The measurement of uric acid based on the optical absorption at visible light spectrum is investigated and tested. Sensing in the visible region was conducted for determination of suitable wavelength that produces high sensitivity and accuracy performance based on the Beer-Lambert law calculation. In this work, the uric acid is detected by detecting sodium urate as a product of chemical reaction between uric acid with sodium hydroxide buffer. The setup has been tested for uric acid concentration ranging from 15 mg/dL to 85 mg/dL. Three wavelengths have been analyzed which are 460 nm, 525 nm and 630 nm. Measured data at 460nm wavelength exhibits the highest sensitivity, which is 0.0012 (mg/dL)-with 86.51% accuracy. Detection of uric acid at visible light spectrum offers a low-cost sensor based on visible LEDs and photodiode is possible to be realized.
Multiple Federal and State Agencies (e.g. EPA, DOD, DEQs and DEPs) in the United States as well as international organizations (e.g. ASTM) are quickly publishing new analytical methodologies for PFAS monitoring and establishing more stringent limits. Liquid Chromatography with Mass Spectrometry-based detection is established as the most suitable technology for meeting the requirements from official methods released up to date for monitoring PFAS. A comparison of instruments’ performance was conducted in this work.
Noninvasive blood glucose monitoring system based on near-infrared method IJECEIAES
Diabetes is considered one of the life-threatening diseases in the world which need continuous monitoring to avoid the complication of diabetes. There is a need to develop a non-invasive monitoring system that avoids the risk of infection problems and pain caused by invasive monitoring techniques. This paper presents a method for developing a noninvasive technique to predict the blood glucose concentration (BCG) based on the Near-infrared (NIR) light sensor. A prototype is developed using a finger sensor based on LED of 940 nm wavelength to collect photoplethysmography (PPG) signal which is variable depending on the glucose concentration variance, a module circuit to preprocess PPG signals is realized, which includes an amplifier and analog filter circuits, an Arduino UNO is used to analog-to-digital conversion. A digital Butterworth filterer is used to remove PPG signal trends, then detect the PPG data peaks to determine the relationship between the PPG signal and (BCG) and use it as input parameters to build the calibration model based on linear regression. Experiments show that the Root Mean Squares Error (RMSE) of the prediction is between 8.264mg/dL and 13.166 mg/dL, the average of RMSE is about 10.44mg/dL with a correlation coefficient (R^2) of 0.839, it is observed that the prediction of glucose concentration is in the clinically acceptable region of the standard Clark Error Grid (CEG).
The measurement of uric acid based on the optical absorption at visible light spectrum is investigated and tested. Sensing in the visible region was conducted for determination of suitable wavelength that produces high sensitivity and accuracy performance based on the Beer-Lambert law calculation. In this work, the uric acid is detected by detecting sodium urate as a product of chemical reaction between uric acid with sodium hydroxide buffer. The setup has been tested for uric acid concentration ranging from 15 mg/dL to 85 mg/dL. Three wavelengths have been analyzed which are 460 nm, 525 nm and 630 nm. Measured data at 460nm wavelength exhibits the highest sensitivity, which is 0.0012 (mg/dL)-with 86.51% accuracy. Detection of uric acid at visible light spectrum offers a low-cost sensor based on visible LEDs and photodiode is possible to be realized.
Multiple Federal and State Agencies (e.g. EPA, DOD, DEQs and DEPs) in the United States as well as international organizations (e.g. ASTM) are quickly publishing new analytical methodologies for PFAS monitoring and establishing more stringent limits. Liquid Chromatography with Mass Spectrometry-based detection is established as the most suitable technology for meeting the requirements from official methods released up to date for monitoring PFAS. A comparison of instruments’ performance was conducted in this work.
Noninvasive blood glucose monitoring system based on near-infrared method IJECEIAES
Diabetes is considered one of the life-threatening diseases in the world which need continuous monitoring to avoid the complication of diabetes. There is a need to develop a non-invasive monitoring system that avoids the risk of infection problems and pain caused by invasive monitoring techniques. This paper presents a method for developing a noninvasive technique to predict the blood glucose concentration (BCG) based on the Near-infrared (NIR) light sensor. A prototype is developed using a finger sensor based on LED of 940 nm wavelength to collect photoplethysmography (PPG) signal which is variable depending on the glucose concentration variance, a module circuit to preprocess PPG signals is realized, which includes an amplifier and analog filter circuits, an Arduino UNO is used to analog-to-digital conversion. A digital Butterworth filterer is used to remove PPG signal trends, then detect the PPG data peaks to determine the relationship between the PPG signal and (BCG) and use it as input parameters to build the calibration model based on linear regression. Experiments show that the Root Mean Squares Error (RMSE) of the prediction is between 8.264mg/dL and 13.166 mg/dL, the average of RMSE is about 10.44mg/dL with a correlation coefficient (R^2) of 0.839, it is observed that the prediction of glucose concentration is in the clinically acceptable region of the standard Clark Error Grid (CEG).
