This document provides the results of an analysis of anchors connecting a steel beam to cracked concrete. Four anchors were analyzed with a diameter of 20mm. The analysis found:
1) The maximum tension and shear forces in each anchor are below the anchor's tensile and shear capacities.
2) Displacements under short and long term loading are within acceptable limits.
3) All design criteria are satisfied and the fastening system is adequate for the given loads.
The document provides a price list for fasteners produced by Deepak Fasteners Ltd (DFL), including socket head cap screws, nuts, bolts, and other products. DFL reserves the right to change prices and specifications without notice. The company warrants that its products will meet industry standards and be free of defects in materials and workmanship.
TR is a fastening technology company established in 1973 that is publicly quoted on the London Stock Exchange. It has over 1100 employees worldwide and 30 locations globally. TR manufactures self-clinch fasteners in Europe and Asia and has an established network of European distributors. The document discusses TR's criteria for selecting master distributors and provides details about its manufacturing operations. It also provides background information on TR's annual sales, establishment date, and position as one of the largest manufacturers and distributors of self-clinch products worldwide.
1. The document provides information on plating, packing, pricing, warranties, and remedies for Unbrako products.
2. Plating is typically black thermal finish with oil, and no guarantees are provided for products plated by others. Packing is standard, with extra charges for small orders. Prices are subject to change and exclude taxes/duties.
3. Unbrako warrants products will conform to standards and be free of defects. Their sole remedy is to repair or replace defective products not subject to misuse. Unbrako makes no representations about patent infringement.
The document is a technical handbook published by Holo-Krome as a guide to dimensional, mechanical and application data for their socket screw products. It provides important limitations and notes that the data is subject to change. It is intended as a general guide and should be used in conjunction with specific design criteria and engineering principles. The handbook contains both inch and metric data organized to make finding information easy regardless of module used.
This document summarizes GPM, a manufacturing company located in Dongguan, China. It has two main business segments: machinery (GPM) and measuring equipment (GOODVISION). The company was established in 2004 and has since expanded to include multiple production facilities. GPM provides mechanical, plastic, and stamped parts through CNC machining, lathing, welding, and surface treatment services. It aims to offer a one-stop solution through capabilities such as casting, machining, stamping, and assembly. Quality is ensured through calibration-controlled inspection devices and certification to ISO standards.
Specialty Bar Products Company is a machine shop located in Greenville, SC that serves industries such as power generation, oil and gas, aviation, transportation, and marine. They have many CNC machines and provide services including turning, milling, drilling, grinding, EDM, sawing, and heat treating. They produce parts from materials like Inconel for customers including GE Energy and Siemens from pump shafts to turbine bolts. Quality control and non-destructive testing are performed on all parts before packaging and shipping.
This document provides a price list for metric hex head bolts and screws as well as inch hex head bolts and screws. It lists specifications, threading, material properties, notes on ordering, and plating information. For each diameter and length, it provides the part number, box quantity, and price per 100 pieces. A wide range of bolt sizes from M4 to M48 and 1/4 to 1 inch are included with varying lengths and prices.
The document provides a price list for fasteners produced by Deepak Fasteners Ltd (DFL), including socket head cap screws, nuts, bolts, and other products. DFL reserves the right to change prices and specifications without notice. The company warrants that its products will meet industry standards and be free of defects in materials and workmanship.
TR is a fastening technology company established in 1973 that is publicly quoted on the London Stock Exchange. It has over 1100 employees worldwide and 30 locations globally. TR manufactures self-clinch fasteners in Europe and Asia and has an established network of European distributors. The document discusses TR's criteria for selecting master distributors and provides details about its manufacturing operations. It also provides background information on TR's annual sales, establishment date, and position as one of the largest manufacturers and distributors of self-clinch products worldwide.
1. The document provides information on plating, packing, pricing, warranties, and remedies for Unbrako products.
2. Plating is typically black thermal finish with oil, and no guarantees are provided for products plated by others. Packing is standard, with extra charges for small orders. Prices are subject to change and exclude taxes/duties.
3. Unbrako warrants products will conform to standards and be free of defects. Their sole remedy is to repair or replace defective products not subject to misuse. Unbrako makes no representations about patent infringement.
The document is a technical handbook published by Holo-Krome as a guide to dimensional, mechanical and application data for their socket screw products. It provides important limitations and notes that the data is subject to change. It is intended as a general guide and should be used in conjunction with specific design criteria and engineering principles. The handbook contains both inch and metric data organized to make finding information easy regardless of module used.
