A presentation given by Mark Billinghurst on September 23rd 2015 at the Sydney AR meet up. It describes how the VR space in 2016 will be different from that in 1996, and directions for future work to help grow the business.
NUX Presentation from TechMixer Birmingham 2011Michael Heydt
Variant of the NUX deck given at this specific events. Covers concepts in natural user interfaces. Project and some contact info not valid as of 2016, but still some good concepts in there for those learning.
Lecture on Mobile AR as part of the 2017 COMP 4010 course on AR and VR taught at the University of South Australia. Lecture taught on October 19th 2017 by Gun Lee. Slides prepared by Mark Billinghurst.
A presentation given by Mark Billinghurst on September 23rd 2015 at the Sydney AR meet up. It describes how the VR space in 2016 will be different from that in 1996, and directions for future work to help grow the business.
NUX Presentation from TechMixer Birmingham 2011Michael Heydt
Variant of the NUX deck given at this specific events. Covers concepts in natural user interfaces. Project and some contact info not valid as of 2016, but still some good concepts in there for those learning.
Lecture on Mobile AR as part of the 2017 COMP 4010 course on AR and VR taught at the University of South Australia. Lecture taught on October 19th 2017 by Gun Lee. Slides prepared by Mark Billinghurst.
A very brief and informative power point presentation on the Sixth Sense Technology which provides you all the basic and enhances future scopes of technology in real world.
Ken Lee (vangogh imaging) 3D and Depth Sensing Solutions on Wearable AR Platf...AugmentedWorldExpo
Achieving the best possible mixed reality performance on mobile platforms, such as head mounted displays, requires careful selection and optimization of three distinct elements; the depth sensor, computer vision software, and the processor. There are numerous characteristics and operating parameters associated with each element. Depth sensors and processors must provide high performance while not consuming too much power. Computer vision software needs to work in dynamically changing environments. A detailed examination of all the various characteristics of each key element will ensure the best possible mixed reality experience.
Augmented World Expo (AWE) is back for its seventh year in our largest conference and expo featuring technologies giving us superpowers: augmented reality (AR), virtual reality (VR) and wearable tech. Join over 4,000 attendees from all over the world including a mix of CEOs, CTOs, designers, developers, creative agencies, futurists, analysts, investors, and top press in a fantastic opportunity to learn, inspire, partner, and experience first hand the most exciting industry of our times. See more at http://AugmentedWorldExpo.com
Ambient Intelligence: Definitions and Application AreasFulvio Corno
Topics:
- Definition(s)
- Application areas
- Requested features
- Architectures
Slides for the course of "Ambient Intelligence: Technology and Design" given at Politecnico di Torino during year 2013/2014.
Course website: http://bit.ly/polito-ami
This presentation was presented at the IGeLU conference in Oxford, UK. It introduces the audience into the EU funded research project DURAARK and gives an insight for the first archieved goals and next steps concerning the preservation of three dimensional architectural data.
Lecture 1 from a course on Mobile Based Augmented Reality Development taught by Mark Billinghurst and Zi Siang See on November 29th and 30th 2015 at Johor Bahru in Malaysia. This lecture is the Introduction to the course. Look for the other 9 lectures in the course.
#FiaComit - MobiCloud Showcase & Construction App ChallengeComit Projects Ltd
COMIT / Fiatech Conference 2014, The Crystal, London
Efficiency Through Digital Projects
Martin Wilson from Appear. MobiCloud is an international project supported by the European Union to develop a cloud-based mobile application platform. The CEO of lead partner Appear Networks gave a brief overview of
the project and the construction app challenge it has launched.
The slides from the MobiCloud Showcase event that was held in the evening are available separately.
This presentation is part of www.orangekeychain.com.
It's a summarized explanation of why 3D-printing could be used for meeting a demand for a world-wide high-volume low-tech consumer product.
3D-printings place in society – a practical approachRobert Vissers
3D-printing is changing the world as we know it. This claim is quite big.We will examine the claim and see to what extend it’s already happening. Taking a closer look at the impact on economy, ecology, society in general. Based on concrete and practical facts we can find a clear timeframe for the events.
A very brief and informative power point presentation on the Sixth Sense Technology which provides you all the basic and enhances future scopes of technology in real world.
Ken Lee (vangogh imaging) 3D and Depth Sensing Solutions on Wearable AR Platf...AugmentedWorldExpo
Achieving the best possible mixed reality performance on mobile platforms, such as head mounted displays, requires careful selection and optimization of three distinct elements; the depth sensor, computer vision software, and the processor. There are numerous characteristics and operating parameters associated with each element. Depth sensors and processors must provide high performance while not consuming too much power. Computer vision software needs to work in dynamically changing environments. A detailed examination of all the various characteristics of each key element will ensure the best possible mixed reality experience.
