Pre-configuration guide and specs for Thor Broadcast's 4 Channel SDI-ATSC-IPLL Encoder Modulator. For more info on the product: https://thorbroadcast.com/product/1-4-sdi-to-atsc-modulators-and-iptv-streaming-encoders.html

1. H-4SDI-ATSC-IPLL Pre-configuration Guide
NMS configuration IP Address is 192.168.0.136
User Name: admin
Password: admin
INPUT1 / INPUT2
MP MPEG2 Encoding Format (MPEG2/H.264)
MP Audio encoding type : AC3/MPEG2 / AC3 pass
MP Video Encoding Bit rate 1-19.5Mbps
MP Latency setting –Normal- 800ns, Mode2 - 500ms, Mode1 - 200ms
FRF RF Channels selection A or B or C or D
Fre Setting ABCD frequency is in Modulator
S section
Sub-Channel Number
MP →

2. Modulator Setting:
CH1 RF Frequency -57Mhz - CATV Channel #2
CH2 RF Frequency -63Mhz - CATV Channel #3
CH3 RF Frequency -69Mhz - CATV Channel #4
CH4 RF Frequency -79Mhz - CATV Channel #5
FRF RF Channels selection A B C D
Fre Setting ABCD channels frequency
MP →
MP →
FRF RF Output Power Attenuation
-10 =35dBmV
-20 =25dBmv
-30 = 15dBmv

3. IP OUTPUT: (DATA RJ45 ETHERNET PORT)
SPTS 1 224.2.2.2 port # 2234
SPTS 2 224.2.2.2 port # 2236
SPTS 3 224.2.2.2 port # 2238
SPTS 3 224.2.2.2 port # 2240
MPTS 1 224.2.2.2 port # 2242 OFF
Data Port IP 192.168.2.137
Data port IP has to be on the different subnet than NMS IP
Technical Support (800)-521-8467 Ext 2 https://thorbroadcast.com/ , http://thormodulators.com/
If you have configuration questions, please call us and have prepared Teamviewer software for remote
login https://www.teamviewer.com
If you make any changes, please Apply and Save the configuration in Save/Restore tab
MP →