SlideShare a Scribd company logo
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-1. Components Layout
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
A7 2018 Block Diagram
AP
LASSEN
TRANCEIVER
S5M925DA02-L630
TX_TR_OUT_B1_2_3_4_66
TX_TR_OUT_B5_8_18_19_20_26_28
TX_TR_OUT_B13
TX_TR_OUT_GSM_HB
VR F_TXLO _1P8, VR F_TRX _1P8, VR F_TX_LO_1P2
VD D_1P8_AP , VR F_TXC O_1P8, VR F_G NSS _1P1
VR F_TX_1P2, VR F_RX _LO_1P2, VR F_RX _1P2
MAIN
FEMID
LMSWKQGS-J79
VRF_MIPI_IO_1P8
VRF_FEM_2P8
MEMORY
KLMBG2JETD-B041: 64GB
KLMDG4UCTA-B041: 128GB
VDD_EMCC_1P8, VDD_EMCC_2P85
EMMC_CMD/CLK/RST_N
EMMC_D[0:7]
EMMC_RCLK
SENSOR
6 Axis Sensor (ACC+GRYO)
LSM6DSL
VDD_SENSOR_IO_1P8
NFC_ANT2
TX_PA_OUT_GSM_HB
VR F_M IPI_IO_1P8, VB AT_RF , VR F_PA M_VC C1
TX_PA_OUT_B1
TX_PA_OUT_B2
TX_PA_OUT_B3
TX_PA_OUT_B8
TX_PA_OUT_B12_17
TX_PA_OUT_B20
TX_PA_OUT_B5_18_19_26
B13
SAW
TRX_B13
B7
SAW
HIGH-BAND
PAM
SKY777 86-11
SP4T
PRX_TR_IN_B5_18_19_26_G850, PRX_TR_IN_B4_66
PRX_TR_IN_B7
RFIC_SPI
NFC_ANT1
DRX
LFEM
SFML7E0H001
COUPLER
DRX_TR_IN_HB
RF
Sw i
tc hes
LB/MBANT
HBANT
SUB ANT
LB/MB/HB
FRONT_CAM
24M
FCA
M_AVDD_2P8, FCA
M_VDDI
O_1P8, FCA
M_DVDD
_1P0
5
VTCAM M IPI 4LANE
VTCAM_AF_EEP_I2C
SENSOR
Magnetic Sensor
YAS539
VDD_SENSOR_IO_1P8
SENSOR
Proxy Sensor
VCN
L366 58M-M3
VDD_SENSOR_IO_1P8
SENSOR_I2C
GYRO_INT, 6AXIS_INT
SENSOR_I2C
PRO XY_I2C
PRO XY_INT
MAIN PMIC
S2MPU08X01-6030
IF PMIC
S2MU005X03
VBU
S_5V_OVP, V_BATTERY, VBA
T, VDD_1P8
USB_AP_D_P/D_N
AP_UART_TXD/RXD, CP_UART_TXD/RXD
IF_PMIC_I2C, FG_I2C/ALERT_N
CAM_TORCH_EN, CAM_FL ASH_EN
BATTERY CON
FG_SENSE_P/N
IF CON
USB_D_P/N
IF_PMIC_ACOK
AUDIO CODEC
OSC
32.768kHz
VBA
T, VDD_MLDO_2P0, VDD_LLDO_1P3
PMIC_AP32K
G3D/MIF/PWR_EN
SPEEDY_PMIC
BOOT_LDO
SOC_PSHOLD
SOC_RESET_N, SOC_WRESET_N
OCP_CPUCL0
CP_PWR_UP
PMIC _ONOB, PMIC_IRQB _N
POWER KEY
POWER_KEY
SPK
AMP
SPK_AMP_I2C
SPK_I2S3
RECEIVER
RCV_P/N
MAIN MIC
MAIN_MIC_P/N
SUB MIC
SUB_MIC_P/N
FB_I2S1, PM_I2S0
EAR CON EAR_OUT_L/R
EAR_MIC_P/N
MOTOR
VDD_MIF_0P8, VDD_CPUCL
0_0P8, VDD_CPUCL
1_0P8, VDD_INT_0P8, VDD_G3D_0P8, VDD_MEM_1P1, VDD_LL
DO_1P3
VDD_MLDO_2P0, VDD_CP_0P8, VDD_ALI
VE_0P8, VDDQ
_MMC_CARD_2P8, VDD_1P8_AP, VDDQ
_DRAM_0P6
VDD_PL
L_AP_0P9, AVDD
_MIPI_DPHY_1P2, AVDD
_PL
L_AP_1P8, VDD_CPUCL
_PPC
_0P8, VDD_G3D_M_0P8
VDD_CPUCL
0_M_0P8, VDD_FS
YS_0P8, VDD_USB_0P9, AVDD_USB_1P8, AVDD
_USB_3P3, AVDD
_PL
L_CP_0P8
AVDD
_PL
L_CP_1P8, AVDD
_PL
L_CP_1P2, VDD_SIM
_1P8_3P0, VDD_SIM
2_1P8_3P0, VRF_TCX
O_1P8, VRF_DVDD
_1P0
VRF_TRX
_1P2, VRF_TRX
_LO
_1P2, VRF_TRX
_1P8, VRF_TX
LO_1P8, VRF_FE
M_2P8, VRF_GNSS_1P1
VRF_WL
_BT_RF_WL
BT_1P1, VRF_WL
_BT_RF_WL
BT_1P1, VRF_WL
BT_1P8, VRF_PA_WL
BT_1P8
VRF_WL
_WL
BT_3P3, VDD_EMMC_1P8, VDD_EMMC_2P8
5, VDD_TF
LASH
_3P0
MAIN FL ASH
FRONT FLASH
BTP CON BTP_SPI
BTP_IRQ
GRIP IC
TC305K
GRIP_I2C
GRIP_INT
HALL IC
AH1897S
HALL_INT
VDD_BTP_3P3
VDD_GRIP_2P8
VDD_1P8_AP
SIM & SD
(3 in 3)
SIM1_DATA
VDD_1P8_AP, VDD_NFC_SIM_1P8_3P0, VDD_SIM2_1P8_3P0,
VDD_SIM_1P8_3P0, VDD_TFLASH_3P0
SIM1_CLK/RST
TRAY_DET
T_FL ASH_D[0:3]/CLK
OSC
26MHz
PMIC_TCXO_IN_26M
AP_TCXO_IN_26M
NFC
PN553A1EV/C102Y
NFC_I2C
NFC_SWP
NFC_IRQ
NFC_CLK_26M
VPH_PWR, VDD_NFC_PVDD_1P8, VDD_NFC_SIM1_1P8_3P0
VDD_NFC_SIM2_1P8_3P0, VREG_L15A_SIM1_1P8_3P0
VREG_L17A_SIM2_1P8_3P0
WIFI
S5N5C12X01-6630
VRF_WL_BT_RF_WLBT_1P1, VRF_LO_WLBT_1P1, , VDD_1P8_AP
VRF_PA_WLBT_1P8, VRF_WL_WLBT_3P3
WLAN/BT/FM_SPDY
WLAN_TXIP, WLAN_TXIN
WLAN_TXQP, WLAN_TXQN
WLAN_RXIP, WLAN_RXIN
WLAN_RXQP, WLAN_RXQN
WLBT_TCXO_IN_26M
G_TCXO_IN, VCTCXO_IN (26MHz)
GPS_RF_IN
GPS LNA
BGU600 9
GPS_ANT
PRX_TR_IN_B40
PRX_TR_IN_B38_41
TX_TR_OUT_B7_38_40_41
TRX_B38_41
TRX_B40
TRX_B7
VBA
T_RF, VRF_PAM_VCC1
VRF_MIPI_IO_1P8
PRX_TR_IN_B12_17, PRX_TR_IN_B20
PRX_TR_IN_G1800_B3, PRX_TR_IN_EGSM_B8
PRX_TR_IN _B1, PRX_TR_IN_B2_G1900
MMPA
SKY77656-11
B28
DU PLEXE R
TRX_B28
SPDT
PRX_TR_IN_B28
PRX_TR_IN_B13
TX_PA_OUT_B28
TX_PA_OUT_B13
TX_PA_OUT_GSM_LB
TX_TR_OUT_GSM_LB
DRX_TR_IN_B1_4
DRX_TR_IN_B2_3_34_39_66
DRX_TR_IN_LB
B38/41
SAW
B2(25)/66
SAW
B28 (NC )
SAW
B40
SAW
B38/41
B2(25)/66
B40
B28
VRF_FEM_2P8, VRF_MIPI_IO_1P8
DRX_ANT_HB/MB/LB
COUPLER
MB/LB
DUPLEXER
PRX_ANT_MB
PRX_ANT_LB
GNSS_SPEEDY
DRX0_I_N/P, DRX0_Q_N/P
DRX1_I_N/P, DRX1_Q_N/P
PRX0_I_N/P, PRX0_Q_N/P
PRX1_I_N/P, PRX1_Q_N/P
GNSS_ADC_VIN_I/Q
TX_PA_OUT_B4_66
RCAM1
24M
RCAM2
5M
RCAM3
SUPER WIDE 8M
RCAM3_DVDD
_1P2, RCAM3_VDDI
O_1P8, RCAM3_AVDD_2P8
RCAM3 MIPI 3LANE
RCAM3_EEP_I2C
RCAM2_VDDI
O_1P8, RCAM2_DVDD
_1P2, RCAM2_AVDD
_2P8
RCAM2 MIPI 2LANE
RCAM2_RST_N
RCAM1_AFV
DD_2P8, RCAM1_DVDD
_1P0
5, RCAM1_AVDD_2P8, RCAM1_VDDI
O_1P8
RCAM1 MIPI 4LANE
RCAM1_FCAM_I2C, RCAM1_RST_N
RCAM1_FCAM_SENSOR_I2C
RCAM2_RCAM3_SENSOR_I2C
FM _ANT
WB_RF_2G
WL_TX_5G
WL_RX_5G
RF
SWITCH
DIPLEXER
DP X105950DT-
6016A1
OCTA DISPLAY
FHD+ 6.0"
VDD_TSP_A3P3, VDD_LCD_1P8, VDD_LCD_3P0, VDD_1P8_AP
MIPI_DSI0 4 LANE
TSP I2C
OCTA DC-DC
SM3004B
ELAVDD_7P6, ELVDD_4P6
ELVDD_-4P0
EL_ON1/2
SIM2_CLK/RST/DATA
WLAN_ANT
SM-A750FN/F/GN/G
Common
ANT2013
ANT2015
ANT2016
ANT2017
ANT6000
ANT6001
BH6000
C2022
C2027
C2028
C2040
C3002
C3003
C3006
C3011
C3012
C3014
C3015
C3016
C3017
C3022
C3026
C3027
C3028
C3029
C3031
C3034
C3035
C3036
C3037
C3038
C3039
C3040
C3041
C3042
C3055
C3057
C3059
C3060
C3062
C3063
C3075
C3087
C4000
C4004
C4005
C4012
C4016
C4019
C4031
C4032
C4033
C4036
C4074
C4075
C4076
C4077
C4078
C4079
C4080 C4081
C4082
C4090
C4105
C5002
C5010
C5017
C5018
C5019
C5020
C5021
C5022
C5023
C5024
C5026
C5029
C5031
C5032
C5033
C5034
C5057
C5059
C5060
C5065
C5066
C5067
C5069
C5072
C5073
C5074
C5075
C5076
C5077
C5078
C5079
C5083
C5086
C5087
C5088
C5111
C5112
C5114
C5115
C5117
C5118
C5119
C5123
C5127
C5128
C6000
C6001
C6002
C6003
C6004
C6005
C6009
C6013
C6014
C6015
C6019
C6021
C6022
C6027
C6028
C6029
C6036
C6039
C6040
C6042
C6044
C6045
C6046
C6047
C7000
C7001
C7002
C7003
C7004
C7008
C7011
C7012
C7015
C7017
C7018
C7019
C7020
C7021
C7023
C7029
C7041
C7042
C7043
C7045
C7057
C7060
C7062
C7063
C7064
C7065
C7067
C7077 C7078
C7079
C7133
C7134
C7142
C7144
C7145
C7152
C7166
CON6001
D5000
GNSS_SPEEDY
HDC7000
HDC7001
HDC7003
JTAG4000
L2014
L2015
L2020
L3006
L5008
L5010
L5011
L5012
L6000
L6001
L6003
L6006
L6007
L7000
L7001
L7003
LED5001
Q5000
R3001
R3002
R3003
R3006
R3007
R3010
R3013
R4000
R4001
R4002
R4003
R4004
R4005
R4006
R4007
R4009
R4011
R4012
R4013
R4014
R4015
R4016
R4017
R4018
R4019
R4020
R4021
R4022
R4023
R4024
R4027
R4028
R4029
R4030
R4031
R4032
R4033
R4034
R4035
R4036
R5000
R5004
R5005
R5006
R5007
R5008
R5010
R5011
R5014
R5015
R5016
R5018
R5019
R5020
R5021
R5022
R5023
R5024
R5025
R6007
R6010
R6012
R6013
R6015
R6028
R7000
R7001
R7003
R7004
R7007
R7014
R7017
SC6000
SC6001
SC6003
SIM1
SIM2 SIM3
SIM4UP
TH4000
TP_EMMC4000
TP_GYRO_INT
TP_HB_SW_SEL0
TP_HB_SW_SEL1
TP_NFC_1P8_EN
TP_NFC_CLK_REQ
TP_NFC_FIRM
TP_NFC_IRQ
TP_RFFE2_CLK
TP_RFFE2_DATA
TP_RST_SW1000
TP_SPEEDY_PMIC
TP_UB0 TP_UB1
TP_XCP_RF_ON4000
TP_XGNSS_GPLL_ANA_EXT
TP_XRTC_XTO
TP4000
TP4001
TP4002
TP4003
TP5000
TP5002
TP5004
TP5005
TP5006
TP5008
TP5009
TP5010
TP5011
TP5013
TP5014
TP5015
TP5016
TP5017
TP5018
TP5019
TP7004
TP7005
TP7006
U2001
U3000
U3001
U3005
U3006
U3013
U3014
U3016
U4003
U4004
U5013
U5019
U6008
U6009
U6013
U7000
U7004
U7005
U7009
U7011
U7013
U7176
U7207
U7208
U7209
UCP721
UME5000
ZD3000
ZD3001
ZD5001
ZD6000
ZD6001
ZD6002
ZD6004
ZD6005 ZD6006
ZD6007
ZD6016 ZD6017
ZD6018
ZD6019
ZD6020
ZD6021
ZD6022
ZD7000
ZD7010
ZD7011
Model : SM-A750FN
Revision : REV0.3
Manufacture Count : 300
Charge : 전훈남
Contact : 010-9492-7361
Date : 09/06
Routing :
Resin :
SM-A750FN
ANT2000
ANT2001
ANT2002
ANT3000
ANT3001
ANT3002
ANT3003
ANT5000
ANT5001
ANT5002
ANT5003
ANT5004
ANT5005
ANT5006
ANT5007
ANT5008
ANT5009
ANT5010
ANT5011
ANT5012
ANT5013
BB_IQB
C1000
C1001
C1002
C1003
C1004
C1005
C1006
C1007
C1008
C1009
C1010
C1011
C1012
C1013
C1014
C1015
C1016
C1018
C1019
C1020
C1021
C1022
C1023
C1024
C1026
C1027
C1028
C1029
C1030
C1031
C1032
C1033
C1034
C1035
C1036
C1037
C1038
C1039
C1040
C1041
C1042
C1043
C1044
C1045
C1047
C1048
C1049
C1050
C1051
C1052
C1053
C1054
C1055
C1056
C1057
C1058
C1059
C1060
C1061
C1062
C1063
C1064
C1065
C1066
C1067
C1068
C1069
C1070
C1071
C1072
C1073
C1074
C1075
C1076
C1077
C1078
C1079
C1080
C1081
C1082 C1083
C1084
C1085
C1086
C1087
C1089
C1090
C1091
C1092
C1093
C1094
C1095
C1096
C1097
C1098
C1099
C1100
C1101
C1102
C1103
C1104
C1105
C1106
C1107
C1108
C1109
C1110
C1111
C1112
C1115
C1116
C1117
C1118
C1119
C1120
C1122
C1123
C1124
C1125
C1127
C2000
C2001
C2002
C2003
C2004
C2005
C2006
C2007
C2008
C2009
C2011
C2012
C2013
C2014
C2015
C2016
C2017
C2018
C2019
C2020
C2021
C2023
C2024
C2025
C2026
C2029
C2030
C2031
C2032
C2033
C2034
C2035
C2036
C2037
C2039
C2046
C2048
C2050
C2051
C2052
C2053
C2054
C2055
C2056
C2057
C2061