This document summarizes GPM, a manufacturing company located in Dongguan, China. It has two main business segments: machinery (GPM) and measuring equipment (GOODVISION). The company was established in 2004 and has since expanded to include multiple production facilities. GPM provides mechanical, plastic, and stamped parts through CNC machining, lathing, welding, and surface treatment services. It aims to offer a one-stop solution through capabilities such as casting, machining, stamping, and assembly. Quality is ensured through calibration-controlled inspection devices and certification to ISO standards.
Specialty Bar Products Company is a machine shop located in Greenville, SC that serves industries such as power generation, oil and gas, aviation, transportation, and marine. They have many CNC machines and provide services including turning, milling, drilling, grinding, EDM, sawing, and heat treating. They produce parts from materials like Inconel for customers including GE Energy and Siemens from pump shafts to turbine bolts. Quality control and non-destructive testing are performed on all parts before packaging and shipping.
This document provides a price list for metric hex head bolts and screws as well as inch hex head bolts and screws. It lists specifications, threading, material properties, notes on ordering, and plating information. For each diameter and length, it provides the part number, box quantity, and price per 100 pieces. A wide range of bolt sizes from M4 to M48 and 1/4 to 1 inch are included with varying lengths and prices.
Zhang jiagang HaiLi Machinery CO., Ltd is an equipment manufacturing company established in 2002 located in Zhangjiagang City, China. The company has over 10,000 square meters of factory space and over 150 employees including 36 certified welders. They have a variety of machinery including large platforms, cranes, cutting, welding, coating, and testing equipment allowing them to manufacture large steel structures and components for industries such as power, oil and gas, and marine. Their quality control procedures and certifications allow them to serve domestic and international customers.
Punzones para punzonadora, Pass Stanztechnick A, catalogo de formas especialesGrupo Idemet SA de CV
Catálogo de ejemplos de punzonado de formas especiales de Pass Stanztechnick AG, se incluyen más de 60 ejemplos de deformaciones posibles en punzonadoras CNC
BV206 Parts Catalog | EX Army Vehicles Hagglunds Undercarriage Parts rubtrack...Cathryn Han
BV206 Replacement Rubber Track & Undercarriage Parts Supplier.
Supply the most complete BV206 Parts.
The products we offer include: rubber tracks (aggressive type, lightweight type), drive sprocket system, road wheel system, tensioning system and more; in fact, any part that is hard to find, you can find here! We’re your one-stop shop parts supplier.
Flexovit lanseeraa uuden napalaikan Mega-Line MaXX Cutin, jonka käyttöikä on 4 – 8 kertaa pidempi kuin perinteisten napalaikkojen ja valmistajan mukaan se myös hioo huomattavasti nopeammin.
Founded in 2006, EX Mould has extensive experience in plastic injection mold development and manufacturing. They have over 100 precision machining and testing equipment and an annual production capacity of 500 molds. EX Mould focuses on technology development, personnel training, and helping customers achieve competitiveness through high quality, quick response times, and sincere service.
FIBRO (GERMANY) OILLESS PARTS CATALOGUEVIVEK KUMAR
1. The document provides material data and specifications for oilless guide elements made of bronze alloy with embedded solid lubricants.
2. The elements have properties including high load capacity at low speeds, low friction, and wide temperature resistance from -300°C to +300°C.
3. The lubricant deposits are arranged in patterns to ensure optimal lubrication along the sliding motion, especially for counter bearings that are hardened and ground.
Walle produce all series of hydraulic seals,according to category by purpose,including rotary seals, all kinds of O ring(FKM O ring), step seal, glyd ring, oil seal and various of combination seals, gasket, spring energised seals, food machinery seals and so on.
Founded in 2007, Swaraj group is an emerging automotive and home appliances components manufacturer with 2 best in class manufacturing facilities, Swaraj group is on an exponential growth trajectory clocking a annual sale of INR 18Cr in the financial year 2016-17. The company is a leading spring form supplier
This document provides information on various industrial cutting tool storage and transport products from Huot Manufacturing, including ToolScoots, SuperScoots, wall mounts, dispensers, and accessories. It describes the products' features and benefits for efficiently storing and organizing cutting tools. Product numbers and short descriptions are provided throughout for identifying and ordering the different storage solutions.
