1. The document discusses various methods of classifying and categorizing costs for manufacturing businesses, including direct vs indirect costs, product vs period costs, and classifications of different types of overhead costs.
2. Key cost categories discussed include direct materials, direct labor, indirect materials, indirect labor, prime costs, conversion costs, administration costs, selling costs, distribution costs, and finance costs.
3. The document also provides an example cost sheet format that categorizes costs and calculates key metrics like cost of goods sold.
The document discusses the classification of costs for manufacturing. It categorizes costs into three types: materials, labor, and expenses. Costs are also classified as either product costs, which are costs of manufacturing products, or period costs, which are charged to the income statement each period. Product costs include direct costs like direct materials, labor, and expenses as well as indirect costs like indirect materials, labor, and expenses. Period costs include administration, selling, distribution, research, and finance costs. The document also provides a cost sheet format and discusses concepts around material management.
The document discusses the components of a cost sheet, including direct costs, indirect costs, and calculations. It provides a sample cost sheet for a company producing 1 lakh units of bread. Direct costs include raw materials, direct labor, and direct expenses. Indirect costs include factory overheads, office administration overheads, and sales/distribution overheads. The cost sheet calculates costs per unit and totals for raw materials, labor, overheads, cost of production, sales, and profit.
This document provides an overview of cost accounting, including key definitions and concepts. It discusses:
1) Cost accounting identifies, measures, records, classifies, summarizes, interprets, and communicates the costs of manufacturing firms.
2) Costs are classified in various ways, including by relationship to products (direct vs indirect), behavior (fixed vs variable), and traceability.
3) Job order costing is used when products are made to customer order. It accumulates costs by job and uses a work in process account for each job.
The document provides an introduction to cost accounting concepts including definitions of costing, cost accounting, and cost accountancy. It discusses the elements of cost including direct and indirect materials, direct and indirect labor, and direct and indirect expenses. It also defines key cost accounting terms like prime cost, factory cost, cost of production, and overhead. The document explains the treatment of various cost items and overhead and how they are classified and allocated.
The document discusses various aspects of classifying and defining costs. It defines direct costs as costs that can be traced to a specific cost object, like direct materials and direct labor. Indirect costs are costs that cannot be directly traced to a cost object, like manufacturing overheads. It provides examples of different types of direct and indirect costs such as direct materials, direct labor, indirect materials, and indirect labor. The document also discusses classifying costs by their nature into material, labor, and expenses costs. It defines various cost elements and cost centers.
The document provides information on cost sheets, including their purpose and key components. A cost sheet shows the costs of production for an accounting period and breaks down total costs. It includes prime costs like direct materials, labor, and expenses. Factory costs incorporate prime costs and factory overheads. Administration costs add office overheads to factory costs. Selling and distribution costs include advertising, sales salaries, and transport costs. An example cost sheet is provided with sales, inventory, production, overhead, and expense figures.
The document discusses the classification of costs for manufacturing. It categorizes costs into three types: materials, labor, and expenses. Costs are also classified as either product costs, which are costs of manufacturing products, or period costs, which are charged to the income statement each period. Product costs include direct costs like direct materials, labor, and expenses as well as indirect costs like indirect materials, labor, and expenses. Period costs include administration, selling, distribution, research, and finance costs. The document also provides a cost sheet format and discusses concepts around material management.
The document discusses the components of a cost sheet, including direct costs, indirect costs, and calculations. It provides a sample cost sheet for a company producing 1 lakh units of bread. Direct costs include raw materials, direct labor, and direct expenses. Indirect costs include factory overheads, office administration overheads, and sales/distribution overheads. The cost sheet calculates costs per unit and totals for raw materials, labor, overheads, cost of production, sales, and profit.
This document provides an overview of cost accounting, including key definitions and concepts. It discusses:
1) Cost accounting identifies, measures, records, classifies, summarizes, interprets, and communicates the costs of manufacturing firms.
2) Costs are classified in various ways, including by relationship to products (direct vs indirect), behavior (fixed vs variable), and traceability.
3) Job order costing is used when products are made to customer order. It accumulates costs by job and uses a work in process account for each job.
The document provides an introduction to cost accounting concepts including definitions of costing, cost accounting, and cost accountancy. It discusses the elements of cost including direct and indirect materials, direct and indirect labor, and direct and indirect expenses. It also defines key cost accounting terms like prime cost, factory cost, cost of production, and overhead. The document explains the treatment of various cost items and overhead and how they are classified and allocated.
The document discusses various aspects of classifying and defining costs. It defines direct costs as costs that can be traced to a specific cost object, like direct materials and direct labor. Indirect costs are costs that cannot be directly traced to a cost object, like manufacturing overheads. It provides examples of different types of direct and indirect costs such as direct materials, direct labor, indirect materials, and indirect labor. The document also discusses classifying costs by their nature into material, labor, and expenses costs. It defines various cost elements and cost centers.
