Accendo GloGreen Digital HID (DHID) Ballast B50W-240M Electrical Test Report
•
0 likes•167 views
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory. The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.
Report
Share
Report
Share
Download to read offline
Recommended
Accendo GloGreen Digital HID (DHID) Ballast B100W-240M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B100W-240M Electrical Test ReportAccendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.Accendo GloGreen Digital HID (DHID) Ballast B600W-240M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B600W-240M Electrical Test ReportAccendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.Accendo GloGreen Digital HID (DHID) Ballast B70W-240M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B70W-240M Electrical Test ReportAccendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.Accendo GloGreen Digital HID (DHID) Ballast B200/250W-240M Electrical Test Re...
Accendo GloGreen Digital HID (DHID) Ballast B200/250W-240M Electrical Test Re...Accendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.Accendo GloGreen Digital HID (DHID) Ballast B150W-347M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B150W-347M Electrical Test ReportAccendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.Accendo GloGreen Digital HID (DHID) Ballast B100W-277M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B100W-277M Electrical Test ReportAccendo Electronics Ltd.
This test report summarizes the results of testing a B100W-277M digital ballast. The ballast operated within specifications for input power, current, power factor, total harmonic distortion, and inrush current when tested at 277V and 50/60Hz. Output performance met standards for operational frequency, open-circuit power, supply voltage, and pulse voltage. The ballast started lamps within 1-20 minutes and maintained output power within specifications. After aging for 12 hours at 40°C/104°F and 70°C/158°F, the ballast passed safety tests for grounding and dielectric voltage. Physical dimensions and other characteristics are also listed.Accendo GloGreen Digital HID (DHID) Ballast B150W-240M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B150W-240M Electrical Test ReportAccendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.Accendo GloGreen Digital HID (DHID) Ballast B575W-347M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B575W-347M Electrical Test ReportAccendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.Recommended
Accendo GloGreen Digital HID (DHID) Ballast B100W-240M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B100W-240M Electrical Test ReportAccendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.Accendo GloGreen Digital HID (DHID) Ballast B600W-240M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B600W-240M Electrical Test ReportAccendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.Accendo GloGreen Digital HID (DHID) Ballast B70W-240M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B70W-240M Electrical Test ReportAccendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.Accendo GloGreen Digital HID (DHID) Ballast B200/250W-240M Electrical Test Re...
Accendo GloGreen Digital HID (DHID) Ballast B200/250W-240M Electrical Test Re...Accendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.Accendo GloGreen Digital HID (DHID) Ballast B150W-347M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B150W-347M Electrical Test ReportAccendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.Accendo GloGreen Digital HID (DHID) Ballast B100W-277M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B100W-277M Electrical Test ReportAccendo Electronics Ltd.
This test report summarizes the results of testing a B100W-277M digital ballast. The ballast operated within specifications for input power, current, power factor, total harmonic distortion, and inrush current when tested at 277V and 50/60Hz. Output performance met standards for operational frequency, open-circuit power, supply voltage, and pulse voltage. The ballast started lamps within 1-20 minutes and maintained output power within specifications. After aging for 12 hours at 40°C/104°F and 70°C/158°F, the ballast passed safety tests for grounding and dielectric voltage. Physical dimensions and other characteristics are also listed.Accendo GloGreen Digital HID (DHID) Ballast B150W-240M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B150W-240M Electrical Test ReportAccendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.Accendo GloGreen Digital HID (DHID) Ballast B575W-347M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B575W-347M Electrical Test ReportAccendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.Accendo GloGreen Digital HID (DHID) Ballast B600W-277M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B600W-277M Electrical Test ReportAccendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.Az273 053-52-american-zettler-datasheet-110398
This document provides specifications for a miniature power relay, including its electrical ratings, coil power, temperature rise, life expectancy, dielectric strength, and other performance characteristics. The relay has a DPDT (double pole, double throw) contact arrangement and can switch up to 10 amps of current at voltages up to 150VDC or 400VAC. It is available with standard or sensitive coils and has been approved to various international electrical standards. Dimensional drawings and ordering information are also included.