Augmented World Expo (AWE) is back for its seventh year in our largest conference and expo featuring technologies giving us superpowers: augmented reality (AR), virtual reality (VR) and wearable tech. Join over 4,000 attendees from all over the world including a mix of CEOs, CTOs, designers, developers, creative agencies, futurists, analysts, investors, and top press in a fantastic opportunity to learn, inspire, partner, and experience first hand the most exciting industry of our times. See more at http://AugmentedWorldExpo.com
Ambient Intelligence: Definitions and Application AreasFulvio Corno
Topics:
- Definition(s)
- Application areas
- Requested features
- Architectures
Slides for the course of "Ambient Intelligence: Technology and Design" given at Politecnico di Torino during year 2013/2014.
Course website: http://bit.ly/polito-ami
This presentation was presented at the IGeLU conference in Oxford, UK. It introduces the audience into the EU funded research project DURAARK and gives an insight for the first archieved goals and next steps concerning the preservation of three dimensional architectural data.
Lecture 1 from a course on Mobile Based Augmented Reality Development taught by Mark Billinghurst and Zi Siang See on November 29th and 30th 2015 at Johor Bahru in Malaysia. This lecture is the Introduction to the course. Look for the other 9 lectures in the course.
#FiaComit - MobiCloud Showcase & Construction App ChallengeComit Projects Ltd
COMIT / Fiatech Conference 2014, The Crystal, London
Efficiency Through Digital Projects
Martin Wilson from Appear. MobiCloud is an international project supported by the European Union to develop a cloud-based mobile application platform. The CEO of lead partner Appear Networks gave a brief overview of
the project and the construction app challenge it has launched.
The slides from the MobiCloud Showcase event that was held in the evening are available separately.
This presentation is part of www.orangekeychain.com.
It's a summarized explanation of why 3D-printing could be used for meeting a demand for a world-wide high-volume low-tech consumer product.
3D-printings place in society – a practical approachRobert Vissers
3D-printing is changing the world as we know it. This claim is quite big.We will examine the claim and see to what extend it’s already happening. Taking a closer look at the impact on economy, ecology, society in general. Based on concrete and practical facts we can find a clear timeframe for the events.
“Niente da più soddisfazione che usare
della cose che hai progettato e creato da solo.”
R.M.Pirsig
Da “Lo Zen e l’Arte della Manutenzione della motocicletta”
Quella magnifica sensazione quando crei qualcosa di tuo … La conosciamo tutti!
La creazione, la progettazione e la produzione hanno in sé qualcosa di assolutamente personale, quasi magico; è possibile trasmettere i tuoi valori attraverso l’oggetto che crei.
Questo libro spiega la stampa in 3D in modo che tu possa cominciare da solo, a partire da oggi; non c’è bisogno che tu abbia una stampante 3D.
Cominceremo dalle basi. Tutti gli strumenti sono disponibili o comunque facili da reperire. Puoi cominciare ora, direttamente da casa tua, seguendo la guida e iniziando a stampare ciò che vuoi..
E’ semplice.
"Everyone is talking about 3D printing lately. Nobody knows exactly how it works, how it starts and how it ends.
This book by Robert is an ideal tour around the 3D printing world. It is a useful reference book for anyone who wants to get some hands-on-experience in 3D printing.
Follow Robert and discover that 3D printing is the future. Please – mind the developments. They go faster than you think."
Beginnen met 3D-printen, als je geen 3D-printer hebt.
Er zijn veel ontwikkelingen gaande, maar de concrete toepassing blijft nog achter. Het doel van dit boekje is het 3D-printen dichterbij de consument te brengen. (de kloof dichten)
Het eerste Nederlandstalige boek is nu beschikbaar op bol.com over het concreet beginnen met 3D-printen.
Titel: Ik 3D-print!
Subtitel: Beginnen met 3D printen, als je geen 3D-printer hebt.
Omvang: 60 pagina's, 240x170mm,
Verkoopprijs: 16,90 euro
Beschikbaar: www.bol.com/nl/p/ik-print-3d/9200000018286351/
Doel: 3D-printen dichterbij de consument te brengen.
Doelgroep: Iedereen die geen 3D-printer heeft en wil weten wat het is.
Veel plezier met het ontdekken van de wereld van 3D-printen; welkom aan boord.
Can AI do good? at 'offtheCanvas' India HCI preludeAlan Dix
Invited talk at 'offtheCanvas' IndiaHCI prelude, 29th June 2024.
https://www.alandix.com/academic/talks/offtheCanvas-IndiaHCI2024/
The world is being changed fundamentally by AI and we are constantly faced with newspaper headlines about its harmful effects. However, there is also the potential to both ameliorate theses harms and use the new abilities of AI to transform society for the good. Can you make the difference?
