This project of Maglev windmill on the implementation of an alternate configuration of a wind turbine for power generation purposes. Using the effects of magnetic repulsion, spiral shaped wind turbine blades will be fitted on a rod for stability during rotation and suspended on magnets as a replacement for ball bearings which are normally used on conventional wind turbines. Power will then be generated with an axial flux generator, which incorporates the use of permanent magnets and a set of coils.
Subscribe My Youtube Channel For More Support....
https://www.youtube.com/channel/UCjI2ahxNNvYRc1X5hQIE78A
This is about magnetically levitated maglev windmill.
Subscribe My Youtube Channel For More Support....
https://www.youtube.com/channel/UCjI2ahxNNvYRc1X5hQIE78A
This project of Maglev windmill on the implementation of an alternate configuration of a wind turbine for power generation purposes. Using the effects of magnetic repulsion, spiral shaped wind turbine blades will be fitted on a rod for stability during rotation and suspended on magnets as a replacement for ball bearings which are normally used on conventional wind turbines. Power will then be generated with an axial flux generator, which incorporates the use of permanent magnets and a set of coils.
Subscribe My Youtube Channel For More Support....
https://www.youtube.com/channel/UCjI2ahxNNvYRc1X5hQIE78A
This is about magnetically levitated maglev windmill.
Subscribe My Youtube Channel For More Support....
https://www.youtube.com/channel/UCjI2ahxNNvYRc1X5hQIE78A
These slides use concepts from my (Jeff Funk) course entitled analyzing hi-tech opportunities to analyze how wave energy is becoming more economically feasible. The potential for wave energy is particularly large in northern parts of the Atlantic and Pacific oceans, for example near Canada, the UK, and other parts of Europe. There are a number of emerging designs and these designs benefit from increases in scale. Increasing their scale and other design changes are causing the costs to fall and it is estimated that the cost of electricity from wave energy will fall below that of wind turbines and other sources of clean energy in the near future.
Technical Seminar on Vertical Axis Wind TurbinesShivaling1
An academic technical seminar on the topic of Vertical Axis Wind Turbines, presented in the Final Year Technical Seminar as a requirement for partial fulfillment for the award of BE in Mechanical Engineering, by Visvesvaraya Technological University.
Contents based on an overview of Vertical Axis Wind Turbines, their types, advantages and disadvantages, working principle and Betz's Limit for VAWT
Hybrid wind-solar Power generation systemShivam Joshi
This project is basically based on power generation with help of wind as well as solar equipments. This we call it as Hybrid stucture of solar and wind. The presentation contains all the baci information required to undestand this new innovative concept. For more information you can contact me. I woll get back to you as soon as possible. Thanks you. Hope its helpfull :)
Piezo electric based harvesting is a kind of renewable energy which senses the mechanical vibration into electrical output. In this slide we have study the feasibility of a piezoelectric energy harvester capable to power up low power electronic and electrical circuit.
Lacing in dynamo is made for Revit Modelers who wanted to upgrade their skills and Learners who are interested in Learning Dynamo for Revit in Detail and to be an Expert in the Skills. Give a like and let me know if you found this useful for more leraning sessions like this.
To design a project that could be used to utilize the waste heat energy into electricity for multipurpose use in various applications and household purposes. This system should be economical, easy to implement and does not produce any kind of pollution, it is silent and does not require any kind of fuel to work. The main feature of this project is that it converts direct temperature difference into electricity. It is based upon thermoelectric energy generation concept and has many applications in electricity generation from automobile waste heat, heat liberated from household items, electricity generation from glaciers (ice) and a lot of similar applications where temperature difference from environment is converted into electricity. This concept is very useful in terms that it adds up to other renewable sources of energy and can be used in place of other non-conventional sources of energy like wind, solar, tides, geothermal heat, etc. This is a new concept for electricity generation using temperature difference between junctions of a peltier element to be used in our project. The complete Thermo Electric Generator would be based on Seebeck Effect that is reverse of peltier effect. The thermoelectric effect is the direct conversion of temperature differences to electric voltage and vice-versa
Savonious Wind Turbine with new blade (scoop) designSaiApuroop
This was the new blade design where these blades are used for opening and closing of blades acc to the heavy wind speeds, where these overcomes the damage of blades at heavier wind speeds.
