690nm Red SM Laser TEM00 Laser source.docx
•Download as DOCX, PDF•
0 likes•6 views
This is a 690nm 30mW red laser system. Its output power can be adjusted from 0 to 30mW. The working voltage is AC 90~240V, supports wide range voltage. It support CW/Modulation two working modes. This is a single transverse film laser. Let's check it now.
Report
Share
Report
Share
![[Specification]
Product Name: 690nm semiconductor laser
Lead Time: 1~3 weeks!
Wavelength: 690±5 nm
Output Power: 1~30mW
Spectral Linewidth：<2nm
Beam Diameter: Near 1*2.5 mm
Beam Divergence Angle: Near 1 mrad
Power Stability: <3% per 2hours
Operating Temperature: 0°C~+40°C
Storage Temperature: -40°C~+85°C
Temperature Stabilizing: TEC
Warm Up Time: <5 minutes
MTTF(mean time to failure): 10,000 hrs
Laser Dimension: Near 102(L)x35(W)x35(H)mm
ower Supply: Adjustable Power Supply
Modulation: 0~10KHz TTL
Warranty：1 year
The test data report of 690nm 30mW semiconductor laser:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
JDASU Q302 High-Power Q-Switched Diode-Pumped Laser
The document describes JDSU's Q Series lasers, which are high-power diode-pumped lasers that provide 355 nm or 532 nm outputs. They use intracavity harmonic generation for high efficiency and stability. Models in the Q301-Q333 range provide up to 10 W of output power at 355 nm, while Q201-Q202 models provide up to 12 W at 532 nm. The lasers feature excellent beam quality, stability, and lifetime. They are suitable for micromachining, wafer processing, and other materials processing applications.
LoRa Gateway Fiberglass antenna specification and Features
This document provides specifications for an 860-930MHz LoRa antenna. The antenna has a frequency range of 860-930MHz to suit both 868MHz and 915MHz bands. It has a maximum gain of 3dBi and is vertically polarized. Charts show the antenna's VSWR, efficiency, and gain across the frequency range as well as antenna patterns for various frequencies. Mechanical specifications including dimensions and connectors are also listed.
custom-ultra-short-pulse-lasers-systems
Applied Energetics builds custom ultra-short pulse laser systems for applications such as micro-machining, photomask repair, thin film scribing, and defense. They have systems capable of 10mJ pulses at 1kHz with <2ps pulse widths, as well as a transportable laser laboratory that can generate 5 terawatts of peak power with >400mJ pulses at 10Hz. Applied Energetics' lasers cover a wide range of pulse energies, widths, and repetition rates using different gain media like Yb:KYW, Yb:YAG and Ti:Sapphire.
quick sense innovations
Quick Sense Innovation is a Technology Company with assimilated businesses of research, production, and sales and production of affordable energy-saving electronic switches and home products. We believe that creative thinking is the prime key to gain success in the intensely competitive sector. Based on this, we always work with our team with the mission to create countless innovative products and thereby, deliver them to fulfill the requirements of our society.
https://www.quicksense.in/
HEE
This document provides information about low ohm power resistors made by HTR. It describes the resistors as having an open frame electron beam welded punched out design. Key specifications listed include power ratings of 10W at 100C and 15W at 70C, resistance tolerance ranges, and dimensions. Application areas mentioned are current sensing, welding, and frequency conversion. The document also provides charts showing typical power derating curves and temperature dependence.
Hee
This document provides information on low ohm power resistors made by HTR. It describes the resistors as having an open frame electron beam welded punched out design. They have power ratings of 10W at 100°C and 15W at 70°C. The document includes details on resistance values and tolerances, dimensions, applications, features, recommended solder profiles, electrical and environmental characteristics, derating curves, packaging, and ordering information.
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HRE (...
This product is a type of Electron Beam Welded, which is a type of Current Sense Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hre/
emi/emc
The document summarizes environmental testing performed on electrical equipment at an environmental test facility. Various labs are described that can simulate environmental conditions like vibration, shock, climate, and EMI/EMC. Specific dynamic and vibration test equipment are listed, as well as climatic chambers, a thermal shock chamber, and vacuum equipment. EMI/EMC testing procedures are discussed including radiated emission, conducted susceptibility, and radiated susceptibility tests. The document provides an analysis of EMI/EMC testing performed on an electrical unit to verify its reliability and compliance with standards.