C2062
C2063
C2064
C2065
C2066
C2067
C2068
C2069
C2071
C2072
C2073
C2075
C2076
C2077
C2078
C2079
C2080
C2081
C2089
C2091
C2095
C3000
C3001
C3004
C3005
C3007
C3008
C3009
C3010
C3013
C3018
C3019
C3020
C3021
C3023
C3024
C3025
C3030
C3032
C3033
C3043
C3044
C3045
C3046
C3047
C3048
C3049
C3050
C3051
C3052
C3053
C3054
C3056
C3058
C3061
C3064
C3065
C3066
C3067
C3068
C3069
C3070
C3072
C3073
C3074
C3076
C3077
C3078
C3080
C3081
C3082
C3083
C3084
C3085
C3086
C3088
C3089
C4001
C4002
C4003
C4006
C4007
C4008
C4009
C4010
C4011
C4013
C4014
C4015
C4017
C4018
C4020
C4023
C4024
C4025
C4026
C4027
C4028
C4029
C4030
C4034
C4035
C4037
C4038
C4039
C4040
C4041
C4042
C4043
C4044
C4045
C4046
C4047
C4048
C4049
C4050
C4051
C4052
C4053
C4054
C4055
C4056
C4057
C4058
C4059
C4060
C4061
C4062
C4063
C4064
C4065
C4066
C4067
C4068
C4069
C4070
C4071
C4072
C4073
C4083
C4084
C4085
C4086
C4087
C4088
C4089
C4091
C4092
C4093
C4094
C4095
C4096
C4097
C4098
C4099
C4100
C4101
C4102
C4103
C4104
C5000
C5001
C5003
C5004
C5005
C5006
C5007
C5008
C5009
C5011
C5012
C5013
C5014
C5015
C5016
C5025
C5027
C5028
C5030
C5035
C5036
C5037
C5038
C5039
C5040
C5041
C5042
C5043
C5044
C5045
C5046
C5047
C5048
C5049
C5050
C5051
C5052
C5053
C5054
C5055
C5056
C5058
C5061
C5062
C5063
C5064
C5068
C5070
C5071
C5080
C5081
C5082
C5084
C5085
C5089
C5090
C5091
C5092
C5093 C5094
C5097
C5098
C5103
C5104
C5105
C5106
C5107
C5108
C5109
C5110
C5113
C5116
C5120
C5121
C5122
C5124
C5125
C5126
C5129
C6006
C6007
C6008
C6010
C6011
C6012
C6016
C6017
C6018
C6020
C6023
C6024
C6025
C6026
C6030
C6031
C6032
C6033
C6034
C6035
C6037
C6038
C6041
C7005
C7006
C7007
C7009
C7010
C7013
C7014
C7016
C7022
C7024
C7025
C7026
C7027
C7028
C7030
C7031
C7032
C7033
C7034
C7035
C7036
C7037
C7038
C7039
C7053
C7054
C7055
C7056
C7058
C7059
C7061
C7068
C7069
C7070
C7071
C7072
C7073
C7074
C7075
C7076
C7081
C7082 C7083
C7084 C7085 C7086
C7088
C7089
C7147
C7151
C7153
C7154
C7155
C7156
C7157
CON6000
D6000
F1000
F1001
F1002
F1003
F1004
F1005
F1006
F1007
F1008
F1009
F1010
F1011
F2000
F2001
F2002
F2003
F2004
F2005
F3000
F3001
F3002
F3003
GA7001
HDC4000
HDC5000
HDC6000
HDC7002
HDC7004
L1000
L1001
L1002
L1003
L1004
L1005
L1006
L1007
L1008
L1009
L1010
L1011
L1012
L1013
L1014
L1015
L1016
L1017
L1018
L1019
L1020
L1021
L1023
L1024 L1025
L1026
L1027
L1028
L1029
L1030
L1031
L1032
L1033
L1034
L1035
L1036
L1037
L1038
L1039
L1040
L1041
L1042
L1043
L1044
L1045
L1046
L1047
L1048
L1049
L1050
L1051
L1052
L1053
L1054
L1055
L1056
L1057
L1058
L1059
L1060
L1061
L1062
L1063
L1064
L1065
L1066
L1067
L1068
L1070
L1071
L1072
L1073
L1074
L1075
L1076
L1077
L2000
L2001
L2002
L2003
L2004
L2005
L2006
L2007
L2008
L2009
L2010
L2011
L2012
L2013
L2016
L2017
L2018
L2019
L2021
L2022
L2023
L2025
L2026
L2027
L2028
L2030
L2031
L2032
L2034
L2035
L2036
L2046
L2049
L2059
L3000
L3001
L3002
L3003
L3004
L3005
L3007
L3008
L3009
L3010
L3011
L3012
L3013
L3014
L3015
L3016
L3017
L3018
L3019
L3020
L5000
L5001
L5002
L5003
L5004
L5005
L5006
L5007
L5009
L6002
L6004
L6005
L6008
L6009
L6010
L6011
L6012
L6013
L6014
L7002
L7004
L7005
L7006
L7007
L7008
L7009
L7010
L7011
L7012
LED5000
MIC6000
OSC2000
OSC3000
OSC5000
PAM1000
R1002
R1003
R1004
R1005
R1006
R1007
R1008
R1009
R2000
R2002
R2003
R3000
R3011
R3012
R4008
R4010
R4025
R4026
R5001
R5002
R5003
R5012
R5013
R5017
R6000
R6001
R6002
R6003
R6004
R6005
R6006
R6008
R6018
R6019
R6022
R6024
R6026
R6027
R6030
R6031
R6032
R6034
R6035
R6036
R6037
R6038
R6039
R6041
R6042
R7005
R7006
R7015
RFS1000
RFS1001
SC6002
SC6004
SC6005
SC6008
TH1000
TP_3000
TP_BT_SPDY_FROM_S3000
TP_BT_SPDY_TO_S3000
TP_DISP_TE
TP_OLED_RST
TP_PMIC_AP32K
TP_RFFE0_CLK
TP_RFFE0_DATA
TP_WLAN_SPDY_FROM_S3000 TP_WLAN_SPDY_TO_S3000
TP5001
TP5003
TP5007
TP5012
TP6000
TP6001 TP6002
TP6003
U1000
U1001
U1002
U1003
U1004
U1005
U1007
U1008
U1009
U1013
U1015
U2000
U2002
U2005
U2006
U2010
U3002
U3003
U3004
U3008
U3012
U3017
U3018
U3019
U5000
U5021
U6000
U6017
U6020
U7002
U7003
U7006
U7007
U7008
U7016 U7017
U7018
U7019
U7173
U7174
U7211
U7212
V7003
ZD1000
ZD5000
ZD5002
ZD5003
ZD5004
ZD5005 ZD5006 ZD5011
ZD5012
ZD6003
ZD6009
ZD6010
ZD6011
ZD6013
ZD6014
ZD6015
ZD7002
ZD7007
ZD7008 ZD7009
Model : SM-A750FN
Revision : REV0.3
Manufacture Count : 300
Charge : 전훈남
Contact : 010-9492-7361
Date : 09/06
Routing :
Resin :
SM-A750FN
ANT2013
ANT2015
ANT2016
ANT2017
ANT6000
ANT6001
BH6000
C2022
C2027
C2028
C2040
C3002
C3003
C3006
C3011
C3012
C3014
C3015
C3016
C3017
C3022
C3026
C3027
C3028
C3029
C3031
C3034
C3035
C3036
C3037
C3038
C3039
C3040
C3041
C3042
C3055
C3057
C3059
C3060
C3062
C3063
C3075
C3087
C4000
C4004
C4005
C4012
C4016
C4019
C4031
C4032
C4033
C4036
C4074
C4075
C4076
C4077
C4078
C4079
C4080 C4081
C4082
C4090
C4105
C5002
C5010
C5017
C5018
C5019
C5020
C5021
C5022
C5023
C5024
C5026
C5029
C5031
C5032
C5033
C5034
C5057
C5059
C5060
C5065
C5066
C5067
C5069
C5072
C5073
C5074
C5075
C5076
C5077
C5078
C5079
C5083
C5086
C5087
C5088
C5111
C5112
C5114
C5115
C5117
C5118
C5119
C5123
C5127
C5128
C6000
C6001
C6002
C6003
C6004
C6005
C6009
C6013
C6014
C6015
C6019
C6021
C6022
C6027
C6028
C6029
C6036
C6039
C6040
C6042
C6044
C6045
C6046
C6047
C7000
C7001
C7002
C7003
C7004
C7008
C7011
C7012
C7015
C7017
C7018
C7019
C7020
C7021
C7023
C7029
C7041
C7042
C7043
C7045
C7057
C7060
C7062
C7063
C7064
C7065
C7067
C7077 C7078
C7079
C7133
C7134
C7142
C7144
C7145
C7152
C7166
CON6001
D5000
GNSS_SPEEDY
HDC7000
HDC7001
HDC7003
JTAG4000
L2014
L2015
L2020
L3006
L5008
L5010
L5011
L5012
L6000
L6001
L6003
L6006
L6007
L7000
L7001
L7003
LED5001
Q5000
R3001
R3002
R3003
R3006
R3007
R3010
R3013
R4000
R4001
R4002
R4003
R4004
R4005
R4006
R4007
R4009
R4011
R4012
R4013
R4014
R4015
R4016
R4017
R4018
R4019
R4020
R4021
R4022
R4023
R4024
R4027
R4028
R4029
R4030
R4031
R4032
R4033
R4034
R4035
R4036
R5000
R5004
R5005
R5006
R5007
R5008
R5010
R5011
R5014
R5015
R5016
R5018
R5019
R5020
R5021
R5022
R5023
R5024
R5025
R6007
R6010
R6012
R6013
R6015
R6028
R7000
R7001
R7003
R7004
R7007
R7014
R7017
SC6000
SC6001
SC6003
SIM1
SIM2 SIM3
SIM4UP
TH4000
TP_EMMC4000
TP_GYRO_INT
TP_HB_SW_SEL0
TP_HB_SW_SEL1
TP_NFC_1P8_EN
TP_NFC_CLK_REQ
TP_NFC_FIRM
TP_NFC_IRQ
TP_RFFE2_CLK
TP_RFFE2_DATA
TP_RST_SW1000
TP_SPEEDY_PMIC
TP_UB0 TP_UB1
TP_XCP_RF_ON4000
TP_XGNSS_GPLL_ANA_EXT
TP_XRTC_XTO
TP4000
TP4001
TP4002
TP4003
TP5000
TP5002
TP5004
TP5005
TP5006
TP5008
TP5009
TP5010
TP5011
TP5013
TP5014
TP5015
TP5016
TP5017
TP5018
TP5019
TP7004
TP7005
TP7006
U2001
U3000
U3001
U3005
U3006
U3013
U3014
U3016
U4003
U4004
U5013
U5019
U6008
U6009
U6013
U7000
U7004
U7005
U7009
U7011
U7013
U7176
U7207
U7208
U7209
UCP721
UME5000
ZD3000
ZD3001
ZD5001
ZD6000
ZD6001
ZD6002
ZD6004
ZD6005 ZD6006
ZD6007
ZD6016 ZD6017
ZD6018
ZD6019
ZD6020
ZD6021
ZD6022
ZD7000
ZD7010
ZD7011
Model : SM-A750F
Revision : REV0.3
Manufacture Count : 300
Charge : 전훈남
Contact : 010-9492-7361
Date : 09/05
Routing :
Resin :
SM-A750F
ANT2000
ANT2001
ANT2002
ANT3000
ANT3001
ANT3002
ANT3003
ANT5000
ANT5001
ANT5002
ANT5003
ANT5004
ANT5005
ANT5006
ANT5007
ANT5008
ANT5009
ANT5010
ANT5011
ANT5012
ANT5013
BB_IQB
C1000
C1001
C1002
C1003
C1004
C1005
C1006
C1007
C1008
C1009
C1010
C1011
C1012
C1013
C1014
C1015
C1016
C1018
C1019
C1020
C1021
C1022
C1023
C1024
C1026
C1027
C1028
C1029
C1030
C1031
C1032
C1033
C1034
C1035
C1036
C1037
C1038
C1039
C1040
C1041
C1042
C1043
C1044
C1045
C1047
C1048
C1049
C1050
C1051
C1052
C1053
C1054
C1055
C1056
C1057
C1058
C1059
C1060
C1061
C1062
C1063
C1064
C1065
C1066
C1067
C1068
C1069
C1070
C1071
C1072
C1073
C1074
C1075
C1076
C1077
C1078
C1079
C1080
C1081
C1082 C1083
C1084
C1085
C1086
C1087
C1089
C1090
C1091
C1092
C1093
C1094
C1095
C1096
C1097
C1098
C1099
C1100
C1101
C1102
C1103
C1104
C1105
C1106
C1107
C1108
C1109
C1110
C1111
C1112
C1115
C1116
C1117
C1118
C1119
C1120
C1122
C1123
C1124
C1125
C1127
C2000
C2001
C2002
C2003
C2004
C2005
C2006
C2007
C2008
C2009
C2011
C2012
C2013
C2014
C2015
C2016
C2017
C2018
C2019
C2020
C2021
C2023
C2024
C2025
C2026
C2029
C2030
C2031
C2032
C2033
C2034
C2035
C2036
C2037
C2039
C2046
C2048
C2050
C2051
C2052
C2053
C2054
C2055
C2056
C2057
C2061
C2062
C2063
C2064
C2065
C2066
C2067
C2068
C2069
C2071
C2072
C2073
C2075
C2076
C2077
C2078
C2079
C2080
C2081
C2089
C2091
C2095
C3000
C3001
C3004
C3005
C3007
C3008
C3009
C3010
C3013
C3018
C3019
C3020
C3021
C3023
C3024
C3025
C3030
C3032
C3033
C3043
C3044
C3045
C3046
C3047
C3048
C3049
C3050
C3051
C3052
C3053
C3054
C3056
C3058
C3061
C3064
C3065
C3066
C3067
C3068
C3069
C3070
C3072
C3073
C3074
C3076
C3077
C3078
C3080
C3081
C3082
C3083
C3084
C3085
C3086
C3088
C3089
C4001
C4002
C4003
C4006
C4007
C4008
C4009
C4010
C4011
C4013
C4014
C4015
C4017
C4018
C4020
C4023
C4024
C4025
C4026
C4027
