This is 808nm 100mW infrared laser system coupled polarization-maintaining fiber. The working voltage is AC 90~240V and supports wide range voltage. Its laser power can be adjusted from 0~100mW, and it supports two working modes of CW/Modulation.
This is a 375nm 30mW polarization-maintaining fiber-coupled laser. Its fiber is pluggable. When installing the fiber, pay attention to align the bayonet.
The laser output power is adjustable from 1 to 30mW. This laser supports CW continuous operation and TTL modulation operation modes, and is equipped with a modulation signal line. When Modulation is connected to an external signal, the laser automatically enters TTL modulation mode.
In today's laser technology field, the 980nm 500mW TEM00 semiconductor laser has become the focus of scientific researchers and technicians with its unique optical properties and wide application prospects. This laser provides strong technical support for research and applications in many fields with its high-precision and high-efficiency laser output.
UV Curing System - Technodigm InnovationHung Nguyen
Technodigm UV equipment ranges from UV curing flood lamps, spot curing lamps to UV conveyors can be integrated into existing manufacturing assembly lines or used as stand-alone, bench-top curing systems and can be used with various kinds of UV adhesives and UV coatings.
SenseTek is de specialist op het gebied van bijzondere branddetectie. Waar de mogelijkheden van reguliere detectiesystemen ophouden, beginnen de mogelijkheden van onze systemen. SenseTek Fire & Security Solutions Amsterdam
The patented flame analysis technique adopting rich oxygen air-acetylene flame as the substitution for nitrous
oxide-acetylene flame for high temperature element analyses, such as Ca, Al, Ba, W, Mo, Ti, V, etc. Flame
temeperature is continuously adjustable between 2300-2950? which makes it possible to choose the best
atomization temperature for different elements.
This is a 375nm 30mW polarization-maintaining fiber-coupled laser. Its fiber is pluggable. When installing the fiber, pay attention to align the bayonet.
The laser output power is adjustable from 1 to 30mW. This laser supports CW continuous operation and TTL modulation operation modes, and is equipped with a modulation signal line. When Modulation is connected to an external signal, the laser automatically enters TTL modulation mode.
In today's laser technology field, the 980nm 500mW TEM00 semiconductor laser has become the focus of scientific researchers and technicians with its unique optical properties and wide application prospects. This laser provides strong technical support for research and applications in many fields with its high-precision and high-efficiency laser output.
UV Curing System - Technodigm InnovationHung Nguyen
Technodigm UV equipment ranges from UV curing flood lamps, spot curing lamps to UV conveyors can be integrated into existing manufacturing assembly lines or used as stand-alone, bench-top curing systems and can be used with various kinds of UV adhesives and UV coatings.
SenseTek is de specialist op het gebied van bijzondere branddetectie. Waar de mogelijkheden van reguliere detectiesystemen ophouden, beginnen de mogelijkheden van onze systemen. SenseTek Fire & Security Solutions Amsterdam
The patented flame analysis technique adopting rich oxygen air-acetylene flame as the substitution for nitrous
oxide-acetylene flame for high temperature element analyses, such as Ca, Al, Ba, W, Mo, Ti, V, etc. Flame
temeperature is continuously adjustable between 2300-2950? which makes it possible to choose the best
atomization temperature for different elements.
This is a 690nm 30mW red laser system. Its output power can be adjusted from 0 to 30mW. The working voltage is AC 90~240V, supports wide range voltage. It support CW/Modulation two working modes. This is a single transverse film laser. Let's check it now.
What our laboratory introduces today is a 1550nm 10kW nanosecond pulse fiber laser.
First, let's take a look at the wavelength characteristics of the 1550nm nanosecond fiber laser. 1550nm is located in the infrared spectrum range and belongs to near-infrared light. Laser of this wavelength shows excellent transmission performance in optical communications, which can effectively reduce fiber loss and improve communication efficiency. At the same time, in the fields of medical treatment and material processing, the 1550nm laser has strong penetration and can achieve precise treatment of deep tissues and fine processing of high-hardness materials.
It is a 520nm 10W fiber coupled laser system. There is a radiator at the bottom of the laser head. The radiator is composed of an aluminum sheet and a cooling fan. The 'CW|TTL|Analog' on the back of the laser power supply is the selection button for 3 working modes. The 'Adjustor' knob is used to adjust the size of the current to control the laser output power. Let's check it now.