Recommended
JDASU Q302 High-Power Q-Switched Diode-Pumped Laser
The document describes JDSU's Q Series lasers, which are high-power diode-pumped lasers that provide 355 nm or 532 nm outputs. They use intracavity harmonic generation for high efficiency and stability. Models in the Q301-Q333 range provide up to 10 W of output power at 355 nm, while Q201-Q202 models provide up to 12 W at 532 nm. The lasers feature excellent beam quality, stability, and lifetime. They are suitable for micromachining, wafer processing, and other materials processing applications.
LoRa Gateway Fiberglass antenna specification and Features
This document provides specifications for an 860-930MHz LoRa antenna. The antenna has a frequency range of 860-930MHz to suit both 868MHz and 915MHz bands. It has a maximum gain of 3dBi and is vertically polarized. Charts show the antenna's VSWR, efficiency, and gain across the frequency range as well as antenna patterns for various frequencies. Mechanical specifications including dimensions and connectors are also listed.
custom-ultra-short-pulse-lasers-systems
Applied Energetics builds custom ultra-short pulse laser systems for applications such as micro-machining, photomask repair, thin film scribing, and defense. They have systems capable of 10mJ pulses at 1kHz with <2ps pulse widths, as well as a transportable laser laboratory that can generate 5 terawatts of peak power with >400mJ pulses at 10Hz. Applied Energetics' lasers cover a wide range of pulse energies, widths, and repetition rates using different gain media like Yb:KYW, Yb:YAG and Ti:Sapphire.
quick sense innovations
Quick Sense Innovation is a Technology Company with assimilated businesses of research, production, and sales and production of affordable energy-saving electronic switches and home products. We believe that creative thinking is the prime key to gain success in the intensely competitive sector. Based on this, we always work with our team with the mission to create countless innovative products and thereby, deliver them to fulfill the requirements of our society.
https://www.quicksense.in/
HEE
This document provides information about low ohm power resistors made by HTR. It describes the resistors as having an open frame electron beam welded punched out design. Key specifications listed include power ratings of 10W at 100C and 15W at 70C, resistance tolerance ranges, and dimensions. Application areas mentioned are current sensing, welding, and frequency conversion. The document also provides charts showing typical power derating curves and temperature dependence.
Hee
This document provides information on low ohm power resistors made by HTR. It describes the resistors as having an open frame electron beam welded punched out design. They have power ratings of 10W at 100°C and 15W at 70°C. The document includes details on resistance values and tolerances, dimensions, applications, features, recommended solder profiles, electrical and environmental characteristics, derating curves, packaging, and ordering information.
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HRE (...
This product is a type of Electron Beam Welded, which is a type of Current Sense Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hre/
emi/emc
The document summarizes environmental testing performed on electrical equipment at an environmental test facility. Various labs are described that can simulate environmental conditions like vibration, shock, climate, and EMI/EMC. Specific dynamic and vibration test equipment are listed, as well as climatic chambers, a thermal shock chamber, and vacuum equipment. EMI/EMC testing procedures are discussed including radiated emission, conducted susceptibility, and radiated susceptibility tests. The document provides an analysis of EMI/EMC testing performed on an electrical unit to verify its reliability and compliance with standards.
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...
This product is a type of Current Sense Open Frame Resistors, which is a type of Current Sense Resistors. Features of this product are:Open frame axial type, Negligible inductance, Low TCR. This product is consumable for Switching, Linear Power Supplies, Instruments, Regulators and other modern current sensing circuits.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/oa/
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...
This product is a type of Current Sense Open Frame Resistors, which is a type of Current Sense Resistors. Features of this product are: Open frame PCB mounting radial type, Negligible inductance, Low TCR. This product is consumable for switching, Linear Power Supplies, Instruments, Regulators and other modern current sensing circuits.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/op/
Vis-Spectrophotometer
Visible spectrophotometer offers 330 to 1000 nm wavelength range with single beam has 1200 lines/mm grating C-T monochromator
optical system. It uses silicon photo diode detector and tungsten lamp as light source which provides the best wavelength
coverage across the working range of the spectrophotometer. The Display screen show the concentration data. This highly
accurate spectrophotometer is designed for industries and laboratories.