C4028
C4029
C4030
C4034
C4035
C4037
C4038
C4039
C4040
C4041
C4042
C4043
C4044
C4045
C4046
C4047
C4048
C4049
C4050
C4051
C4052
C4053
C4054
C4055
C4056
C4057
C4058
C4059
C4060
C4061
C4062
C4063
C4064
C4065
C4066
C4067
C4068
C4069
C4070
C4071
C4072
C4073
C4083
C4084
C4085
C4086
C4087
C4088
C4089
C4091
C4092
C4093
C4094
C4095
C4096
C4097
C4098
C4099
C4100
C4101
C4102
C4103
C4104
C5000
C5001
C5003
C5004
C5005
C5006
C5007
C5008
C5009
C5011
C5012
C5013
C5014
C5015
C5016
C5025
C5027
C5028
C5030
C5035
C5036
C5037
C5038
C5039
C5040
C5041
C5042
C5043
C5044
C5045
C5046
C5047
C5048
C5049
C5050
C5051
C5052
C5053
C5054
C5055
C5056
C5058
C5061
C5062
C5063
C5064
C5068
C5070
C5071
C5080
C5081
C5082
C5084
C5085
C5089
C5090
C5091
C5092
C5093 C5094
C5097
C5098
C5103
C5104
C5105
C5106
C5107
C5108
C5109
C5110
C5113
C5116
C5120
C5121
C5122
C5124
C5125
C5126
C5129
C6006
C6007
C6008
C6010
C6011
C6012
C6016
C6017
C6018
C6020
C6023
C6024
C6025
C6026
C6030
C6031
C6032
C6033
C6034
C6035
C6037
C6038
C6041
C7005
C7006
C7007
C7009
C7010
C7013
C7014
C7016
C7022
C7024
C7025
C7026
C7027
C7028
C7030
C7031
C7032
C7033
C7034
C7035
C7036
C7037
C7038
C7039
C7053
C7054
C7055
C7056
C7058
C7059
C7061
C7068
C7069
C7070
C7071
C7072
C7073
C7074
C7075
C7076
C7081
C7082 C7083
C7084 C7085 C7086
C7088
C7089
C7147
C7151
C7153
C7154
C7155
C7156
C7157
CON6000
D6000
F1000
F1001
F1002
F1003
F1004
F1005
F1006
F1007
F1008
F1009
F1010
F1011
F2000
F2001
F2002
F2003
F2004
F2005
F3000
F3001
F3002
F3003
GA7001
HDC4000
HDC5000
HDC6000
HDC7002
HDC7004
L1000
L1001
L1002
L1003
L1004
L1005
L1006
L1007
L1008
L1009
L1010
L1011
L1012
L1013
L1014
L1015
L1016
L1017
L1018
L1019
L1020
L1021
L1023
L1024 L1025
L1026
L1027
L1028
L1029
L1030
L1031
L1032
L1033
L1034
L1035
L1036
L1037
L1038
L1039
L1040
L1041
L1042
L1043
L1044
L1045
L1046
L1047
L1048
L1049
L1050
L1051
L1052
L1053
L1054
L1055
L1056
L1057
L1058
L1059
L1060
L1061
L1062
L1063
L1064
L1065
L1066
L1067
L1068
L1070
L1071
L1072
L1073
L1074
L1075
L1076
L1077
L2000
L2001
L2002
L2003
L2004
L2005
L2006
L2007
L2008
L2009
L2010
L2011
L2012
L2013
L2016
L2017
L2018
L2019
L2021
L2022
L2023
L2025
L2026
L2027
L2028
L2030
L2031
L2032
L2034
L2035
L2036
L2046
L2049
L2059
L3000
L3001
L3002
L3003
L3004
L3005
L3007
L3008
L3009
L3010
L3011
L3012
L3013
L3014
L3015
L3016
L3017
L3018
L3019
L3020
L5000
L5001
L5002
L5003
L5004
L5005
L5006
L5007
L5009
L6002
L6004
L6005
L6008
L6009
L6010
L6011
L6012
L6013
L6014
L7002
L7004
L7005
L7006
L7007
L7008
L7009
L7010
L7011
L7012
LED5000
MIC6000
OSC2000
OSC3000
OSC5000
PAM1000
R1002
R1003
R1004
R1005
R1006
R1007
R1008
R1009
R2000
R2002
R2003
R3000
R3011
R3012
R4008
R4010
R4025
R4026
R5001
R5002
R5003
R5012
R5013
R5017
R6000
R6001
R6002
R6003
R6004
R6005
R6006
R6008
R6018
R6019
R6022
R6024
R6026
R6027
R6030
R6031
R6032
R6034
R6035
R6036
R6037
R6038
R6039
R6041
R6042
R7005
R7006
R7015
RFS1000
RFS1001
SC6002
SC6004
SC6005
SC6008
TH1000
TP_3000
TP_BT_SPDY_FROM_S3000
TP_BT_SPDY_TO_S3000
TP_DISP_TE
TP_OLED_RST
TP_PMIC_AP32K
TP_RFFE0_CLK
TP_RFFE0_DATA
TP_WLAN_SPDY_FROM_S3000 TP_WLAN_SPDY_TO_S3000
TP5001
TP5003
TP5007
TP5012
TP6000
TP6001 TP6002
TP6003
U1000
U1001
U1002
U1003
U1004
U1005
U1007
U1008
U1009
U1013
U1015
U2000
U2002
U2005
U2006
U2010
U3002
U3003
U3004
U3008
U3012
U3017
U3018
U3019
U5000
U5021
U6000
U6017
U6020
U7002
U7003
U7006
U7007
U7008
U7016 U7017
U7018
U7019
U7173
U7174
U7211
U7212
V7003
ZD1000
ZD5000
ZD5002
ZD5003
ZD5004
ZD5005 ZD5006 ZD5011
ZD5012
ZD6003
ZD6009
ZD6010
ZD6011
ZD6013
ZD6014
ZD6015
ZD7002
ZD7007
ZD7008 ZD7009
Model : SM-A750F
Revision : REV0.3
Manufacture Count : 300
Charge : 전훈남
Contact : 010-9492-7361
Date : 09/05
Routing :
Resin :
SM-A750F
ANT2013
ANT2015
ANT2016
ANT2017
ANT6000
ANT6001
BH6000
C2022
C2027
C2028
C2040
C3002
C3003
C3006
C3011
C3012
C3014
C3015
C3016
C3017
C3022
C3026
C3027
C3028
C3029
C3031
C3034
C3035
C3036
C3037
C3038
C3039
C3040
C3041
C3042
C3055
C3057
C3059
C3060
C3062
C3063
C3075
C3087
C4000
C4004
C4005
C4012
C4016
C4019
C4031
C4032
C4033
C4036
C4074
C4075
C4076
C4077
C4078
C4079
C4080 C4081
C4082
C4090
C4105
C5002
C5010
C5017
C5018
C5019
C5020
C5021
C5022
C5023
C5024
C5026
C5029
C5031
C5032
C5033
C5034
C5057
C5059
C5060
C5065
C5066
C5067
C5069
C5072
C5073
C5074
C5075
C5076
C5077
C5078
C5079
C5083
C5086
C5087
C5088
C5111
C5112
C5114
C5115
C5117
C5118
C5119
C5123
C5127
C5128
C6000
C6001
C6002
C6003
C6004
C6005
C6009
C6013
C6014
C6015
C6019
C6021
C6022
C6027
C6028
C6029
C6036
C6039
C6040
C6042
C6044
C6045
C6046
C6047
C7000
C7001
C7002
C7003
C7004
C7008
C7011
C7012
C7015
C7017
C7018
C7019
C7020
C7021
C7023
C7029
C7041
C7042
C7043
C7045
C7057
C7060
C7062
C7063
C7064
C7065
C7067
C7077 C7078
C7079
C7133
C7134
C7142
C7144
C7145
C7152
C7166
CON6001
D5000
GNSS_SPEEDY
HDC7000
HDC7001
HDC7003
JTAG4000
L2014
L2015
L2020
L3006
L5008
L5010
L5011
L5012
L6000
L6001
L6003
L6006
L6007
L7000
L7001
L7003
LED5001
Q5000
R3001
R3002
R3003
R3006
R3007
R3010
R3013
R4000
R4001
R4002
R4003
R4004
R4005
R4006
R4007
R4009
R4011
R4012
R4013
R4014
R4015
R4016
R4017
R4018
R4019
R4020
R4021
R4022
R4023
R4024
R4027
R4028
R4029
R4030
R4031
R4032
R4033
R4034
R4035
R4036
R5000
R5004
R5005
R5006
R5007
R5008
R5010
R5011
R5014
R5015
R5016
R5018
R5019
R5020
R5021
R5022
R5023
R5024
R5025
R6007
R6010
R6012
R6013
R6015
R6028
R7000
R7001
R7003
R7004
R7007
R7014
R7017
SC6000
SC6001
SC6003
SIM1
SIM2 SIM3
SIM4UP
TH4000
TP_EMMC4000
TP_GYRO_INT
TP_HB_SW_SEL0
TP_HB_SW_SEL1
TP_NFC_1P8_EN
TP_NFC_CLK_REQ
TP_NFC_FIRM
TP_NFC_IRQ
TP_RFFE2_CLK
TP_RFFE2_DATA
TP_RST_SW1000
TP_SPEEDY_PMIC
TP_UB0 TP_UB1
TP_XCP_RF_ON4000
TP_XGNSS_GPLL_ANA_EXT
TP_XRTC_XTO
TP4000
TP4001
TP4002
TP4003
TP5000
TP5002
TP5004
TP5005
TP5006
TP5008
TP5009
TP5010
TP5011
TP5013
TP5014
TP5015
TP5016
TP5017
TP5018
TP5019
TP7004
TP7005
TP7006
U2001
U3000
U3001
U3005
U3006
U3013
U3014
U3016
U4003
U4004
U5013
U5019
U6008
U6009
U6013
U7000
U7004
U7005
U7009
U7011
U7013
U7176
U7207
U7208
U7209
UCP721
UME5000
ZD3000
ZD3001
ZD5001
ZD6000
ZD6001
ZD6002
ZD6004
ZD6005 ZD6006
ZD6007
ZD6016 ZD6017
ZD6018
ZD6019
ZD6020
ZD6021
ZD6022
ZD7000
ZD7010
ZD7011
Model : SM-A750GN
Revision : REV0.3
Manufacture Count : 300
Charge : 전훈남
Contact : 010-9492-7361
Date : 09/03
Routing :
Resin :
SM-A750GN
ANT2000
ANT2001
ANT2002
ANT3000
ANT3001
ANT3002
ANT3003
ANT5000
ANT5001
ANT5002
ANT5003
ANT5004
ANT5005
ANT5006
ANT5007
ANT5008
ANT5009
ANT5010
ANT5011
ANT5012
ANT5013
BB_IQB
C1000
C1001
C1002
C1003
C1004
C1005
C1006
C1007
C1008
C1009
C1010
C1011
C1012
C1013
C1014
C1015
C1016
C1018
C1019
C1020
C1021
C1022
C1023
C1024
C1026
C1027
C1028
C1029
C1030
C1031
C1032
C1033
C1034
C1035
C1036
C1037
C1038
C1039
C1040
C1041
C1042
C1043
C1044
C1045
C1047
C1048
C1049
C1050
C1051
C1052
C1053
C1054
C1055
C1056
C1057
C1058
C1059
C1060
C1061
C1062
C1063
C1064
C1065
C1066
C1067
C1068
C1069
C1070
C1071
C1072
C1073
C1074
C1075
C1076
C1077
C1078
C1079
C1080
C1081
C1082 C1083
C1084
C1085
C1086
C1087
C1089
C1090
C1091
C1092
C1093
C1094
C1095
C1096
C1097
C1098
C1099
C1100
C1101
C1102
C1103
C1104
C1105
C1106
C1107
C1108
C1109
C1110
C1111
C1112
C1115
C1116
C1117
C1118
C1119
C1120
C1122
C1123
C1124
C1125
C1127
C2000
C2001
C2002
C2003
C2004
C2005
C2006
C2007
C2008
C2009
C2011
C2012
C2013
C2014
C2015
C2016
C2017
C2018
C2019
C2020
C2021
C2023
C2024
C2025
C2026
C2029
C2030
C2031
C2032
C2033
C2034
C2035
C2036
C2037
C2039
C2046
C2048
C2050
C2051
C2052
C2053
C2054
C2055
C2056
C2057
C2061
C2062
C2063
C2064
C2065
C2066
C2067
C2068
C2069
C2071
C2072
C2073
C2075
C2076
C2077
C2078
C2079
C2080
C2081
C2089
C2091
C2095
C3000
C3001
C3004
C3005
C3007
C3008
C3009
C3010
C3013
C3018
C3019
C3020
C3021
C3023
C3024
C3025
C3030
C3032
C3033
C3043
C3044
C3045
C3046
C3047
C3048
C3049
C3050
C3051
C3052
C3053
C3054
C3056
C3058
C3061
C3064
C3065
C3066
C3067
C3068
C3069
C3070
C3072
C3073
C3074
C3076
C3077
C3078
C3080
C3081
C3082
C3083
C3084
C3085
C3086
C3088
C3089
C4001
C4002
C4003
C4006
C4007
C4008
C4009
C4010
C4011
C4013
C4014
C4015
C4017
C4018
C4020
C4023
C4024
C4025
C4026
C4027
C4028
C4029
C4030
C4034
C4035
C4037
C4038
C4039
C4040
C4041
C4042
C4043
C4044
C4045
C4046
C4047
C4048
C4049
C4050
C4051
C4052
C4053
C4054
C4055
C4056
C4057
C4058
C4059
C4060
C4061
C4062
C4063
C4064
C4065
C4066
C4067
C4068
C4069
C4070
C4071
C4072
C4073
C4083
C4084
C4085
C4086
C4087
C4088
C4089
C4091
C4092
C4093
C4094
C4095
C4096
C4097
C4098
C4099
C4100
C4101
C4102
C4103
C4104
C5000
C5001
C5003
C5004
C5005
C5006
C5007
C5008
C5009
C5011
C5012
C5013
C5014
C5015
C5016
C5025
C5027
C5028
C5030
C5035
C5036
C5037
C5038
C5039
C5040
C5041
C5042
C5043
C5044
C5045
C5046
C5047
C5048
C5049
C5050
