This document describes a powder dispensing device that can be attached to a powder container like a detergent carton. The dispensing device has an inlet and outlet aperture and an internal zig-zag passageway. Powder passes through the passageway from the inlet to the outlet each time the container is tipped, dispensing a uniform amount of powder. The device is made of a material like cardboard and can be constructed from a single blank that is folded into shape.
This document describes an improvement to closures for openings, particularly windows of the sash type. It details a closure using first and second panels that are slidably mounted in guides. The guides can pivotally move the panels into a closed position where the panels are flush. This provides a flat, uninterrupted surface when closed. When open, the panels can slide in their guides in a plane parallel to the other panel. The document then provides figures and descriptions of examples using this design for windows.
This document summarizes a patent for improvements in the manufacture of viscose. Specifically, it describes an apparatus that uses a rotating perforated plate and roller to break up lumps of cellulose xanthate in a slurry with caustic soda solution. The lumps are deposited on the plate and squeezed through the perforations by the roller to more finely divide the cellulose xanthate. This facilitates faster dissolution and yields viscose free of lumps. Diagrams of the apparatus are provided showing its components and operation.
This document describes improvements to measuring instruments and gauges patented by Marconi's Wireless Telegraph Company in 1957. It details an instrument that uses at least one semiconductor photojunction to measure the thickness of a specimen by projecting a light pattern and measuring changes in current flow through the junction as the distance between the light and junction interface is varied by the thickness of the inserted specimen. The instrument allows for very precise thickness measurements and has applications in measuring wafers and sheets.
This document describes a patent for an improved rear rifle sight. The sight has adjustable scales to show the position of the sighting aperture. The scales can be moved independently of the adjusting mechanism and locked into the zero position after the sight has been calibrated to the rifle. This allows the rifleman to accurately set the zero without having to mentally account for the offset introduced during calibration.
This patent document describes improvements to roll-film photographic cameras that allow for double exposures. Specifically, it describes a camera with a rotatable operating member that can selectively couple or uncouple the shutter winding and film transport mechanisms. It also includes a locking device that prevents movement of the shutter winding mechanism when the film transport mechanism is uncoupled after an incomplete film feed, addressing limitations of the prior design.
This document provides details of an injection molding machine, including:
- The machine uses tie rods to connect fixed and movable mold plates, with hydraulic cylinders to move the plates and inject material.
- It has a movable platen that supports a mold piece, and hydraulic pistons to move the platen towards a fixed platen holding the other mold piece.
- Additional hydraulic systems apply very high pressure to the movable platen for the final closing of the molds.
This document describes a 1957 patent for a metal piston with an applied porous organic material layer. The layer, which can be wood or synthetic resin-impregnated materials and is less than 2mm thick, addresses the disadvantage of other organic piston materials which have high expansion coefficients compared to metals. The layer allows for smooth running of the piston without the need for abundant lubrication, preventing contamination of working gases in applications like gas compressors and hot-gas engines. An example refrigerator piston is described with a 0.5mm wood layer applied to its displacer body, leaving a narrow gap for operation without piston rings.
This document describes a filtering liner that can be placed in the barrel of an extrusion machine. The liner has longitudinal grooves on its outer surface connected to its interior by holes. It filters out large plastic lumps and increases friction to further melt the plastic as it is forced through the small holes and along the grooves. The liner extends over at least one-third the distance between the die and furthest point of the screw or ram and helps efficiently heat and filter the plastic material before it exits through the die.
This document describes an improvement to closures for openings, particularly windows of the sash type. It details a closure using first and second panels that are slidably mounted in guides. The guides can pivotally move the panels into a closed position where the panels are flush. This provides a flat, uninterrupted surface when closed. When open, the panels can slide in their guides in a plane parallel to the other panel. The document then provides figures and descriptions of examples using this design for windows.
This document summarizes a patent for improvements in the manufacture of viscose. Specifically, it describes an apparatus that uses a rotating perforated plate and roller to break up lumps of cellulose xanthate in a slurry with caustic soda solution. The lumps are deposited on the plate and squeezed through the perforations by the roller to more finely divide the cellulose xanthate. This facilitates faster dissolution and yields viscose free of lumps. Diagrams of the apparatus are provided showing its components and operation.
This document describes improvements to measuring instruments and gauges patented by Marconi's Wireless Telegraph Company in 1957. It details an instrument that uses at least one semiconductor photojunction to measure the thickness of a specimen by projecting a light pattern and measuring changes in current flow through the junction as the distance between the light and junction interface is varied by the thickness of the inserted specimen. The instrument allows for very precise thickness measurements and has applications in measuring wafers and sheets.
This document describes a patent for an improved rear rifle sight. The sight has adjustable scales to show the position of the sighting aperture. The scales can be moved independently of the adjusting mechanism and locked into the zero position after the sight has been calibrated to the rifle. This allows the rifleman to accurately set the zero without having to mentally account for the offset introduced during calibration.
This patent document describes improvements to roll-film photographic cameras that allow for double exposures. Specifically, it describes a camera with a rotatable operating member that can selectively couple or uncouple the shutter winding and film transport mechanisms. It also includes a locking device that prevents movement of the shutter winding mechanism when the film transport mechanism is uncoupled after an incomplete film feed, addressing limitations of the prior design.
This document provides details of an injection molding machine, including:
- The machine uses tie rods to connect fixed and movable mold plates, with hydraulic cylinders to move the plates and inject material.
- It has a movable platen that supports a mold piece, and hydraulic pistons to move the platen towards a fixed platen holding the other mold piece.
- Additional hydraulic systems apply very high pressure to the movable platen for the final closing of the molds.
This document describes a 1957 patent for a metal piston with an applied porous organic material layer. The layer, which can be wood or synthetic resin-impregnated materials and is less than 2mm thick, addresses the disadvantage of other organic piston materials which have high expansion coefficients compared to metals. The layer allows for smooth running of the piston without the need for abundant lubrication, preventing contamination of working gases in applications like gas compressors and hot-gas engines. An example refrigerator piston is described with a 0.5mm wood layer applied to its displacer body, leaving a narrow gap for operation without piston rings.
This document describes a filtering liner that can be placed in the barrel of an extrusion machine. The liner has longitudinal grooves on its outer surface connected to its interior by holes. It filters out large plastic lumps and increases friction to further melt the plastic as it is forced through the small holes and along the grooves. The liner extends over at least one-third the distance between the die and furthest point of the screw or ram and helps efficiently heat and filter the plastic material before it exits through the die.
1) The document describes a method for protecting fire extinguishers from corrosion by applying a coating to the interior of the extinguisher body.
2) The coating is produced by mixing equal parts of distilled bitumen and air blown bitumen, heating the mixture, and applying it to the pre-heated interior walls of the extinguisher body.
