3 ack M.TECH ( M S WORD FILE )
•Download as DOC, PDF•
0 likes•11 views
The author thanks their supervisor, Mrs. Archana Mewara, for providing guidance and direction during their work. They also thank the principal of their university, Prof. Dr. Vishnu Sharma, for allowing them to complete their Master's program, and the head of their department, Mr. L. N. Balai, for providing software and lab access. Finally, the author expresses gratitude to the entire faculty and staff of the Electronics and Communication Engineering department for their encouragement and support during the dissertation process.
Report
Share
Report
Share
Recommended
Online Video Lessons Preparation - R.D.Sivakumar
This document outlines the various stages of developing online video lessons:
1. Selection of topic and preparation of a write-up on the topic, identifying points to include multimedia elements like text, images, and graphics.
2. Converting the write-up into a pre-production technical script.
3. Downloading or creating multimedia elements like images, videos, animations, and PowerPoint slides.
4. Rehearsing, shooting the video, post-production editing and integration of digital elements, and hosting the final e-content online.
MOOC - SWAYAM - 4 Quadrants Approach - R.D.Sivakumar
The document discusses the four quadrants approach of MOOC-SWAYAM which includes e-tutorial content, e-content such as videos and audio, a discussion forum, and assessment features. The first quadrant contains self-instructional materials like e-books and illustrations. The second quadrant includes video, audio, animations and simulations. The third quadrant is a discussion forum for students to clarify doubts. The fourth quadrant provides problems and solutions for assessment in various formats like multiple choice questions and short essays.
Introduction to E-Learning - R.D.Sivakumar
E-learning is an alternative method of delivering and receiving education through electronic means rather than traditional classroom settings. It allows people to learn on their own from any environment using online resources rather than instructor-led learning. E-learning provides flexibility for self-paced study outside of a physical classroom.
Creation of Audio Lessons - R.D.Sivakumar
R.D. Sivakumar discusses creating audio lessons and audio books. He explains that an audiobook is a recorded book that can be played on a computer or mobile device. He recommends using the free, open source audio recording and editing application Audacity to record audio lessons. He then discusses uploading the recorded audio files to cloud audio book websites so they can be accessed online.
Front page
The RAIN project is research collaboration between Caltech and NASA-JPL on distributed computing and data storage systems for future space-borne missions. The goal of the project is to identify and develop key building blocks for reliable distributed systems built with inexpensive off- the-shelf components. The RAIN platform consists of a heterogeneous cluster of computing and/or storage nodes connected via multiple interfaces to networks configured in fault-tolerant topologies. The RAIN software components run in conjunction with operating system services and standard network protocols. Through software-implemented fault tolerance, the system tolerates multiple node, link, and switch failures, with no single point of failure. The RAIN technology has been transferred to RAIN finity, a start-up company focusing on creating clustered solutions for improving the performance and availability of Internet data centers.
Acknowledgement & certficate on skinput
This document acknowledges and thanks several professors for their assistance and support in completing a seminar. It expresses gratitude to Prof. S. AVINASH for providing an environment to present the seminar, Prof. Smurti Ranjan Das for giving cooperation and inspiration, and Prof. Smurti Ranjan Das for helpful guidance to complete the seminar work. It also thanks the entire Department of Computer Science & Engineering for their various assistance in completing the seminar.
Our ack separete
The student thanks his mentor Mr. P. Arjunkumar for his guidance throughout the course and on completing his dissertation work. He also thanks the Head of the Information Technology department Mr. M. L. Prasad for encouragement, the Principal Dr. D. N. Rao and others who assisted in completing the project successfully. Finally, he expresses gratitude to the College Chairman for infrastructure, his friends for cooperation, and his parents for their support in allowing him to reach this level.
Acknowledgement
The author expresses gratitude to several professors at Synergy Institute of Engineering and Technology for their support and guidance during his seminar work. He thanks Prof. Dr. B.B. Sahoo for his supervision and encouragement. He also thanks Asst. Prof. Mrs. Nibedita Sahoo for permitting the use of institute facilities, and Asst. Prof. Mr. Niranjan Sahoo and Asst. Prof. Mrs Chandana Subudhi for their cooperation and academic support. Finally, the author acknowledges others who helped behind the scenes to make the seminar possible.
Recommended
Online Video Lessons Preparation - R.D.Sivakumar
This document outlines the various stages of developing online video lessons:
1. Selection of topic and preparation of a write-up on the topic, identifying points to include multimedia elements like text, images, and graphics.
2. Converting the write-up into a pre-production technical script.
3. Downloading or creating multimedia elements like images, videos, animations, and PowerPoint slides.
4. Rehearsing, shooting the video, post-production editing and integration of digital elements, and hosting the final e-content online.