Motorcycle Projector HeadlightH6054M
This document provides information on a motorcycle projector headlight that uses HID bulb technology. It includes specifications on the 7-inch by 6-inch headlight unit, included 35W HID bulb and ballast, and plug and wiring options. Technical specifications are provided for the 35W and 50W HID bulbs and slim ballasts. The headlight is available in chrome or black and can fit various motorcycle models that use a 200mm round headlight.
Dzm5 72
This document provides information about solar photovoltaic modules manufactured by DZ Solar. It describes the module characteristics including highly efficient silicon solar cells, tempered glass, a junction box with bypass diode, and durability in harsh weather. It also lists the mechanical and electrical parameters of the DZM5 module series, including dimensions, weight, voltage, current ratings, power tolerances, and a 5-year product warranty with 10-25 year performance warranty. Contact information is provided for Wuxi Better Solar New Energy Technology Co., the manufacturer.
Vactrol
This document provides specifications for the NSL-32SR2 optocoupler from Silonex. Key details include:
- It is a compact, moisture resistant optocoupler with a low on resistance, very low LED current, and passive resistance output.
- Maximum ratings include a storage temperature of -40 to +75°C, operating temperature of -40 to +75°C, and isolation voltage of 2000V.
- Electrical characteristics at 25°C include a typical on resistance of 40Ω at 20mA LED current, off resistance of 1-5MΩ, rise time of 5ms, and decay time of 80ms.
Kikusui Kes7000 Transient Immunity Tester / Voltage Variation Simulator denkei
Kikusui Kes7000 Transient Immunity Tester / Voltage Variation Simulator denkeiNIHON DENKEI SINGAPORE
The KES7000 conductive immunity test system complies with ISO7637, which is one of an EMC test standards for automotive electronics. This system consists of the KES7700 Series transient immunity tester, KES7400 Series supply voltage variations tester, and KES7100 application software dedicated to the KES7000 system. This product configuration supports JASO standards and the specific test requirements of various auto makers with options or custom orders.
Increasing importance of EMC tests for automotive electronics
Today, automobiles need to satisfy more strict social requirements of the environmental performance (e.g., improved fuel efficiency and measures for exhaust gas) and safety (e.g., on-board safety devices) as well as usability (e.g., driveability and comfort). It is immeasurable how much electronics are contributing to solutions of those requirements, and electronics is taking on more importance in the future.
Electronics has come into wide use not only in the automobile industry but also various other industries and our daily life. In particular, electronics has become widespread in the field of information communication in recent years. However, on the other hand, the widespread of electronics is yielding environments where electromagnetic waves are emitted around, and this may possibly cause confusion of telecommunication, bad influence on health, and other new misgivings. Therefore, automobile on-board electronic devices now need to be produced so that they have no unnecessary electromagnetic wave emission and are tolerant of electromagnetic waves, and the EMC tests are taking on more importance to satisfy those needs.Fairchild semiconductor hgtg30n60a4d 320413
This document provides specifications for the HGTG30N60A4D, a 600V, SMPS series N-channel IGBT with an anti-parallel hyperfast diode. The IGBT combines the high input impedance of a MOSFET and the low on-state conduction loss of a bipolar transistor. It is optimized for high frequency switch mode power supplies up to 200kHz and has low conduction losses, making it suitable for applications requiring efficient high voltage switching. The document includes maximum ratings, electrical specifications, and typical performance curves characterizing the device.