1470nm 100mW 200mW 300mW 500mW 1000mW Infrared Laser Diode Modules
Multimode IR laser diode made 1470nm infrared laser diode modules enables wide range output power of 100mW to 1000mW, integrating well with metal heat sink, glass coated lens and APC, ACC driving circuit board. Cooperating with night version device and external electric power source, it makes sure of high efficient infrared laser light conversion, and provides users the most reliable and precise infrared dot aligning source for prominent colleges, labs and institutes.
High power range 1470nm infrared laser diode modules make good use of import 1470nm MM laser diodes inside durable and ultra compact designed tubes, allowing convenient installation, easy operation, and low production cost and quick response infrared dot projection. After easy screw of adjustable focus optic lens and proper mounting onto night version device, 1470nm IR dot laser assures qualified infrared laser source emission and increasing accuracy infrared dot alignment in distance.
Key features:
● Wide output power range of 100mW to 1000mW ensures powerful and intense infrared laser light emission, and generates highly clear infrared reference dot projection extending long distance of 100 to 1000 meters.
● Import 1470nm MM laser diode assures 40% improvement of laser beam stability.
● Up to 24 hours aging preventing and beam stability assures good laser light cycling use, and highly reliable infrared laser dot alignment by professionals or skills.
● AC/DC adapter with 5V, 9V power source supports 1470nm infrared laser diode modules with constant infrared laser beam emission, stable infrared dot emission, and no affect by overheating and over current.
● APC, ACC driving circuit ensures constant output power supply, no tube burning out or damage, and long operating lifetime.
● CW and pulsing laser selectable
Applications:
infrared dot measurement
laser communication
spectrum analysis
scientific experiment etc
Technical data:
Item Infrared Laser Diode Module
Wavelength (nm) 1470nm
Output power (mW) 100mW 200mW 300mW 500mW 1000mW
Laser Class IIIb, IV
Beam divergence (mrad) 6mrad
Beam mode (before optics) TE
Focus adjustable? Yes
TTL Modulation No
Operating voltage(v) DC=5V, 9V
Operating current (mA) I<1000mA;
Operating temperature(℃) 10℃~45℃
Storage temperature(℃) -10℃~50℃
Dimension D16mm×L71mm;D26mm×L150mm
Expected lifetime (hours) 8000 hours
Warranty Period 180 days
Packing list: 1 ea 1470nm infrared laser diode module and 1 ea AC/DC adapter
Note: The operation of high power 1470nm infrared laser diode modules generate invisible infrared laser beam, and bring users potential thermal energy hurt to human eyes. Please avoid any eye exposure to beam aperture. Do remember to wear correct laser safety goggles and glasses so as to achieve easy and safe infrared dot alignment constantly.
Link source:
https://www.berlinlasers.com/1470nm-100mw-200mw-300mw-400mw-500mw-1000mw-infrared-laser-diode-modules
ETA uv oven is cost-effective drying Oven produced by ETA, mainly to deal with the application of Adhesive(glue, uv photosensitive, inks,Epoxy resin adhesive etc). then followed by injection-type or print multiple materials in an instant surface cured and dried.
For More SMT Equipments Plz Contact at etasmt@foxmail.com or eta@eta-ele.com (Shanny)
WebSite: www.smt11.com
ETA uv oven is cost-effective drying Oven produced by ETA, mainly to deal with the application of Adhesive(glue,uv
photosensitive, inks,Epoxy resin adhesive etc). then followed by injection-type or print multiple materials in an instant
surface cured and dried.
We are Manufacturer and Exporter of REAL A Grade Solar Panels in China . Prices are BEST and quality is APPROVED ! Please contact me for your inquiries... ( haldansumer@gmail.com )
Atomic absorption spectrophotometer comes with Deuterium lamp for background correction, RS232 interface, Multi-linear and nonlinear curve fitting.
Its double beam system automatically compensates the light source drift and wavelength drift caused by the variation of temperature and electronic
circuit drift so as to reach a good basic line stability.
1550nm 1MHz narrow linewidth fiber laser is a high-precision, high-performance optical device. It uses optical fiber as the gain medium and generates a laser with a wavelength of 1550 nanometers through the excitation of rare earth elements. It has an extremely narrow linewidth (1MHz), thus ensuring high frequency stability and narrow bandwidth characteristics. This laser has important applications in spectral analysis, optical interference, fiber-optic communication and other fields, and can provide high-resolution and accurate measurement results. At the same time, its high beam quality is suitable for industrial fields such as precision machining and laser cutting. In short, the 1550nm 1MHz narrow linewidth fiber laser is a versatile, high-performance light source that can meet the needs of various precision measurements and industrial applications.