C5051
C5052
C5053
C5054
C5055
C5056
C5058
C5061
C5062
C5063
C5064
C5068
C5070
C5071
C5080
C5081
C5082
C5084
C5085
C5089
C5090
C5091
C5092
C5093 C5094
C5097
C5098
C5103
C5104
C5105
C5106
C5107
C5108
C5109
C5110
C5113
C5116
C5120
C5121
C5122
C5124
C5125
C5126
C5129
C6006
C6007
C6008
C6010
C6011
C6012
C6016
C6017
C6018
C6020
C6023
C6024
C6025
C6026
C6030
C6031
C6032
C6033
C6034
C6035
C6037
C6038
C6041
C7005
C7006
C7007
C7009
C7010
C7013
C7014
C7016
C7022
C7024
C7025
C7026
C7027
C7028
C7030
C7031
C7032
C7033
C7034
C7035
C7036
C7037
C7038
C7039
C7053
C7054
C7055
C7056
C7058
C7059
C7061
C7068
C7069
C7070
C7071
C7072
C7073
C7074
C7075
C7076
C7081
C7082 C7083
C7084 C7085 C7086
C7088
C7089
C7147
C7151
C7153
C7154
C7155
C7156
C7157
CON6000
D6000
F1000
F1001
F1002
F1003
F1004
F1005
F1006
F1007
F1008
F1009
F1010
F1011
F2000
F2001
F2002
F2003
F2004
F2005
F3000
F3001
F3002
F3003
GA7001
HDC4000
HDC5000
HDC6000
HDC7002
HDC7004
L1000
L1001
L1002
L1003
L1004
L1005
L1006
L1007
L1008
L1009
L1010
L1011
L1012
L1013
L1014
L1015
L1016
L1017
L1018
L1019
L1020
L1021
L1023
L1024 L1025
L1026
L1027
L1028
L1029
L1030
L1031
L1032
L1033
L1034
L1035
L1036
L1037
L1038
L1039
L1040
L1041
L1042
L1043
L1044
L1045
L1046
L1047
L1048
L1049
L1050
L1051
L1052
L1053
L1054
L1055
L1056
L1057
L1058
L1059
L1060
L1061
L1062
L1063
L1064
L1065
L1066
L1067
L1068
L1070
L1071
L1072
L1073
L1074
L1075
L1076
L1077
L2000
L2001
L2002
L2003
L2004
L2005
L2006
L2007
L2008
L2009
L2010
L2011
L2012
L2013
L2016
L2017
L2018
L2019
L2021
L2022
L2023
L2025
L2026
L2027
L2028
L2030
L2031
L2032
L2034
L2035
L2036
L2046
L2049
L2059
L3000
L3001
L3002
L3003
L3004
L3005
L3007
L3008
L3009
L3010
L3011
L3012
L3013
L3014
L3015
L3016
L3017
L3018
L3019
L3020
L5000
L5001
L5002
L5003
L5004
L5005
L5006
L5007
L5009
L6002
L6004
L6005
L6008
L6009
L6010
L6011
L6012
L6013
L6014
L7002
L7004
L7005
L7006
L7007
L7008
L7009
L7010
L7011
L7012
LED5000
MIC6000
OSC2000
OSC3000
OSC5000
PAM1000
R1002
R1003
R1004
R1005
R1006
R1007
R1008
R1009
R2000
R2002
R2003
R3000
R3011
R3012
R4008
R4010
R4025
R4026
R5001
R5002
R5003
R5012
R5013
R5017
R6000
R6001
R6002
R6003
R6004
R6005
R6006
R6008
R6018
R6019
R6022
R6024
R6026
R6027
R6030
R6031
R6032
R6034
R6035
R6036
R6037
R6038
R6039
R6041
R6042
R7005
R7006
R7015
RFS1000
RFS1001
SC6002
SC6004
SC6005
SC6008
TH1000
TP_3000
TP_BT_SPDY_FROM_S3000
TP_BT_SPDY_TO_S3000
TP_DISP_TE
TP_OLED_RST
TP_PMIC_AP32K
TP_RFFE0_CLK
TP_RFFE0_DATA
TP_WLAN_SPDY_FROM_S3000 TP_WLAN_SPDY_TO_S3000
TP5001
TP5003
TP5007
TP5012
TP6000
TP6001 TP6002
TP6003
U1000
U1001
U1002
U1003
U1004
U1005
U1007
U1008
U1009
U1013
U1015
U2000
U2002
U2005
U2006
U2010
U3002
U3003
U3004
U3008
U3012
U3017
U3018
U3019
U5000
U5021
U6000
U6017
U6020
U7002
U7003
U7006
U7007
U7008
U7016 U7017
U7018
U7019
U7173
U7174
U7211
U7212
V7003
ZD1000
ZD5000
ZD5002
ZD5003
ZD5004
ZD5005 ZD5006 ZD5011
ZD5012
ZD6003
ZD6009
ZD6010
ZD6011
ZD6013
ZD6014
ZD6015
ZD7002
ZD7007
ZD7008 ZD7009
Model : SM-A750GN
Revision : REV0.3
Manufacture Count : 300
Charge : 전훈남
Contact : 010-9492-7361
Date : 09/03
Routing :
Resin :
SM-A750GN
ANT2013
ANT2015
ANT2016
ANT2017
ANT6000
ANT6001
BH6000
C2022
C2027
C2028
C2040
C3002
C3003
C3006
C3011
C3012
C3014
C3015
C3016
C3017
C3022
C3026
C3027
C3028
C3029
C3031
C3034
C3035
C3036
C3037
C3038
C3039
C3040
C3041
C3042
C3055
C3057
C3059
C3060
C3062
C3063
C3075
C3087
C4000
C4004
C4005
C4012
C4016
C4019
C4031
C4032
C4033
C4036
C4074
C4075
C4076
C4077
C4078
C4079
C4080 C4081
C4082
C4090
C4105
C5002
C5010
C5017
C5018
C5019
C5020
C5021
C5022
C5023
C5024
C5026
C5029
C5031
C5032
C5033
C5034
C5057
C5059
C5060
C5065
C5066
C5067
C5069
C5072
C5073
C5074
C5075
C5076
C5077
C5078
C5079
C5083
C5086
C5087
C5088
C5111
C5112
C5114
C5115
C5117
C5118
C5119
C5123
C5127
C5128
C6000
C6001
C6002
C6003
C6004
C6005
C6009
C6013
C6014
C6015
C6019
C6021
C6022
C6027
C6028
C6029
C6036
C6039
C6040
C6042
C6044
C6045
C6046
C6047
C7000
C7001
C7002
C7003
C7004
C7008
C7011
C7012
C7015
C7017
C7018
C7019
C7020
C7021
C7023
C7029
C7041
C7042
C7043
C7045
C7057
C7060
C7062
C7063
C7064
C7065
C7067
C7077 C7078
C7079
C7133
C7134
C7142
C7144
C7145
C7152
C7166
CON6001
D5000
GNSS_SPEEDY
HDC7000
HDC7001
HDC7003
JTAG4000
L2014
L2015
L2020
L3006
L5008
L5010
L5011
L5012
L6000
L6001
L6003
L6006
L6007
L7000
L7001
L7003
LED5001
Q5000
R3001
R3002
R3003
R3006
R3007
R3010
R3013
R4000
R4001
R4002
R4003
R4004
R4005
R4006
R4007
R4009
R4011
R4012
R4013
R4014
R4015
R4016
R4017
R4018
R4019
R4020
R4021
R4022
R4023
R4024
R4027
R4028
R4029
R4030
R4031
R4032
R4033
R4034
R4035
R4036
R5000
R5004
R5005
R5006
R5007
R5008
R5010
R5011
R5014
R5015
R5016
R5018
R5019
R5020
R5021
R5022
R5023
R5024
R5025
R6007
R6010
R6012
R6013
R6015
R6028
R7000
R7001
R7003
R7004
R7007
R7014
R7017
SC6000
SC6001
SC6003
SIM1
SIM2 SIM3
SIM4UP
TH4000
TP_EMMC4000
TP_GYRO_INT
TP_HB_SW_SEL0
TP_HB_SW_SEL1
TP_NFC_1P8_EN
TP_NFC_CLK_REQ
TP_NFC_FIRM
TP_NFC_IRQ
TP_RFFE2_CLK
TP_RFFE2_DATA
TP_RST_SW1000
TP_SPEEDY_PMIC
TP_UB0 TP_UB1
TP_XCP_RF_ON4000
TP_XGNSS_GPLL_ANA_EXT
TP_XRTC_XTO
TP4000
TP4001
TP4002
TP4003
TP5000
TP5002
TP5004
TP5005
TP5006
TP5008
TP5009
TP5010
TP5011
TP5013
TP5014
TP5015
TP5016
TP5017
TP5018
TP5019
TP7004
TP7005
TP7006
U2001
U3000
U3001
U3005
U3006
U3013
U3014
U3016
U4003
U4004
U5013
U5019
U6008
U6009
U6013
U7000
U7004
U7005
U7009
U7011
U7013
U7176
U7207
U7208
U7209
UCP721
UME5000
ZD3000
ZD3001
ZD5001
ZD6000
ZD6001
ZD6002
ZD6004
ZD6005 ZD6006
ZD6007
ZD6016 ZD6017
ZD6018
ZD6019
ZD6020
ZD6021
ZD6022
ZD7000
ZD7010
ZD7011
Model : SM-A750G
Revision : REV0.3
Manufacture Count : 200
Charge : 전훈남
Contact : 010-9492-7361
Date : 09/05
Routing :
Resin :
SM-A750G
ANT2000
ANT2001
ANT2002
ANT3000
ANT3001
ANT3002
ANT3003
ANT5000
ANT5001
ANT5002
ANT5003
ANT5004
ANT5005
ANT5006
ANT5007
ANT5008
ANT5009
ANT5010
ANT5011
ANT5012
ANT5013
BB_IQB
C1000
C1001
C1002
C1003
C1004
C1005
C1006
C1007
C1008
C1009
C1010
C1011
C1012
C1013
C1014
C1015
C1016
C1018
C1019
C1020
C1021
C1022
C1023
C1024
C1026
C1027
C1028
C1029
C1030
C1031
C1032
C1033
C1034
C1035
C1036
C1037
C1038
C1039
C1040
C1041
C1042
C1043
C1044
C1045
C1047
C1048
C1049
C1050
C1051
C1052
C1053
C1054
C1055
C1056
C1057
C1058
C1059
C1060
C1061
C1062
C1063
C1064
C1065
C1066
C1067
C1068
C1069
C1070
C1071
C1072
C1073
C1074
C1075
C1076
C1077
C1078
C1079
C1080
C1081
C1082 C1083
C1084
C1085
C1086
C1087
C1089
C1090
C1091
C1092
C1093
C1094
C1095
C1096
C1097
C1098
C1099
C1100
C1101
C1102
C1103
C1104
C1105
C1106
C1107
C1108
C1109
C1110
C1111
C1112
C1115
C1116
C1117
C1118
C1119
C1120
C1122
C1123
C1124
C1125
C1127
C2000
C2001
C2002
C2003
C2004
C2005
C2006
C2007
C2008
C2009
C2011
C2012
C2013
C2014
C2015
C2016
C2017
C2018
C2019
C2020
C2021
C2023
C2024
C2025
C2026
C2029
C2030
C2031
C2032
C2033
C2034
C2035
C2036
C2037
C2039
C2046
C2048
C2050
C2051
C2052
C2053
C2054
C2055
C2056
C2057
C2061
C2062
C2063
C2064
C2065
C2066
C2067
C2068
C2069
C2071
C2072
C2073
C2075
C2076
C2077
C2078
C2079
C2080
C2081
C2089
C2091
C2095
C3000
C3001
C3004
C3005
C3007
C3008
C3009
C3010
C3013
C3018
C3019
C3020
C3021
C3023
C3024
C3025
C3030
C3032
C3033
C3043
C3044
C3045
C3046
C3047
C3048
C3049
C3050
C3051
C3052
C3053
C3054
C3056
C3058
C3061
C3064
C3065
C3066
C3067
C3068
C3069
C3070
C3072
C3073
C3074
C3076
C3077
C3078
C3080
C3081
C3082
C3083
C3084
C3085
C3086
C3088
C3089
C4001
C4002
C4003
C4006
C4007
C4008
C4009
C4010
C4011
C4013
C4014
C4015
C4017
C4018
C4020
C4023
C4024
C4025
C4026
C4027
C4028
C4029
C4030
C4034
C4035
C4037
C4038
C4039
C4040
C4041
C4042
C4043
C4044
C4045
C4046
C4047
C4048
C4049
C4050
C4051
C4052
C4053
C4054
C4055
C4056
C4057
C4058
C4059
C4060
C4061
C4062
C4063
C4064
C4065
C4066
C4067
C4068
C4069
C4070
C4071
C4072
C4073
C4083
C4084
C4085
C4086
C4087
C4088
C4089
C4091
C4092
C4093
C4094
C4095
C4096
C4097
C4098
C4099
C4100
C4101
C4102
C4103
C4104
C5000
C5001
C5003
C5004
C5005
C5006
C5007
C5008
C5009
C5011
C5012
C5013
C5014
C5015
C5016
C5025
C5027
C5028
C5030
C5035
C5036
C5037
C5038
C5039
C5040
C5041
C5042
C5043
C5044
C5045
C5046
C5047
C5048
C5049
C5050
C5051
C5052
C5053
C5054
C5055
C5056
C5058
C5061
C5062
C5063
C5064
C5068
C5070
C5071
C5080
C5081
C5082
C5084
C5085
C5089
C5090
C5091
C5092
C5093 C5094
C5097
C5098
C5103
C5104
C5105
C5106
C5107
C5108
C5109
C5110
C5113
C5116
C5120
C5121
C5122
C5124
C5125
C5126
C5129
C6006
C6007
C6008
C6010
C6011
C6012
C6016
C6017
C6018
C6020
C6023
C6024
C6025
C6026
C6030
C6031
C6032
C6033
C6034
C6035
C6037
C6038
C6041
C7005
C7006
C7007
C7009
C7010
C7013
C7014
C7016
C7022
C7024
C7025
C7026
C7027
C7028
C7030
C7031
C7032
C7033
C7034
C7035
C7036
C7037
C7038
C7039
C7053
C7054
C7055
C7056
C7058
C7059
C7061