Catalog Relay Idec - Beeteco.com
Catalog Relay Idec
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Ca07 kad series manufacture by Megaelectronics
Megaelectronics supplies different types of converters. 7Watt AC/DC converter, universal input, 1.5kV isolation, regulated, short circuit protected, unpotted, dual output, DIP. More information visit us: http://www.megaelectronics.com/dc-dc-ac-dc-converters.aspx
Original Opto NEC2561 PS2561 2561 DIP-4 New
This data sheet provides specifications for Sharp PS2561 series optocouplers, including the PS2561-1, -2, PS2561L-1, -2 models. It summarizes key features such as high isolation voltage up to 5,000 Vrms, high current transfer ratio up to 200%, and packaging options of DIP or surface mount. Electrical characteristics including voltage and current ratings, as well as typical performance curves are shown. Ordering information and diagrams of the package dimensions and tape specifications are also included.
Dc circuit-breaker
The JB is a DC circuit breaker dedicated to multi string photovoltaic installations. This circuit breaker is designed to protect the cables located between each string of photovoltaic modules and the photovoltaic inverter against overloads and short circuits.
Solarsoul Solar Modules
Global Photovoltaic Technology Co., Ltd is a 250 MW solar module manufacturer that produces monocrystalline and polycrystalline modules in 190W, 250W and 300W varieties that are TUV and UL certified. It has an R&D team with 30 years of experience, conducts in-house reliability testing, and offers a warranty backed by its parent company's $1 billion in assets and 11 subsidiaries.
Victron Power Backup Systems
The document provides product specifications for Victron inverters/chargers including the MultiPlus line. It lists various models that operate at 12V and 24V with different continuous output power ratings ranging from 800VA to 5000VA. Key specifications covered include input/output voltage ranges, charging voltages, transfer switch amperage, parallel and three phase operation ability, and enclosure details like dimensions and weight.
Catalogue Timer Idec - Beeteco.com
Catalogue Timer Idec
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Catalog Relay IDEC - www.haophuong.com
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng IDEC IZUMI: đèn báo nút nhấn, relay, timer, PLC, màn hình idec...www.haophuong.com
MKH-60
The MKH 60 is a lightweight short gun microphone with a super-cardioid pickup pattern. It has high sensitivity and directivity for quality recording from a distance. Features include a low self-noise, switchable attenuation, and roll-off and treble emphasis filters. It is rugged and weatherproof for film and reporting use.
20-30 GHz 3 way Power Divider
Panda Microwave offers 50 Ohm 2.92mm-Female 20-30 GHz 3 Way Power Divider. Insertion Loss 1.8dB; Isolation 20dB; Operating Temperature -55 to +105℃.
Quantum devices qm35 spec
The document describes the Quantum Devices QM35 optical encoder. It has a bearingless modular design with resolutions up to 8192 lines per revolution. It features a low-profile assembled height, lock-n-twist assembly, through shaft sizes up to 0.375 inches, and hermetically sealed LED. The encoder provides high performance for OEM applications and various commutation and electrical configuration options.
MKH-20
The MKH 20 is an omni-directional condenser microphone used for recording orchestras and solo instruments. It has a flat frequency response from 12-20,000 Hz and a sensitivity of 25 mV/Pa. Key features include switchable diffuse-field correction, pre-attenuation, and a pressure build-up ring. Accessories include a shock mount, windshield, and table stands.
000406
This document summarizes the specifications of EMR series super miniature capacitors. They are designed for use in devices like VTRs, car radios, micro-cassette recorders, calculators and watches. The capacitors have a voltage range of 6.3-63V, capacitance range of 0.47-220uF, and temperature range of -40-105°C. Additional specifications include capacitance tolerance, leakage current, dissipation factor, impedance ratio, stability at low temperatures, and performance after load life and shelf life tests. Dimension diagrams and maximum ripple current specifications are provided for different capacitor sizes.
PC Board Relays - 26 Series
PC board relays, with a very high dielectric strength of 5000V are the product of user’s choice. Designed in SPDT, DPDT, SPST-NO & DPST-NO the series for direct PC board, Socket and panel socket mounting.
Mean well d-50 dual out
This document provides specifications for 50W dual output switching power supplies models D-50A and D-50B. The power supplies provide 5V and 12V outputs for model A, and 5V and 24V outputs for model B. Key features include overload and overvoltage protections, adjustable output voltages, and 100% full load burn-in testing. The power supplies have efficiencies of around 73% and dimensions of 159mm x 97mm x 38mm.