Walle produce all series of hydraulic seals,according to category by purpose,including rotary seals, all kinds of O ring(FKM O ring), step seal, glyd ring, oil seal and various of combination seals, gasket, spring energised seals, food machinery seals and so on.
Walle produce all series of hydraulic seals,according to category by purpose,including rotary seals, all kinds of O ring(FKM O ring), step seal, glyd ring, oil seal and various of combination seals, gasket, spring energised seals, food machinery seals and so on.
An experienced capital markets professional seeks an exigent position to exercise 6+ years of experience in financial industries and a track record of increasing revenue through market knowledge, analytical ability, and strong client relationships. He has expertise in key sectors including financial, retail, and consumer products and maintains an above average client retention rate of 80%. He is skilled in business analytics, data management, business intelligence, performance management, and data integration to deliver value-based programs and help organizations achieve goals.
The document provides an overview of technical market indicators, classifying them into four main groups: trend indicators, breadth indicators, contrarian indicators, and oscillators. It discusses trend indicators in more detail, defining them as indicators that measure the main direction of the underlying security or market. Trend indicators have the advantage of being stronger than other indicators since markets trend most of the time, allowing trend-following strategies to be profitable. However, trend indicators also have the complication of being lagging rather than leading indicators that only confirm trends after they have occurred.
Formula for calculate no. of cement bag by atishatishji
The document presents a simple formula called "multiply divide multiply" to calculate the number of cement bags (50 kg each) needed for concrete of a given grade. For a column measuring 10x2x2 feet using M20 grade concrete, the formula is: 1) multiply the dimensions to get the volume in cubic feet, 2) divide the volume by the sum of the grade ratios to get bags, 3) multiply bags by 1.25 to account for the volume of each bag. This would require 9 bags of cement.
Annual business plan hr template : play this in slide show modeVipul Saxena
This is the Template which can be used for presenting Annual Business Plan for HR Deptt.
I have been using it and customise it as per needs of the organisation. Covers almost all aspects/challenges of HR Deptts
Understand Human Resource Planning (HRP) and purpose of HRP.
Identify the relationship between strategy and HRP.
Identify the steps of HR planning process.
Describe the approaches to understand the jobs.
Discuss the phases of job analysis, including what it is and how it’s used.
Design model for forecasting HR requirements and employee requisition form.
Develop job descriptions , including summaries and job functions, using the Internet and traditional methods by using Job analysis questionnaire.
Develop job specifications using the Internet as well as your judgment.
Explain job analysis in a “jobless” world, including what it means and how it’s done in practice.
This document provides information on the Sensortronics Model 92001 single-point alloy steel load cell, including its specifications, features, applications, description, dimensions, wiring details, and disclaimer. The load cell has a capacity range of 50-1500kg, is made of alloy steel or stainless steel, and is designed for direct mounting in large platform scales. It provides high accuracy for use in counting, bench, and floor scales.
This document provides specifications for metal pipe clamps and accessories made by BIS. It includes details on materials, coatings, certifications, applications, and specifications for different clamp and accessory sizes. Performance characteristics include corrosion resistance up to 1000 hours in salt spray testing, noise insulation according to DIN 4109, and fire safety certification starting at M10 sizes. Technical data and specifications are provided for each product, including dimensions, material, load ratings, and other details.
Ding Tong Precision Metal Co. Ltd is a precision metal stamping and injection molding company established in 2003 in Dongguan, China. It has over 300 employees working across two plants with a total investment of $10 million. The company provides services such as stamping die production, injection molding, and spare parts fabrication. It works with customers in automotive, electronics, and other industries. Ding Tong aims to expand its production capabilities and improve quality to meet global customer demand.
The document describes the design of a single point cutting tool for machining medium carbon steel. It involves selecting carbide material for the tool, determining optimal tool angles using a design data book, and calculating forces, power requirements, tool dimensions, and deflection. The design is for a cutting velocity of 400 m/min, feed of 0.5 mm/rev, and depth of cut of 0.5mm. Calculations show the designed tool can withstand the calculated cutting forces of 257.6 N for tangential force and will have minimal deflection of 3.96 microns, confirming its suitability for the intended machining operation.
Zhang jiagang HaiLi Machinery CO., Ltd is an equipment manufacturing company established in 2002 located in Zhangjiagang City, China. The company has over 10,000 square meters of factory space and over 150 employees including 36 certified welders. They have a variety of machinery including large platforms, cranes, cutting, welding, coating, and testing equipment allowing them to manufacture large steel structures and components for industries such as power, oil and gas, and marine. Their quality control procedures and certifications allow them to serve domestic and international customers.