520nm 10W High Power Semiconductor Laser Coupled SMA905 Fiber
It is a 520nm 10W fiber coupled laser system. There is a radiator at the bottom of the laser head. The radiator is composed of an aluminum sheet and a cooling fan. The 'CW|TTL|Analog' on the back of the laser power supply is the selection button for 3 working modes. The 'Adjustor' knob is used to adjust the size of the current to control the laser output power. Let's check it now.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame and electron beam welded with punched out terminals.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values range from R0001 to R002 with tolerance levels of ±0.25%, ±0.5%, ±1%, ±2%, ±3% and ±5%.
- Dimensions and other specifications are provided for 8 different models.
HEE
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame and electron beam welded with punched out terminals.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and temperature stability.
- Performance specifications address parameters like power rating, temperature range, life testing, and environmental resistance.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame electron beam welded punched out types.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and temperature stability.
- Environmental and performance specifications are listed, such as temperature range, derating curves, and packaging information.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame electron beam welded punched out types.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and excellent stability.
- Environmental and electrical test standards and requirements are listed.
DYHX-001.pdf
Column Sensor | Cantilever Beam Load Cell | S-type Tension Pressure Sensor | Capsule Sensor | Tension Sensor | Multi Dimensional Force Sensor | Micro Sensor | Spoke Pressure Sensor | Weighing Module | Static Torque Sensor | Dynamic Torque Sensor | Diffused Silicon Pressure Transmitter | Weighing Junction Box | Weighing Transducer
Covesion ppln
Covesion is a pioneer in PPLN (Periodically Poled Lithium Niobate) technology for laser wavelength conversion. They design and produce custom and standard PPLN crystals using their in-house poling process and cleanroom facilities. PPLN crystals offer high conversion efficiency, wide tunability, easy control, and excellent stability for applications such as second harmonic generation, sum frequency generation, difference frequency generation, and optical parametric oscillation. Covesion provides high quality PPLN products along with unparalleled technical support to partners.
DYHX-003.pdf
Column Sensor | Cantilever Beam Load Cell | S-type Tension Pressure Sensor | Capsule Sensor | Tension Sensor | Multi Dimensional Force Sensor | Micro Sensor | Spoke Pressure Sensor | Weighing Module | Static Torque Sensor | Dynamic Torque Sensor | Diffused Silicon Pressure Transmitter | Weighing Junction Box | Weighing Transducer
MProbe VVisHR brochure
The document describes the MProbeVisVHR thin film measurement system. It can measure film thicknesses with a precision of 0.01nm or 0.01% and accuracy of 0.2% or 1 nm. It can measure a wide range of thin films and thicknesses from 15nm to 350um. Measurements include thickness, optical constants, and surface roughness. The system provides real-time analysis and has an extensive materials library. It is a flexible desktop system that can integrate with external systems.
Novel route to high quality ablation in a range of materials with a 400 w sin...
Novel route to high quality ablation in a range of materials with a 400 w single mode continuous wave fiber laser white paper from JK Lasers.
808nm 100mW IR Laser System PM Fiber Output
This is 808nm 100mW infrared laser system coupled polarization-maintaining fiber. The working voltage is AC 90~240V and supports wide range voltage. Its laser power can be adjusted from 0~100mW, and it supports two working modes of CW/Modulation.
HTR India - Products - Current Sense Resistors - Ceramic Encased Resistor - H...
This product is a type of Ceramic Encased Resistor, which is a type of Current Sense Resistors. Features of this product are: Flat vertical mounting type, Negligible inductance, Ceramic legs for greater stability also act as heat sink, PCB space saving resistor. This product is consumable for: Current sensing, Industrial and consumer electronics.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hmvl/
Nano-Spectrophotometer
Nano spectrophotometer with full spectrum light covers wide wavelength range of 200 to 800nm. It requires only 0.5 - 2.0 µl micro-volume sample for
measurement which takes place within 5 seconds. It utilizes CCD detector, Xenon flash lamp as light source which has high stability and long operating life.
They are used to detect micro volume quantities of nucleic acids and other concentrated or dilute components.