White wonder, Work developed by Eva TschoppMansi Shah
White Wonder by Eva Tschopp
A tale about our culture around the use of fertilizers and pesticides visiting small farms around Ahmedabad in Matar and Shilaj.
Book Formatting: Quality Control Checks for DesignersConfidence Ago
This presentation was made to help designers who work in publishing houses or format books for printing ensure quality.
Quality control is vital to every industry. This is why every department in a company need create a method they use in ensuring quality. This, perhaps, will not only improve the quality of products and bring errors to the barest minimum, but take it to a near perfect finish.
It is beyond a moot point that a good book will somewhat be judged by its cover, but the content of the book remains king. No matter how beautiful the cover, if the quality of writing or presentation is off, that will be a reason for readers not to come back to the book or recommend it.
So, this presentation points designers to some important things that may be missed by an editor that they could eventually discover and call the attention of the editor.
Between Filth and Fortune- Urban Cattle Foraging Realities by Devi S Nair, An...Mansi Shah
This study examines cattle rearing in urban and rural settings, focusing on milk production and consumption. By exploring a case in Ahmedabad, it highlights the challenges and processes in dairy farming across different environments, emphasising the need for sustainable practices and the essential role of milk in daily consumption.
Transforming Brand Perception and Boosting Profitabilityaaryangarg12
In today's digital era, the dynamics of brand perception, consumer behavior, and profitability have been profoundly reshaped by the synergy of branding, social media, and website design. This research paper investigates the transformative power of these elements in influencing how individuals perceive brands and products and how this transformation can be harnessed to drive sales and profitability for businesses.
Through an exploration of brand psychology and consumer behavior, this study sheds light on the intricate ways in which effective branding strategies, strategic social media engagement, and user-centric website design contribute to altering consumers' perceptions. We delve into the principles that underlie successful brand transformations, examining how visual identity, messaging, and storytelling can captivate and resonate with target audiences.
Methodologically, this research employs a comprehensive approach, combining qualitative and quantitative analyses. Real-world case studies illustrate the impact of branding, social media campaigns, and website redesigns on consumer perception, sales figures, and profitability. We assess the various metrics, including brand awareness, customer engagement, conversion rates, and revenue growth, to measure the effectiveness of these strategies.
The results underscore the pivotal role of cohesive branding, social media influence, and website usability in shaping positive brand perceptions, influencing consumer decisions, and ultimately bolstering sales and profitability. This paper provides actionable insights and strategic recommendations for businesses seeking to leverage branding, social media, and website design as potent tools to enhance their market position and financial success.
Expert Accessory Dwelling Unit (ADU) Drafting ServicesResDraft
Whether you’re looking to create a guest house, a rental unit, or a private retreat, our experienced team will design a space that complements your existing home and maximizes your investment. We provide personalized, comprehensive expert accessory dwelling unit (ADU)drafting solutions tailored to your needs, ensuring a seamless process from concept to completion.
2. Contents:
1. Introduction 3DHubs
2. News
3. Media
4. Speaker:
Mr. Van der Kampen / solid modeling
5. Upcoming Events
6. Networking-time
www.3dhubs.com/eindhoven
3. 1. Introduction 3D-Hubs
…worldwide network of available 3D-printers….
…connect printer owners to anyone who wants to have something printed…
1. Introduction 3D-Hubs
…worldwide network of available 3D-printers….
…connect printer owners to anyone who wants to have something printed…
4. 1. Introduction 3D-Hubs
…worldwide network of available 3D-printers….
…connect printer owners to anyone who wants to have something printed…
In short:
1. Imagine something,
2. Google it,
3. Go to 3D-Hubs.com
4. Find someone in YOUR area to print
(..scan..design..)
And have it delivered to you! (fast!)
5. 2. News
10.000+ printers available
Filament - samples
3D-Hubs @ RapidPro (2-3 volunteers on 3-4-5 March)
- stand
- speaker (Filemon)
Mail: Eindhoven@3dhubs.com
www.3dhubs.com/eindhoven
22. 5. Upcoming events
27 January 3D Printing Materials Conference - 27 January 2015, Maastricht
28 January 3D Biopinting Conference, Maastricht
3-5 March RapidPro
4-5 March Additive World Conference III
More events will be in the Newsletter:
> Register @ www.3dhubs.com
www.3dhubs.com/eindhoven
23. 6. Networking time!
See you at 19th of February, location Eindhoven
www.3dhubs.com/eindhoven