3) The bitumen coating provides a durable, waterproof layer that prevents corrosion even if the metal body is bent, and remains effective over prolonged use.
1. This document describes a 1957 British patent for a two-way radio link between a guided object like a missile and a guiding source like an aircraft.
2. The radio link uses a single carrier frequency and allows transmission of guidance signals from the missile to the aircraft and control signals from the aircraft to the missile by switching between transmission and reception during intervals in the guidance signals.
3. Synchronization signals embedded in the guidance signals are used to control switches that alternate the radio link between transmitting the guidance signals and receiving the control signals.
1. The document describes a 1957 British patent for improvements to refrigerators relating to maintaining humidity in the food storage compartment.
2. It discloses a receptacle containing a water supply and heating element located in the food storage compartment to evaporate water and increase humidity.
3. The receptacle is periodically refilled using water from defrosting of the cooling unit, with various arrangements described for controlling the heating element to maintain a satisfactory degree of humidity.
This document provides a patent specification from 1957 for improvements relating to the inversion of television signals. Specifically, it describes a circuit using a variable-mu pentode that can derive a positive signal from a negative motion picture film, or vice versa. The circuit takes advantage of the non-linear characteristics of a variable-mu pentode to approximate the negative power law required to correctly invert the signals in a way that produces acceptable pictures without compression artifacts.
This document describes British patent GB780011 (A) for improvements to water softening devices. Specifically, it describes a water softening device that uses a cation exchange process and incorporates a cartridge containing the softening medium. The cartridge is detachably mounted to a frame-like structure that can be fixed to a wall. The device is designed to be lower cost than previous water softening equipment in order to be used in conjunction with water heaters.
The document describes a process and apparatus for photographically recording televised images from a cathode ray tube onto unexposed motion picture film. It discusses using intermittent motion of the film rather than continuous motion to allow longer exposure periods that can capture the afterglow of the fluorescent screen. It also describes using a system to divert, delay, and reproduce selected images to provide time for film shifting between exposures while ensuring the whole television image is recorded on the film.
This document describes a patent for improvements to food mixers. It discloses a mixer with an elongated spinner shaft that carries a spinner on one end and connects detachably to the power take-off of the mixer on the other end. A stationary guide receives and steadies the spinner shaft near the spinner to prevent whipping. The spinner shaft connects to the power take-off shaft through a longitudinally movable connector urged away by a spring to form a combined journal and thrust bearing and running seal.
This patent document describes improvements to shaft bearings that provide lubrication regardless of motor position or rotation direction. The bearing features a journal sleeve and thrust members, with annular wicks that absorb lubricant and preload the thrust surfaces to prevent noise. Helical grooves in the shaft pump lubricant between the wicks to lubricate the journal and thrust surfaces, with means to return excess lubricant to ensure adequate supply in any conditions.
This document is a patent application for an improved air or gas cooler. The cooler has tubes through which cooling water flows and over which compressed air or gas flows. Traditionally, secondary heat conducting surfaces like fins or discs along the full length of the tubes could accumulate oil or other contaminants near the inlet, requiring troublesome cleaning. The improved cooler has secondary surfaces only on the portion of each tube between the inlet baffle and outlet end, reducing accumulation in hard to clean areas near the inlet. The cooler uses baffles to direct airflow in a zigzag pattern over the finned tube sections for efficient cooling before the air exits through the outlet.
The document describes a method for producing edible food products from peanuts. The key steps involve cleaning peanut kernels to remove skins and foreign matter, pressing the kernels using an expeller process to extract oil while avoiding excessive heating, grinding the resulting cake into a fine powder, and roasting the powder to reagglomerate it into granules and improve flavor. Nutrients can be added to produce a balanced food product.
This document describes a starting switch for internal combustion engines comprising electrical contacts in a housing and a rotor mounted in the housing. The rotor is operatively connected to an actuating shaft to close the contacts. A suction responsive ball is adapted to move to an effective position by engine suction to block rotation of the rotor and prevent closing of the contacts after the engine starts. The starting switch utilizes a spherical suction responsive member and provides initial positive actuation of the member to keep it from sticking, making the switch self-cleaning and unaffected by dirt or impurities.
This document describes a device for rapidly braking two-stroke internal combustion engines that can operate in reversible directions. The device uses two contact breakers associated with different rotational directions. When the ignition switch is changed to the opposite direction, one contact breaker will open shortly before top dead center to provide an ignition spark, braking the engine. This allows the starting motor to be reversed without heavy loading before the engine fully stops.
This document describes improvements to machines for broadcasting seed, fertilizer, and other granular materials. It summarizes a patent for a machine that allows variable control over the spread, direction, and rate of material distribution. The key improvements include an adjustable outlet from the hopper that can change the arc of distribution and direct it radially. Adjusting the length of the outlet also varies the spread of the arc or keeps it constant for different materials.
This document describes improvements to machines for broadcasting seeds, fertilizers, and other granular materials. It includes means to vary the distribution of materials in three ways: 1) by adjusting an outlet from the hopper to confine distribution to an arc and vary its spread, 2) by adjusting the outlet angularly to vary the direction of the arc, and 3) by adjusting a masking plate to vary the length of the outlet arc and thereby control the rate of distribution. These adjustments allow for variations in materials and machine operating conditions.
This document describes a patent for an atomizing or spray container with a flexible side wall. It contains a tube inside the container with an adjustable air intake orifice. When the side walls are squeezed, both air and liquid are forced up the tube where they mix and are ejected through a spray outlet. The tube can be adjusted to control the mixture and produce different types of sprays. Various embodiments are illustrated with different configurations for the tube and adjusting the air orifice.
This document describes a patent for an atomizing or spray container with a flexible side wall. It contains a tube with an adjustable air intake orifice that allows air to mix with liquid inside the tube and be ejected through a spray outlet. Adjusting the air orifice controls whether a coarse spray, fine spray or liquid jet is produced. The tube can be installed in a cap or stopper closure in various adjustable or fixed configurations to allow for directional spraying and easy removal of the tube.
This document summarizes a patent for an improved case with a hinged lid that is held closed by a spring-loaded retainer. The retainer is supported in front of the case and has a top portion that protrudes through a slot in the case wall to be depressed by a finger. This allows the lid to be opened while providing an efficient closure in a neat design. The case is intended to hold items like ink pads, cigarettes, or pins and can be made of plastic through a molding process. Diagrams show features of the hinged lid, retainer, and supports that maintain the retainer in the closed position.
This document summarizes a patent for an improved case with a hinged lid that is held closed by a spring-loaded retainer. The retainer is supported in front of the case and has a top portion that protrudes through a slot in the case wall to be depressed by a finger. This allows the lid to be opened while providing an efficient closure in a neat design. The case is intended to hold items like ink pads, cigarettes, or pins and is made of plastic or other materials in a one-piece moulding.