Fluke Multimode OTDR for Troubleshooting and Extended Certification – 2
This document provides specifications for Fluke's multimode and singlemode OTDR modules, as well as a FiberInspector probe and VFL. It details the modules' wavelength ranges and measurement capabilities, as well as technical specifications for pulse widths, dynamic range, distance measurement range, and more. Additionally, it outlines the probe's magnification, field of view, particle detection size and dimensions. The document provides this information to help users understand and select the appropriate equipment for troubleshooting and certifying optical fiber networks.
DYDW-003.pdf
DYDW-003 2-Axis 20N 30N 50N Tension Force And Torque Force 3N.M Measurement Load Cell Alloy Steel Weighing Sensor
Presentación de productos SEOUL
This document summarizes several LED products for lighting applications. It provides specifications for multiple product lines including: LCW100Z1, LCW100Z2, 803 Series, 728 Series, 5630 Series, P4 Series, Z5, Z6, Z7, and A3. For each product line, it lists key advantages, applications, size, electrical and optical characteristics, and production schedules. The level of detail provided about specifications allows for comparison of performance across the different LED options.
M2 surgical laser 1470nm & 980nm for EVLT/PLDD/Proctology/Lipolysis
1470nm and 980nm can be selected individually or blended together.
International standard laser connector suitable for the connection of all mainstream accessories.
Self-developed radial fiber brings effective clinical performance and affordable expense.
Patented intelligent hardware control system ensures stability.
HD nature-touched LCD screen contributes to easy and rapid set-up.
Modern and easy-to-use operating system.
760nm 1500mW All-in-one Fiber Coupled Laser
It is a 760nm near infrared fiber coupled laser system. The laser power supply and laser output part are integrated in one chassis. There is a PC/M button on the back of the laser, the default is 'M' mode, that is, manual mode. 'PC' mode is software control mode, users can add this function. The Modulation interface on the back is used to connect 0~10KHz modulation signal. When there is no signal input, it is CW continuous working mode.
1550nm 10mW 1MHz Narrow Linewidth Fiber Laser
1550nm 1MHz narrow linewidth fiber laser is a high-precision, high-performance optical device. It uses optical fiber as the gain medium and generates a laser with a wavelength of 1550 nanometers through the excitation of rare earth elements. It has an extremely narrow linewidth (1MHz), thus ensuring high frequency stability and narrow bandwidth characteristics. This laser has important applications in spectral analysis, optical interference, fiber-optic communication and other fields, and can provide high-resolution and accurate measurement results. At the same time, its high beam quality is suitable for industrial fields such as precision machining and laser cutting. In short, the 1550nm 1MHz narrow linewidth fiber laser is a versatile, high-performance light source that can meet the needs of various precision measurements and industrial applications.
More Related Content
Similar to 690nm Red SM Laser TEM00 Laser source.docx
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...
This product is a type of Current Sense Open Frame Resistors, which is a type of Current Sense Resistors. Features of this product are:Open frame axial type, Negligible inductance, Low TCR. This product is consumable for Switching, Linear Power Supplies, Instruments, Regulators and other modern current sensing circuits.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/oa/
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...
This product is a type of Current Sense Open Frame Resistors, which is a type of Current Sense Resistors. Features of this product are: Open frame PCB mounting radial type, Negligible inductance, Low TCR. This product is consumable for switching, Linear Power Supplies, Instruments, Regulators and other modern current sensing circuits.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/op/
Vis-Spectrophotometer
Visible spectrophotometer offers 330 to 1000 nm wavelength range with single beam has 1200 lines/mm grating C-T monochromator
optical system. It uses silicon photo diode detector and tungsten lamp as light source which provides the best wavelength
coverage across the working range of the spectrophotometer. The Display screen show the concentration data. This highly
accurate spectrophotometer is designed for industries and laboratories.
520nm 10W High Power Semiconductor Laser Coupled SMA905 Fiber
It is a 520nm 10W fiber coupled laser system. There is a radiator at the bottom of the laser head. The radiator is composed of an aluminum sheet and a cooling fan. The 'CW|TTL|Analog' on the back of the laser power supply is the selection button for 3 working modes. The 'Adjustor' knob is used to adjust the size of the current to control the laser output power. Let's check it now.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame and electron beam welded with punched out terminals.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values range from R0001 to R002 with tolerance levels of ±0.25%, ±0.5%, ±1%, ±2%, ±3% and ±5%.
- Dimensions and other specifications are provided for 8 different models.