The 1550nm 10kW pulsed nanosecond fiber laser is a shining star in modern industrial technology. Its high power output and precise nanosecond pulse control make it an ideal choice for material processing, scientific research experiments and other fields. With its unique fiber structure, this laser achieves high efficiency, long life and stability, bringing revolutionary changes to industrial production. In the future, it will continue to lead the new trend of laser technology and contribute to scientific and technological progress and industrial development.
More Related Content
Similar to 808nm 100mW IR Laser System PM Fiber Output
This is a 690nm 30mW red laser system. Its output power can be adjusted from 0 to 30mW. The working voltage is AC 90~240V, supports wide range voltage. It support CW/Modulation two working modes. This is a single transverse film laser. Let's check it now.
What our laboratory introduces today is a 1550nm 10kW nanosecond pulse fiber laser.
First, let's take a look at the wavelength characteristics of the 1550nm nanosecond fiber laser. 1550nm is located in the infrared spectrum range and belongs to near-infrared light. Laser of this wavelength shows excellent transmission performance in optical communications, which can effectively reduce fiber loss and improve communication efficiency. At the same time, in the fields of medical treatment and material processing, the 1550nm laser has strong penetration and can achieve precise treatment of deep tissues and fine processing of high-hardness materials.
It is a 520nm 10W fiber coupled laser system. There is a radiator at the bottom of the laser head. The radiator is composed of an aluminum sheet and a cooling fan. The 'CW|TTL|Analog' on the back of the laser power supply is the selection button for 3 working modes. The 'Adjustor' knob is used to adjust the size of the current to control the laser output power. Let's check it now.
1470nm 100mW 200mW 300mW 500mW 1000mW Infrared Laser Diode Modules
Multimode IR laser diode made 1470nm infrared laser diode modules enables wide range output power of 100mW to 1000mW, integrating well with metal heat sink, glass coated lens and APC, ACC driving circuit board. Cooperating with night version device and external electric power source, it makes sure of high efficient infrared laser light conversion, and provides users the most reliable and precise infrared dot aligning source for prominent colleges, labs and institutes.
High power range 1470nm infrared laser diode modules make good use of import 1470nm MM laser diodes inside durable and ultra compact designed tubes, allowing convenient installation, easy operation, and low production cost and quick response infrared dot projection. After easy screw of adjustable focus optic lens and proper mounting onto night version device, 1470nm IR dot laser assures qualified infrared laser source emission and increasing accuracy infrared dot alignment in distance.
Key features:
● Wide output power range of 100mW to 1000mW ensures powerful and intense infrared laser light emission, and generates highly clear infrared reference dot projection extending long distance of 100 to 1000 meters.
● Import 1470nm MM laser diode assures 40% improvement of laser beam stability.
● Up to 24 hours aging preventing and beam stability assures good laser light cycling use, and highly reliable infrared laser dot alignment by professionals or skills.
● AC/DC adapter with 5V, 9V power source supports 1470nm infrared laser diode modules with constant infrared laser beam emission, stable infrared dot emission, and no affect by overheating and over current.
● APC, ACC driving circuit ensures constant output power supply, no tube burning out or damage, and long operating lifetime.
● CW and pulsing laser selectable
Applications:
infrared dot measurement
laser communication
spectrum analysis
scientific experiment etc
Technical data:
Item Infrared Laser Diode Module
Wavelength (nm) 1470nm
Output power (mW) 100mW 200mW 300mW 500mW 1000mW
Laser Class IIIb, IV
Beam divergence (mrad) 6mrad
Beam mode (before optics) TE
Focus adjustable? Yes
TTL Modulation No
Operating voltage(v) DC=5V, 9V
Operating current (mA) I<1000mA;
Operating temperature(℃) 10℃~45℃
Storage temperature(℃) -10℃~50℃
Dimension D16mm×L71mm;D26mm×L150mm
Expected lifetime (hours) 8000 hours
Warranty Period 180 days
Packing list: 1 ea 1470nm infrared laser diode module and 1 ea AC/DC adapter
Note: The operation of high power 1470nm infrared laser diode modules generate invisible infrared laser beam, and bring users potential thermal energy hurt to human eyes. Please avoid any eye exposure to beam aperture. Do remember to wear correct laser safety goggles and glasses so as to achieve easy and safe infrared dot alignment constantly.