Punzones para punzonadora, Pass Stanztechnick A, catalogo de formas especialesGrupo Idemet SA de CV
Catálogo de ejemplos de punzonado de formas especiales de Pass Stanztechnick AG, se incluyen más de 60 ejemplos de deformaciones posibles en punzonadoras CNC
BV206 Parts Catalog | EX Army Vehicles Hagglunds Undercarriage Parts rubtrack...Cathryn Han
BV206 Replacement Rubber Track & Undercarriage Parts Supplier.
Supply the most complete BV206 Parts.
The products we offer include: rubber tracks (aggressive type, lightweight type), drive sprocket system, road wheel system, tensioning system and more; in fact, any part that is hard to find, you can find here! We’re your one-stop shop parts supplier.
Flexovit lanseeraa uuden napalaikan Mega-Line MaXX Cutin, jonka käyttöikä on 4 – 8 kertaa pidempi kuin perinteisten napalaikkojen ja valmistajan mukaan se myös hioo huomattavasti nopeammin.
Founded in 2006, EX Mould has extensive experience in plastic injection mold development and manufacturing. They have over 100 precision machining and testing equipment and an annual production capacity of 500 molds. EX Mould focuses on technology development, personnel training, and helping customers achieve competitiveness through high quality, quick response times, and sincere service.
FIBRO (GERMANY) OILLESS PARTS CATALOGUEVIVEK KUMAR
1. The document provides material data and specifications for oilless guide elements made of bronze alloy with embedded solid lubricants.
2. The elements have properties including high load capacity at low speeds, low friction, and wide temperature resistance from -300°C to +300°C.
3. The lubricant deposits are arranged in patterns to ensure optimal lubrication along the sliding motion, especially for counter bearings that are hardened and ground.
Walle produce all series of hydraulic seals,according to category by purpose,including rotary seals, all kinds of O ring(FKM O ring), step seal, glyd ring, oil seal and various of combination seals, gasket, spring energised seals, food machinery seals and so on.
Founded in 2007, Swaraj group is an emerging automotive and home appliances components manufacturer with 2 best in class manufacturing facilities, Swaraj group is on an exponential growth trajectory clocking a annual sale of INR 18Cr in the financial year 2016-17. The company is a leading spring form supplier
This document provides information on various industrial cutting tool storage and transport products from Huot Manufacturing, including ToolScoots, SuperScoots, wall mounts, dispensers, and accessories. It describes the products' features and benefits for efficiently storing and organizing cutting tools. Product numbers and short descriptions are provided throughout for identifying and ordering the different storage solutions.
Walle produce all series of hydraulic seals,according to category by purpose,including rotary seals, all kinds of O ring(FKM O ring), step seal, glyd ring, oil seal and various of combination seals, gasket, spring energised seals, food machinery seals and so on.
Walle produce all series of hydraulic seals,according to category by purpose,including rotary seals, all kinds of O ring(FKM O ring), step seal, glyd ring, oil seal and various of combination seals, gasket, spring energised seals, food machinery seals and so on.
An experienced capital markets professional seeks an exigent position to exercise 6+ years of experience in financial industries and a track record of increasing revenue through market knowledge, analytical ability, and strong client relationships. He has expertise in key sectors including financial, retail, and consumer products and maintains an above average client retention rate of 80%. He is skilled in business analytics, data management, business intelligence, performance management, and data integration to deliver value-based programs and help organizations achieve goals.
The document provides an overview of technical market indicators, classifying them into four main groups: trend indicators, breadth indicators, contrarian indicators, and oscillators. It discusses trend indicators in more detail, defining them as indicators that measure the main direction of the underlying security or market. Trend indicators have the advantage of being stronger than other indicators since markets trend most of the time, allowing trend-following strategies to be profitable. However, trend indicators also have the complication of being lagging rather than leading indicators that only confirm trends after they have occurred.
Formula for calculate no. of cement bag by atishatishji
The document presents a simple formula called "multiply divide multiply" to calculate the number of cement bags (50 kg each) needed for concrete of a given grade. For a column measuring 10x2x2 feet using M20 grade concrete, the formula is: 1) multiply the dimensions to get the volume in cubic feet, 2) divide the volume by the sum of the grade ratios to get bags, 3) multiply bags by 1.25 to account for the volume of each bag. This would require 9 bags of cement.