MOOC - SWAYAM - 4 Quadrants Approach - R.D.Sivakumar
The document discusses the four quadrants approach of MOOC-SWAYAM which includes e-tutorial content, e-content such as videos and audio, a discussion forum, and assessment features. The first quadrant contains self-instructional materials like e-books and illustrations. The second quadrant includes video, audio, animations and simulations. The third quadrant is a discussion forum for students to clarify doubts. The fourth quadrant provides problems and solutions for assessment in various formats like multiple choice questions and short essays.
Introduction to E-Learning - R.D.Sivakumar
E-learning is an alternative method of delivering and receiving education through electronic means rather than traditional classroom settings. It allows people to learn on their own from any environment using online resources rather than instructor-led learning. E-learning provides flexibility for self-paced study outside of a physical classroom.
Creation of Audio Lessons - R.D.Sivakumar
R.D. Sivakumar discusses creating audio lessons and audio books. He explains that an audiobook is a recorded book that can be played on a computer or mobile device. He recommends using the free, open source audio recording and editing application Audacity to record audio lessons. He then discusses uploading the recorded audio files to cloud audio book websites so they can be accessed online.
Front page
The RAIN project is research collaboration between Caltech and NASA-JPL on distributed computing and data storage systems for future space-borne missions. The goal of the project is to identify and develop key building blocks for reliable distributed systems built with inexpensive off- the-shelf components. The RAIN platform consists of a heterogeneous cluster of computing and/or storage nodes connected via multiple interfaces to networks configured in fault-tolerant topologies. The RAIN software components run in conjunction with operating system services and standard network protocols. Through software-implemented fault tolerance, the system tolerates multiple node, link, and switch failures, with no single point of failure. The RAIN technology has been transferred to RAIN finity, a start-up company focusing on creating clustered solutions for improving the performance and availability of Internet data centers.
Acknowledgement & certficate on skinput
This document acknowledges and thanks several professors for their assistance and support in completing a seminar. It expresses gratitude to Prof. S. AVINASH for providing an environment to present the seminar, Prof. Smurti Ranjan Das for giving cooperation and inspiration, and Prof. Smurti Ranjan Das for helpful guidance to complete the seminar work. It also thanks the entire Department of Computer Science & Engineering for their various assistance in completing the seminar.
Our ack separete
The student thanks his mentor Mr. P. Arjunkumar for his guidance throughout the course and on completing his dissertation work. He also thanks the Head of the Information Technology department Mr. M. L. Prasad for encouragement, the Principal Dr. D. N. Rao and others who assisted in completing the project successfully. Finally, he expresses gratitude to the College Chairman for infrastructure, his friends for cooperation, and his parents for their support in allowing him to reach this level.
Acknowledgement
The author expresses gratitude to several professors at Synergy Institute of Engineering and Technology for their support and guidance during his seminar work. He thanks Prof. Dr. B.B. Sahoo for his supervision and encouragement. He also thanks Asst. Prof. Mrs. Nibedita Sahoo for permitting the use of institute facilities, and Asst. Prof. Mr. Niranjan Sahoo and Asst. Prof. Mrs Chandana Subudhi for their cooperation and academic support. Finally, the author acknowledges others who helped behind the scenes to make the seminar possible.
4 Acknowledgement_sougata.docx
The document acknowledges those who helped the author with their PhD thesis on strategies for enhancing performance in low voltage and low power operational transconductance amplifiers. It thanks the thesis supervisor for their guidance and for providing materials. It also thanks the director and head of the department for monitoring the work. The document expresses gratitude to colleagues for their assistance and to the funding provided by the Ministry of Electronics and Information Technology for resources. Finally, it thanks family for their love and support.
Ack
The student expresses gratitude to several people who helped make the successful completion of their dissertation possible. They thank their department head MD. MUSTAQ AHMED and principal ALEEMUDDIN ILIYAS for providing facilities. They also thank their guide K. SHRAVAN KUMAR for supporting them in completing the dissertation. Finally, the student thanks their staff, parents, and friends for their constant encouragement and contribution to finishing the dissertation.
Artificial vision
The document declares that the seminar report on "Artificial Vision" is being submitted to fulfill the requirements for a Bachelor of Technology degree. It states that the seminar has not been previously submitted for any other degree. The acknowledgements section thanks faculty and staff for their support and guidance. The abstract introduces that researchers are developing electronic strategies to provide artificial sight by bypassing defects in the visual pathway, and that this paper will describe developing technology to provide or restore vision for the visually impaired.
2.acknowledgement
The document acknowledges various individuals who provided support and guidance for a student project. It thanks the chairman of Bharathiyar College of Engineering and Technology for allowing the use of college facilities. It also expresses gratitude to the principal, head of the electronics and communication engineering department, project coordinators, project guide, and all ECE department staff members for their assistance and encouragement with the project. Finally, it acknowledges the students' parents and friends for their inspiration and support.