Link source:
https://www.berlinlasers.com/1470nm-100mw-200mw-300mw-400mw-500mw-1000mw-infrared-laser-diode-modules
ETA uv oven is cost-effective drying Oven produced by ETA, mainly to deal with the application of Adhesive(glue, uv photosensitive, inks,Epoxy resin adhesive etc). then followed by injection-type or print multiple materials in an instant surface cured and dried.
For More SMT Equipments Plz Contact at etasmt@foxmail.com or eta@eta-ele.com (Shanny)
WebSite: www.smt11.com
ETA uv oven is cost-effective drying Oven produced by ETA, mainly to deal with the application of Adhesive(glue,uv
photosensitive, inks,Epoxy resin adhesive etc). then followed by injection-type or print multiple materials in an instant
surface cured and dried.
We are Manufacturer and Exporter of REAL A Grade Solar Panels in China . Prices are BEST and quality is APPROVED ! Please contact me for your inquiries... ( haldansumer@gmail.com )
Atomic absorption spectrophotometer comes with Deuterium lamp for background correction, RS232 interface, Multi-linear and nonlinear curve fitting.
Its double beam system automatically compensates the light source drift and wavelength drift caused by the variation of temperature and electronic
circuit drift so as to reach a good basic line stability.
1550nm 1MHz narrow linewidth fiber laser is a high-precision, high-performance optical device. It uses optical fiber as the gain medium and generates a laser with a wavelength of 1550 nanometers through the excitation of rare earth elements. It has an extremely narrow linewidth (1MHz), thus ensuring high frequency stability and narrow bandwidth characteristics. This laser has important applications in spectral analysis, optical interference, fiber-optic communication and other fields, and can provide high-resolution and accurate measurement results. At the same time, its high beam quality is suitable for industrial fields such as precision machining and laser cutting. In short, the 1550nm 1MHz narrow linewidth fiber laser is a versatile, high-performance light source that can meet the needs of various precision measurements and industrial applications.
The 1550nm 10kW pulsed nanosecond fiber laser is a shining star in modern industrial technology. Its high power output and precise nanosecond pulse control make it an ideal choice for material processing, scientific research experiments and other fields. With its unique fiber structure, this laser achieves high efficiency, long life and stability, bringing revolutionary changes to industrial production. In the future, it will continue to lead the new trend of laser technology and contribute to scientific and technological progress and industrial development.
Erbium doped fiber amplifier (EDFA) is a high performance, small size of the fiber amplifier products. The internal use of stability high power semiconductor laser, the high stability of WDM, isolator, and high gain erbium-doped fiber. The product has the advantages of high reliability, high power output, high gain and low noise.
It is a C+L Band 26dBm EDFA Amplifier.The wavelength Range is 1528~1563nm & 1570~1603nm. The EDFA supports two working modes, ACC and APC, and the two working modes can be switched. In APC mode, the output power can be adjusted. In ACC mode, the operating current can be adjusted. Our desktop EDFA can be controlled by buttons. PC control software can be connected through RS232 serial port.
This is a 1550nm fiber-coupled acousto-optic modulator with a driver. The 1550nm acousto-optic modulator is an external modulation technology, and the acousto-optic device that controls the intensity of the laser beam is usually called an acousto-optic modulator. The 1550nm AOM has the advantages of high modulation extinction ratio and high power withstand, and is widely used in the field of optical fiber sensing.
As can be seen from the video, this is a fiber optic coupling device, which is a multi-mode fiber and the fiber is pluggable. The coupling optical fiber can be customized. The one used here is 100μm, 2m in length, and the interface is FC/PC. There is a buckle on the interface. When installing the optical fiber, insert the optical fiber into the buckle and tighten it.
The one shown in our laboratory today is a 1550nm infrared single-mode fiber coupled laser. This is a desktop laser, and the output power can be adjusted directly through the buttons on the panel. The output power is adjustable with an adjustment range of 0.5~5W. The adjustment accuracy is 1mW. The laser can also be controlled through software, and the communication interface is RS232.
This is a 1550nm 200MHz Fiber Coupled AOM with Driver. It is equipped with single-mode fiber, and polarization-maintaining fiber can also be customized. The radio frequency interface is SMA. We provide customized AOM service, different working wavelength and RF frequency can be customized. The rise/fall time of this modulator is 10ns. Let's check it now.