A prospective study was conducted at a critical care department and post-anesthesia care unit of a university teaching hospital in Barcelona, Spain. The study recruited 707 patients with invasive BP and finger PPG waves over a period of 26 months. Exclusion criteria were presence of major arrhythmia, immediate death condition and disturbances in the arterial or PPG curve morphology. For each patient we automatically recorded the systolic blood pressure (SBP), mean arterial pressure (MAP), diastolic blood pressure (DBP) and PPG curve for 30 minutes. The PPG signal was further processed to obtain a set of features that were used to construct a Deep Belief Network with Gaussian Restricted Boltzmann Machine (DBN-RBM). The available dataset was split into three subsets (Training, Validation and Testing). The training and validation datasets included 85% of data and the testing dataset included 15% of the available data. The regression error was assessed through a Bland-Altman analysis and the AAMI standard. The mean prediction error were -2.98+-19.35 mmHg for SBP, -3.38+-10.35 mmHg for MAP and 3.65+-8.69 mmHg for DBP.
The results obtained are promising for the assessment of MAP and DBP with DBN-RBM. Further research and clinical validation are needed to bring this technology to standard medical practice.
Icbme2020- Use of neural network algorithms to predict arterial blood gas ite...Mohammad Sabouri
Use of neural network algorithms to predict arterial blood gas items in trauma victims
Milad Shayan
Mohammad Sabouri
Dr. Shahram Paydar
Leila Shayan
ACRRL
Applied Control & Robotics Research Laboratory of Shiraz University
Department of Power and Control Engineering, Shiraz University, Fars, Iran.
27th National and 5th International Conference of Biomedical Engineering
https://sites.google.com/view/acrrl/
http://icbme.ir/
Biosensors And Bioelectronics Presentation by Sijung HuConferenceMind
Excellent presentation by Sijung Hu, Loughborough University, United Kingdom. He talks about - "Opto-physiological modeling to drive an effective physiological monitoring: from contact to noncontact, from point to imaging" at the 2nd International Webinar on Biosensors And Bioelectronics
Date: July 12-13, 2021
Visit here for more details:
https://conferencemind.com/conference/biosensorsandbioelectronics
Follow us:-
https://www.facebook.com/Conference-Mind-103557674347276/
https://twitter.com/ConferenceMind
https://www.instagram.com/conferencemind/
https://www.linkedin.com/company/conferencemind-conferences/
https://www.youtube.com/channel/UC2KH-I3EBpPSMkJEZQKIU0A
https://in.pinterest.com/academic0532/_created/
https://www.flickr.com/photos/190611570@N06/
Development and Validation of a Combined Photoacoustic Micro-Ultrasound Syste...FUJIFILM VisualSonics Inc.
Photoacoustic (PA) Imaging can estimate the spatial distribution of oxygen saturation (sO2) and total hemoglobin concentration (HbT) in blood, and be co-registered with B-Mode ultrasound images of the surrounding anatomy. This study will focus on the development of a PA imaging mode on a commercially available array based micro-ultrasound (μUS) system that is capable of creating such images.