BNCET , Sample Report On Presentation
Bhanu Prakash completed a vocational training report at Bharat Heavy Electricals Limited (BHEL) in Varanasi, India to fulfill the requirements for a Bachelor of Technology degree in Mechanical Engineering. The report provides an overview of BHEL, which is an Indian engineering and manufacturing company involved in power generation, transmission and distribution, industries, transportation, telecommunication, and renewable energy. It also discusses BHEL's technology upgradation and research and development efforts as well as its policies regarding human resources, health, safety, and the environment.
Condidate dec. (3)
The document is a candidate's declaration for a project titled "CLAP SWITCH" submitted in partial fulfillment of a Bachelor of Technology degree. It declares that the work is the candidate's own investigation carried out under the guidance of an assistant professor. It also acknowledges the guidance and support received from the project guide, various faculty members, and technical papers referred to in completing the project.
electrical_project_chandresh_report on laser Transmitter and Receiver_acknowl...
The document acknowledges and thanks several people who provided guidance and support for a project. It expresses gratitude to the supervisor for meticulous guidance and encouragement. Thanks are also given to the head of the department for facilities, faculty members for cooperation and support, and the entire department for assistance. Finally, it thanks family for love and inspiration throughout the project.
Research paper collection by vitul chauhan.pdf
- The document contains messages from the Conference Chair, Organizing Chair, and Publication Chair of the Fifth International Conference on Inventive Computation Technologies (ICICT 2022).
- The messages welcome attendees to the conference, note it will provide a platform to exchange ideas and share knowledge on recent advances in communication and computing technologies, and thank those involved in organizing the event.
- A list of committee members for the conference is also included.
Final Internship Report
Final Internship Report at Institute of Information Technology, University of Dhaka (IIT, DU [http://www.iit.du.ac.bd]); performed at Jantrik Technologies Ltd. [http://www.jantrik.com]
ARSHAL'S ORGANIZATION STUDY OF THE KERALA MINERALS AND METALS
This project report describes the development of an IT Factory Testimony System. The existing system of manual record keeping is inefficient. The proposed system automates the testimony process using a computerized system. The system has modules for user login, testimony entry, viewing testimonies, and admin operations. It was developed using PHP and MySQL on a Windows platform. The system was tested and implemented successfully at the IT factory. The automated system provides efficient and improved management of testimony records compared to the previous manual process.
Meerut Institute of Engineering.docx
This document contains seminar reports from two students - Shriyansh Sharma and Nitin Kumar Ansal. Shriyansh's report is on the topic of Big Data and was submitted to fulfill requirements for an M.Tech in Computer Science and Engineering. Nitin's report is on Digital Forensics and was also submitted for an M.Tech in Computer Science and Engineering. Both reports acknowledge their guide Dr. Mukesh Rawat for support and guidance on their work.
4.acknowledgement
Mr. Naresh thanks several people who helped him complete his education project. He thanks the director of his college, Mr. A.V. Pratap Reddy, for giving him the opportunity to further his education. He also thanks the principal, Mr. S. Jameel Basha, for his guidance and supervision that helped Naresh successfully complete his project. Additionally, he thanks the Head of the Department, Mr. G. Sesha Phaneendra Babu, for his constant support during the project. Finally, Naresh thanks his parents, friends, and lab assistants for their assistance in helping him finish the project successfully.
Revised_Paridhi_Thesis_Fullmerged.pdf
The document is a thesis submitted by Paridhi Malhotra for the degree of Doctor of Philosophy in Mechanical Engineering at Amity University Uttar Pradesh, Noida, India in 2021. The thesis investigates the improvement of performance of the Electrical Discharge Machining (EDM) process using a multi-hole electrode and powder mixed dielectric. The thesis is supervised by Dr. R.K Tyagi, Dr. Basant Singh Sikarwar, and Dr. Andriya Narasimhulu. The study aims to compare traditional EDM and rotary EDM processes and analyze the influence of process parameters on EDM of hybrid metal matrix composites. It also seeks to compare REDM,
Candidate declaration on Google Glass
1) The candidate declares that the work presented in their dissertation titled "Seminar Report" is their own investigation carried out under the guidance of their supervisor, Mr. Suneel Kumar, for their Bachelor of Technology degree in Computer Science Engineering from Shekhawati Institute of Engineering and Technology.
2) The candidate has not submitted this work anywhere else for another degree.
3) The candidate acknowledges their project supervisor, Mrs. Suman Singh, and the staff of the Computer Science department at Shekhawati Institute of Engineering and Technology for their guidance and assistance with the project.