More Related Content
What's hot
Accendo GloGreen Digital HID (DHID) Ballast B600W-277M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B600W-277M Electrical Test ReportAccendo Electronics Ltd.
Accendo commits to the success of your lighting retrofit/upgrade, or new Green lighting project with high-quality, safety approved products. Accendo products are manufactured to the utmost of quality assurance standards. All GloGreen Series Digital HID (DHID) ballasts undergo a thorough inspection before leaving the factory.
The following are examples of test reports completed for the GloGreen Series 50W, 70W, 150W, 200W/250W, 400W, 575W, 600W, 750W and 1000W DHID ballasts. Each individual GloGreen Series ballast must undergo a burn-in period after final assembly to ensure the DHID ballast is operational at its intended specification. Please note, these tested GloGreen Series ballasts can operate either Metal Halide (MH) or High-Pressure Sodium (HPS) bulbs; as indicated, and with equal energy efficiency.Az273 053-52-american-zettler-datasheet-110398
This document provides specifications for a miniature power relay, including its electrical ratings, coil power, temperature rise, life expectancy, dielectric strength, and other performance characteristics. The relay has a DPDT (double pole, double throw) contact arrangement and can switch up to 10 amps of current at voltages up to 150VDC or 400VAC. It is available with standard or sensitive coils and has been approved to various international electrical standards. Dimensional drawings and ordering information are also included.
Motorcycle Projector HeadlightH6054M
This document provides information on a motorcycle projector headlight that uses HID bulb technology. It includes specifications on the 7-inch by 6-inch headlight unit, included 35W HID bulb and ballast, and plug and wiring options. Technical specifications are provided for the 35W and 50W HID bulbs and slim ballasts. The headlight is available in chrome or black and can fit various motorcycle models that use a 200mm round headlight.
Dzm5 72
This document provides information about solar photovoltaic modules manufactured by DZ Solar. It describes the module characteristics including highly efficient silicon solar cells, tempered glass, a junction box with bypass diode, and durability in harsh weather. It also lists the mechanical and electrical parameters of the DZM5 module series, including dimensions, weight, voltage, current ratings, power tolerances, and a 5-year product warranty with 10-25 year performance warranty. Contact information is provided for Wuxi Better Solar New Energy Technology Co., the manufacturer.
Vactrol
This document provides specifications for the NSL-32SR2 optocoupler from Silonex. Key details include:
- It is a compact, moisture resistant optocoupler with a low on resistance, very low LED current, and passive resistance output.
- Maximum ratings include a storage temperature of -40 to +75°C, operating temperature of -40 to +75°C, and isolation voltage of 2000V.
- Electrical characteristics at 25°C include a typical on resistance of 40Ω at 20mA LED current, off resistance of 1-5MΩ, rise time of 5ms, and decay time of 80ms.
Kikusui Kes7000 Transient Immunity Tester / Voltage Variation Simulator denkei
Kikusui Kes7000 Transient Immunity Tester / Voltage Variation Simulator denkeiNIHON DENKEI SINGAPORE
The KES7000 conductive immunity test system complies with ISO7637, which is one of an EMC test standards for automotive electronics. This system consists of the KES7700 Series transient immunity tester, KES7400 Series supply voltage variations tester, and KES7100 application software dedicated to the KES7000 system. This product configuration supports JASO standards and the specific test requirements of various auto makers with options or custom orders.
Increasing importance of EMC tests for automotive electronics
Today, automobiles need to satisfy more strict social requirements of the environmental performance (e.g., improved fuel efficiency and measures for exhaust gas) and safety (e.g., on-board safety devices) as well as usability (e.g., driveability and comfort). It is immeasurable how much electronics are contributing to solutions of those requirements, and electronics is taking on more importance in the future.