This document describes improvements to packaging containers made of thermoplastic sheet material. Specifically, it details a container with a body and lid that have cooperating fastening means on their flanges to releasably secure the lid to the body. The body flange has one or more pockets whose width increases downward, while the lid flange has complementary projections that fit into the pockets. This allows the lid to be easily replaced on the body after opening without needing to reweld the parts together. Methods for manufacturing these containers using molds are also described.
The document describes a patent for improvements in the production of molds and cores. It involves a process of blowing a mixture of sand and gas-hardenable binder into a mold or core box while applying a gaseous hardening agent. Specifically, it applies the hardening agent at points where the air pressure pushing the mixture has reduced, so that the gas is prevented from flowing backwards. This allows the gas to harden the mixture inside the mold box without hardening leftover mixture in the container.
This document describes a patent for improvements in the production of molds and cores. Specifically, it involves a process where a mixture of sand and gas-hardenable binder is blown into a mold or core box. A gaseous hardening agent is then applied to the mixture as it enters the mold box. This allows the molds and cores to be formed and hardened rapidly. The document provides detailed descriptions of the process and apparatus used, including the use of a venturi tube-shaped orifice in the blowing plate to control where the hardening agent is introduced.
The document describes a patent for improvements in the production of molds and cores. It involves a process of blowing a mixture of sand and gas-hardenable binder into a mold or core box while applying a gaseous hardening agent. Specifically, it applies the hardening agent at points where the air pressure driving the mixture has reduced, so that the gas is prevented from flowing backwards. The invention also provides an apparatus for this process using a blowing plate with vents to introduce the hardening gas into the mixture stream.
1) The document describes a method for protecting fire extinguishers from corrosion by applying a coating to the interior of the extinguisher body.
2) The coating is produced by mixing equal parts of distilled bitumen and air blown bitumen, heating the mixture, and applying it to the pre-heated interior walls of the extinguisher body.
3) The bitumen coating provides a durable, waterproof layer that prevents corrosion even if the metal body is bent, and remains effective over prolonged use.
1. This document describes a 1957 British patent for a two-way radio link between a guided object like a missile and a guiding source like an aircraft.
2. The radio link uses a single carrier frequency and allows transmission of guidance signals from the missile to the aircraft and control signals from the aircraft to the missile by switching between transmission and reception during intervals in the guidance signals.
3. Synchronization signals embedded in the guidance signals are used to control switches that alternate the radio link between transmitting the guidance signals and receiving the control signals.
1. The document describes a 1957 British patent for improvements to refrigerators relating to maintaining humidity in the food storage compartment.
2. It discloses a receptacle containing a water supply and heating element located in the food storage compartment to evaporate water and increase humidity.
3. The receptacle is periodically refilled using water from defrosting of the cooling unit, with various arrangements described for controlling the heating element to maintain a satisfactory degree of humidity.
This document provides a patent specification from 1957 for improvements relating to the inversion of television signals. Specifically, it describes a circuit using a variable-mu pentode that can derive a positive signal from a negative motion picture film, or vice versa. The circuit takes advantage of the non-linear characteristics of a variable-mu pentode to approximate the negative power law required to correctly invert the signals in a way that produces acceptable pictures without compression artifacts.
This document describes British patent GB780011 (A) for improvements to water softening devices. Specifically, it describes a water softening device that uses a cation exchange process and incorporates a cartridge containing the softening medium. The cartridge is detachably mounted to a frame-like structure that can be fixed to a wall. The device is designed to be lower cost than previous water softening equipment in order to be used in conjunction with water heaters.
The document describes a process and apparatus for photographically recording televised images from a cathode ray tube onto unexposed motion picture film. It discusses using intermittent motion of the film rather than continuous motion to allow longer exposure periods that can capture the afterglow of the fluorescent screen. It also describes using a system to divert, delay, and reproduce selected images to provide time for film shifting between exposures while ensuring the whole television image is recorded on the film.
This document describes a patent for improvements to food mixers. It discloses a mixer with an elongated spinner shaft that carries a spinner on one end and connects detachably to the power take-off of the mixer on the other end. A stationary guide receives and steadies the spinner shaft near the spinner to prevent whipping. The spinner shaft connects to the power take-off shaft through a longitudinally movable connector urged away by a spring to form a combined journal and thrust bearing and running seal.
This patent document describes improvements to shaft bearings that provide lubrication regardless of motor position or rotation direction. The bearing features a journal sleeve and thrust members, with annular wicks that absorb lubricant and preload the thrust surfaces to prevent noise. Helical grooves in the shaft pump lubricant between the wicks to lubricate the journal and thrust surfaces, with means to return excess lubricant to ensure adequate supply in any conditions.
This document is a patent application for an improved air or gas cooler. The cooler has tubes through which cooling water flows and over which compressed air or gas flows. Traditionally, secondary heat conducting surfaces like fins or discs along the full length of the tubes could accumulate oil or other contaminants near the inlet, requiring troublesome cleaning. The improved cooler has secondary surfaces only on the portion of each tube between the inlet baffle and outlet end, reducing accumulation in hard to clean areas near the inlet. The cooler uses baffles to direct airflow in a zigzag pattern over the finned tube sections for efficient cooling before the air exits through the outlet.
The document describes a method for producing edible food products from peanuts. The key steps involve cleaning peanut kernels to remove skins and foreign matter, pressing the kernels using an expeller process to extract oil while avoiding excessive heating, grinding the resulting cake into a fine powder, and roasting the powder to reagglomerate it into granules and improve flavor. Nutrients can be added to produce a balanced food product.
This document describes a starting switch for internal combustion engines comprising electrical contacts in a housing and a rotor mounted in the housing. The rotor is operatively connected to an actuating shaft to close the contacts. A suction responsive ball is adapted to move to an effective position by engine suction to block rotation of the rotor and prevent closing of the contacts after the engine starts. The starting switch utilizes a spherical suction responsive member and provides initial positive actuation of the member to keep it from sticking, making the switch self-cleaning and unaffected by dirt or impurities.
This document describes a device for rapidly braking two-stroke internal combustion engines that can operate in reversible directions. The device uses two contact breakers associated with different rotational directions. When the ignition switch is changed to the opposite direction, one contact breaker will open shortly before top dead center to provide an ignition spark, braking the engine. This allows the starting motor to be reversed without heavy loading before the engine fully stops.
This document describes improvements to machines for broadcasting seed, fertilizer, and other granular materials. It summarizes a patent for a machine that allows variable control over the spread, direction, and rate of material distribution. The key improvements include an adjustable outlet from the hopper that can change the arc of distribution and direct it radially. Adjusting the length of the outlet also varies the spread of the arc or keeps it constant for different materials.