WSO2 Internship Report
This report contains the training details and project details that I have done in the internship at WSO2
Report_original_hari
This document is an industrial training report submitted by Hariharan K. to the Department of Electrical and Information Engineering at the University of Ruhuna. It details Hariharan's 3-month training period at Effective Solutions (Pvt) Ltd from January to March 2016. The report provides an introduction to Effective Solutions and describes the projects and tasks Hariharan worked on, including setting up various development environments and working on a Smart Messaging System project. It acknowledges those who helped support the training period and provides tables of contents, lists of figures/tables, and references used.
Report of undergraduate training at ceylon electricity board
This document provides an overview of the author's 12-week industrial training at Ceylon Electricity Board (CEB) from December 2016 to March 2017. It includes:
1) An introduction to CEB, including its vision, mission, organizational structure, present performance, strengths, and weaknesses.
2) A description of the author's technical training experiences in CEB's Generation, Transmission, Distribution, Planning, and System Control divisions. Specific experiences at Lakvijaya Power Plant and Kotmale Power Station are discussed.
3) Details on the management training experiences in safety management and worker management.
4) A concluding chapter that will summarize the overall training experience and lessons learned.
Report by mohit on grinders
Mohit Kumar R. Singh submitted a seminar report on grinders to his professors Ms. Niharika Dutt and Ms. Priyanka Goyal of the Department of Chemical Engineering at Noida Institute of Engineering and Technology. The report defines grinders as machines used to reduce materials to fine particles and lists several common types including ball mills, hammer mills, tube mills, rolling mills, attrition mills, agitated mills, and fluid energy mills. It acknowledges the support and guidance of his faculty members and classmates in completing the seminar successfully.
Acknow
The students acknowledge and express gratitude to their mentor and assistant professor Mr. P. Arjunkumar for his guidance during their M.Tech course and dissertation work. They also thank the head of the Information Technology department Mr. M. L. M. Prasad for his encouragement and support during their studies. Finally, they thank the principal, chairman, friends, and parents for their contributions and support which helped them complete their course successfully.
Acknowledgement
The author acknowledges and thanks several individuals who provided support and guidance in the successful completion of a project report. This includes the chairman, principal, head of the department of business administration, and project guide from Siddharth Institute of Engineering & Technology, as well as family members and friends who provided moral support and encouragement.
150 Exercícios AutoCAD.pdf
This document provides a preface and disclaimer for a set of 2D and 3D CAD exercises. The preface outlines that the book contains 100 2D exercises and 50 3D exercises in CAD software like AutoCAD, SolidWorks, and Inventor. It notes each exercise can be done separately at any skill level and uses metric dimensions. The disclaimer states the exercises are for practice and not tutorials, and that no part of the publication may be reproduced without permission.
Autocad PDF.pdf
This document outlines the terms and conditions for a home loan agreement between John Doe and ABC Bank. It specifies that John Doe will receive a $200,000 loan at 4% annual interest to purchase a property located at 123 Main St. The loan is to be repaid over 30 years through monthly installments of $1,000 beginning on January 1, 2023, with the full balance due by December 31, 2052. The document details various clauses around late fees, prepayment, and foreclosure.
More Related Content
Similar to 3 ack M.TECH ( M S WORD FILE )
4 Acknowledgement_sougata.docx
The document acknowledges those who helped the author with their PhD thesis on strategies for enhancing performance in low voltage and low power operational transconductance amplifiers. It thanks the thesis supervisor for their guidance and for providing materials. It also thanks the director and head of the department for monitoring the work. The document expresses gratitude to colleagues for their assistance and to the funding provided by the Ministry of Electronics and Information Technology for resources. Finally, it thanks family for their love and support.
Ack
The student expresses gratitude to several people who helped make the successful completion of their dissertation possible. They thank their department head MD. MUSTAQ AHMED and principal ALEEMUDDIN ILIYAS for providing facilities. They also thank their guide K. SHRAVAN KUMAR for supporting them in completing the dissertation. Finally, the student thanks their staff, parents, and friends for their constant encouragement and contribution to finishing the dissertation.
Artificial vision
The document declares that the seminar report on "Artificial Vision" is being submitted to fulfill the requirements for a Bachelor of Technology degree. It states that the seminar has not been previously submitted for any other degree. The acknowledgements section thanks faculty and staff for their support and guidance. The abstract introduces that researchers are developing electronic strategies to provide artificial sight by bypassing defects in the visual pathway, and that this paper will describe developing technology to provide or restore vision for the visually impaired.
2.acknowledgement
The document acknowledges various individuals who provided support and guidance for a student project. It thanks the chairman of Bharathiyar College of Engineering and Technology for allowing the use of college facilities. It also expresses gratitude to the principal, head of the electronics and communication engineering department, project coordinators, project guide, and all ECE department staff members for their assistance and encouragement with the project. Finally, it acknowledges the students' parents and friends for their inspiration and support.