Annual business plan hr template : play this in slide show modeVipul Saxena
This is the Template which can be used for presenting Annual Business Plan for HR Deptt.
I have been using it and customise it as per needs of the organisation. Covers almost all aspects/challenges of HR Deptts
Understand Human Resource Planning (HRP) and purpose of HRP.
Identify the relationship between strategy and HRP.
Identify the steps of HR planning process.
Describe the approaches to understand the jobs.
Discuss the phases of job analysis, including what it is and how it’s used.
Design model for forecasting HR requirements and employee requisition form.
Develop job descriptions , including summaries and job functions, using the Internet and traditional methods by using Job analysis questionnaire.
Develop job specifications using the Internet as well as your judgment.
Explain job analysis in a “jobless” world, including what it means and how it’s done in practice.
This document provides information on the Sensortronics Model 92001 single-point alloy steel load cell, including its specifications, features, applications, description, dimensions, wiring details, and disclaimer. The load cell has a capacity range of 50-1500kg, is made of alloy steel or stainless steel, and is designed for direct mounting in large platform scales. It provides high accuracy for use in counting, bench, and floor scales.
This document provides specifications for metal pipe clamps and accessories made by BIS. It includes details on materials, coatings, certifications, applications, and specifications for different clamp and accessory sizes. Performance characteristics include corrosion resistance up to 1000 hours in salt spray testing, noise insulation according to DIN 4109, and fire safety certification starting at M10 sizes. Technical data and specifications are provided for each product, including dimensions, material, load ratings, and other details.
Ding Tong Precision Metal Co. Ltd is a precision metal stamping and injection molding company established in 2003 in Dongguan, China. It has over 300 employees working across two plants with a total investment of $10 million. The company provides services such as stamping die production, injection molding, and spare parts fabrication. It works with customers in automotive, electronics, and other industries. Ding Tong aims to expand its production capabilities and improve quality to meet global customer demand.
The document describes the design of a single point cutting tool for machining medium carbon steel. It involves selecting carbide material for the tool, determining optimal tool angles using a design data book, and calculating forces, power requirements, tool dimensions, and deflection. The design is for a cutting velocity of 400 m/min, feed of 0.5 mm/rev, and depth of cut of 0.5mm. Calculations show the designed tool can withstand the calculated cutting forces of 257.6 N for tangential force and will have minimal deflection of 3.96 microns, confirming its suitability for the intended machining operation.
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
IRJET- Design and Analysis of Progressive Die for Industrial Component Ta...IRJET Journal
The document describes the design and analysis of a progressive die for an industrial tailgate striker component. Key points:
- A progressive die was designed and modeled in CATIA to perform multiple operations like piercing and blanking on a sheet metal part in a single stroke, improving production rates.
- Finite element analysis was conducted on the die model using ANSYS to analyze stresses and deformation on the sheet metal during the stamping process.
- The die design was optimized based on the material properties and dimensions of the sheet metal and required operations to maximize production efficiency while minimizing costs.
Walle produce all series of hydraulic seals,according to category by purpose,including rotary seals, all kinds of O ring(FKM O ring), step seal, glyd ring, oil seal and various of combination seals, gasket, spring energised seals, food machinery seals and so on.
Volvo ec460 c ld ec460cld excavator service repair manualjfkseksmemqw
This document provides instructions for removing and installing a boom cylinder protecting guard on an excavator. It includes the following key details:
1. The guard weighs approximately 80 kg and should be handled carefully due to its weight.
2. To remove the guard, raise the boom cylinders, secure the guard with a hoist, and remove screws from the guard and clamps.
3. To install the guard, mark the positions of clamps on the boom cylinders, install clamps and screws with loctite, secure the guard with a hoist and install screws, and check for interference when operating the cylinders.
The document provides information about the Model SSB single-ended load beam from Revere. It has stainless steel construction, is hermetically sealed and certified. It is available in various capacities from 0.5 to 10 tons. It has features like fully welded construction, IP66 and IP68 sealing, and optional ATEX and FM approvals. The load cell is suitable for platform, belt, pallet, overhead and other weighing applications. Dimensional drawings and specifications are provided.
The document describes the Model KSR single-column compression load cell. It has capacities ranging from 6 to 280 tons, is IP66 sealed, and is suitable for high capacity platform scales, vessel weighing, silos, and process weighing. Key specifications of the load cell are provided such as accuracy, rated output, temperature performance, safe overload limits, and dimensions for various capacity models.