This document describes improvements to machines for broadcasting seeds, fertilizers, and other granular materials. It includes means to vary the distribution of materials in three ways: 1) by adjusting an outlet from the hopper to confine distribution to an arc and vary its spread, 2) by adjusting the outlet angularly to vary the direction of the arc, and 3) by adjusting a masking plate to vary the length of the outlet arc and thereby control the rate of distribution. These adjustments allow for variations in materials and machine operating conditions.
This document describes a patent for an atomizing or spray container with a flexible side wall. It contains a tube inside the container with an adjustable air intake orifice. When the side walls are squeezed, both air and liquid are forced up the tube where they mix and are ejected through a spray outlet. The tube can be adjusted to control the mixture and produce different types of sprays. Various embodiments are illustrated with different configurations for the tube and adjusting the air orifice.
This document describes a patent for an atomizing or spray container with a flexible side wall. It contains a tube with an adjustable air intake orifice that allows air to mix with liquid inside the tube and be ejected through a spray outlet. Adjusting the air orifice controls whether a coarse spray, fine spray or liquid jet is produced. The tube can be installed in a cap or stopper closure in various adjustable or fixed configurations to allow for directional spraying and easy removal of the tube.
This document summarizes a patent for an improved case with a hinged lid that is held closed by a spring-loaded retainer. The retainer is supported in front of the case and has a top portion that protrudes through a slot in the case wall to be depressed by a finger. This allows the lid to be opened while providing an efficient closure in a neat design. The case is intended to hold items like ink pads, cigarettes, or pins and can be made of plastic through a molding process. Diagrams show features of the hinged lid, retainer, and supports that maintain the retainer in the closed position.
This document summarizes a patent for an improved case with a hinged lid that is held closed by a spring-loaded retainer. The retainer is supported in front of the case and has a top portion that protrudes through a slot in the case wall to be depressed by a finger. This allows the lid to be opened while providing an efficient closure in a neat design. The case is intended to hold items like ink pads, cigarettes, or pins and is made of plastic or other materials in a one-piece moulding.
This document describes improvements to packaging containers made of thermoplastic sheet material. Specifically, it details a container with a body and lid that have cooperating fastening means on their flanges to releasably secure the lid to the body. The body flange has one or more pockets whose width increases downward, while the lid flange has complementary projections that fit into the pockets. This allows the lid to be easily replaced on the body after opening without needing to reweld the parts together. Methods for manufacturing these containers using molds are also described.
The document describes a patent for improvements in the production of molds and cores. It involves a process of blowing a mixture of sand and gas-hardenable binder into a mold or core box while applying a gaseous hardening agent. Specifically, it applies the hardening agent at points where the air pressure pushing the mixture has reduced, so that the gas is prevented from flowing backwards. This allows the gas to harden the mixture inside the mold box without hardening leftover mixture in the container.
This document describes a patent for improvements in the production of molds and cores. Specifically, it involves a process where a mixture of sand and gas-hardenable binder is blown into a mold or core box. A gaseous hardening agent is then applied to the mixture as it enters the mold box. This allows the molds and cores to be formed and hardened rapidly. The document provides detailed descriptions of the process and apparatus used, including the use of a venturi tube-shaped orifice in the blowing plate to control where the hardening agent is introduced.
The document describes a patent for improvements in the production of molds and cores. It involves a process of blowing a mixture of sand and gas-hardenable binder into a mold or core box while applying a gaseous hardening agent. Specifically, it applies the hardening agent at points where the air pressure driving the mixture has reduced, so that the gas is prevented from flowing backwards. The invention also provides an apparatus for this process using a blowing plate with vents to introduce the hardening gas into the mixture stream.
The document describes a filtering liner that can be placed in the barrel of an extrusion machine. The liner has longitudinal grooves on the outside with holes connecting the inside of the liner to the grooves. As plastic flows through the liner, it is filtered and friction is increased, aiding in melting. Experiments showed using the liner improved plastic properties and machine operation compared to not using the liner.
This document describes a press member for garment pressing machines. It consists of gritty particles secured to a rigid backing member. The gritty particles are resistant to crushing, heat and moisture and have sharp edges. This creates an irregularly roughened pressing surface that eliminates wrinkles and creates sharp creases without imparting shine or moire patterns to fabrics. The gritty particles form a layer between the fabric and backing member to prevent any patterns on the backing from being transferred.
This document describes a press member for garment pressing machines. It consists of gritty particles secured to a rigid backing member. The gritty particles are resistant to crushing, heat and moisture and have sharp edges. This creates an irregularly roughened pressing surface that eliminates wrinkles and creates sharp creases without imparting shine or moire patterns to fabrics. The gritty particles form a layer between the fabric and backing member to prevent any patterns on the backing from being transferred.
This document describes GB780083 (A), a British patent from 1957 for an improved ornamental or display device. The device consists of a supporting plate with one or more removable vases that can be connected to the plate using press studs. The vases can be different shapes and colors and can hold either real or artificial flowers to allow the appearance of the device to be changed as desired.
This document describes GB780083 (A), a British patent from 1957 for an improved ornamental or display device. The device consists of a supporting plate with one or more removable vases that can be connected to the plate using press studs. The vases can be different shapes and colors and can hold either real or artificial flowers to allow the appearance of the device to be changed as desired.
This document describes GB780083 (A), a British patent from 1957 for an improved ornamental or display device. The device consists of a supporting plate with one or more removable vases that can be connected to the plate using press studs. The vases can be different shapes and colors and can hold either real or artificial flowers to allow the user to change the appearance as desired.
This document summarizes a patent application for improvements to cooling sintered and loose solid materials using an apparatus of overlapping trays carried by an endless chain. The trays have perforated surfaces for supporting material and conduits below for flowing a cooling gas. The conduits have lateral openings to allow gas to enter compartments below the perforated surfaces, where collected material can be cooled without falling through the tray bottoms. Diagrams show variations of the conduit and perforated surface configurations within the trays.
This document summarizes a patent application for improvements to cooling sintered and loose solid materials using an apparatus of overlapping trays carried by an endless chain. The trays have perforated surfaces (grates) above the bottom for supporting material, and air conduits below the grates with exit apertures for supplying cooling air. Compartments between the conduits and grates collect material that falls through the perforations. Diagrams show the construction and modifications of the trays, grates, and air conduits.
1) The document describes improvements to hinges for cardboard boxes that allow the lid to be held open at a desired angle when opened.
2) Specifically, it involves a strip of paper or other rigid material secured to the lid and slidable with respect to the box body, with friction between the strip and box body holding the lid open.
