heating applications for heat sensitive and
atmosphere sensitive materials. Vacuum ovens guard against
undesirable effects of heat processes such as oxidation and
contamination.Both production and laboratory vacuum ovens are
offered. Industries served include Medical, Pharmaceutical, Food,
Cosmetics, Chemicals, Electronics , Semiconductor, etc.
Our presence is maintained by developing and continuously
integrating new technologies into our systems for company's that
can not use the industry standard or require heavily automated
production type units. Inert Gas atmosphere vacuum ovens are
also offered.
WALK-IN DRYER / OVEN
TRAY DRYERS
Vacuum Ovens
AGNEE ENGINEERING
26, Godavari, Tungareshwar Indl. Complex 1, Sativali, Vasai-(E), Dist. Thane - 401 202 (Mumbai) ,India
Tele.:+91-0250-248 1421, +91-0250-248 1126 Fax:+91-0250-248 1421
Email: sales@agneeindia.com agneeindia@hotmail.com agneeindia@gmail.com
website: www.agneeindia.com