It is a 637nm 15W red laser system. The high-power laser generates a lot of heat when it works, and a heat sink is added at the bottom of the laser module. The radiator is equipped with 3 fans. When the laser is turned on, be careful not to cover the front and rear to avoid affecting the heat dissipation performance.
High power erbium doped fiber amplifier (EYDFA-HP-BA), based on amplification technology of double clad erbium doped fiber, unique optical packaging technology, and with reliable hardware light path protection design, realized high power laser output in C band or L band, It has the advantages of high gain and low noise, and can be widely used in CATV, optical fiber communication, laser radar, etc..
This is a C-Band Erbium Doped Fiber Amplifier, high gain and low noise. It is the latest style of 2023, with a silver shell. The heat sink of the fiber amplifier is upward. This is Polarization-Maintaining Erbium-Doped Fiber Amplifier, SM Fiber EDFA can also be customized.
The power of 60W is very high power, which can instantly ignite the cardboard. Be sure to pay attention to safety when operating, the operator must wear laser protective glasses, and the laser cannot point to other people or other flammable objects.
532nm DPSS green laser is made features of good beam profile, ultra compact, long lifetime and easy operating, which is widely used in collimation, laser medical treatment, scientific experiment, optical instrument, laser display, etc.
The 1550nm band single-wavelength laser (low power) adopts high-stability semiconductor laser chip, polarization maintaining fiber output, professionally designed drive and temperature control circuit control to ensure the safe and stable operation of the laser, and can provide desktop or modular packaging.
This is a benchtop ASE broadband light source with button control. This is the broadband light source of C+L Band, the wavelength range is 1528~1603nm. The power can be adjusted, and the adjustment accuracy is 1mW. The single-mode fiber is pluggable, and the interface is easily damaged. The fiber here is fixed and cannot be plugged.
It's a high power Ytterbium-doped optical amplifier, its output power is 37dBm. And high power YDFA built-in 3 cooling fans. The software control function can be customized, and the default is button control. The current working mode, current and output power are displayed on the front display.
https://www.civillaser.com/index.php?main_page=product_info&products_id=3049
It's a high power polarization maintaining ytterbium-doped optical amplifier. Civil Laser's 10W high power YDFA include a 'Monitor' fiber. The software control function can be customized, and the default is button control. The working current or output power can be adjusted by the button.
It supports APC and ACC two working modes can be switched. In APC mode, the output power can be adjusted. In ACC mode, the working current can be adjusted.
This is 520nm high power green fiber laser system. This laser adds software control. Use RS232-USB to connect the laser and computer software.The laser output power can be adjusted by software. Using EasyHost software, you can also write your own programs to control the lower computer according to the communication protocol.
The output power is 22W is a high-power laser, we added a heat sink under the laser module. The heat sink is composed of aluminum sheets and 3 cooling fans. Its fiber is pluggable, here we choose a 1000μm fiber. Let's check it now.
This is a 1650nm infrared laser. The laser power supply and the laser output part are integrated in one chassis.
1650nm is an infrared invisible laser, we need to use an infrared sensitive film to observe the light spot.
Today we are talking about software-controlled laser source. It is 450nm Blue fiber coupled laser source controlled by software. EasyHost is the control software. The connection between the laser and PC software adopts the communication protocol of RS232. The laser supports two working modes: CW/Modulation. When switching to Modulation, an external signal input is required. This is a fiber-coupled laser, and a free-space output laser can also be customized.
For high-power lasers, please wear green light protective glasses before operating. The laser cannot be directed at people, and even if the reflected light hits the human eye, it may cause permanent damage. The 532nm DPSS laser needs a warm-up time of about 1 to 3 minutes, and the max power is reached after 1 minute of startup at normal temperature.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024
808nm 100mW IR Laser System PM Fiber Output
1. 808nm 100mW Infrared Laser System PM
Optical Fiber Output
808nm fiber-coupled laser uses PM fiber coupling, which has the advantages of high coupling
efficiency and good output laser beam quality. The TEC temperature control system is used to
ensure that the laser is more stable and has better performance. Compact structure, strong and
reliable, suitable for various industrial and scientific research applications.
Youtube: https://youtu.be/ipauD2H1KK8
This is 808nm 100mW infrared laser system coupled polarization-maintaining fiber. The working
voltage is AC 90~240V and supports wide range voltage. Its laser power can be adjusted from
0~100mW, and it supports two working modes of CW/Modulation.
808nm is infrared laser, invisible laser, here use infrared sensitive film to observe the spot.
2. The test report of 808nm 100mW IR PM fiber coupled laser system.