Electronics has come into wide use not only in the automobile industry but also various other industries and our daily life. In particular, electronics has become widespread in the field of information communication in recent years. However, on the other hand, the widespread of electronics is yielding environments where electromagnetic waves are emitted around, and this may possibly cause confusion of telecommunication, bad influence on health, and other new misgivings. Therefore, automobile on-board electronic devices now need to be produced so that they have no unnecessary electromagnetic wave emission and are tolerant of electromagnetic waves, and the EMC tests are taking on more importance to satisfy those needs.Fairchild semiconductor hgtg30n60a4d 320413
This document provides specifications for the HGTG30N60A4D, a 600V, SMPS series N-channel IGBT with an anti-parallel hyperfast diode. The IGBT combines the high input impedance of a MOSFET and the low on-state conduction loss of a bipolar transistor. It is optimized for high frequency switch mode power supplies up to 200kHz and has low conduction losses, making it suitable for applications requiring efficient high voltage switching. The document includes maximum ratings, electrical specifications, and typical performance curves characterizing the device.
Catalog Relay Idec - Beeteco.com
Catalog Relay Idec
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Ca07 kad series manufacture by Megaelectronics
Megaelectronics supplies different types of converters. 7Watt AC/DC converter, universal input, 1.5kV isolation, regulated, short circuit protected, unpotted, dual output, DIP. More information visit us: http://www.megaelectronics.com/dc-dc-ac-dc-converters.aspx
Original Opto NEC2561 PS2561 2561 DIP-4 New
This data sheet provides specifications for Sharp PS2561 series optocouplers, including the PS2561-1, -2, PS2561L-1, -2 models. It summarizes key features such as high isolation voltage up to 5,000 Vrms, high current transfer ratio up to 200%, and packaging options of DIP or surface mount. Electrical characteristics including voltage and current ratings, as well as typical performance curves are shown. Ordering information and diagrams of the package dimensions and tape specifications are also included.
Dc circuit-breaker
The JB is a DC circuit breaker dedicated to multi string photovoltaic installations. This circuit breaker is designed to protect the cables located between each string of photovoltaic modules and the photovoltaic inverter against overloads and short circuits.
Solarsoul Solar Modules
Global Photovoltaic Technology Co., Ltd is a 250 MW solar module manufacturer that produces monocrystalline and polycrystalline modules in 190W, 250W and 300W varieties that are TUV and UL certified. It has an R&D team with 30 years of experience, conducts in-house reliability testing, and offers a warranty backed by its parent company's $1 billion in assets and 11 subsidiaries.
Victron Power Backup Systems
The document provides product specifications for Victron inverters/chargers including the MultiPlus line. It lists various models that operate at 12V and 24V with different continuous output power ratings ranging from 800VA to 5000VA. Key specifications covered include input/output voltage ranges, charging voltages, transfer switch amperage, parallel and three phase operation ability, and enclosure details like dimensions and weight.
Catalogue Timer Idec - Beeteco.com
Catalogue Timer Idec
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Catalog Relay IDEC - www.haophuong.com
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng IDEC IZUMI: đèn báo nút nhấn, relay, timer, PLC, màn hình idec...www.haophuong.com
MKH-60
The MKH 60 is a lightweight short gun microphone with a super-cardioid pickup pattern. It has high sensitivity and directivity for quality recording from a distance. Features include a low self-noise, switchable attenuation, and roll-off and treble emphasis filters. It is rugged and weatherproof for film and reporting use.
20-30 GHz 3 way Power Divider
Panda Microwave offers 50 Ohm 2.92mm-Female 20-30 GHz 3 Way Power Divider. Insertion Loss 1.8dB; Isolation 20dB; Operating Temperature -55 to +105℃.
Quantum devices qm35 spec
The document describes the Quantum Devices QM35 optical encoder. It has a bearingless modular design with resolutions up to 8192 lines per revolution. It features a low-profile assembled height, lock-n-twist assembly, through shaft sizes up to 0.375 inches, and hermetically sealed LED. The encoder provides high performance for OEM applications and various commutation and electrical configuration options.