Development and Validation of RP HPLC Method for Estimation of Vortioxetine i...ijtsrd
A rapid and precise reverse phase high performance liquid chromatographic method has been developed for the validated of Vortioxetine in its pure form as well as in tablet dosage form. Chromatography was carried out on ODS C18 4.6 x 250 mm, 5µm column using Acetonitrile And Methonal 70 30 as the mobile phase at a flow rate of 1.0 mL min, the detection was carried out at 274nm. The retention time of the Vortioxetine was 2.922 ±0.02min. The method produce linear responses in the concentration range of 20 µg ml of Vortioxetine. The method precision for the determination of assay was below 2.0 RSD. The method is useful in the quality control of bulk and pharmaceutical formulations. Rathod K. G | Bargaje G. S | Rathod G. R | Deshpande O. V "Development and Validation of RP-HPLC Method for Estimation of Vortioxetine in Bulk and Pharmaceutical Dosage Form" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-6 , October 2019, URL: https://www.ijtsrd.com/papers/ijtsrd28040.pdf Paper URL: https://www.ijtsrd.com/pharmacy/analytical-chemistry/28040/development-and-validation-of-rp-hplc-method-for-estimation-of-vortioxetine-in-bulk-and-pharmaceutical-dosage-form/rathod-k-g
A novel approach in identification of blood group using laser technologyeSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Design of the Pulse Oximetry Measurement Circuit and Its Sensing System Based...IOSRJEEE
The pulse oximetry circuit and its sensing system is designed based on the standard CMOS technology of 0.18um. The reflection oxygen sensor is used to collect the pulse oximeter signal of human body, then the collected physiological signals are processed by the data processing circuit The data processing circuit is composed of two parts: the amplifying circuit and the band-pass filter circuit, and the pulse oximeter data processed by the data processing circuit is written into the tag through the SPI communication The RFID reader read the data in the RFID tag through wireless communication, and display the data . The experimental results show that the maximum error is ±1%. The maximum error of the pulse is ±1.9%. The stability and feasibility of pulse blood oxygen sensing system is demonstrated in this paper and it will have a good application prospect in the direction of wearable medical wisdom research
Comparison of reticulocyte count by VCS technology; Beckman Coulter Hematolog...kridsada31
Kridsada Sirisabhabhorn1 Anurak Choeymang2 Supaporn Pumpa1 Naiyana poottasane1 and Palakorn Puttaruk1
1Department of Medical Technology Laboratory, Thammasat University hospital, Pathumthani, Thailand
2Pharmacology and Toxicology Unit, Faculty of Allied Health Sciences, Thammasat University, Pathumthani, Thailand
A prospective study was conducted at a critical care department and post-anesthesia care unit of a university teaching hospital in Barcelona, Spain. The study recruited 707 patients with invasive BP and finger PPG waves over a period of 26 months. Exclusion criteria were presence of major arrhythmia, immediate death condition and disturbances in the arterial or PPG curve morphology. For each patient we automatically recorded the systolic blood pressure (SBP), mean arterial pressure (MAP), diastolic blood pressure (DBP) and PPG curve for 30 minutes. The PPG signal was further processed to obtain a set of features that were used to construct a Deep Belief Network with Gaussian Restricted Boltzmann Machine (DBN-RBM). The available dataset was split into three subsets (Training, Validation and Testing). The training and validation datasets included 85% of data and the testing dataset included 15% of the available data. The regression error was assessed through a Bland-Altman analysis and the AAMI standard. The mean prediction error were -2.98+-19.35 mmHg for SBP, -3.38+-10.35 mmHg for MAP and 3.65+-8.69 mmHg for DBP.
The results obtained are promising for the assessment of MAP and DBP with DBN-RBM. Further research and clinical validation are needed to bring this technology to standard medical practice.
Icbme2020- Use of neural network algorithms to predict arterial blood gas ite...Mohammad Sabouri
Use of neural network algorithms to predict arterial blood gas items in trauma victims
Milad Shayan
Mohammad Sabouri
Dr. Shahram Paydar
Leila Shayan
ACRRL
Applied Control & Robotics Research Laboratory of Shiraz University
Department of Power and Control Engineering, Shiraz University, Fars, Iran.
27th National and 5th International Conference of Biomedical Engineering
https://sites.google.com/view/acrrl/
http://icbme.ir/
Biosensors And Bioelectronics Presentation by Sijung HuConferenceMind
Excellent presentation by Sijung Hu, Loughborough University, United Kingdom. He talks about - "Opto-physiological modeling to drive an effective physiological monitoring: from contact to noncontact, from point to imaging" at the 2nd International Webinar on Biosensors And Bioelectronics
Date: July 12-13, 2021
Visit here for more details:
https://conferencemind.com/conference/biosensorsandbioelectronics
Follow us:-
https://www.facebook.com/Conference-Mind-103557674347276/
https://twitter.com/ConferenceMind
https://www.instagram.com/conferencemind/
https://www.linkedin.com/company/conferencemind-conferences/
https://www.youtube.com/channel/UC2KH-I3EBpPSMkJEZQKIU0A
https://in.pinterest.com/academic0532/_created/
https://www.flickr.com/photos/190611570@N06/
Development and Validation of a Combined Photoacoustic Micro-Ultrasound Syste...FUJIFILM VisualSonics Inc.