3) The hinge replaces the usual inside hinge and avoids the need for tapes to hold the lid open, allowing adjustable display of items inside the box.
This document describes a fire extinguisher comprising a flat circular tank containing liquid and a foaming agent cartridge. It has a central discharge nozzle and a rotatable tubular arm that can cut through the cartridge to mix the foaming agent into the liquid. The arm is connected to the nozzle and has branches that ensure the mixture can be discharged regardless of the extinguisher's orientation. Rotation of a handle slides the nozzle and arm, breaking a seal and allowing the arm to cut the cartridge and discharge the foaming mixture through the nozzle.
Сытник В. С. Основы расчета и анализа точности геодезических измерений в стро...Иван Иванов
В книге изложены вопросы теории и практики расчета, бценки
и анализа точности геодезических измерений, выполняемых при
возведении промышленных, жилых и общественных зданий й\цн-
женериых сооружений. На основе существующих в теории вероят^~—-
ностей
математической статистики и ошибок измерений рассмат
риваются методы расчета необходимой и достаточной точности гео
дезических измерений
применительно к определенным стадиям
строительно-монтажных работ и конструктивным решениям зданий
и сооружений. Значительное внимание уделено анализу точности
результатов геодезических измерений
Poialkova v.m. -_lifter-akademiia_(2007)Иван Иванов
The document is illegible as it contains random characters and symbols with no discernible words, sentences or meaning. It appears to be gibberish with no real information that can be summarized.
This document provides an introduction to a master's thesis that analyzes the legal and commercial issues in EU-Russia relations in the context of sanctions policy. It outlines the goals and structure of the thesis. The thesis will examine EU-Russia relations before and after sanctions were imposed in 2014 over Ukraine, the legal framework around the sanctions, and their impact on trade. It will also explore ways to optimize EU-Russia relations going forward. The introduction establishes that relations between the EU and Russia are an ongoing issue that significantly impacts international politics and economics.
Заковряшин А. И. Конструирование РЭА с учетом особенностей эксплуатацииИван Иванов
Показана роль конструкторского проектирования в обеспечении эффективности технического обслуживания РЭА по фактическому состоянию. В книге
взаимосвязанно решаются вопросы обеспечения ремонто- и контролепригодности
при конструировании РЭА. Ремонтопригодность рассматривается лак решающи”
фактор обеспечения эффективности применения аппаратуры. Область значений
конструктивных показателей РЭА определяется как результат решения задачи
оптимизации заданного качества функционирования.
The document provides guidance for directors of music in senior high schools on producing effective musical programs. It discusses various types of programs, considerations for program building such as attention, contrast and continuity. Organization, administration, publicity, programs/tickets, staging, lighting, costuming and other elements are covered. Experimental research was conducted, including visits to Radio City Music Hall and small theaters, to study professional practices.
1) Adolph W. Berkner of Cayuga, North Dakota invented an improved elevator bucket design.
2) Berkner's elevator bucket has a yieldingly supported bottom plate that can open under excessive weight to prevent overloading, and automatically closes when the weight reaches a predetermined amount to deliver accurate amounts.
3) The bottom plate is flexibly supported by a leather or metal strip attached to the top edge and backed by a metal strip, and is held closed by an arcuate leaf spring.
This document describes a radio navigation system that provides continuous indications of bearing and distance from a transmitter beacon to a receiver. It utilizes a single transmitter and receiver at the beacon location and a transmitter and receiver at the mobile location. The pulsed output of the distance measuring beacon is amplitude modulated with fundamental and harmonic bearing signals. At the mobile receiver, the distance is obtained from the timing of distance measuring pulses while the bearing is obtained by comparing the phase of the envelope wave components and reference signals.
This document describes a process for producing hydrocarbon drying oils through the polymerization of butadiene and styrene monomers in the presence of sodium catalyst. It discusses conducting the reaction in a reactor, then treating the product solution with an organic acid to convert the sodium into a filterable salt. The process aims to improve upon large-scale production by continuously feeding reagents to a reactor while removing the polymerized product, and pre-treating make-up materials to improve reaction efficiency.
This document describes improvements to a carbonating apparatus for producing aerated water. It details a conventional carbonator design and issues with maintaining proper carbonation levels and water temperature. The invention aims to address these issues by wrapping the carbonating chamber in helical coils of pipes, with one pipe carrying water and the other a refrigerant. This design cools the chamber directly to maintain carbonation levels while reducing operating pressures and refrigeration needs.
1. * GB780132 (A)
Description: GB780132 (A) ? 1957-07-31
Improvements in and relating to powder-dispensing devices
Description of GB780132 (A)
COMPLETE SPECIFICAMON
Improvements in and relating to Powder-Dispensing Devices
I, WILLIAM JOHN HARRIS, a British Subject, of Betholm, Menin Way,
Farnham,
Surrey, do hereby declare the invention for which I pray that a patent
may be granted to me, and the method by which it is to be performed to
be particularly described in and by the following statement:
This invention relates to powder-dispensing devices, and aims at the
provision of simple means, more especially for domestic use, whereby
powder (e.g. a detergent) can be delivered from a container, such as a
carton, in successive, and reasonably uniform, amounts.
With this end in view the invention consists in a powder-dispensing
device, in the form of a separate unit detachably securable to one
side of a carton or like powder container, said dispensing device
comprising an enclosure provided with inlet and outlet apertures for
the powder, and a zig-zag or serpentine passage-way between said inlet
and out- let apertures through successive stages of which the powder
can be caused to pass by repeated tipping of the dispensing device.
Owing to the conformation of the passage way, some powder is admitted
into it upon an initial tipping of the powder container fitted with a
dispensing device. Upon a reverse tipping movement, some of this may
be returned to the container, but the remainder (or the whole if none
is returned) of the powder initially admitted proceeds further along
another section of its serpentine or zig-zag path.
By this means the amounts of powder successively passing through the
dispenser are maintained at a reasonably uniform value If desired the
dispenser may be provided with relatively adjustable parts allowing
variation as desired of the uniform amount successively dispensed.
Conveniently a dispenser according to this invention may be made of
cardboard or the like, and in a preferred form of the invention the
2. dispenser is formed from a single blank of cardboard cut to suitable
shape, and conveni ently scored and/or creased, so that it can be
folded up and secured (e.g. by adhesive edging) to form an enclosure,
with inlet and outlet apertures, and internal partition walls defining
a zig-zag or serpentine passage through which the inlet and outlet
apertures are in communication.
A dispenser according to the invention may be detachably secured to a
carton or like powder container by resilient means, (e.g. an elastic
band), springcatch or clip means, hook like means or a spout adapted
to puncture the container, or in any other convenient manner.