The document provides information on cost sheets, including their purpose and key components. A cost sheet shows the costs of production for an accounting period and breaks down total costs. It includes prime costs like direct materials, labor, and expenses. Factory costs incorporate prime costs and factory overheads. Administration costs add office overheads to factory costs. Selling and distribution costs include advertising, sales salaries, and transport costs. An example cost sheet is provided with sales, inventory, production, overhead, and expense figures.
This document provides information about a cost accounting course offered by Cost Academy. It includes contact information for the academy, a list of topics to be covered in the course, and the number of classes required for each topic. The total number of classes for the full course is 44. It also includes the syllabus for the Group II Paper 4 exam on Cost Accounting and Financial Management, which will cover cost accounting for 50 marks and financial management for 50 marks over three hours.
The document discusses different types of costing methods used for specific industries, including job costing, batch costing, and contract costing. Job costing tracks costs for individual jobs or orders. Batch costing calculates total costs for batches of identical products. Contract costing treats each contract as a separate cost unit, tracking all direct and indirect costs associated with completing the contract. Overhead costs are typically a small percentage of total costs for contract work. Materials, labor, direct expenses, plant usage, and overhead costs are all tracked and allocated to the appropriate job, batch, or contract under each respective costing method.
Raw Materials Inventory at April 30 = $4,000
b. Direct labor hours.......................................................... 1,200
Direct labor rate per hour............................................... × $15
Direct Labor Cost
The document discusses cost classification and cost sheets. It describes various bases for classifying costs, such as by nature, relation to cost centers, function, behavior, time, controllability, and normality. It also explains the components and advantages of a cost sheet, including determining total cost, profit/loss, and aiding in price fixation and budget preparation. Cost sheets classify costs to calculate prime cost, works cost, cost of production, cost of sales, and profit.
This document discusses the basic concepts of cost and cost elements. It defines cost as the amount of expenditure incurred on a given thing. There are three main elements of cost: material, labor, and expenses. Material includes direct materials like raw materials and indirect materials used for maintenance. Labor includes direct labor involved in production and indirect labor. Expenses include direct expenses for a product and indirect expenses like rent and utilities. Overhead includes the indirect costs of materials, labor, and other expenses. Costs also vary in their nature between being fixed, variable, controllable, and non-controllable.
The document discusses the three basic elements of manufacturing costs: direct materials, direct labor, and factory overhead. Direct materials include all materials that become part of the finished product. Direct labor refers to personnel costs required for manufacturing. Factory overhead consists of all other costs required for manufacturing that do not fall into direct materials or labor, such as indirect labor, utilities, and depreciation. These three elements - direct materials, direct labor, and factory overhead - make up the total cost of production. Administrative and selling overheads are also discussed.
Financial accounting and management accounting are two branches of accounting that differ in their purpose and users. Financial accounting focuses on preparing financial statements for external users to provide a fair view of the company's financial position. Management accounting aims to provide both qualitative and quantitative information to internal managers to assist with decision making, planning, and controlling operations. While financial accounting follows accounting principles and standards to prepare standardized financial reports, management accounting is flexible and customized based on management's needs.
The document discusses the classification and elements of cost. It classifies costs according to nature, function, identifiability, behavior, association with products, controllability, normality, time, and relevance. Specifically, it breaks down costs by their nature or elements into direct and indirect materials costs, direct and indirect labor costs, and direct and indirect expenses costs. It defines overheads as the aggregate of indirect material cost, indirect labor cost, and indirect expenses.
Differentiate between cost sheet, cost statement andlmondal810
This document defines and compares cost sheet, statement of cost, and production account. A cost sheet calculates total and per unit costs to determine product costs, while a statement of cost calculates total costs without per unit costs. A production account shows production costs in a double-entry format and calculates per unit costs. Key differences are that cost sheets calculate per unit costs and allow comparisons, while statements of cost do not, and production accounts use double-entry bookkeeping while cost sheets do not.
The objective of the ppt of Elements of Costs and classification of expenditure is to have precise information, especially for the non commerce management students. I believe this would help them to understand the subject easily.
This document discusses various costing concepts and techniques including:
BY Dinesh Makani
For Private Circulation Only
Page 9
ORIENTAL
Accounting
Cost & Management
1. The meaning and elements of cost, components of total cost including prime cost, factory cost, and total cost of production.
2. The meaning and importance of cost sheets for ascertaining cost, fixing selling prices, cost control, and managerial decision making.
3. Other costing methods like contract costing, process costing, and marginal costing - discussing their key principles, uses, and differences between job order costing and process costing.
This document provides information about an accounting course titled "Accounting for Business Decisions". It outlines the course objectives, topics to be covered, and components of a cost sheet. The objectives are to understand financial, cost, and management accounting and how they can facilitate decision making. Key topics to be covered include cost sheets, cost components, and cost accounting principles. The components of a cost sheet are defined as direct material, direct labor, direct expenses, and overhead costs.
This document discusses various concepts related to cost accounting, including definitions of cost, classifications of costs, elements of cost, and overhead costs. It defines direct and indirect costs, fixed and variable costs, and classifications like prime cost, factory overhead, administrative overhead, and selling overhead. It provides examples and explanations of different types of costs like material, labor, expenses that make up the total cost of production and sales. The document is intended to provide a comprehensive overview of fundamental cost accounting concepts.