C7068
C7069
C7070
C7071
C7072
C7073
C7074
C7075
C7076
C7081
C7082 C7083
C7084 C7085 C7086
C7088
C7089
C7147
C7151
C7153
C7154
C7155
C7156
C7157
CON6000
D6000
F1000
F1001
F1002
F1003
F1004
F1005
F1006
F1007
F1008
F1009
F1010
F1011
F2000
F2001
F2002
F2003
F2004
F2005
F3000
F3001
F3002
F3003
GA7001
HDC4000
HDC5000
HDC6000
HDC7002
HDC7004
L1000
L1001
L1002
L1003
L1004
L1005
L1006
L1007
L1008
L1009
L1010
L1011
L1012
L1013
L1014
L1015
L1016
L1017
L1018
L1019
L1020
L1021
L1023
L1024 L1025
L1026
L1027
L1028
L1029
L1030
L1031
L1032
L1033
L1034
L1035
L1036
L1037
L1038
L1039
L1040
L1041
L1042
L1043
L1044
L1045
L1046
L1047
L1048
L1049
L1050
L1051
L1052
L1053
L1054
L1055
L1056
L1057
L1058
L1059
L1060
L1061
L1062
L1063
L1064
L1065
L1066
L1067
L1068
L1070
L1071
L1072
L1073
L1074
L1075
L1076
L1077
L2000
L2001
L2002
L2003
L2004
L2005
L2006
L2007
L2008
L2009
L2010
L2011
L2012
L2013
L2016
L2017
L2018
L2019
L2021
L2022
L2023
L2025
L2026
L2027
L2028
L2030
L2031
L2032
L2034
L2035
L2036
L2046
L2049
L2059
L3000
L3001
L3002
L3003
L3004
L3005
L3007
L3008
L3009
L3010
L3011
L3012
L3013
L3014
L3015
L3016
L3017
L3018
L3019
L3020
L5000
L5001
L5002
L5003
L5004
L5005
L5006
L5007
L5009
L6002
L6004
L6005
L6008
L6009
L6010
L6011
L6012
L6013
L6014
L7002
L7004
L7005
L7006
L7007
L7008
L7009
L7010
L7011
L7012
LED5000
MIC6000
OSC2000
OSC3000
OSC5000
PAM1000
R1002
R1003
R1004
R1005
R1006
R1007
R1008
R1009
R2000
R2002
R2003
R3000
R3011
R3012
R4008
R4010
R4025
R4026
R5001
R5002
R5003
R5012
R5013
R5017
R6000
R6001
R6002
R6003
R6004
R6005
R6006
R6008
R6018
R6019
R6022
R6024
R6026
R6027
R6030
R6031
R6032
R6034
R6035
R6036
R6037
R6038
R6039
R6041
R6042
R7005
R7006
R7015
RFS1000
RFS1001
SC6002
SC6004
SC6005
SC6008
TH1000
TP_3000
TP_BT_SPDY_FROM_S3000
TP_BT_SPDY_TO_S3000
TP_DISP_TE
TP_OLED_RST
TP_PMIC_AP32K
TP_RFFE0_CLK
TP_RFFE0_DATA
TP_WLAN_SPDY_FROM_S3000 TP_WLAN_SPDY_TO_S3000
TP5001
TP5003
TP5007
TP5012
TP6000
TP6001 TP6002
TP6003
U1000
U1001
U1002
U1003
U1004
U1005
U1007
U1008
U1009
U1013
U1015
U2000
U2002
U2005
U2006
U2010
U3002
U3003
U3004
U3008
U3012
U3017
U3018
U3019
U5000
U5021
U6000
U6017
U6020
U7002
U7003
U7006
U7007
U7008
U7016 U7017
U7018
U7019
U7173
U7174
U7211
U7212
V7003
ZD1000
ZD5000
ZD5002
ZD5003
ZD5004
ZD5005 ZD5006 ZD5011
ZD5012
ZD6003
ZD6009
ZD6010
ZD6011
ZD6013
ZD6014
ZD6015
ZD7002
ZD7007
ZD7008 ZD7009
Model : SM-A750G
Revision : REV0.3
Manufacture Count : 200
Charge : 전훈남
Contact : 010-9492-7361
Date : 09/05
Routing :
Resin :
SM-A750G
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-3. Flow chart of Troubleshooting.
Oscilloscope Digital Multimeter
Power Supply + driver, ESD Safe Tweezer
8960 & Spectrum Analyzer Soldering iron
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-1. Power On
Mobile phone does not power on.
Yes
No
Charging the battery by TA.
If its voltage level is extremely low
(under 3.0V),
Change the battery.
Yes
END
Yes
Power-on the phone and check
the power-on sound
or motor Vibration.
Sound or Vibration is ok?
Yes
Change the FRONT-LCD ASSY
No
Check the voltage level at
R5017 while pressing power
key. Is the voltage high?
No
Replace the Power key FPCB
Yes
Check the signal of
TRST_N = 1.8V
No
Check the output voltage of U5000
L5000 > 0.8V, L5001 > 0.8V, L5002
> 0.8V,
L5003 > 0.8V, L5004 > 0.8V, L5005
> 1.1V,
L5006 > 1.3V, L5007 > 2.0V, L5009
> 0.8V and other LDO Voltage
If the output voltage is not normal,
Change the U5000
※ Each voltage level has ±10% margin
Yes
Check the Clock OSC5000
Is the frequency 32.768kHz?
No
Replace the OSC5000
※ Test condition (Oscilloscope setting)
: 20.0us.div (time division)
Yes
Check the initial operation
Check the Battery Voltage.
Is it more than 3.8V?
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-2. Initial
Initial Failure
Yes
Yes
END
Abnormal
Re Check "Power on"
Trouble shooting process
Abnormal Check the OSC5000
(Crack, open etc.)
Check the U5000 (Crack etc)
Normal
Change U5000
Re-download latest SW on the
mobile phone
Abnormal
Change PBA
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-3. No Service
No service
Yes
Yes
END
Check the Voltage
L2031 : 1.8V, C2086 : 1.2V
L2034 : 1.8V
No
Replace the U5000
Home screen → Phone →
Keypad → *#1234# → Check
Phone version → CP :
N950FXXXX or unkown
Yes
CP : A750XXXXX
Check the connection of RF coaxial cable
Check the clock OSC5000
Is the frequency 32.768KHz?
No
Yes
Replace the OSC5000
Replace the U2010
Yes
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-4. SIM Part
Insert SIM card
Yes
Yes
END
Check the SIM Voltage.
= 1.8V(C6029) or
3.0V(C6015)?
No
Change to the new SIM card.
If it doesn`t still work SIM card after
changing
the SIM card, Check the U5000 (Crack
etc)
Is SIM socket ok?
Yes
No
Replace SIM socket
Check the SIM RST / IO / CLK.
(SIM1 : ZD6017-4, ZD6017-2, ZD6017-3)
(SIM2 : ZD6016-4, ZD6016-2, ZD6016-3)
Is signal ok?
No
Yes
Check the UCP721 (Crack etc)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-5. T-Flash Part
Insert T-Flash card
Yes
Yes
END
Check the T-flash Voltage.
(C6000) = 3.0V?
No
Change to the new T Flash card.
If it doesn`t still work T Flash card after
changing
the T FLASH, Check the U5000
(Crack etc)
Is SIM socket ok?
Yes
No
Replace SIM socket
Check the t-flash
CMD /Data/CLK.
(ZD6000, ZD6021, ZD6020)
Is signal ok?
No
Yes
Check the UCP721 (Crack etc)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-6. Cable Charging Part
Insert TA / USB
Yes
Yes
END
Check the
VBUS_5V_OVP(L5008)=5V
No
Replace U6020
Charging Sequence Start
VBUS_IF_5P0(C9038) = 5V
Yes
No
Replace SUB PBA
Battery is Charging?
No
Yes
Replace U5000
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-7. OTG
OTG does not work
Yes
Yes
END
Check the
VBUS_5V_OVP(L5008) = 5V
No
Check U6020
(crack, open, damaged, etc.)
Check the
VBUS_5V(C9038) = 5V
Yes
No
Check U5000
(crack, open, damaged, etc.)
Check OTG working ?
No
Yes
Replace SUB PBA
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-8-1. Magnetic Sensor
Magnetic Sensor does not work
Yes
Yes
END
Check R3011, R3012
(I2C is OK?)
No
Replace U3018
Check the voltage
C3058 =1.8V
Yes
No
Replace U3003
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-8-2. 6Axis Sensor
6Axis Sensor does not work
Yes
Yes
END
Check 6Axis
SCL, SDA pin
(I2C is OK?)
No
Replace U3017
Check the voltage
C3065 =1.8V
Yes
No
Replace U3003
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-8-3. Proximity
Proximity Sensor does not work
Yes
Check the voltage
C3062 =3.3V
(Sensor’s LED voltage)
No
Replace U3014
Check the voltage
C3063 =1.8V
(Sensor’s IO voltage)
Yes
No
Replace U3003
Check SDA, SCL of U3016
(I2C is OK?)
No
Yes
Replace U3016
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-8-4. Hall Sensor
Hall Sensor of Sub PBA does not work
Yes
No
END
Check U9006
(crack, damaged, etc.)
Replace U9006
Check the voltage
C9032 =1.8V
Yes
No
Replace U5000
Yes
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-8-5. Fingerprint Sensor
END
Replace the Fingerprint sensor module
Yes
Fingerprint Sensor does not work
Yes
Yes
Check the voltage
C5120 =3.3V
C5126 = 1.8V
No
Replace U5021
Check the Fingerprint Sensor
connector on Rear Assy
Yes
No
Reconnect or Replace the Sensor FPCB
Check the Fingerprint Sensor
MISO, MOSI, CLK, CS_N Pins
(SPI is OK?)
No
Yes
Replace UCP721
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-9-1. Microphone Part - Main MIC
Check main microphone function
in voice call Handset mode or voice recorder
Yes
Check the voltage of
L9015 at board = 2.8V
No
Resolder or replace Earjack FPCB
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-9-2. Microphone Part - Sub(2nd) MIC
Check Sub(2nd) microphone function
in voice call loudSPK mode
or in camcording mode
Yes
Check the voltage at
L6006 = 2.8V
No
Replace U5000
Yes
END
Check the
SUB_MIC_DATA at
C6022?
Yes
No
Replace MIC6000
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-10. Speaker Part
Check speaker function.
Play MP3 with maximum volume level.
Yes
Check C-clips of Sub PBA
ANT9002, ANT9003
No
Replace C-Clip
Yes
Yes
END
Replace speaker module
Check the PWM
output at
ANT9003,ANT9003
No
Replace U6000
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-11. Receiver Part
Check receiver function
in voice call receiver mode
Yes
Check RCV module
where RCV's placed
for any damage
No Resolder or Replace
ANT6000, ANT6001
Yes
Check the signals on
U6008, L6003
No
Resolder or replace L6008, L6003
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-12. BT/WIFI
BT/WIFI is not working
Yes
No
Enable BT or WIFI function.
Yes
END
Yes
Check the status of ANT3000