HEE
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame and electron beam welded with punched out terminals.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and temperature stability.
- Performance specifications address parameters like power rating, temperature range, life testing, and environmental resistance.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame electron beam welded punched out types.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and temperature stability.
- Environmental and performance specifications are listed, such as temperature range, derating curves, and packaging information.
Hee
This document describes a series of low ohm power resistors. Key details include:
- The resistors are open frame electron beam welded punched out types.
- Power ratings range from 4W to 15W depending on the model and operating temperature.
- Resistance values, tolerances, dimensions, and other specifications are provided for 8 resistor models.
- Applications include current sensing, welding, and power modules. Features include high current capacity and excellent stability.
- Environmental and electrical test standards and requirements are listed.
DYHX-001.pdf
Column Sensor | Cantilever Beam Load Cell | S-type Tension Pressure Sensor | Capsule Sensor | Tension Sensor | Multi Dimensional Force Sensor | Micro Sensor | Spoke Pressure Sensor | Weighing Module | Static Torque Sensor | Dynamic Torque Sensor | Diffused Silicon Pressure Transmitter | Weighing Junction Box | Weighing Transducer
Covesion ppln
Covesion is a pioneer in PPLN (Periodically Poled Lithium Niobate) technology for laser wavelength conversion. They design and produce custom and standard PPLN crystals using their in-house poling process and cleanroom facilities. PPLN crystals offer high conversion efficiency, wide tunability, easy control, and excellent stability for applications such as second harmonic generation, sum frequency generation, difference frequency generation, and optical parametric oscillation. Covesion provides high quality PPLN products along with unparalleled technical support to partners.
DYHX-003.pdf
Column Sensor | Cantilever Beam Load Cell | S-type Tension Pressure Sensor | Capsule Sensor | Tension Sensor | Multi Dimensional Force Sensor | Micro Sensor | Spoke Pressure Sensor | Weighing Module | Static Torque Sensor | Dynamic Torque Sensor | Diffused Silicon Pressure Transmitter | Weighing Junction Box | Weighing Transducer
MProbe VVisHR brochure
The document describes the MProbeVisVHR thin film measurement system. It can measure film thicknesses with a precision of 0.01nm or 0.01% and accuracy of 0.2% or 1 nm. It can measure a wide range of thin films and thicknesses from 15nm to 350um. Measurements include thickness, optical constants, and surface roughness. The system provides real-time analysis and has an extensive materials library. It is a flexible desktop system that can integrate with external systems.
Novel route to high quality ablation in a range of materials with a 400 w sin...
Novel route to high quality ablation in a range of materials with a 400 w single mode continuous wave fiber laser white paper from JK Lasers.
808nm 100mW IR Laser System PM Fiber Output
This is 808nm 100mW infrared laser system coupled polarization-maintaining fiber. The working voltage is AC 90~240V and supports wide range voltage. Its laser power can be adjusted from 0~100mW, and it supports two working modes of CW/Modulation.
HTR India - Products - Current Sense Resistors - Ceramic Encased Resistor - H...
This product is a type of Ceramic Encased Resistor, which is a type of Current Sense Resistors. Features of this product are: Flat vertical mounting type, Negligible inductance, Ceramic legs for greater stability also act as heat sink, PCB space saving resistor. This product is consumable for: Current sensing, Industrial and consumer electronics.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hmvl/
Nano-Spectrophotometer
Nano spectrophotometer with full spectrum light covers wide wavelength range of 200 to 800nm. It requires only 0.5 - 2.0 µl micro-volume sample for
measurement which takes place within 5 seconds. It utilizes CCD detector, Xenon flash lamp as light source which has high stability and long operating life.
They are used to detect micro volume quantities of nucleic acids and other concentrated or dilute components.
Fluke Multimode OTDR for Troubleshooting and Extended Certification – 2
This document provides specifications for Fluke's multimode and singlemode OTDR modules, as well as a FiberInspector probe and VFL. It details the modules' wavelength ranges and measurement capabilities, as well as technical specifications for pulse widths, dynamic range, distance measurement range, and more. Additionally, it outlines the probe's magnification, field of view, particle detection size and dimensions. The document provides this information to help users understand and select the appropriate equipment for troubleshooting and certifying optical fiber networks.