Site & Laboratory Use Non Destructive Testing
• Instrument For Fast & Accurate Measurement of
Concrete Cover
• Provides Rebar Location
• Automatic Rebar Sizing
• Cover Measurement
IRJET- Design Analysis of Exhaust Muffler with VOC Emission FilterIRJET Journal
This document describes the design and analysis of an exhaust muffler with a VOC emission filter. It aims to reduce noise pollution and control air pollution from internal combustion engines.
The muffler design includes two chambers - a resonating chamber to reduce noise and a VOC emission filter chamber to remove volatile organic compounds from exhaust gases using bamboo charcoal. Finite element analysis was performed using ANSYS software to validate the muffler design. Analysis of casing pipe and resonator membrane components showed von mises stresses and deformations within allowable limits, indicating the muffler design is safe and suitable for manufacturing. Experimental testing achieved a minimum noise level of 88 dB(A) at no load and maximum engine speed, demonstrating noise reduction performance.
The document describes the Low Profile Compression Disk model LCD, which is designed for applications requiring low height for safety reasons. It can withstand side forces. The LCD comes in various standard capacities between 5k and 100k lbs. It is constructed of alloy steel and potted to be moisture and humidity resistant. Dimensional specifications and technical specifications are provided, including accuracy classes, outputs, temperature ranges, overloads, and construction materials.
Original PNP Transistor A1020-Y A1020 1020 2SA1020 TO-92 New ON semiconductorAUTHELECTRONIC
This document provides information on the 2SA1020 PNP transistor, including its maximum ratings, electrical characteristics, and packaging details. The 2SA1020 is a one watt, high current PNP transistor in a TO-92 package. It has a continuous collector current rating of 2 amps and can dissipate up to 1.5 watts at a case temperature of 25°C. The document provides tables of its key electrical parameters and graphs of characteristics like current gain and safe operating area.
VEM Tooling (Shenzhen) Co., Ltd. is a tooling company founded in 1998 that specializes in plastic injection molds. It has grown significantly over the years, establishing sales offices around the world and factories in China and Thailand with over 200 employees. The company provides high precision molds and has a rigorous project management process to ensure quality and on-time delivery. It works with customers in medical, automotive, electronics and other industries.
new SDR plastic mould company presentation-2016Jailyn VKE
SDR Mold Technology is a 10-year-old Chinese company that specializes in plastic injection molds and molded parts. It has over 150 employees and a 40,000 square foot facility. The company aims to work closely with customers, meet tight deadlines, and provide high quality and cost-effective solutions for automotive, medical, and industrial parts. SDR has a proven track record, serving customers in various industries around the world.
This document provides information on powder handling solutions from Palamatic Process, including flow connecting, vibration, fluidization, and mechanical solutions. It discusses flexible fittings, pneumatic and electric vibrators, fluidization nozzles, anti-bridging devices, and specialized coatings. Technical specifications, dimensions, and applications are provided for different types of vibrators, nozzles, and fittings. The document aims to facilitate powder flow within silos, hoppers, and other containers.
This document provides information on various powder handling solutions from Palamatic Process, including:
1) Flexible fittings that allow for sealed connections between pipe sections without tools.
2) Various types of vibrators that use mechanical or pneumatic methods to prevent clogging and improve flow, such as ball, roller, and turbine vibrators.
3) Fluidization solutions like nozzles, aeration pads, and air cannons that use air to fluidize powders for improved flow.
4) Additional mechanical solutions and specific coatings to facilitate powder flow and handling.
The document provides technical details on each type of solution and their applications in powder processing and material handling.
Chapter wise All Notes of First year Basic Civil Engineering.pptxDenish Jangid
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) CurriculumMJDuyan
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
Communicating effectively and consistently with students can help them feel at ease during their learning experience and provide the instructor with a communication trail to track the course's progress. This workshop will take you through constructing an engaging course container to facilitate effective communication.
How to Make a Field Mandatory in Odoo 17Celine George
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
Temple of Asclepius in Thrace. Excavation resultsKrassimira Luka
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.