The invention will be clearly understood from the following
description of a few forms (given, however, merely by way of example)
which it may assume, and this description will be more readily
followed by reference to the drawings comprising Figures 1-9
accompanying the provisional specifications of Patent
Applications No. 9026/55 and Figures 10-13 accompanying the
provisional specification of
Patent Application No. 23286/55 herewith.
In carrying the invention into effect in one convenient manner as
shown in the aforesaid drawings, a powder dispenser, intended more
especially for domestic use, may be formed of a hollow truncated
wedge-shaped enclosure with a base 1, and upper wall 2 perpendicular
to the base 1, a lower wall 3 inclined towards the upper wall 2 and
side walls 4, 5. The upper wall 2 may be extended beyond the base 1 to
form a flap or ledge 6. The enclosure may be of substantially the same
width as a standard powder carom e.g. a detergent carton, used
domestically, so that the base 1 and ledge 6 can fit and engage the
top side of a carton 7 as seen in Figure 1. Means may be provided for
temporarily holding the enclosure on the carton in this position, and
in one convenient form these means may com- prise pins 8 or like
abutments from the side walls .4, 5 engageable by an elastic band 9
stretched round the carton 7.
The base 1 of the truncated wedge-shaped enclosure, (now forming the
rear walls of the
dispenser) is formed near to its upper edge
with an inlet aperture 10, conveniently rectangular, and the aperture
formed between the
outer edges of the convergent walls 2, 3 and the sides 4, 5, serves as
an outlet aperture 11.
Internally the enclosure is provided with partitions which restrict
the passageway thrcugh the enclosure and ensure that ny- thing such as
powder, passing from the inlet
10 to the outlet 11 must follow a Z-shaped, sinuous or serpentine
path. These partitions extend fully between the sides 4, 5 (to which
3. they may be rigidly secured), and comprises one partition 12 inclined
upwards from the rear wall 1 (which it meets adjacent to the lower
edge of the inlet 10), and another partition 13 inclined downwards
from the forward edge of the upper wall 2, and projecting into the
enclosure. The partitions 12, 13 may, as shown, be parallel to one
another and to the inclined wall 3 of the enclosure; and they
preferably overlap, but stop short of the walls (upper wall 2 and rear
wall I respectively) towards which they project.
When a dispenser such as described above is in use an aperture
corresponding to, or within the bounds of, inlet 10 of the dispenser,
is cut or pierced in the side wall of the carton 7 near to its top
edge, and the dispenser is then detachably secured to the carton, as
shown in Figure 1, with inlet 10 in register with this aperture in the
carton. The carton is then tipped so that the outlet 11 of the
dispenser is directed downwards, and it will be seen that fluent
powder from the carton enters the dispenser through the inlet 10 and
fills the wedge-shaped internal recess between the wall 2 and
partition 13, up to the level at which the edge of partition 12
approaches wall 2, whereafter further outflow of powder is arrested.
The carton is then raised to an erect position (Figure 1), and while
some powder is guided back into the carton by partition 12 it will be
clear that much or all of the powder in the recess between wall 2 and
partition 13 slides down the said partition to fill the recess between
the rear wall 1 and lower wall 3 at the base of the dispenser
enclosure. When the carton is tipped for a second time the powder in
this lastmentioned recess between the walls 1 and 3, slides down wall
3 and is discharged at outlet 11. It will be noted that during this
second act of tipping the carton, a second charge of powder flows into
the recess between partition 13 and wall 2, at the same time as the
first charge of pcwder is escaping through outlet 11, and when the
carton is next erected this second charge of powder falls to the
recess between walls 1 and 3. Thus it will be seen that each time the
carton is tipped up (after the initial tipping), nct only is one
charge cf powder delivered, but a second charge is measured out in
readiness for subsequent delivery. The amount of powder forming a
charge is determined approximately by the dimensions of the partition
13, the spacing between the edge
of partition 12 and wall 2, and the degree of overlap of the
partitions 12 and 13. These measurements can be prearranged to provide
dispensing of any desired amount of powder for each discharge.
A dispenser such as described above may be fabricated from sheets of
cardboard, wood, metal or plastic, or may be moulded from a synthetic
resin.
A slightly modified form of dispenser according to the invention which
4. can be simply and cheaply constructed from a single blank, e.g. of
cardboard or the like, suitably cut, creased and scored, as
illustrated in
Figures 3 and 4, and a blank for such a dispenser is illustrated in
Figure 5 of the drawings.
From Figures 3 and 4 it will be seen that partitions 12, 13 and lower
wall 3 cf the dispenser are not now parallel to one another.
Partition 12 projects from the rear of the enclosure into the angled
recess between partition 13 and the top of the enclosure, while
partition 13 extends downwards and inwards from the front edge of the
top of the enclosure to engage in the angled recess between the rear
and lower wall of she enclosure. The partitions are provided with
apertures 14, 15 respectively to allow passage of powder and these
are, as shown, misaligned in the enclosure, so that the passage way
communicating between the inlet and outlet of the enclosure is of
Z-shaped or zig-zag form. The side walls 4, 5 may be provided with
inclined slots 16 adapted to be engaged by an elastic band 9 for
holding the dispenser against a carton 7 (Figure 3), as previously
described, whereafter the operation of the dispenser is the same as
set out above.
In Figure 5 is shown a single-piece blank, e.g. of cardboard, which
may be folded and assembled to form a dispenser as shown in
Figures 3 and 4. The partition 12 with lower extension is folded down
about score line 17 to be at right angles to side wall 5, and the
partition bent inwards about score line 18 to align with chain line
19. The partition 13, with its extension, is folded down about line 20
to be perpendicular to side wall 5, and the partition folded in about
score-line 21 to be aligned with the chain-line 22. The lower wall 3,
side wall 4 and upper wall 26 can then be folded at their score-lines
down beneath up and over the folded partitions, and the rear wall 1
can be folded about its score line behind the lower extension of
partition 12. If desired the outer foldable portions, e.g. unper wall
2, and rear wall 1, may be provided with means, e.g. adhesive strips
23, whereby they can be secured in position when the dispenser is
appropriately folded and assembled.
According to a modified form Of the inven tion a powder dispenser,
constructed and operable substantially as described above, may be
adjustable in order to vary, at will, the amount of powder
incorporated in each charge delivered. One embodiment of this modified
form of the invention is shown in Figures 6 and 7 from which it will
be seen that, as in the forms of dispenser above described an
enclosure comprises an upper wall 2, with ledge 6, a rear wall 1, with
aperture 10, a lower wall 3, and partitions 12 and 13 which, as
before, define a zig-zag or serpentine passage through the enclosure.