DYDW-003.pdf
DYDW-003 2-Axis 20N 30N 50N Tension Force And Torque Force 3N.M Measurement Load Cell Alloy Steel Weighing Sensor
Presentación de productos SEOUL
This document summarizes several LED products for lighting applications. It provides specifications for multiple product lines including: LCW100Z1, LCW100Z2, 803 Series, 728 Series, 5630 Series, P4 Series, Z5, Z6, Z7, and A3. For each product line, it lists key advantages, applications, size, electrical and optical characteristics, and production schedules. The level of detail provided about specifications allows for comparison of performance across the different LED options.
M2 surgical laser 1470nm & 980nm for EVLT/PLDD/Proctology/Lipolysis
1470nm and 980nm can be selected individually or blended together.
International standard laser connector suitable for the connection of all mainstream accessories.
Self-developed radial fiber brings effective clinical performance and affordable expense.
Patented intelligent hardware control system ensures stability.
HD nature-touched LCD screen contributes to easy and rapid set-up.
Modern and easy-to-use operating system.
Similar to 690nm Red SM Laser TEM00 Laser source.docx (20)
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...
520nm 10W High Power Semiconductor Laser Coupled SMA905 Fiber
520nm 10W High Power Semiconductor Laser Coupled SMA905 Fiber
Novel route to high quality ablation in a range of materials with a 400 w sin...
Novel route to high quality ablation in a range of materials with a 400 w sin...
HTR India - Products - Current Sense Resistors - Ceramic Encased Resistor - H...
HTR India - Products - Current Sense Resistors - Ceramic Encased Resistor - H...
Fluke Multimode OTDR for Troubleshooting and Extended Certification – 2
Fluke Multimode OTDR for Troubleshooting and Extended Certification – 2
M2 surgical laser 1470nm & 980nm for EVLT/PLDD/Proctology/Lipolysis
M2 surgical laser 1470nm & 980nm for EVLT/PLDD/Proctology/Lipolysis
More from Naku Technology Co,. Ltd
760nm 1500mW All-in-one Fiber Coupled Laser
It is a 760nm near infrared fiber coupled laser system. The laser power supply and laser output part are integrated in one chassis. There is a PC/M button on the back of the laser, the default is 'M' mode, that is, manual mode. 'PC' mode is software control mode, users can add this function. The Modulation interface on the back is used to connect 0~10KHz modulation signal. When there is no signal input, it is CW continuous working mode.
1550nm 10mW 1MHz Narrow Linewidth Fiber Laser
1550nm 1MHz narrow linewidth fiber laser is a high-precision, high-performance optical device. It uses optical fiber as the gain medium and generates a laser with a wavelength of 1550 nanometers through the excitation of rare earth elements. It has an extremely narrow linewidth (1MHz), thus ensuring high frequency stability and narrow bandwidth characteristics. This laser has important applications in spectral analysis, optical interference, fiber-optic communication and other fields, and can provide high-resolution and accurate measurement results. At the same time, its high beam quality is suitable for industrial fields such as precision machining and laser cutting. In short, the 1550nm 1MHz narrow linewidth fiber laser is a versatile, high-performance light source that can meet the needs of various precision measurements and industrial applications.
375nm 1-30mW UV Laser Coupled PM Fiber Output
This is a 375nm 30mW polarization-maintaining fiber-coupled laser. Its fiber is pluggable. When installing the fiber, pay attention to align the bayonet.
The laser output power is adjustable from 1 to 30mW. This laser supports CW continuous operation and TTL modulation operation modes, and is equipped with a modulation signal line. When Modulation is connected to an external signal, the laser automatically enters TTL modulation mode.
1550nm 3~200ns Pulse width Nanosecond Fiber Laser
The 1550nm 10kW pulsed nanosecond fiber laser is a shining star in modern industrial technology. Its high power output and precise nanosecond pulse control make it an ideal choice for material processing, scientific research experiments and other fields. With its unique fiber structure, this laser achieves high efficiency, long life and stability, bringing revolutionary changes to industrial production. In the future, it will continue to lead the new trend of laser technology and contribute to scientific and technological progress and industrial development.
980nm 500mW Single-mode TEM00 Semiconductor Laser
In today's laser technology field, the 980nm 500mW TEM00 semiconductor laser has become the focus of scientific researchers and technicians with its unique optical properties and wide application prospects. This laser provides strong technical support for research and applications in many fields with its high-precision and high-efficiency laser output.