MKH-20
The MKH 20 is an omni-directional condenser microphone used for recording orchestras and solo instruments. It has a flat frequency response from 12-20,000 Hz and a sensitivity of 25 mV/Pa. Key features include switchable diffuse-field correction, pre-attenuation, and a pressure build-up ring. Accessories include a shock mount, windshield, and table stands.
000406
This document summarizes the specifications of EMR series super miniature capacitors. They are designed for use in devices like VTRs, car radios, micro-cassette recorders, calculators and watches. The capacitors have a voltage range of 6.3-63V, capacitance range of 0.47-220uF, and temperature range of -40-105°C. Additional specifications include capacitance tolerance, leakage current, dissipation factor, impedance ratio, stability at low temperatures, and performance after load life and shelf life tests. Dimension diagrams and maximum ripple current specifications are provided for different capacitor sizes.
What's hot (20)
Accendo GloGreen Digital HID (DHID) Ballast B600W-277M Electrical Test Report
Accendo GloGreen Digital HID (DHID) Ballast B600W-277M Electrical Test Report
Kikusui Kes7000 Transient Immunity Tester / Voltage Variation Simulator denkei
Kikusui Kes7000 Transient Immunity Tester / Voltage Variation Simulator denkei
Similar to Accendo GloGreen Digital HID (DHID) Ballast B50W-240M Electrical Test Report
PC Board Relays - 26 Series
PC board relays, with a very high dielectric strength of 5000V are the product of user’s choice. Designed in SPDT, DPDT, SPST-NO & DPST-NO the series for direct PC board, Socket and panel socket mounting.
Mean well d-50 dual out
This document provides specifications for 50W dual output switching power supplies models D-50A and D-50B. The power supplies provide 5V and 12V outputs for model A, and 5V and 24V outputs for model B. Key features include overload and overvoltage protections, adjustable output voltages, and 100% full load burn-in testing. The power supplies have efficiencies of around 73% and dimensions of 159mm x 97mm x 38mm.
Electronic timer | Electronic Timer Switch-GIC India
GIC Manufactures an assortment of Industrial Electronic Timer Switches, Synchronous Timers, Cyclic Timers, Digital Timers, computerized clock switches, Programmable Timer Switches and programmable clocks at a moderate expense.
EGNC105MK
This document provides information on a 105W GaN-HEMT that operates at high voltages up to 50V and delivers high power and efficiency. Key features include an output power of 51dBm at saturation, 70% drain efficiency, and 20dB power gain. It is well-suited for 0.9GHz LTE applications. Electrical data, reliability estimates through MTTF calculations, ESD ratings, and package details are provided. S-parameter measurement data across frequency is also included for reference.
SPICE MODEL of TPC8018-H (Professional+BDP Model) in SPICE PARK
SPICE MODEL of TPC8018-H (Professional+BDP Model) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
Mean well ad55
This document provides specifications for a 55W 1-2 output DC power supply with battery charging capabilities. It has universal AC input, short circuit, overload, and overvoltage protections. It provides fixed switching frequency at 45kHz and has approvals from various regulatory bodies. It has a case size of 159x97x38mm and includes a 2 year warranty.
Mean well d-30 dual out
The document summarizes a 30W dual output switching power supply. It has two output channels, model D-30A provides 5V and 12V outputs while D-30B provides 5V and 24V outputs. It features protections for short circuits and overloads, uses free air convection for cooling, and has a 1 year warranty.
Delta drp024 power_supply_catalog
This document provides specifications for a 120W DIN rail power supply with the following key details:
- It has a single 120W output with a voltage range of 22-28V and a current of 5A.
- The input voltage range is 85-264VAC. It has protections such as overload, overvoltage, and overtemperature protections.
- Additional features include compact design, easy wire connection, 10 year lifetime, shock/vibration resistance, and convection cooling.