BNCET , Sample Report On Presentation
Bhanu Prakash completed a vocational training report at Bharat Heavy Electricals Limited (BHEL) in Varanasi, India to fulfill the requirements for a Bachelor of Technology degree in Mechanical Engineering. The report provides an overview of BHEL, which is an Indian engineering and manufacturing company involved in power generation, transmission and distribution, industries, transportation, telecommunication, and renewable energy. It also discusses BHEL's technology upgradation and research and development efforts as well as its policies regarding human resources, health, safety, and the environment.
Condidate dec. (3)
The document is a candidate's declaration for a project titled "CLAP SWITCH" submitted in partial fulfillment of a Bachelor of Technology degree. It declares that the work is the candidate's own investigation carried out under the guidance of an assistant professor. It also acknowledges the guidance and support received from the project guide, various faculty members, and technical papers referred to in completing the project.
electrical_project_chandresh_report on laser Transmitter and Receiver_acknowl...
The document acknowledges and thanks several people who provided guidance and support for a project. It expresses gratitude to the supervisor for meticulous guidance and encouragement. Thanks are also given to the head of the department for facilities, faculty members for cooperation and support, and the entire department for assistance. Finally, it thanks family for love and inspiration throughout the project.
Research paper collection by vitul chauhan.pdf
- The document contains messages from the Conference Chair, Organizing Chair, and Publication Chair of the Fifth International Conference on Inventive Computation Technologies (ICICT 2022).
- The messages welcome attendees to the conference, note it will provide a platform to exchange ideas and share knowledge on recent advances in communication and computing technologies, and thank those involved in organizing the event.
- A list of committee members for the conference is also included.
Final Internship Report
Final Internship Report at Institute of Information Technology, University of Dhaka (IIT, DU [http://www.iit.du.ac.bd]); performed at Jantrik Technologies Ltd. [http://www.jantrik.com]
ARSHAL'S ORGANIZATION STUDY OF THE KERALA MINERALS AND METALS
This project report describes the development of an IT Factory Testimony System. The existing system of manual record keeping is inefficient. The proposed system automates the testimony process using a computerized system. The system has modules for user login, testimony entry, viewing testimonies, and admin operations. It was developed using PHP and MySQL on a Windows platform. The system was tested and implemented successfully at the IT factory. The automated system provides efficient and improved management of testimony records compared to the previous manual process.
Meerut Institute of Engineering.docx
This document contains seminar reports from two students - Shriyansh Sharma and Nitin Kumar Ansal. Shriyansh's report is on the topic of Big Data and was submitted to fulfill requirements for an M.Tech in Computer Science and Engineering. Nitin's report is on Digital Forensics and was also submitted for an M.Tech in Computer Science and Engineering. Both reports acknowledge their guide Dr. Mukesh Rawat for support and guidance on their work.
4.acknowledgement
Mr. Naresh thanks several people who helped him complete his education project. He thanks the director of his college, Mr. A.V. Pratap Reddy, for giving him the opportunity to further his education. He also thanks the principal, Mr. S. Jameel Basha, for his guidance and supervision that helped Naresh successfully complete his project. Additionally, he thanks the Head of the Department, Mr. G. Sesha Phaneendra Babu, for his constant support during the project. Finally, Naresh thanks his parents, friends, and lab assistants for their assistance in helping him finish the project successfully.
Revised_Paridhi_Thesis_Fullmerged.pdf
The document is a thesis submitted by Paridhi Malhotra for the degree of Doctor of Philosophy in Mechanical Engineering at Amity University Uttar Pradesh, Noida, India in 2021. The thesis investigates the improvement of performance of the Electrical Discharge Machining (EDM) process using a multi-hole electrode and powder mixed dielectric. The thesis is supervised by Dr. R.K Tyagi, Dr. Basant Singh Sikarwar, and Dr. Andriya Narasimhulu. The study aims to compare traditional EDM and rotary EDM processes and analyze the influence of process parameters on EDM of hybrid metal matrix composites. It also seeks to compare REDM,
Candidate declaration on Google Glass
1) The candidate declares that the work presented in their dissertation titled "Seminar Report" is their own investigation carried out under the guidance of their supervisor, Mr. Suneel Kumar, for their Bachelor of Technology degree in Computer Science Engineering from Shekhawati Institute of Engineering and Technology.
2) The candidate has not submitted this work anywhere else for another degree.
3) The candidate acknowledges their project supervisor, Mrs. Suman Singh, and the staff of the Computer Science department at Shekhawati Institute of Engineering and Technology for their guidance and assistance with the project.
WSO2 Internship Report
This report contains the training details and project details that I have done in the internship at WSO2
Report_original_hari
This document is an industrial training report submitted by Hariharan K. to the Department of Electrical and Information Engineering at the University of Ruhuna. It details Hariharan's 3-month training period at Effective Solutions (Pvt) Ltd from January to March 2016. The report provides an introduction to Effective Solutions and describes the projects and tasks Hariharan worked on, including setting up various development environments and working on a Smart Messaging System project. It acknowledges those who helped support the training period and provides tables of contents, lists of figures/tables, and references used.