C+L Band 26dBm 400mW Erbium-doped Fiber Amplifier
Erbium doped fiber amplifier (EDFA) is a high performance, small size of the fiber amplifier products. The internal use of stability high power semiconductor laser, the high stability of WDM, isolator, and high gain erbium-doped fiber. The product has the advantages of high reliability, high power output, high gain and low noise.
It is a C+L Band 26dBm EDFA Amplifier.The wavelength Range is 1528~1563nm & 1570~1603nm. The EDFA supports two working modes, ACC and APC, and the two working modes can be switched. In APC mode, the output power can be adjusted. In ACC mode, the operating current can be adjusted. Our desktop EDFA can be controlled by buttons. PC control software can be connected through RS232 serial port.
1550nm 10KW Peak Power Pulse Nanosecond Fiber Laser
What our laboratory introduces today is a 1550nm 10kW nanosecond pulse fiber laser.
First, let's take a look at the wavelength characteristics of the 1550nm nanosecond fiber laser. 1550nm is located in the infrared spectrum range and belongs to near-infrared light. Laser of this wavelength shows excellent transmission performance in optical communications, which can effectively reduce fiber loss and improve communication efficiency. At the same time, in the fields of medical treatment and material processing, the 1550nm laser has strong penetration and can achieve precise treatment of deep tissues and fine processing of high-hardness materials.
1550nm 200MHz Fiber Coupled Acousto-Optic Modulator
This is a 1550nm fiber-coupled acousto-optic modulator with a driver. The 1550nm acousto-optic modulator is an external modulation technology, and the acousto-optic device that controls the intensity of the laser beam is usually called an acousto-optic modulator. The 1550nm AOM has the advantages of high modulation extinction ratio and high power withstand, and is widely used in the field of optical fiber sensing.
395nm 2000mW UV Fiber Coupled Laser System
As can be seen from the video, this is a fiber optic coupling device, which is a multi-mode fiber and the fiber is pluggable. The coupling optical fiber can be customized. The one used here is 100μm, 2m in length, and the interface is FC/PC. There is a buckle on the interface. When installing the optical fiber, insert the optical fiber into the buckle and tighten it.
1550nm 37dBm 5W SM Fiber Laser Source Benchtop
The one shown in our laboratory today is a 1550nm infrared single-mode fiber coupled laser. This is a desktop laser, and the output power can be adjusted directly through the buttons on the panel. The output power is adjustable with an adjustment range of 0.5~5W. The adjustment accuracy is 1mW. The laser can also be controlled through software, and the communication interface is RS232.
1550nm 200MHz Fiber Coupled AO Modulator
This is a 1550nm 200MHz Fiber Coupled AOM with Driver. It is equipped with single-mode fiber, and polarization-maintaining fiber can also be customized. The radio frequency interface is SMA. We provide customized AOM service, different working wavelength and RF frequency can be customized. The rise/fall time of this modulator is 10ns. Let's check it now.
637nm 15W High Power Semiconductor Laser System
It is a 637nm 15W red laser system. The high-power laser generates a lot of heat when it works, and a heat sink is added at the bottom of the laser module. The radiator is equipped with 3 fans. When the laser is turned on, be careful not to cover the front and rear to avoid affecting the heat dissipation performance.
37dBm 5W High Power Er-doped Fiber Amplifier
High power erbium doped fiber amplifier (EYDFA-HP-BA), based on amplification technology of double clad erbium doped fiber, unique optical packaging technology, and with reliable hardware light path protection design, realized high power laser output in C band or L band, It has the advantages of high gain and low noise, and can be widely used in CATV, optical fiber communication, laser radar, etc..
2023 Latest High Power EDFA Fiber Amplifier.docx
This is a C-Band Erbium Doped Fiber Amplifier, high gain and low noise. It is the latest style of 2023, with a silver shell. The heat sink of the fiber amplifier is upward. This is Polarization-Maintaining Erbium-Doped Fiber Amplifier, SM Fiber EDFA can also be customized.
60W IR Invisible Laser 915nm Strong Laser
The power of 60W is very high power, which can instantly ignite the cardboard. Be sure to pay attention to safety when operating, the operator must wear laser protective glasses, and the laser cannot point to other people or other flammable objects.