These slides use concepts from my (Jeff Funk) course entitled analyzing hi-tech opportunities to analyze how wave energy is becoming more economically feasible. The potential for wave energy is particularly large in northern parts of the Atlantic and Pacific oceans, for example near Canada, the UK, and other parts of Europe. There are a number of emerging designs and these designs benefit from increases in scale. Increasing their scale and other design changes are causing the costs to fall and it is estimated that the cost of electricity from wave energy will fall below that of wind turbines and other sources of clean energy in the near future.
Technical Seminar on Vertical Axis Wind TurbinesShivaling1
An academic technical seminar on the topic of Vertical Axis Wind Turbines, presented in the Final Year Technical Seminar as a requirement for partial fulfillment for the award of BE in Mechanical Engineering, by Visvesvaraya Technological University.
Contents based on an overview of Vertical Axis Wind Turbines, their types, advantages and disadvantages, working principle and Betz's Limit for VAWT
Hybrid wind-solar Power generation systemShivam Joshi
This project is basically based on power generation with help of wind as well as solar equipments. This we call it as Hybrid stucture of solar and wind. The presentation contains all the baci information required to undestand this new innovative concept. For more information you can contact me. I woll get back to you as soon as possible. Thanks you. Hope its helpfull :)
Piezo electric based harvesting is a kind of renewable energy which senses the mechanical vibration into electrical output. In this slide we have study the feasibility of a piezoelectric energy harvester capable to power up low power electronic and electrical circuit.
Lacing in dynamo is made for Revit Modelers who wanted to upgrade their skills and Learners who are interested in Learning Dynamo for Revit in Detail and to be an Expert in the Skills. Give a like and let me know if you found this useful for more leraning sessions like this.
To design a project that could be used to utilize the waste heat energy into electricity for multipurpose use in various applications and household purposes. This system should be economical, easy to implement and does not produce any kind of pollution, it is silent and does not require any kind of fuel to work. The main feature of this project is that it converts direct temperature difference into electricity. It is based upon thermoelectric energy generation concept and has many applications in electricity generation from automobile waste heat, heat liberated from household items, electricity generation from glaciers (ice) and a lot of similar applications where temperature difference from environment is converted into electricity. This concept is very useful in terms that it adds up to other renewable sources of energy and can be used in place of other non-conventional sources of energy like wind, solar, tides, geothermal heat, etc. This is a new concept for electricity generation using temperature difference between junctions of a peltier element to be used in our project. The complete Thermo Electric Generator would be based on Seebeck Effect that is reverse of peltier effect. The thermoelectric effect is the direct conversion of temperature differences to electric voltage and vice-versa
Savonious Wind Turbine with new blade (scoop) designSaiApuroop
This was the new blade design where these blades are used for opening and closing of blades acc to the heavy wind speeds, where these overcomes the damage of blades at heavier wind speeds.
Fabrication of Advanced Hybrid Savonius Wind TurbineDigvijay Gabhane
As indicated by most recent situation about the water issue additionally everyday expanded necessity power mulled over here chose to create such kind framework that, this framework can ready to chip away at non-customary fuel source. As indicated by topographical designs taken into vision, at each spot there is accessibility of Non-regular fuel source with distinctive extent so here we have chosen to make such a framework which can be put anyplace and can have the option to work at any extent of non-regular fuel source. This framework can create yield in excess of 20 watts over a solitary generator. At last, this framework utilizes 8 unique generators so that, this framework can produce most extreme yield and it relies upon RPM of turbine. The assembling of framework is such a way that, with the base pivot of Turbine, the generator can turn with most extreme RPM. This can be conceivable with the utilization of stuff box plan and related gathering. This total framework is half breed framework that implies it tends to be utilized to work on any sort of fuel source, i.e., wind speed and Water power
Feasibility Assessment: Proposed B.C. LNG Facilities and Renewable PowerClean Energy Canada
Navius Research Inc. and Steve Davis & Associates produced a conceptual design for powering the LNG terminal on the North Coast that would maximize renewables at its production facility and do so reliably, affordably and on schedule—using established commercial technologies. Further, doing so reduces that plant’s carbon pollution by 45 percent, its air emissions - nitrogen oxides - by 70 percent and increases local permanent jobs by 40 percent. The cost for all these benefits? A 1 percent increase in projected sales price of the LNG.