Report of undergraduate training at ceylon electricity board
This document provides an overview of the author's 12-week industrial training at Ceylon Electricity Board (CEB) from December 2016 to March 2017. It includes:
1) An introduction to CEB, including its vision, mission, organizational structure, present performance, strengths, and weaknesses.
2) A description of the author's technical training experiences in CEB's Generation, Transmission, Distribution, Planning, and System Control divisions. Specific experiences at Lakvijaya Power Plant and Kotmale Power Station are discussed.
3) Details on the management training experiences in safety management and worker management.
4) A concluding chapter that will summarize the overall training experience and lessons learned.
Report by mohit on grinders
Mohit Kumar R. Singh submitted a seminar report on grinders to his professors Ms. Niharika Dutt and Ms. Priyanka Goyal of the Department of Chemical Engineering at Noida Institute of Engineering and Technology. The report defines grinders as machines used to reduce materials to fine particles and lists several common types including ball mills, hammer mills, tube mills, rolling mills, attrition mills, agitated mills, and fluid energy mills. It acknowledges the support and guidance of his faculty members and classmates in completing the seminar successfully.
Acknow
The students acknowledge and express gratitude to their mentor and assistant professor Mr. P. Arjunkumar for his guidance during their M.Tech course and dissertation work. They also thank the head of the Information Technology department Mr. M. L. M. Prasad for his encouragement and support during their studies. Finally, they thank the principal, chairman, friends, and parents for their contributions and support which helped them complete their course successfully.
Acknowledgement
The author acknowledges and thanks several individuals who provided support and guidance in the successful completion of a project report. This includes the chairman, principal, head of the department of business administration, and project guide from Siddharth Institute of Engineering & Technology, as well as family members and friends who provided moral support and encouragement.
Similar to 3 ack M.TECH ( M S WORD FILE ) (20)
electrical_project_chandresh_report on laser Transmitter and Receiver_acknowl...
electrical_project_chandresh_report on laser Transmitter and Receiver_acknowl...
ARSHAL'S ORGANIZATION STUDY OF THE KERALA MINERALS AND METALS
ARSHAL'S ORGANIZATION STUDY OF THE KERALA MINERALS AND METALS
Report of undergraduate training at ceylon electricity board
Report of undergraduate training at ceylon electricity board
More from rajasthan technical university kota
150 Exercícios AutoCAD.pdf
This document provides a preface and disclaimer for a set of 2D and 3D CAD exercises. The preface outlines that the book contains 100 2D exercises and 50 3D exercises in CAD software like AutoCAD, SolidWorks, and Inventor. It notes each exercise can be done separately at any skill level and uses metric dimensions. The disclaimer states the exercises are for practice and not tutorials, and that no part of the publication may be reproduced without permission.
Autocad PDF.pdf
This document outlines the terms and conditions for a home loan agreement between John Doe and ABC Bank. It specifies that John Doe will receive a $200,000 loan at 4% annual interest to purchase a property located at 123 Main St. The loan is to be repaid over 30 years through monthly installments of $1,000 beginning on January 1, 2023, with the full balance due by December 31, 2052. The document details various clauses around late fees, prepayment, and foreclosure.
General Exercise A2.pdf
This 1 sentence document provides a website, WWW.CADDESIGNS.IN, where users can access practice drawings and video tutorials related to CAD designs.
MSME General Exercise - Copy.pdf
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Manmohan 15% PLAGIARISM REPORT M.TECH ( M S WORD FILE )
The document provides an overview of Multi-Carrier Code Division Multiple Access (MC-CDMA) systems and discusses several related research papers. It then summarizes 21 research papers on topics such as: implementing space-time coding and discrete wavelet transforms in MC-CDMA systems to improve performance; using wavelet packets as modulation waveforms to eliminate guard intervals; flexible MC-CDMA system designs; and evaluating the performance of different wavelet transforms in MC-CDMA communications. The document analyzes various techniques for enhancing the spectral efficiency and performance of MC-CDMA systems.
Manmohan 15% PLAGIARISM REPORT M.TECH ( PDF FILE )
The document is a 15,991-word literature review on MC-CDMA (multi-carrier code division multiple access) communication systems. It cites 106 different sources, including publications, internet sources, and student papers. The sources cover topics like MC-CDMA system design and performance analysis, modulation techniques for MC-CDMA, and comparisons with other multi-carrier systems.