Catv3 Fuente Ferrorresonante Apx
The Alpha APX2 Series is a line of non-standby power supplies designed for indoor and outdoor applications in communication networks. The APX2 provides fully regulated, clean power with surge and short circuit protection through its ferroresonant design. It is available in wall or pole mount models in various output voltages and currents to suit different power needs.
SPICE MODEL of DTA143XUA in SPICE PARK
SPICE MODEL of DTA143XUA in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
Tripath TA2021B
The document provides technical information about the TA2021B, a 25W per channel Class-T digital audio power amplifier integrated circuit from Tripath Technology. Some key details include:
- It uses Tripath's proprietary Digital Power Processing (DPPTM) technology for high efficiency amplification with audiophile quality sound.
- It can provide up to 25W of continuous power per channel into a 4 ohm load, with over 80% efficiency and very low distortion.
- It has a wide dynamic range of 100dB and interfaces designed for use in applications like DVD receivers, PC multimedia systems, and more.
- Electrical characteristics, operating conditions, pin descriptions and other specifications are provided to help
SPICE MODEL of 2SK4078 (Professional+BDP Model) in SPICE PARK
SPICE MODEL of 2SK4078 (Professional+BDP Model) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
Ibeko Eging Series
The document discusses EGing PV modules, which are manufactured using continuous improvement techniques to ensure high quality. EGing modules deliver stable high performance efficiency for a wide variety of applications from small to large solar systems. They provide flexible sizing options, guaranteed power output over 10 and 25 years, and certification for reliability by leading testing institutes.
SPICE MODEL of 2SK4078 (Standard+BDS Model) in SPICE PARK
This document summarizes the modeling parameters and simulation results for a power MOSFET model. It includes:
1) The component modeled is a 2SK4078 power MOSFET from NEC with a standard diode model. Modeling parameters like threshold voltage, transconductance, resistances, and capacitances are provided.
2) Simulation results graph the transconductance, Vgs-Id, Rds(on), gate charge, capacitance, switching time, forward/reverse characteristics and compare to measurement data. Errors are less than 5% for most characteristics.
3) The reverse recovery characteristic of the body diode is also modeled and compared to measurement, with less than 1% error
Sca1000 Fm A0%200 As
The document provides technical specifications and operating instructions for the SCA1000-FM-A0 1000 watt FM amplifier.
Key details include:
- Frequency range of 87.5-108 MHz, with a gain of 30dB and maximum output power of 1000 watts.
- Solid state design in a 5U rackmount cabinet with automatic power and fan fail detection.
- Uses silicon LDMOS technology with an efficiency of 68% and can operate from 0-55°C.
- Modular design allows for easy service access and maintenance.
- Controlled by a PAB series controller with LCD display, keyboard, and optional Ethernet interface.
- Designed to keep broadcasting even in fault conditions
Trmt transducer
This document summarizes a multifunction power transducer model TRMT. It can simultaneously detect and display individual phase voltages, currents, power, frequency, and power factor. It has features like user-settable CT and PT ratios, circuit selection, auto/manual scrolling display, RS-485 communication, analog/digital outputs, and DIN rail or wall mounting. The transducer measures voltage and current with 0.2% accuracy and power parameters with 0.5% accuracy. It is available in different voltage and current input ranges with RS-485 or analog/digital output options.
SPICE MODEL of DTC124EUA in SPICE PARK
SPICE MODEL of DTC124EUA in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
APEC 2010 ACDC Live Demo Tech SessionPresentation_Feb 19 2010
The document describes a 300W AC-DC power supply design using Fairchild semiconductor components. It uses an interleaved boost PFC converter with the FAN9612 controller to regulate the output to 390VDC with over 90% efficiency. A 300W asymmetrical half-bridge DC-DC converter with the FSFA2100 controller then converts the 390VDC to a 12VDC output with over 92% total efficiency. Design waveforms and performance data are provided to show the operation and benefits of the interleaved PFC and DC-DC converter topology.