5. In this case, however, the upper wall 2 is raised to be sub stan-
tially parallel to the partition 12, and the rectangular opening
formed between side walls 4, 5 and the free edges of partition 13 and
the upper wall 2, is closed by a cuboidal box like structure 24
telescopically fitted therein, as shown. It will be seen that when the
dispenser is fitted to a carton (as previously described), and the
carton is tipped forward, the amount of powder separated out in the
dispenser for the initial charge to be delivered is deteriraned mainly
bv the said between the outer end of partition i2, and the end wall of
the closure member 24. As seen in Figure 7 the member 24 can be
adjusted to modify this spacing and thereby to vary the amount of
powder included in each discharge. As before this dispenser may be
held to a carton by an elastic band engaging in slots 16, and
conveniently these slots extend beyond the edges of the member 24 so
that the elastic band 9 bears on the member 24, and holds it, by
friction, in any desired preset position.
A slightly modified form of the invention employing tubular elements
is illusltrated in
Figures 8 and 9. The dispenser here comprises a rear wall l, with
flange 6, and a circular aperture 10 in the rear wall over which is
attached an inner tube 25, over which is fitted an intermediate tube
26 of larger diameter, closed at its outer end, and outside this
intermediate tube 26 is fitted an outer tube 27 of yet larger
diameter. The three tubes are in line contact at their uppermost
points, and are preferably axially inclined upwards slightly in
reflation to the rear wall 1 as fitted to a carton 7. The lower side
of tube 26, near to rear wall 1, is formed with an aperture 28, and it
will be seen that this form of the invention operates and functions in
substantially the same way as previously described.
If desired the tube 26 may be formed of two telescoping portions,
relatively adjustable, as seen in Figure 9, to allow variation of the
dispensed amount of powder, as described with reference to Figures 6
and 7 above.
It has been found that in devices of the forms above described there
is a tendency for some powders therein to cake or form a crust when
standing unused for a while, and in further forms of the invention the
design is modified in order to reduce or eliminate this disadvantage.
Powder-dispensing devices incorporating these modifications are of the
same general character as described above insofar as they are
detachably securable to a carton, and comprise chamber-like spaces
disposed so that by an initial tipping of the qarton powder is
received from the carton by the upper chamber, and passes to the lower
chamber when the carton is thereafrer erected, later being delivered
from the lower chamber for use when the carton is next tipped. During
6. this subsequent tipping operation mare powder is; received by the
upper chamber3 in readiness for the succeeding cycle. The dimensions
of the chambers and/or the passages or apertures through which the
powder passes are selected so that approximately a prearranged
quantity of powder is delivered from the carton at each tipping, and
apportioning of the powder in this manner is pro cured by arranging a
serpentine or zig-zag path of prearranged dimensions to be followed by
the powder in stages during its passage of the carton.
In the modified forms of this invention aforesaid a powder-dispensing
device of the general character indicated above is formed with a lower
chamber of which opposite walls diverge from the bottom so that there
is greater freedom of flow of the powder to the dispenser outlet when
the carton is tipped forward. The base of this lower chamber may be of
curved, trough-like shape, or formed with a flat portion which is
substantially hcrizontal when the canon is upright, in order to avoid
an acute-angle recess between the chamber walls in which powder would
tend to be confined.
One modified form of the invention is shown in Figure 10 of the
drawings from which it will be seen that a powder dispenser is in the
form of a cuboidal or box-shaped casing having a rear wall 1, a " roof
" 2, and front wall 3, and a trough-shaped base 30, closed by end
walls 31. The rear wall 1, near to its upper edge is formed with an
inlet aperture 1Q and the lower part of the front wall 3 is formed
with an outlet aperture 11.
Downwardly inclined from the upper edge of outlet aperture 11 is a
partition 13 projecting into the casing towards the rear of the base,
and extending fully between the end walls 31, dividing the casing into
upper and lower chambers communicating by a gap or passage left
between the lower edge of the partition 13 and the rear wall 1 of the
casing.
Rearwardly from the inlet 10 extends a tube or spout 32, rigid with
the casing, which at its- free end is preferably formed with edges 33
in a plane inclined to the tube axis to provide a pointed tip suitable
for piercing the wall of a carton. Adjacent to the rear wall 1 the
tube 32 is formed with a ring groove 34 in which the edges of the
carton aperture engage to grip the tube when the latter is forced
through the carton wall. The spout 32 is preferably forced through the
carton side wall close to the top edge of the carton so that the upper
side of the spout 32 bears against the inner surface of the carton
roof, while the rear wall 1 bears against the exterior of the carton
side wall, and the whole, being held in position by the groove 34
engaged by the carton, is thus firmly affixed.
In use the dispenser shown in Figure 10 operates as previously
described, viz., when the carton is first tipped forwards a
7. prearranged quantity of powder passing from the carton through the
tube 32 is received by the upper chamber defined by the partition 13
with roof 2, front wall 1 and the closing end walls. When the carton
is erected this measured quantity of powder falls into the trough base
30, and when the carton is next tipped it escapes therefrom through
outlet 11, while a second charge of powder is being received in the
upper chamber.
A slightly modified form of the invention is shown in Figure 11 of the
drawings wherein the same details are identified by the references
shown in Figure 10. In this form of the invention the base of the
casing is modified, and, in place of the trough 30, is formed with a
flat, horizontal portion 35, and an upwardly inclined forward wall 36.
This form of base facilitates flow of powder to the outlet, and thus
reduces the disadvantages arising from the possibility that when left
standing for some time powder may tend to compact or cake, or form a
"crust" in the lower chamber.
In this, or in any other form of the invention, the danger that powder
in the lower chamber and/or in the carton may cake by absorbing
moisture may, if desired, be reduced by fitting to the outlet a flap
37 hinged sr 38 adapted to swing forward when the car ton is tipped,
and to close the outlet, as shown. when the carton is erect.
Referring to Figure 12 of the drawings herewith the tube or spout 32
of forms of the invention such as described above may, if desired, be
formed with a screw-thread 39 instead of the groove 34 so that by
screwing the spout into the carton an even firmer engagement therein
may be ensured.
In the forms of the invention shown in
Figures 10 and 11 herewith the tube or spout 32 is shown as integral
with the casing. In modified forms of the invention the tube or spout
32 may be detachablv secured to the casing, e.g. by being screwed into
the aperture 10. In this case, if desired, the tube 32 may project
into the casing and be adjustable, by screwing, to vary the distance
between the inner end of the tube 32 and the front wall 3. which
determines the measured quantity of powder received by the uDper
chamber at each tipping of the carton. This arrangement thus allows
adjustment, as desired, of the measured quantity of powder dispensed
at each discharge. The same result may be achieved by providing in the
tubular spout 32 (whether integral with or detachable from the
casing), and inner tube slidable therein to afford variation of the
spacing between the inner end of the slidable tube and the front wall
3.