Final project M.TECH ( PPT FILE )
This document summarizes a research project comparing wavelet packet based MC-CDMA with conventional MC-CDMA using the Hilbert-Huang transform tool. The research aims to show that wavelet packet based MC-CDMA has better bit error rate performance than conventional MC-CDMA in dealing with channel fading and interference. It provides background on MC-CDMA and wavelet packet techniques. It outlines the methodology which involves simulation using MATLAB and the Hilbert-Huang transform tool for spectral analysis. The expected outcome is that wavelet packet MC-CDMA will demonstrate comparative superiority over conventional MC-CDMA.
Final prentation M.TECH ( PPT )
The document compares wavelet packet based MC-CDMA to conventional MC-CDMA. It proposes using wavelet packets instead of sinusoidal carriers for MC-CDMA. Wavelet packets have lower sidelobes, better time-frequency localization, and maintain orthogonality for overlapped signals. This improves performance by reducing interference and relaxing separation requirements between signals. Simulation results show the proposed wavelet packet based MC-CDMA outperforms conventional MC-CDMA, especially in combating fading channels.
Atm presentation M.TECH ( PPT FILE )
This document discusses ATM basics for WCDMA networks. It describes the different network transfer modes including synchronous transfer mode, packet transfer mode, and asynchronous transfer mode. Asynchronous transfer mode is highlighted as a compromise that supports voice, video, and data over WCDMA networks by providing quality of service guarantees. Key aspects of ATM like cells, virtual paths, virtual connections, and service classes are defined. The document also outlines why ATM is used as the transport protocol in 3G networks.
3 rd sem atm M.TCH ( PPT FILE )
This document discusses ATM basics for WCDMA networks. It describes the different network transfer modes including synchronous transfer mode, packet transfer mode, and asynchronous transfer mode. Asynchronous transfer mode is highlighted as a compromise that supports voice, video, and data over WCDMA networks by providing quality of service guarantees. Key aspects of ATM like cells, virtual paths, virtual connections, and service classes are defined. The document also outlines why ATM is used as the transport protocol in 3G networks.
3rd sem atm basics for wcdma networks M.TECH ( PDF FILE )
The document is a dissertation submitted for a Master of Technology degree focused on ATM basics for WCDMA networks. It includes a title page, certificate of approval from the supervisor, candidate's declaration, acknowledgements, table of contents, lists of abbreviations and symbols, and 12 chapters covering topics like ATM standards, the physical layer, ATM layer, adaptation layer, signaling, traffic descriptors, and quality of service parameters. The dissertation provides an in-depth technical overview of Asynchronous Transfer Mode (ATM) networking concepts as they relate to Wideband Code Division Multiple Access (WCDMA) wireless networks.
3rd sem atm basics for wcdma networks M.TECH ( M S WORD FILE )
This document is a dissertation submitted for a Master of Technology degree focused on ATM basics for WCDMA networks. It includes a title page, certificate of approval from the supervisor, candidate's declaration, acknowledgements, table of contents, lists of abbreviations and symbols, and 12 chapters covering topics like ATM standards, the physical layer, ATM layer, adaptation layer, signaling, traffic descriptors, and quality of service parameters. The dissertation provides a comprehensive overview of Asynchronous Transfer Mode (ATM) technology as it relates to 3G wireless networks.
Project sinopsis final M.TECH ( PDF FILE )
This document appears to be a dissertation submitted for a Master's degree in digital communication engineering. It discusses comparative analysis of wavelet packet based MC-CDMA and conventional MC-CDMA systems. The dissertation includes sections on literature review, wavelet packets, MC-CDMA systems, wavelet packet based MC-CDMA system, performance measures, methodology, and expected outcomes. The student conducted this research under the guidance of their supervisor.
Project sinopsis final M.TECH ( M S WORD FILE )
This document is a dissertation that proposes a wavelet packet based MC-CDMA system and compares its performance to a conventional MC-CDMA system using HHT tool. It first provides background on conventional MC-CDMA and its components. It then introduces wavelet packets and describes how they can be used to create a wavelet packet based MC-CDMA system. The document outlines the methodology that will be used to simulate both systems over an AWGN channel and compare their bit error rate, mean square error, and peak signal to noise ratio to determine if the wavelet packet system performs better. The expected outcome is that the wavelet packet based MC-CDMA system will have superior performance to the conventional MC-CDMA
11 appendix M.TECH ( M S WORD FILE )
This document summarizes the simulation steps for investigating the performance of three multi-carrier code division multiple access (MC-CDMA) techniques: conventional MC-CDMA, orthogonal wavelet packet based MC-CDMA (WP-MC-CDMA), and Huang Hilbert Transformation (HHT) based MC-CDMA. The steps include designing the three systems, simulating them with different modulation techniques under fading channels, and comparing their bit error rate performance. Numerical and simulation results are presented to validate the proposed schemes.
10 list of publication M.TECH ( M S WORD FILE )
The document lists 9 publications by Manmohan Singh Chandoliya and Ms. Anila Dingra between 2014-2015. The publications analyze and compare wavelet packet based MC-CDMA communication systems with conventional MC-CDMA systems using different transforms and modulation techniques. Additional publications examine using multi-microcontroller communication for industrial control applications.