Show and Tell - Renewable Energy integration and Circular Economy.pdfSIFOfgem
This is the sixth in a series of 'Show and Tell' webinars from the Ofgem Strategic Innovation Fund Discovery phase, covering new technology developments for Renewable Energy integration and Circular economy for resource efficiency projects.
The energy system is made up of a complex range of activity across networks, markets, supply, and demand. A range of organisations play crucial roles in managing various parts of this system. Working across traditional boundaries can create opportunities for better integration of services to consumers, who typically experience the system as a whole. Innovative whole system solutions are required to optimise the system, reducing costs whilst enhancing the experience of consumers.
You will hear from SIF projects looking to increase sources of energy system flexibility, improve resource efficiency and new tech development to support deployment of renewables and end use decarbonisation.
The Strategic Innovation Fund (SIF) is an Ofgem programme managed in partnership with Innovate UK, part of UKRI. The SIF aims to fund network innovation that will contribute to achieving Net Zero rapidly and at lowest cost to consumers, and help transform the UK into the ‘Silicon Valley’ of energy, making it the best place for high-potential businesses to grow and scale in the energy market.
For more information on the SIF visit: www.ofgem.gov.uk/sif
Or sign-up for our newsletter here: https://ukri.innovateuk.org/ofgem-sif-subscription-sign-up
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
3. INTRODUCTION
• This project is to design and manufacturing of a Vertical Axis Wind
Turbines (VAWT).
• To transfer the wind speed to a rotational motion using VAWT.
• These turbines will be attached to a manufactured tree that will look
like a Modern Wind Tree Turbine.(MWTT)
• Low wind speed (4.5 - 9 m/s) start-up, working with any wind
direction
• An actual of gained power is reported to be 31-35% relative to the
theoretical gained power due to the instability and inefficient
of the wind speed.
19-10-2022 3
4. OBJECTIVE
19-10-2022 4
• Learn about wind energy and different ways of convert to a
useful power.
• Design & Manufacture light weight wind tree turbine.
• To gain maximum power from wind and utilize wherever it is
applicable.
5. LITERATURE SURVEY
Sr.
no
Name of all authors Journal/book/
article details(name
,volume,page
number)
Year of
Publication
Outcome of the work
1 • Dr Gopinath
• B Sowndarya
• NandhiniPriya
Wind Tree Turbine
Energy Conversion
System(Vol. 6, Issue
3)
MAY 2020 Wind energy was used to generate electricity by
using aero leaves.
2 • Sri Ragunath
• JitendraPandey
Low Speed Wind
Turbines for Power
Generation
MAY2019 Wind energy rotatesthe aero leaves turbines and
thus the energy is generated. The aero leaves
turbine was unaffected by the rate of flow of wind.
19-10-2022 5
6. 3 • Shaikh Mehfuz
• Siddiqui Fateh
• Mohammed Anees
Study of
Application of
Aero-Leaf
Wind Turbine(Vo
lume: 07 Issue:
07)
July 2020 It explains to explain in detail
about all the parametersinvolved
in an efficient aero-leaf
wind turbine to generate
electricity in public spaces.
19-10-2022 6
13. VISUALS
SR NO PARTS FUNCTION
1 ELECTICAL GENERATOR Converting the rotating speed to an electrical power
2 TURBINE CONTROLLER Controlling the speed of the turbine
3 BATTERY Used to store the power and release it when it is needed
4 FUSE It stops the flow of electrical current when it is overloaded
5 CONVERTER Converting DC current TO AC current
6 CONSUMPTION READING Reading the battery percentage
19-10-2022 13
14. CONCLUSIONS
• This Project highlights the topic for Proper framework and design of aero
leaves.
• We can generate a good amount of electricity and this will help to
reduce load on main supply division and save money.
• The idea of making use of which is already is use instead of occupying
new space will help the city or urban areas in future.
19-10-2022 14