No
Resolder or change the
ANT3000, REAR
Yes
Check the Status of C3030, L3001,
F3003, L3002, F3000, C3032,
C3070, U3019, L3020, C3067
No Resolder or Replace of
C3030, L3001, F3003, L3002, F3000,
C3032, C3070, U3019, L3020, C3067
Resolder or change U3004
Check BT or WIFI function ON
Yes
Yes
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-13. GPS
GPS is not working
Yes
No
Enable GPS Function in the setting.
Yes
END
Yes
Check the Antenna connect
ANT3003
No 1. Resolder or Replace
ANT3003
2. Replace REAR
Yes
Check(crack,open,etc)
L3010, L3011, C3076, F3001, C3044,
C3045, U3008, C3046, L3013, F3002,
L3014
No
Resolder or change the wrong element
(open, crack, deviation, etc)
Yes
Check 24MHz Clock at output
of OSC2000
No Check OSC2000
(short, open, crack, etc.)
Yes
No
Resolder or change U2010
Check GPS function ON
Check the voltage on
L2035=1.8V
Check U5000
(short, open, crack, etc.)
Yes
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-14. NFC
NFC is not working
Yes
No
Enable NFC Function
Yes
END
Yes
Check the Antenna contact
ANT3001, ANT3002
No 1. Resolder or Replace ANT3001, ANT3002
2. Replace NFC ANT
Yes
Check the Voltage on
C3075 = 1.8V or 3.0V
No Check U3006
(crack, open, damaged, etc.)
Yes
Check 26MHz Clock at
TP_NFC_CLK
No
Check UCP721
Yes
Check the Status of C3034, C3041,
L3006, U3005
No
Resolder or Replace C3034, C3041,
L3006, U3005
Yes
Resolder or Replace U3006
Check NFC function ON
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-15. FM radio part
FM is not working
Yes
No
Enable FM Function.
Yes
END
Yes
Check the voltage of
C3005 = 1.8V
No
Resolder or Replace U5000
Yes
Check the status of L3000, C3020,
C6041, C6031, SUB PBA Is it ok?
No
Resolder of Replace L3000, C3020,
C6041, C6031, SUB PBA
Resolder or Replace
U3004
Yes
Check the FMfunction
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-16. Display
LCD is still off after PWR ON
Yes
No
Reconnect the HDC7004
END
Yes
Check
VDD_LCD_3P0=3.0V(C7083)
VDD_LCD_1P8=1.8V(C7082)
VDD DDR 1P5=1.5V(C7081)
No
Resolder or Replace the U5000
Yes
Check
ELVDD 4P6 = 4.6V (C7085)
ELVSS_-4P4=-5.4~-1.4V(C7086)
ELAVDD_7P3=5.8~7.9V(C7084)
No
Resolder or Replace the U7007
Yes
Check the connection of
HDC7004
Replace the Display module
Yes
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-17. Triple Camera
Yes
END
Check the voltage
C7003 : 2.8V , C7034 : 1.05V
C7043 : 1.8V , C7045 : 2.8V
C7145 : 1.2V , C7062 : 2.8V
C7018 : 1.8V , C7067 : 2.8V
No
Yes
No
Replace the PBA
“Camera” function does not work
Yes
No
Reconnect the HDC7000, HDC7001, HDC7003
Yes
Check the Camera connector on Main
PBA
Yes
Replace the camera module
Check the CAM_MCLK is
26MHz (C7011)
Resolder or Replace U7005, U7006, U7009, U7011,
U7013, U7004, U7000
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-18. VT CAMERA
“Camera” function does not work
Yes
No
Reconnect the HDC7002
Yes
END
Yes
Check the voltage
C7024 : 2.8V
C7027 : 1.05V
No
Resolder or Replace U7003, U7002
Yes
No
Replace the PBA
Yes
Replace the Front camera module
Check the Camera connector on Main
PBA
Check the VTCAM_MCLK is
26MHz (R7001)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-19. TSP
Touch Screen does not work
Yes
No
Reconnect the HDC7004
Yes
END
Yes
Check the voltage
VDD_1P8_1P8(R7007)=1.8V
VDD_TSP_A3P0(C7088)=3.3V
No
Resolder or Replace U5000, U7019
Yes
Replace the Display module
Check TSP Connector on
MAIN PBA
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-20. Motor
Motor does not work
Yes
No
Resolder or Reconnect
ANT9008, ANT9007
Yes
END
Yes
Check L9026 and L9027 on SUB PBA
(crack,open,etc)
No
Resolder or Replace
L9026, L9027
Yes
No Resolder or Replace C9037
or
Replace : U5019
Yes
Replace Motor
Check the Clip on SUB PBA
ANT9008 and ANT9007
CheckthevoltageC9037onMAINPBA
C9037=3.3V
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-21. GSM 850/900, WCDMA B5/8, LTE B5/8/12/13/17/20/28 PRx
END
Check ant path any damage
(RFS1000 ~ PRX ANT LB)
Is it ok?
Check RX path any damage
(U1003~U2010)
Is it ok?
Check U1003, U2010
any damage
(Crack, open, etc), is it ok?
Change the board
Resolder or change
Antenna path components
Resolder or change
RX path components
Resolder or change
U1003, U2010
NO
NO
NO
YES
YES
YES
YES
YES
It is not catching the channel
In normal condition
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-22. LTE B7/38/40/41 PRx
END
Check ant path any damage
(RFS1001 ~ U1003)
Is it ok?
Check RX path any damage
(U1003~U2010)
Is it ok?
Check U1003, U2010
any damage
(Crack, open, etc), is it ok?
Change the board
Resolder or change
Antenna path components
Resolder or change
RX path components
Resolder or change
U1003, U2010
NO
NO
NO
YES
YES
YES
YES
YES
It is not catching the channel
In normal condition
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-23. GSM DCS/PCS, WCDMA B1/2/4, LTE B1/2/3/4/66 PRx
END
Check ant path any damage
(RFS1000 ~ PRX ANT MB)
Is it ok?
Check RX path any damage
(U1003~U2010)
Is it ok?
Check U1003, U2010
any damage
(Crack, open, etc), is it ok?
Change the board
Resolder or change
Antenna path components
Resolder or change
RX path components
Resolder or change
U1003, U2010
NO
NO
NO
YES
YES
YES
YES
YES
It is not catching the channel
In normal condition
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-24. GSM 850/900, WCDMA B5/8, LTE B5/8/12/13/17/20/28 DRx
END
Check ant path any damage
(Ant2000 ~ DRX_ANT LB)
Is it ok?
Check RX path any damage
(U2000~U2010)
Is it ok?
Check U2000, U2010
any damage
(Crack, open, etc), is it ok?
Change the board
Resolder or change
Antenna path components
Resolder or change
RX path components
Resolder or change
U2000, U2010
NO
NO
NO
YES
YES
YES
YES
YES
It is not catching the channel
In normal condition
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-25. LTE B7/38/40/41 DRx
END
Check ant path any damage
(Ant2000 ~ DRX_ANT HB)
Is it ok?
Check RX path any damage
(U2000~U2010)
Is it ok?
Check U2000, U2010
any damage
(Crack, open, etc), is it ok?
Change the board
Resolder or change
Antenna path components
Resolder or change
RX path components
Resolder or change
U2000, U2010
NO
NO
NO
YES
YES
YES
YES
YES
It is not catching the channel
In normal condition
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-26. GSM DCS/PCS, WCDMA B1/2/4, LTE B1/2/3/4/66 DRx
END
Check ant path any damage
(Ant2000 ~ DRX_ANT MB)
Is it ok?
Check RX path any damage
(U2000~U2010)
Is it ok?
Check U2000, U2010
any damage
(Crack, open, etc), is it ok?
Change the board
Resolder or change
Antenna path components
Resolder or change
RX path components
Resolder or change
U2000, U2010
NO
NO
NO
YES
YES
YES
YES
YES
It is not catching the channel
In normal condition
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-27. GSM 850/900, WCDMA B5/8, LTE B5/8/12/13/17/20/28 TX
END
Check ant path any damage
(RFS1000 ~ PRX_ANT LB)
Is it ok?
Check TX path any damage
(U1003~U1008)
Is it ok?
Check TX path any damage
(U1008~U2010)
Is it ok?
Change the board
Resolder or change
Antenna path components
Resolder or change
TX path components
Resolder or change
TX path components
NO
NO
NO
YES
YES
YES
YES
YES
It is not catching the channel
In normal condition
Check U1003, U1008, U2010
any damage
(Crack, open, etc), is it ok?
Resolder or change
U1003, U1008, U2010
NO
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-28. LTE B7/38/40/41 Tx
END
Check ant path any damage
(Ant1005 ~ U1003)
Is it ok?
Check TX path any damage
(U1003~PAM1000)
Is it ok?
Check TX path any damage
(PAM1000~U1053)
Is it ok?
Change the board
Resolder or change
Antenna path components
Resolder or change
TX path components
Resolder or change
TX path components
NO
NO
NO
YES
YES
YES
YES
YES
It is not catching the channel
In normal condition
Check U1003, PAM1000, U1053
any damage
(Crack, open, etc), is it ok?
Resolder or change
U1003, PAM1000, U1053
NO
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-29. GSM DCS/PCS, WCDMA B1/2/4, LTE B1/2/3/4/66 Tx
END
Check ant path any damage
(RFS1000 ~ PRX_ANT MB)
Is it ok?
Check TX path any damage
(U1003~U1008)
Is it ok?
Check TX path any damage
(U1008~U2010)
Is it ok?
Change the board
Resolder or change
Antenna path components
Resolder or change
TX path components
Resolder or change
TX path components
NO
NO
NO
YES
YES
YES
YES
YES
It is not catching the channel
In normal condition
Check U1003, U1008, U2010
any damage
(Crack, open, etc), is it ok?
Resolder or change
U1003, U1008, U2010
NO
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-5. Service Schematics
- NC Point(Top View)