Photoacoustic (PA) Imaging can estimate the spatial distribution of oxygen saturation (sO2) and total hemoglobin concentration (HbT) in blood, and be co-registered with B-Mode ultrasound images of the surrounding anatomy. This study will focus on the development of a PA imaging mode on a commercially available array based micro-ultrasound (μUS) system that is capable of creating such images.
Development and Validation of RP HPLC Method for Estimation of Vortioxetine i...ijtsrd
A rapid and precise reverse phase high performance liquid chromatographic method has been developed for the validated of Vortioxetine in its pure form as well as in tablet dosage form. Chromatography was carried out on ODS C18 4.6 x 250 mm, 5µm column using Acetonitrile And Methonal 70 30 as the mobile phase at a flow rate of 1.0 mL min, the detection was carried out at 274nm. The retention time of the Vortioxetine was 2.922 ±0.02min. The method produce linear responses in the concentration range of 20 µg ml of Vortioxetine. The method precision for the determination of assay was below 2.0 RSD. The method is useful in the quality control of bulk and pharmaceutical formulations. Rathod K. G | Bargaje G. S | Rathod G. R | Deshpande O. V "Development and Validation of RP-HPLC Method for Estimation of Vortioxetine in Bulk and Pharmaceutical Dosage Form" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-6 , October 2019, URL: https://www.ijtsrd.com/papers/ijtsrd28040.pdf Paper URL: https://www.ijtsrd.com/pharmacy/analytical-chemistry/28040/development-and-validation-of-rp-hplc-method-for-estimation-of-vortioxetine-in-bulk-and-pharmaceutical-dosage-form/rathod-k-g
A novel approach in identification of blood group using laser technologyeSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Design of the Pulse Oximetry Measurement Circuit and Its Sensing System Based...IOSRJEEE
The pulse oximetry circuit and its sensing system is designed based on the standard CMOS technology of 0.18um. The reflection oxygen sensor is used to collect the pulse oximeter signal of human body, then the collected physiological signals are processed by the data processing circuit The data processing circuit is composed of two parts: the amplifying circuit and the band-pass filter circuit, and the pulse oximeter data processed by the data processing circuit is written into the tag through the SPI communication The RFID reader read the data in the RFID tag through wireless communication, and display the data . The experimental results show that the maximum error is ±1%. The maximum error of the pulse is ±1.9%. The stability and feasibility of pulse blood oxygen sensing system is demonstrated in this paper and it will have a good application prospect in the direction of wearable medical wisdom research
Comparison of reticulocyte count by VCS technology; Beckman Coulter Hematolog...kridsada31
Kridsada Sirisabhabhorn1 Anurak Choeymang2 Supaporn Pumpa1 Naiyana poottasane1 and Palakorn Puttaruk1
1Department of Medical Technology Laboratory, Thammasat University hospital, Pathumthani, Thailand
2Pharmacology and Toxicology Unit, Faculty of Allied Health Sciences, Thammasat University, Pathumthani, Thailand
On The Detection of Ctni - A Comparison of Surface-Plasmon Optical - Electroc...komalicarol
“Cardiovascular diseases (CVDs) are the number one cause of
death globally, taking an estimated 17.9 million lives each year.
CVDs are a group of disorders of the heart and blood vessels and
include coronary heart disease, cerebrovascular disease, rheumatic
heart disease, and other conditions
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
When stars align: studies in data quality, knowledge graphs, and machine lear...
A New Analytical Calibration Method For Measuring A Wide Range Of Oxygen Saturation Using Photoplethysmography Ama
1. 1 Key Laboratory of Biomedical information and Health Engineering, Chinese Academy of Sciences, China Institute of Biomedical and Health Engineering, Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, China 2 Joint Research Center for Biomedical Engineering, The Chinese University of Hong Kong, Shatin, N.T., Hong Kong A NEW ANALYTICAL CALIBRATION METHOD FOR MEASURING A WIDE RANGE OF OXYGEN SATURATION USING PHOTOPLETHYSMOGRAPHY Li-na Pu 1 Wan-hua Lin 1 Carmen C. Y. Poon 2 Yuan-ting Zhang 1 2 , Fellow, IEEE www.siat.ac.cn Email: ytzhang@ee.cuhk.edu.hk
![INTRODUCTION ,[object Object],[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)