SPICE MODEL of TPCF8102 (Standard+BDS Model) in SPICE PARK
SPICE MODEL of TPCF8102 (Standard+BDS) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
Datasheet
This document provides information on the UC3844, UC3845, UC2844, and UC2845 high performance current mode controllers, including:
- Operating temperature ranges and packaging for the devices.
- Pin connections and ordering information for the different package types.
- Electrical characteristics like reference voltage, oscillator frequency, error amplifier performance, current sense input, output specifications, and undervoltage lockout thresholds.
- Graphs depicting properties like oscillator frequency vs timing resistor, output deadtime vs frequency, error amplifier gain and phase vs frequency, and more.
- An overview of key features like current mode operation, adjustable output deadtime, compensation, current limiting, undervoltage lockout,
Similar to Accendo GloGreen Digital HID (DHID) Ballast B50W-240M Electrical Test Report (20)
Electronic timer | Electronic Timer Switch-GIC India
Electronic timer | Electronic Timer Switch-GIC India
SPICE MODEL of TPC8018-H (Professional+BDP Model) in SPICE PARK
SPICE MODEL of TPC8018-H (Professional+BDP Model) in SPICE PARK
SPICE MODEL of 2SK4078 (Professional+BDP Model) in SPICE PARK
SPICE MODEL of 2SK4078 (Professional+BDP Model) in SPICE PARK
SPICE MODEL of 2SK4078 (Standard+BDS Model) in SPICE PARK
SPICE MODEL of 2SK4078 (Standard+BDS Model) in SPICE PARK
APEC 2010 ACDC Live Demo Tech SessionPresentation_Feb 19 2010
APEC 2010 ACDC Live Demo Tech SessionPresentation_Feb 19 2010
SPICE MODEL of TPCF8102 (Standard+BDS Model) in SPICE PARK
SPICE MODEL of TPCF8102 (Standard+BDS Model) in SPICE PARK
Recently uploaded
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Recently uploaded (20)
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Accendo GloGreen Digital HID (DHID) Ballast B50W-240M Electrical Test Report
- 1. TEST REPORT B50W-240M Item: B50W-240M PO no.: S201004232 Mains 120-240V, 50/60Hz, 50W Digital Ballast Date: May 24/10 Testing Environment: Lamps: SYLVANIA HPS50W Rel. Humidity: 35% Temperature: 28℃ Conditions: Sample #1 Sample #2 Sample #3 Min Typ Max Operational Performance (V) 108 120-240 265 Operational Safety 102 120-240 276 Mains Frequecy (Hz) 45 60 66 Operation (Input) Input Power (W)＠120V 50 53 55 52 Input Power (W)＠240V -- -- -- 53.7 Power Factor 0.97 0.98 0.99 0.973 Currrent @ 120V 0.41 0.44 0.46 0.418 Currrent @ 240V 0.21 0.22 0.23 0.227 TDH (%) -- 5 15 13.2 Inrush Current @ 120V -- 10 30 <30 Inrush Current @ 240V -- 10 30 <30 Operation (Output) Operational Frequency (kHz) 40 50 60 56.53 Open-Circuit Power (W) -- 0.5 2.5 1.2 Supply Voltage (V) 40 45 50 47.3 Pulse Voltage (KV) 3 3.5 5 3.12 Start Warm Lamp (min) 1 10 20 1 Output Power (W)＠120V 47 49 51.7 47.1 Output Power (W)＠240V -- -- -- 49.5 Safety Aging Hours 12 12 Ta (C/F) 40/104 40/104 Tc (C/F) 70/158 70/158 Grounding 0.5Ω/25A 0.5Ω/25A Dielectric Voltage (V) 1800VAC,1S 1800VAC,1S Physical Data Dimension - Body (mm) 156mm×85mm×52mm Material Aluminum Color White Weight (kg/lbs) 0.955/2.11 Accendo Electronics Ltd., CANADA-US E-mail: info@accendoelectronics.com Website: www.AccendoElectronics.com