9 refrences M.TECH ( M S WORD FILE )
This document contains 37 references related to research on multi-carrier code division multiple access (MC-CDMA) communication systems. The references cover topics like MC-CDMA system design, performance analysis under different channel conditions, receiver design techniques, and comparisons with other digital communication systems. The references are from a variety of academic sources including IEEE journals and conference proceedings published between 1993 and 2008.
8 glossary & keywords M.TECH ( M S WORD FILE )
The document defines and describes several key terms related to digital signal processing and wireless communications:
- Hilbert-Huang Transform (HHT) is a technique to decompose non-stationary and non-linear time series data into intrinsic mode functions (IMFs) and obtain instantaneous frequency information.
- Orthogonal Frequency Division Multiplexing (OFDM) is a digital multi-carrier modulation technique that is widely used today.
- Bit Error Rate (BER) is the ratio of bit errors to total transmitted bits over a period of time and is used to measure communication quality.
- Quadrature Phase Shift Keying (QPSK) is a modulation scheme that encodes 2 bits per symbol by
More from rajasthan technical university kota (20)
Manmohan 15% PLAGIARISM REPORT M.TECH ( M S WORD FILE )
Manmohan 15% PLAGIARISM REPORT M.TECH ( M S WORD FILE )
Manmohan 15% PLAGIARISM REPORT M.TECH ( PDF FILE )
Manmohan 15% PLAGIARISM REPORT M.TECH ( PDF FILE )
3rd sem atm basics for wcdma networks M.TECH ( PDF FILE )
3rd sem atm basics for wcdma networks M.TECH ( PDF FILE )
3rd sem atm basics for wcdma networks M.TECH ( M S WORD FILE )
3rd sem atm basics for wcdma networks M.TECH ( M S WORD FILE )
8 glossary & keywords M.TECH ( M S WORD FILE )
8 glossary & keywords M.TECH ( M S WORD FILE )
Recently uploaded
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
DfMAy 2024 - key insights and contributions
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
Technical Drawings introduction to drawing of prisms
Method of technical Drawing of prisms,and cylinders.
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Low power architecture of logic gates using adiabatic techniques
The growing significance of portable systems to limit power consumption in ultra-large-scale-integration chips of very high density, has recently led to rapid and inventive progresses in low-power design. The most effective technique is adiabatic logic circuit design in energy-efficient hardware. This paper presents two adiabatic approaches for the design of low power circuits, modified positive feedback adiabatic logic (modified PFAL) and the other is direct current diode based positive feedback adiabatic logic (DC-DB PFAL). Logic gates are the preliminary components in any digital circuit design. By improving the performance of basic gates, one can improvise the whole system performance. In this paper proposed circuit design of the low power architecture of OR/NOR, AND/NAND, and XOR/XNOR gates are presented using the said approaches and their results are analyzed for powerdissipation, delay, power-delay-product and rise time and compared with the other adiabatic techniques along with the conventional complementary metal oxide semiconductor (CMOS) designs reported in the literature. It has been found that the designs with DC-DB PFAL technique outperform with the percentage improvement of 65% for NOR gate and 7% for NAND gate and 34% for XNOR gate over the modified PFAL techniques at 10 MHz respectively.
bank management system in java and mysql report1.pdf
truth is high but higher still is truth full living
Recently uploaded (20)
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
2. Operations Strategy in a Global Environment.ppt
2. Operations Strategy in a Global Environment.ppt
Low power architecture of logic gates using adiabatic techniques
Low power architecture of logic gates using adiabatic techniques
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
bank management system in java and mysql report1.pdf
bank management system in java and mysql report1.pdf
3 ack M.TECH ( M S WORD FILE )
- 1. ii ACKNOWLEDGEMENT I would like to thank my supervisor Mrs. Archana Mewara, Asst. Professor, Department of Electronics and Communication Engineering for providing me opportunity to work under him and his consistent direction, he has fed in my work. It’s my privilege to acknowledge my profound sense of gratitude to my supervisor for his comments, suggestions, encouragement and inspiring guidance throughout the course of the dissertation work. I also wish to extend my thanks to Prof. Dr.Vishnu Sharma, Principal, YIT to give me an opportunity to carry out my Master of Technology program. I also wish to extend my sincere thanks to Mr. L. N. Balai, H.O.D., Department of Electronics and Communication Engineering for providing software and laboratories as additional facilities to do Master of Technology. At last but not the least I would like to place on record my sincere gratitude to faculties & staff of Department of Electronics and Communication Engineering for providing fruitful environment and continuous encouragement throughout the course of completion of my dissertation. With sincere thanks from Manmohan Singh Chandoliya Enrolment No. 12E2YTDCM3XP603