Main Java[All of the Base Concepts}.docxadhitya5119
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
1. www.hilti.in Profis Anchor 2.4.5
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
COWI
|
Page:
Project:
Sub-Project I Pos. No.:
Date:
1
RADISEVEJ 11
BEAMS 150x330x15x15
21-12-2013
Specifier's comments:
1 Input data
Anchor type and diameter: HIT-HY 200 + Rebar 20mm
Effective embedment depth: hef,act = 120 mm (hef,limit = - mm)
Material: BSt 500 S
Evaluation Service Report: ETA 12/0084
Issued I Valid: 08-08-2012 | 23-12-2016
Proof: design method ETAG BOND (EOTA TR 029)
Stand-off installation: eb = 0 mm (no stand-off); t = 4 mm
Anchor plate: lx x ly x t = 400 mm x 200 mm x 4 mm; (Recommended plate thickness: not calculated)
Profile: I profile; (L x W x T x FT) = 330 mm x 150 mm x 15 mm x 15 mm
Base material: cracked concrete, C30/37, fcc = 37.00 N/mm2
; h = 250 mm, Temp. short/long: 40/24 °C
Installation: hammer drilled hole, installation condition: dry
Reinforcement: no reinforcement or reinforcement spacing >= 150 mm (any Ø) or >= 100 mm (Ø <= 10 mm)
no longitudinal edge reinforcement
Reinforcement to control splitting according to EOTA TR 029, 5.2.2.6 present.
Geometry [mm] & Loading [kN, kNm]
2. www.hilti.in Profis Anchor 2.4.5
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
COWI
|
Page:
Project:
Sub-Project I Pos. No.:
Date:
2
RADISEVEJ 11
BEAMS 150x330x15x15
21-12-2013
2 Load case/Resulting anchor forces
Load case: Design loads
Anchor reactions [kN]
Tension force: (+Tension, -Compression)
Anchor Tension force Shear force Shear force x Shear force y
1 0.000 22.500 0.000 22.500
2 0.000 22.500 0.000 22.500
3 0.000 22.500 0.000 22.500
4 0.000 22.500 0.000 22.500
max. concrete compressive strain: - [‰]
max. concrete compressive stress: - [N/mm2
]
resulting tension force in (x/y)=(0/0): 0.000 [kN]
resulting compression force in (x/y)=(0/0): 0.000 [kN]
1 2
3 4
x
y
3 Tension load (EOTA TR 029, Section 5.2.2)
Load [kN] Capacity [kN] Utilization bbbbN [%] Status
Steel Strength* N/A N/A N/A N/A
Combined pullout-concrete cone failure** N/A N/A N/A N/A
Concrete Breakout Strength** N/A N/A N/A N/A
Splitting failure** N/A N/A N/A N/A
* anchor having the highest loading **anchor group (anchors in tension)
3. www.hilti.in Profis Anchor 2.4.5
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
COWI
|
Page:
Project:
Sub-Project I Pos. No.:
Date:
3
RADISEVEJ 11
BEAMS 150x330x15x15
21-12-2013
4 Shear load (EOTA TR 029, Section 5.2.3)
Load [kN] Capacity [kN] Utilization bbbbV [%] Status
Steel Strength (without lever arm)* 22.500 57.333 40 OK
Steel failure (with lever arm)* N/A N/A N/A N/A
Pryout Strength** 90.000 139.463 65 OK
Concrete edge failure in direction ** N/A N/A N/A N/A
* anchor having the highest loading **anchor group (relevant anchors)
4.1 Steel Strength (without lever arm)
VRk,s [kN] gM,s VRd,s [kN] VSd [kN]
86.000 1.500 57.333 22.500
4.2 Pryout Strength (Bond Strength controls)
Ap,N [mm2
] A0
p,N [mm2
] tRk,ucr,25 [N/mm2
] ccr,Np [mm] scr,Np [mm] cmin [mm]
244800 129600 12.00 180 360 ∞
yc tRk,cr [N/mm2
] k k-factor y
0
g,Np yg,Np
1.000 7.00 2.300 2.000 1.127 1.049
ys,Np ec1,V [mm] yec1,Np ec2,V [mm] yec2,Np yre,Np
1.000 0 1.000 0 1.000 1.000
N0
Rk,p [kN] NRk,p [kN] gM,c,p VRd,c1 [kN] VSd [kN]
52.779 104.597 1.500 139.463 90.000
5 Displacements (highest loaded anchor)
Short term loading:
NSk = 0.000 [kN] dN = 0.000 [mm]
VSk = 16.667 [kN] dV = 0.667 [mm]
dNV = 0.667 [mm]
Long term loading:
NSk = 0.000 [kN] dN = 0.000 [mm]
VSk = 16.667 [kN] dV = 0.833 [mm]
dNV = 0.833 [mm]
Comments: Tension displacements are valid with half of the required installation torque moment for uncracked concrete! Shear displacements
are valid without friction between the concrete and the anchor plate! The gap due to the drilled hole and clearance hole tolerances are not
included in this calculation!