More Related Content

What's hot

Calor sensível, capacidade térmica e calor específico
Calor sensível, capacidade térmica e calor específicoCalor sensível, capacidade térmica e calor específico
Calor sensível, capacidade térmica e calor específico
Paulo Alexandre
 
Termodinamica
TermodinamicaTermodinamica
Termodinamica
João André
 
Magnetismo
MagnetismoMagnetismo
Magnetismo
Rildo Borges
 
Termodinâmica (2017)
Termodinâmica (2017)Termodinâmica (2017)
Termodinâmica (2017)
Marco Antonio Sanches
 
Calorimetria
CalorimetriaCalorimetria
Calorimetria
O mundo da FÍSICA
 
Trocas de calor
Trocas de calorTrocas de calor
Trocas de calor
Cristiane Ruas
 
Estudo dos gases
Estudo dos gasesEstudo dos gases
Estudo dos gases
Beatriz Dantas
 
Física, gases perfeitos.
Física, gases perfeitos.Física, gases perfeitos.
Física, gases perfeitos.
Matheus Bezerra
 
Aula 7 dilatação
Aula 7   dilataçãoAula 7   dilatação
Aula 7 dilatação
Montenegro Física
 
Dilatação térmica dos líquidos
Dilatação térmica dos líquidosDilatação térmica dos líquidos
Dilatação térmica dos líquidos
O mundo da FÍSICA
 
Transmissao de calor
Transmissao de calorTransmissao de calor
Transmissao de calor
Rildo Borges
 
Processos de transmissão de calor
Processos de transmissão de calorProcessos de transmissão de calor
Processos de transmissão de calor
O mundo da FÍSICA
 
diagrama em fases
diagrama em fasesdiagrama em fases
diagrama em fases
wilkapedro
 
Ondas Eletromagnéticas-Noções
Ondas Eletromagnéticas-NoçõesOndas Eletromagnéticas-Noções
Ondas Eletromagnéticas-Noções
luizamferreira
 
Calor e mudanças do estado físico da matéria
Calor e mudanças do estado físico da matériaCalor e mudanças do estado físico da matéria
Calor e mudanças do estado físico da matéria
Iana Nicole
 
Propagação de Calor
Propagação de CalorPropagação de Calor
Propagação de Calor
Bruno De Siqueira Costa
 
Calorimetria
CalorimetriaCalorimetria
Calorimetria
jardeanny alencar
 
Dilatação térmica
Dilatação térmicaDilatação térmica
Dilatação térmica
Daniela F Almenara
 
Dilatacao térmica volumetrica
Dilatacao térmica volumetricaDilatacao térmica volumetrica
Dilatacao térmica volumetrica
Eloir De Carli
 
Calorimetria
CalorimetriaCalorimetria
Calorimetria
Rildo Borges
 

What's hot (20)

Calor sensível, capacidade térmica e calor específico
Calor sensível, capacidade térmica e calor específicoCalor sensível, capacidade térmica e calor específico
Calor sensível, capacidade térmica e calor específico
 
Termodinamica
TermodinamicaTermodinamica
Termodinamica
 
Magnetismo
MagnetismoMagnetismo
Magnetismo
 
Termodinâmica (2017)
Termodinâmica (2017)Termodinâmica (2017)
Termodinâmica (2017)
 
Calorimetria
CalorimetriaCalorimetria
Calorimetria
 
Trocas de calor
Trocas de calorTrocas de calor
Trocas de calor
 
Estudo dos gases
Estudo dos gasesEstudo dos gases
Estudo dos gases
 
Física, gases perfeitos.
Física, gases perfeitos.Física, gases perfeitos.
Física, gases perfeitos.
 
