project review of my UG

1. A SMART BABY WATCH FOR
MONITORING SUDDEN INFANT
DEATH SYNDROME
Guided By:
Ms R.Aruna Devi ME
AP/ECE
Presented By:
Abinaya Thillai(953513106002)
Athulya Suresh(953513106010)
Naatchammai Ramanathan(953513106039)
Sindhuja Ramesh(953513106068)

2. PROJECT MODULES
WEARABLE IoT
DEVICE
GATEWAY
•HEART RATE SENSOR
•INFANT’S POSTURE
•BREATHING RATE
SENSOR
•BODY TEMPERATURE
CLOUD
WS
W
B
DB
•WS-WEB
SERVICES
•WB-WEBSITE
•DB-DATABASE
•DATAS-

3. WEARABLE IoT DEVICE
TMP007
BATTERY
LEVEL
LSM330DLC
LSM330DLC
AD8232
GBAN-2530(A SMALL FACTOR OF CC2530 SoC)

4. WEARABLE IoT DEVICE
ILLUSTRATION
Fig2:Chest belt with textile electrode and an inset of developed
hardware for the acquisition parameters

6. INFANT POSTURE
 Detect the position of infant during sleep
 LSM330DLC inertial sensor is used without
gyroscope
 Set threshold value to minimize the small
fluctuations in accelerometer and it allows to
control the tilt angle posture
 Position gets updated when there is a valid
change
 3D-accelarator is to recognize the force of gravity
 ‘A’-Infant is lying on his back
 ‘B,D’-Infant is lying on his side
 ‘C’-Infant is lying on his stomach

7. POSITION CHANGE
Fig 3:Acceleration variation on each axis over
position change
A B C D

8. BREATHIN RATE SENSOR
 The same 3D-accelarometer is used here with a
sampling rate of 10Hz.
 Measures 60 breaths per minute
Fig4:Smoothed and unsmoothed data acquired from the 3D-accelarometer

9. STRATERGY TO MEASURE
BREATHING RATE
 Implementation of the smoothing algorithm
results in huge energy consumption
 State machine with three possible states are used
to minimize the power consumption
 Middle state
 High state
 Low state

10. RESULT OF BREATHING RATE
SENSOR
Fig 5:Axis’s values while infant is lying on his
back
Fig 5:Axis’s values while infant is lying on his
back

11.  Infrared thermopile sensor-TMP007
 Measure without any contact with the skin
 Provides digital interface(I2C/SMBus)
 Thermally isolated from PCB
BODY TEMPERATURE
Temperature Sensor

12. GATEWAY
 Beagle Bone Black, with a Debian Wheezy image is
installed
 Network service was provided by lighted server with
PHP5.1
 Serial port communication protocol was used for
communication
 TL-WN725N is used to connect gateway to router
Fig 7:Gateway :shield placement on the Beagle Bone
Board

13. H Medical Web Interface
 Helps the user to retrieve the information from
SWS
 Developed in PHP,SQL,Javascript,HTML5,CSS3
 Worked on any device independent of OS
 Helps to
 Generate charts
 Time-lapse animation
 Export data to different type of files
 Allows to add new users
 Monitor multiple infants

14. Results obtained after evaluation
 Heart rate sensor
Fig 8:H Medical Web Interface

15. Fig. 9. ECG signal output before (blue) and after filtration and
amplification (red).
Fig. 11. Breathing waveform during position's changes