The forms of the invention described with reference to Figures 10--12
may be formed of metal, mouldable plastic materials (which may, if
desired, be transparent), or any other convenient material.
8. A further simplified form of powderdispenser, according to the present
invention, which may be formed by folding a single blank of material,
e.g. a cardboard, is shown in Figures 13 and 14 of the drawings
herewith. A blank for such a dispenser is shown in Figure 13, wherein
the dotted lines represent scorings to facilitate folding. The rear
wall 1 is, as before, formed with inlet aperture 10, and is connected
by an inner side wall 40 to the partition 13 integral with which are
another inner side wall 41, the roof 2 with a flange 42 and side lugs
43. Extending from the other edge of the rear wall 1, and integral
therewith and with one another are the outer sioe walls 4, and the
front wall 3 of the dispenser, while the lower edge of the rear wall 1
has integral therewith a base 44 with side flaps 45.
In forming a dispenser from the blank shown in Figure 13 the side wall
40, partition 13 and side wall 41 are folded over so that the edge of
inner side wall 41 rests in the scored line between rear wall 1 and
outer side wall 4. The outer side walls 4 and front wall 3 are then
folded over to encase the folded partition 13, so that the free outer
side wall 4 is flush with the exterior of inner side wall 40.
The roof 2 is then folded down and by flaps 43 is secured e.g. by
adhesive externally to the outer side walls, and the base 44 folded up
and likewise secured in position by upturned lugs 45. The walls and/or
lugs of the blank. as desired, may be provided with gummed edges to
facilitate assembly. A dispenser having a cross-section as shown in
Figure 14 is provided by folding the blank as described above, and
this may be affixed to the carton by a rubber band, or by any other
convenient means, with the flange 42 overlapping the top edge of the
carton, and the inlet 10 aligned with an aperture in the carton side
wall. When fitted this dispenser operates as previously described.
It should be understood that any feature embodied in one or more forms
of the invention above described, (e.g. the spout 32 shown in Figures
10, 11, or 12, whether rigid with or detachably securable to the
casing, or the hinged flap 37 shown in Figure 11) may, if desired, be
incorPorated in other forms of the invention described (e.g. those
shown in
Figures 1-4 or Figures 6-9).
Any of the forms of the invention described above may, if desired, be
fitted with a layer of felt, or rubber, or other suitable sealing
material on the rear face of the rear wall 1, to prevent escape of
powder between this wall and the carton wall on to which it is
pressed.
From the above description it will be seen that the invention
provides, as a single unit suitable for detachably securing to a
powder carton or the like, a dispensing device suitable for domestic
and other use, but it should be understood that the invention is not
9. limited solely to details of the forms described above which may be
modified in order to meet various conditions and requirements
encountered, without departing from the scope of the invention.
What I claim is:1. 1. A powder-dispensing device in the form of a
separate unit detachably securable to one side of a carton or like
powder container, said dispensing device comprising an enclosure
provided with inlet and outlet apertures for the powder, and a zig-zag
or serpentine passage Way between said inlet and outlet apertures,
through successive stages of which the powder can be caused to pass by
repeated tipping of the dispensing device.
2. A powder-dispensing device as claimed in Claim 1 wherein the final
or outlet stage of said passage is a substantially linear conduit
adapted to be upwardly directed and either inclined from, or
substantially parallel to, the side wall of the carton in erect
position, when the device is secured thereto.
3. A powder-dispensing device as claimed in Claim 1 or 2 comprising a
box-like encloc sure having a powder-inlet aperture in one side wall
and a powder-outlet aperture in another wall remote from said inlet
aperture, and at least one partition wall inside the enclosure
intervsning between said inlet ard outlet apertures to prevent direct
passage of powder from the inlet aperture to the outlet aperture.
4. A powder-dispensing device as claimed in Claim 3 wherein the
partition divides the enclosure into substantially separate
compartments which are in communication with one another only by way
of a comparatively limited passage between an edge of the partition
and the inner surface of a wall of the enclosure.
5. A powderAispensing device as claimed in Claim 4 wherein the
substantially separate compartments are so located in relation to the
inlet and outlet apertures that upon tipping of the device one
compartment is substantially beneath the powder-inlet aperture and
receives powder therefrom, while the other compartment is
substantially above the powder-outlet aperture and discharges powder
therethrough.
6. A powder-dispensing device as claimed in Claim 5 wherein the
limited passage through which the compartments communicate with one
another is so located that when the device is re-erected after a
tipping the powder received during the tipping operation in the
compartment adjacent to the inlet aperture automatically passes into
the compartment adjacent to the outlet aperture in readiness for
discharge when the device is next tipped.
7. A powder-dispensing device as claimed in any preceding claim
wherein part of the zig-zag or serpentine passageway constitutes a
measuring compartment adapted to receive substantially a prearranged
amount of powder when the device is tipped for the passage of powder
10. into the device.
8. A powder-dispensing device as claimed in any preceding claim
wherein the enclosure is adjustable to allow variation as desired of
the amount of powder forming each discharge.
9. A powder-dispensing device as claimed in Claim 7 or 8 comprising a
tubular element adjustable in the enclosure.
10. A powder-dispensing device as claimed in Claim 7, 8 or 9
comprising sections of the passageway telescopically engaged and
adjustable, for the purpose of adjusting the dimensions of the
measuring compartment
11. A powder-dispensing device as claimed in any preceding claim
wherein the enclosure has a flat rear face to rest flush against the
side of a carton, with an aperture to register with an opening in the
side of the carton.
12. A powder-dispensing device as claimed in Claim 11 wherein the
enclosure is provided with a projection, e.g. a flange, perpendicular
to the flat rear face for resting on the top of the carton when the
device is fitted to the side thereof.
13. A powder-dispensing device has claimed in any preceding claim
fitted with a rigid spout or the like adapted ro pierce a hole in the
wall of a carton as the device is being fitted thereto.
14. A powder-dispensing device as claimed in any of Claims 1-6
comprising an articu- lated cover for the powder outlet adapted ro
close the outlet when a carton fitted with the dispensing device is
erect, and to open, allowing passage of powder, when the carton is
tipped.
15. A powder-dispensing device as claimed in any of claims 1-7, or in
Claim 11 or 12 when appendant to any of Claims 1-7, formed from a
single blank of cardboard or the like cut to suitable shape and
creased or scored along fold lines for folding into the form of a
powder-dispensing device.
16. A powder-dispensing device substantially as described herein. with
reference to
Figures 1-4. or Figures 6-9 of the drawings accompanying Provisional
Specil cation NoL gO26/55, or to Figures 10--12 of the drawings
accompanying Provisional Specification
No, 23286/55.
17. A blank for a powder-dispensing device substantially as described
herein with refer