2023 Newest! Touch Screen Laser System
532nm DPSS green laser is made features of good beam profile, ultra compact, long lifetime and easy operating, which is widely used in collimation, laser medical treatment, scientific experiment, optical instrument, laser display, etc.
1550nm Narrow Line-width DFB Laser PM1550 Fiber Output
The 1550nm band single-wavelength laser (low power) adopts high-stability semiconductor laser chip, polarization maintaining fiber output, professionally designed drive and temperature control circuit control to ensure the safe and stable operation of the laser, and can provide desktop or modular packaging.
C+L Band SM ASE Broadband Light Source
This is a benchtop ASE broadband light source with button control. This is the broadband light source of C+L Band, the wavelength range is 1528~1603nm. The power can be adjusted, and the adjustment accuracy is 1mW. The single-mode fiber is pluggable, and the interface is easily damaged. The fiber here is fixed and cannot be plugged.
37dBm 5W High Power YDFA SM Fiber Amplifier
It's a high power Ytterbium-doped optical amplifier, its output power is 37dBm. And high power YDFA built-in 3 cooling fans. The software control function can be customized, and the default is button control. The current working mode, current and output power are displayed on the front display.
https://www.civillaser.com/index.php?main_page=product_info&products_id=3049
40dBm YDFA High Power Yb-doped PM Fiber Amplifier Benchtop.doc
It's a high power polarization maintaining ytterbium-doped optical amplifier. Civil Laser's 10W high power YDFA include a 'Monitor' fiber. The software control function can be customized, and the default is button control. The working current or output power can be adjusted by the button.
It supports APC and ACC two working modes can be switched. In APC mode, the output power can be adjusted. In ACC mode, the working current can be adjusted.
More from Naku Technology Co,. Ltd (20)
1550nm 10KW Peak Power Pulse Nanosecond Fiber Laser
1550nm 10KW Peak Power Pulse Nanosecond Fiber Laser
1550nm 200MHz Fiber Coupled Acousto-Optic Modulator
1550nm 200MHz Fiber Coupled Acousto-Optic Modulator
1550nm Narrow Line-width DFB Laser PM1550 Fiber Output
1550nm Narrow Line-width DFB Laser PM1550 Fiber Output
40dBm YDFA High Power Yb-doped PM Fiber Amplifier Benchtop.doc
40dBm YDFA High Power Yb-doped PM Fiber Amplifier Benchtop.doc
Recently uploaded
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Project Management Semester Long Project - Acuity
Acuity is an innovative learning app designed to transform the way you engage with knowledge. Powered by AI technology, Acuity takes complex topics and distills them into concise, interactive summaries that are easy to read & understand. Whether you're exploring the depths of quantum mechanics or seeking insight into historical events, Acuity provides the key information you need without the burden of lengthy texts.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
OpenID AuthZEN Interop Read Out - Authorization
During Identiverse 2024 and EIC 2024, members of the OpenID AuthZEN WG got together and demoed their authorization endpoints conforming to the AuthZEN API
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Recently uploaded (20)
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
690nm Red SM Laser TEM00 Laser source.docx
- 1. 690nm Single-modeTEM00 Lab Laser System Today we're going to talk about a single-mode red laser -- 690nm 30mW TEM00 laser. Its output power can be adjusted from 0 to 30mW. The working voltage is AC 90~240V, supports wide range voltage. It support CW/Modulation two working modes. This is a single transverse film laser. Let's check it now. Youtube: https://youtu.be/nvBvKIt2KSo
- 2. [Specification] Product Name: 690nm semiconductor laser Lead Time: 1~3 weeks! Wavelength: 690±5 nm Output Power: 1~30mW Spectral Linewidth：<2nm Beam Diameter: Near 1*2.5 mm Beam Divergence Angle: Near 1 mrad Power Stability: <3% per 2hours Operating Temperature: 0°C~+40°C Storage Temperature: -40°C~+85°C Temperature Stabilizing: TEC Warm Up Time: <5 minutes MTTF(mean time to failure): 10,000 hrs Laser Dimension: Near 102(L)x35(W)x35(H)mm ower Supply: Adjustable Power Supply Modulation: 0~10KHz TTL Warranty：1 year The test data report of 690nm 30mW semiconductor laser: