Horngren’s Cost Accounting A Managerial Emphasis, Canadian 9th edition soluti...
4.how to solve the problem of shaking outdoor ceiling fan and light
1. How to solve the problem of shaking outdoor ceiling
fan and light
Ceiling fan lights can not only illuminate, but the fan part can
also play a role in cooling down in summer. Although ceiling
fan lights are more popular, there is a problem that cannot be
ignored in the process of using ceiling fan lights, which is the
shaking of ceiling fan lights. Then, what are the ways to deal
with the shaking of ceiling fan lights? Today we will take you
to understand.
一.Check the installation
If the ceiling fan light is not installed properly when it is
installed, it is very likely to cause the ceiling fan light to shake,
and the degree of shaking will be more severe. At this time, we
can check whether the hanging ball on the ceiling fan lamp
hanger rod is locked with the hanger that is locked on the top,
whether the switch cover of the lamp is locked, and whether
the screws of each part are loose.
2. 二. Scale adjustment
When the angles of the fan blades are not parallel, the overall
force of the ceiling fan lamp is uneven, which causes the ceiling
fan lamp to shake. At this time, we need to adjust the high fan
blades to be as low as the other fan blades, and adjust the low
fan blades to the same height as the other fan blades. The
specific adjustment steps are as follows.
3. 1. Align one end of the scale with the ceiling vertically, and
place the other end at the end of the fan blade, and
record the distance from the fan blade to the ceiling.
2. Carefully rotate the fan blades of the ceiling fan light,
check the distance between each fan blade and the ceiling,
and then adjust the distance between all the fan blades
and the ceiling to the same height.
4. 三.Blade exchange
By adjusting the blades to ensure the balance of the ceiling fan
lights, there are mainly the following methods.
1. Equivalent adjustment method.Measure whether the
distance between every two fan blades is equal. If the
distance between every two fan blades is not equal, the
whole ceiling fan light will have the phenomenon of
gravity imbalance. At this time, we can remove the
blades with unequal distances with tools, and then
readjust the position.
2. Exchange adjustment.Ensure the balance of the ceiling
fan lights by exchanging the positions of the fan blades.
Generally, diagonal fan blades or adjacent fan blades are
interchanged to ensure the balance of ceiling fan lights.
3. Adjust the balance weight.First of all, we need to find the
balance point through the balance block. Add the balance
weight to the fan blade of the ceiling fan lamp, turn on
the ceiling fan lamp, and observe whether the ceiling fan
lamp continues to shake. If it continues to shake, replace
with another fan blade until you find the fan blade that
the ceiling fan lamp no longer shakes.
5. About Bbier
Shenzhen Bbier Lighting Co., ltd, Professional Commercial
LED Lighting Supplier. It was founded in 2008 LED
6. luminaires manufacturing organization (Factory), Our factory
has ISO9001: 2008 standard and leader in manufaturing all
series of innovative energy saving projects LED luminaires for
United States wholesale distributor (Importer) and solution
company of lighting. Mainly product categories: UFO LED
High Bay Lights, LED Grow Lights, LED Post Top
Lights, Solar Post Top Lights, LED Shoebox Lights, LED
Stadium Lights, LED Street Lights, Solar Street Lights, LED
Gas Station Lights, LED Corn Light Bulbs, LED Flood
Lights, Temporary Work Lights, Explosion Proof LED
Lights, LED Canopy Lights, LED Classroom Lights, LED
Emergency Lights, LED Exit Signs, LED Office Lights, LED T8
Tubes, Linear LED High Bay Lights, LED Dock Lights, LED
Garden Lights, LED Industrial Lights, LED Retrofit Kits, LED
Wall Pack Lights, Portable LED Work Lights, Rechargeable
LED Work Lights, Solar Flood Lights, Solar Lawn Lights,Solar
LED Garden Lights, Solar LED Yard Lights,etc. We have 10
Years of LED Lights Development Experience, 50 LED lights
patents, 200 LED Lights Certifications, all LED products have
5 Years Warranty and ETL DCL Listed... View More