The acceptable anchor displacements depend on the fastened construction and must be defined by the designer!
6 Warnings
• To avoid failure of the anchor plate the required thickness can be calculated in PROFIS Anchor. Load re-distributions on the anchors due to
elastic deformations of the anchor plate are not considered. The anchor plate is assumed to be sufficiently stiff, in order not to be deformed
when subjected to the loading!
• Checking the transfer of loads into the base material is required in accordance with EOTA TR 029, Section 7!
• The design is only valid if the clearance hole in the fixture is not larger than the value given in Table 4.1 of EOTA TR029! For larger
diameters of the clearance hole see Chapter 1.1. of EOTA TR029!
• The accessory list in this report is for the information of the user only. In any case, the instructions for use provided with the product have to
be followed to ensure a proper installation.
• Bore hole cleaning must be performed according to instructions for use (blow twice with oil-free compressed air (min. 6 bar), brush twice,
blow twice with oil-free compressed air (min. 6 bar)).
• Characteristic bond resistances depend on short- and long-term temperatures.
• Edge reinforcement is not required to avoid splitting failure
Fastening meets the design criteria!
4. www.hilti.in Profis Anchor 2.4.5
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
COWI
|
Page:
Project:
Sub-Project I Pos. No.:
Date:
4
RADISEVEJ 11
BEAMS 150x330x15x15
21-12-2013
Coordinates Anchor [mm]
Anchor x y c-x c+x c-y c+y
1 -75 -60 - - - -
2 75 -60 - - - -
3 -75 60 - - - -
4 75 60 - - - -
7 Installation data
Anchor plate, steel: - Anchor type and diameter: HIT-HY 200 + Rebar, 20mm
Profile: I profile; 330 x 150 x 15 x 15 mm Installation torque: 0.000 kNm
Hole diameter in the fixture: df = 20 mm Hole diameter in the base material: 25 mm
Plate thickness (input): 4 mm Hole depth in the base material: 120 mm
Recommended plate thickness: not calculated Minimum thickness of the base material: 170 mm
Cleaning: Premium cleaning of the drilled hole is required
7.1 Required accessories
Drilling Cleaning Setting
• Suitable Rotary Hammer
• Properly sized drill bit
• Compressed air with required
accessories to blow from the bottom of
the hole
• Proper diameter wire brush
• Dispenser including cassette and mixer
• For deep installations, a piston plug is
necessary
• Torque wrench
1 2
3 4
125 150 125
4012040
y
200 200
100100
5. www.hilti.in Profis Anchor 2.4.5
Input data and results must be checked for agreement with the existing conditions and for plausibility!
PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
Company:
Specifier:
Address:
Phone I Fax:
E-Mail:
COWI
|
Page:
Project:
Sub-Project I Pos. No.:
Date:
5
RADISEVEJ 11
BEAMS 150x330x15x15
21-12-2013
8 Remarks; Your Cooperation Duties
• Any and all information and data contained in the Software concern solely the use of Hilti products and are based on the principles, formulas
and security regulations in accordance with Hilti's technical directions and operating, mounting and assembly instructions, etc., that must be
strictly complied with by the user. All figures contained therein are average figures, and therefore use-specific tests are to be conducted
prior to using the relevant Hilti product. The results of the calculations carried out by means of the Software are based essentially on the
data you put in. Therefore, you bear the sole responsibility for the absence of errors, the completeness and the relevance of the data to be
put in by you. Moreover, you bear sole responsibility for having the results of the calculation checked and cleared by an expert, particularly
with regard to compliance with applicable norms and permits, prior to using them for your specific facility. The Software serves only as an
aid to interpret norms and permits without any guarantee as to the absence of errors, the correctness and the relevance of the results or
suitability for a specific application.
• You must take all necessary and reasonable steps to prevent or limit damage caused by the Software. In particular, you must arrange for
the regular backup of programs and data and, if applicable, carry out the updates of the Software offered by Hilti on a regular basis. If you do
not use the AutoUpdate function of the Software, you must ensure that you are using the current and thus up-to-date version of the Software
in each case by carrying out manual updates via the Hilti Website. Hilti will not be liable for consequences, such as the recovery of lost or
damaged data or programs, arising from a culpable breach of duty by you.