Aula 7 dilatação
Aula 7   dilataçãoAula 7   dilatação
Aula 7 dilatação
 
Dilatação térmica dos líquidos
Dilatação térmica dos líquidosDilatação térmica dos líquidos
Dilatação térmica dos líquidos
 
Transmissao de calor
Transmissao de calorTransmissao de calor
Transmissao de calor
 
Processos de transmissão de calor
Processos de transmissão de calorProcessos de transmissão de calor
Processos de transmissão de calor
 
diagrama em fases
diagrama em fasesdiagrama em fases
diagrama em fases
 
Ondas Eletromagnéticas-Noções
Ondas Eletromagnéticas-NoçõesOndas Eletromagnéticas-Noções
Ondas Eletromagnéticas-Noções
 
Calor e mudanças do estado físico da matéria
Calor e mudanças do estado físico da matériaCalor e mudanças do estado físico da matéria
Calor e mudanças do estado físico da matéria
 
Propagação de Calor
Propagação de CalorPropagação de Calor
Propagação de Calor
 
Calorimetria
CalorimetriaCalorimetria
Calorimetria
 
Dilatação térmica
Dilatação térmicaDilatação térmica
Dilatação térmica
 
Dilatacao térmica volumetrica
Dilatacao térmica volumetricaDilatacao térmica volumetrica
Dilatacao térmica volumetrica
 
Calorimetria
CalorimetriaCalorimetria
Calorimetria
 

Similar to A70 (sm-A750FN).pdf

I phone 5 full Schematic Diagram 820 3141-b
I phone 5 full Schematic Diagram 820 3141-bI phone 5 full Schematic Diagram 820 3141-b
I phone 5 full Schematic Diagram 820 3141-b
diyfix phone
 
esp32-pico-d4_datasheet_en.pdf
esp32-pico-d4_datasheet_en.pdfesp32-pico-d4_datasheet_en.pdf
esp32-pico-d4_datasheet_en.pdf
raimon ribal
 
L3 Schematics XT1580-XT1581-XT1585 V1.0 (1).pdf
L3 Schematics XT1580-XT1581-XT1585 V1.0 (1).pdfL3 Schematics XT1580-XT1581-XT1585 V1.0 (1).pdf
L3 Schematics XT1580-XT1581-XT1585 V1.0 (1).pdf
carlosrubiogarcia1
 
ECS H77H2-M4 rA.pptx
ECS H77H2-M4 rA.pptxECS H77H2-M4 rA.pptx
ECS H77H2-M4 rA.pptx
ssusercda6b5
 
eece237lab2EECE237Lab2.uvproj 1.1 ### uVision .docx
eece237lab2EECE237Lab2.uvproj    1.1   ### uVision .docxeece237lab2EECE237Lab2.uvproj    1.1   ### uVision .docx
eece237lab2EECE237Lab2.uvproj 1.1 ### uVision .docx
SALU18
 
Z390 Designare REV1.0.pdf
Z390 Designare REV1.0.pdfZ390 Designare REV1.0.pdf
Z390 Designare REV1.0.pdf
QuangSngBi
 
avenger96-schematics.pdf
avenger96-schematics.pdfavenger96-schematics.pdf
avenger96-schematics.pdf
OskarsAni
 
Pic16F887
Pic16F887Pic16F887
Pic16F887
wolf3245
 
Axsy som-sama5 d3 description
Axsy som-sama5 d3 descriptionAxsy som-sama5 d3 description
Axsy som-sama5 d3 description
Alexey Yurko
 
16 f887
16 f88716 f887
16 f887
lala
 
LTE 4G FDD GPS tracker TK419 -Eelink
LTE 4G FDD GPS tracker TK419 -Eelink LTE 4G FDD GPS tracker TK419 -Eelink
LTE 4G FDD GPS tracker TK419 -Eelink
Eelink communication Technology Limited
 
Sch 28303 b
Sch 28303 bSch 28303 b
Sch 28303 b
Paula Herreño
 
IRJET- Development of Intelligent Accelerometer and its Implementation wi...
IRJET-  	  Development of Intelligent Accelerometer and its Implementation wi...IRJET-  	  Development of Intelligent Accelerometer and its Implementation wi...
IRJET- Development of Intelligent Accelerometer and its Implementation wi...
IRJET Journal
 
iPhone 6 Schematic
iPhone 6 SchematiciPhone 6 Schematic
iPhone 6 Schematic
Daniel Ferch
 
SmartZone 5.0
SmartZone 5.0SmartZone 5.0
SmartZone 5.0
Joseph Auby
 
z61ae.pdf
z61ae.pdfz61ae.pdf
z61ae.pdf
Anubys365
 
Rotork YTC YT-2500 Smart Valve Positioner PDF
Rotork YTC YT-2500 Smart Valve Positioner PDFRotork YTC YT-2500 Smart Valve Positioner PDF
Rotork YTC YT-2500 Smart Valve Positioner PDF
YTC INDIA
 
Msp430g2453
Msp430g2453Msp430g2453
Msp430g2453
Alejandro Gz
 
Schematics_88750_1_12M14.pdf
Schematics_88750_1_12M14.pdfSchematics_88750_1_12M14.pdf
Schematics_88750_1_12M14.pdf
ssuser38a5ec
 
Digital Weighing Transmitter with RS232/485 and analogue output
Digital Weighing Transmitter with RS232/485 and analogue outputDigital Weighing Transmitter with RS232/485 and analogue output
Digital Weighing Transmitter with RS232/485 and analogue output
General Measure
 

Similar to A70 (sm-A750FN).pdf (20)

I phone 5 full Schematic Diagram 820 3141-b
I phone 5 full Schematic Diagram 820 3141-bI phone 5 full Schematic Diagram 820 3141-b
I phone 5 full Schematic Diagram 820 3141-b
 
esp32-pico-d4_datasheet_en.pdf
esp32-pico-d4_datasheet_en.pdfesp32-pico-d4_datasheet_en.pdf
esp32-pico-d4_datasheet_en.pdf
 
L3 Schematics XT1580-XT1581-XT1585 V1.0 (1).pdf
L3 Schematics XT1580-XT1581-XT1585 V1.0 (1).pdfL3 Schematics XT1580-XT1581-XT1585 V1.0 (1).pdf
L3 Schematics XT1580-XT1581-XT1585 V1.0 (1).pdf
 
ECS H77H2-M4 rA.pptx
ECS H77H2-M4 rA.pptxECS H77H2-M4 rA.pptx
ECS H77H2-M4 rA.pptx
 
eece237lab2EECE237Lab2.uvproj 1.1 ### uVision .docx
eece237lab2EECE237Lab2.uvproj    1.1   ### uVision .docxeece237lab2EECE237Lab2.uvproj    1.1   ### uVision .docx
eece237lab2EECE237Lab2.uvproj 1.1 ### uVision .docx
 
Z390 Designare REV1.0.pdf
Z390 Designare REV1.0.pdfZ390 Designare REV1.0.pdf
Z390 Designare REV1.0.pdf
 
avenger96-schematics.pdf
avenger96-schematics.pdfavenger96-schematics.pdf
avenger96-schematics.pdf
 
Pic16F887
Pic16F887Pic16F887
Pic16F887
 
Axsy som-sama5 d3 description
Axsy som-sama5 d3 descriptionAxsy som-sama5 d3 description
Axsy som-sama5 d3 description
 
16 f887
16 f88716 f887
16 f887
 
LTE 4G FDD GPS tracker TK419 -Eelink
LTE 4G FDD GPS tracker TK419 -Eelink LTE 4G FDD GPS tracker TK419 -Eelink
LTE 4G FDD GPS tracker TK419 -Eelink
 
Sch 28303 b
Sch 28303 bSch 28303 b
Sch 28303 b
 
IRJET- Development of Intelligent Accelerometer and its Implementation wi...
IRJET-  	  Development of Intelligent Accelerometer and its Implementation wi...IRJET-  	  Development of Intelligent Accelerometer and its Implementation wi...
IRJET- Development of Intelligent Accelerometer and its Implementation wi...
 
iPhone 6 Schematic
iPhone 6 SchematiciPhone 6 Schematic
iPhone 6 Schematic
 
SmartZone 5.0
SmartZone 5.0SmartZone 5.0
SmartZone 5.0
 
z61ae.pdf
z61ae.pdfz61ae.pdf
z61ae.pdf
 
Rotork YTC YT-2500 Smart Valve Positioner PDF
Rotork YTC YT-2500 Smart Valve Positioner PDFRotork YTC YT-2500 Smart Valve Positioner PDF
Rotork YTC YT-2500 Smart Valve Positioner PDF
 
Msp430g2453
Msp430g2453Msp430g2453
Msp430g2453
 
Schematics_88750_1_12M14.pdf
Schematics_88750_1_12M14.pdfSchematics_88750_1_12M14.pdf
Schematics_88750_1_12M14.pdf
 
Digital Weighing Transmitter with RS232/485 and analogue output
Digital Weighing Transmitter with RS232/485 and analogue outputDigital Weighing Transmitter with RS232/485 and analogue output
Digital Weighing Transmitter with RS232/485 and analogue output
 

Recently uploaded

6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)
ClaraZara1
 
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
thanhdowork
 
Understanding Inductive Bias in Machine Learning
Understanding Inductive Bias in Machine LearningUnderstanding Inductive Bias in Machine Learning
Understanding Inductive Bias in Machine Learning
SUTEJAS
 
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
ihlasbinance2003
 
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prismsTechnical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
heavyhaig
 
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdfbasic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
NidhalKahouli2
 
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdfBPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
MIGUELANGEL966976
 
22CYT12-Unit-V-E Waste and its Management.ppt
22CYT12-Unit-V-E Waste and its Management.ppt22CYT12-Unit-V-E Waste and its Management.ppt
22CYT12-Unit-V-E Waste and its Management.ppt
KrishnaveniKrishnara1
 
Wearable antenna for antenna applications
Wearable antenna for antenna applicationsWearable antenna for antenna applications
Wearable antenna for antenna applications
Madhumitha Jayaram
 
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELDEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
gerogepatton
 
132/33KV substation case study Presentation
132/33KV substation case study Presentation132/33KV substation case study Presentation
132/33KV substation case study Presentation
kandramariana6
 
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptxML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
JamalHussainArman
 
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part IIIRecycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
Aditya Rajan Patra
 
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTCHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
jpsjournal1
 
sieving analysis and results interpretation
sieving analysis and results interpretationsieving analysis and results interpretation
sieving analysis and results interpretation
ssuser36d3051
 
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
nooriasukmaningtyas
 
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of contentGenerative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Hitesh Mohapatra
 
Low power architecture of logic gates using adiabatic techniques
Low power architecture of logic gates using adiabatic techniquesLow power architecture of logic gates using adiabatic techniques
Low power architecture of logic gates using adiabatic techniques
nooriasukmaningtyas
 
CSM Cloud Service Management Presentarion
CSM Cloud Service Management PresentarionCSM Cloud Service Management Presentarion
CSM Cloud Service Management Presentarion
rpskprasana
 
Properties Railway Sleepers and Test.pptx
Properties Railway Sleepers and Test.pptxProperties Railway Sleepers and Test.pptx
Properties Railway Sleepers and Test.pptx
MDSABBIROJJAMANPAYEL
 

Recently uploaded (20)

6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)
 
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
 
Understanding Inductive Bias in Machine Learning
Understanding Inductive Bias in Machine LearningUnderstanding Inductive Bias in Machine Learning
Understanding Inductive Bias in Machine Learning
 
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
 
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prismsTechnical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
 
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdfbasic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
 
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdfBPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
 
22CYT12-Unit-V-E Waste and its Management.ppt
22CYT12-Unit-V-E Waste and its Management.ppt22CYT12-Unit-V-E Waste and its Management.ppt
22CYT12-Unit-V-E Waste and its Management.ppt
 
Wearable antenna for antenna applications
Wearable antenna for antenna applicationsWearable antenna for antenna applications
Wearable antenna for antenna applications
 
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELDEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
 
132/33KV substation case study Presentation
132/33KV substation case study Presentation132/33KV substation case study Presentation
132/33KV substation case study Presentation
 
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptxML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
 
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part IIIRecycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
 
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTCHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
 
sieving analysis and results interpretation
sieving analysis and results interpretationsieving analysis and results interpretation
sieving analysis and results interpretation
 
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
 
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of contentGenerative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
 
Low power architecture of logic gates using adiabatic techniques
Low power architecture of logic gates using adiabatic techniquesLow power architecture of logic gates using adiabatic techniques
Low power architecture of logic gates using adiabatic techniques
 
CSM Cloud Service Management Presentarion
CSM Cloud Service Management PresentarionCSM Cloud Service Management Presentarion
CSM Cloud Service Management Presentarion
 
Properties Railway Sleepers and Test.pptx
Properties Railway Sleepers and Test.pptxProperties Railway Sleepers and Test.pptx
Properties Railway Sleepers and Test.pptx
 

A70 (sm-A750FN).pdf