1. The document discusses process costing used by Volant Textile Mills Ltd, an Indian textile manufacturer. It describes the key processes in textile manufacturing - spinning, weaving, dyeing/printing, and finishing.
2. It provides process accounts for 3 manufacturing processes at Volant Textile Mills, showing costs allocated and units transferred between processes.
3. Volant Textile Mills was established in 1993 and manufactures cotton and bleached grey fabrics for export markets. It has expanded production capacity over time through additional machinery investments.
The document provides information about cost sheets, including:
1) A cost sheet is a statement that shows the various components of the total cost of a product by classifying and analyzing costs. It helps ascertain costs, fix selling prices, and facilitate managerial decisions.
2) The components of total cost shown on a cost sheet include prime cost (direct materials, direct wages, direct expenses) and factory cost (prime cost plus factory overheads like indirect materials, wages, expenses).
3) Historical cost sheets are prepared based on actual incurred costs, while estimated cost sheets use forecasted costs and help set tender prices for jobs before production begins.
Direct materials used, direct labor cost, prepare statement of wip, prepare income statement. The document provides information on materials purchased and on hand at the beginning and end of the year, as well as direct labor hours worked and costs. It requests the calculation of direct materials used, direct labor cost, and the preparation of a statement of work in process and income statement.
This document provides information on single or output costing including its meaning, utility, costing procedure, elements of cost, components of total cost, cost sheet format and examples. Single or output costing is used when production is uniform, continuous and units produced are identical. It involves determining prime cost, factory cost, total cost and cost per unit. A cost sheet systematically presents various cost elements and is useful
This document provides an introduction to accounting concepts related to cost. It defines cost accounting as recording and summarizing financial transactions and events in terms of money. It also discusses the different types of accounting, including financial accounting which publishes reports for external users, and management accounting which provides information to managers for decision making. Finally, it outlines the key steps in calculating cost of goods manufactured and cost of goods sold.
Cost classifications are used for four main purposes: preparing external financial statements, predicting cost behavior, assigning costs to cost objects, and making decisions. For financial statements, costs are classified as either product costs (recognized as assets until goods are sold) or period costs (expensed in the period incurred). Direct costs can be traced to specific cost objects, while indirect costs cannot. Variable costs change with activity level, while fixed costs remain constant. Only differential costs that differ between alternatives are relevant for decision making.
This document provides information about a cost accounting course offered by Cost Academy. It includes contact information for the academy, a list of topics to be covered in the course, and the number of classes required for each topic. The total number of classes for the full course is 44. It also includes the syllabus for the Group II Paper 4 exam on Cost Accounting and Financial Management, which will cover cost accounting for 50 marks and financial management for 50 marks over three hours.
The document discusses different types of costing methods used for specific industries, including job costing, batch costing, and contract costing. Job costing tracks costs for individual jobs or orders. Batch costing calculates total costs for batches of identical products. Contract costing treats each contract as a separate cost unit, tracking all direct and indirect costs associated with completing the contract. Overhead costs are typically a small percentage of total costs for contract work. Materials, labor, direct expenses, plant usage, and overhead costs are all tracked and allocated to the appropriate job, batch, or contract under each respective costing method.
Raw Materials Inventory at April 30 = $4,000
b. Direct labor hours.......................................................... 1,200
Direct labor rate per hour............................................... × $15
Direct Labor Cost
The document discusses cost classification and cost sheets. It describes various bases for classifying costs, such as by nature, relation to cost centers, function, behavior, time, controllability, and normality. It also explains the components and advantages of a cost sheet, including determining total cost, profit/loss, and aiding in price fixation and budget preparation. Cost sheets classify costs to calculate prime cost, works cost, cost of production, cost of sales, and profit.
This document discusses the basic concepts of cost and cost elements. It defines cost as the amount of expenditure incurred on a given thing. There are three main elements of cost: material, labor, and expenses. Material includes direct materials like raw materials and indirect materials used for maintenance. Labor includes direct labor involved in production and indirect labor. Expenses include direct expenses for a product and indirect expenses like rent and utilities. Overhead includes the indirect costs of materials, labor, and other expenses. Costs also vary in their nature between being fixed, variable, controllable, and non-controllable.
The document discusses the three basic elements of manufacturing costs: direct materials, direct labor, and factory overhead. Direct materials include all materials that become part of the finished product. Direct labor refers to personnel costs required for manufacturing. Factory overhead consists of all other costs required for manufacturing that do not fall into direct materials or labor, such as indirect labor, utilities, and depreciation. These three elements - direct materials, direct labor, and factory overhead - make up the total cost of production. Administrative and selling overheads are also discussed.
Financial accounting and management accounting are two branches of accounting that differ in their purpose and users. Financial accounting focuses on preparing financial statements for external users to provide a fair view of the company's financial position. Management accounting aims to provide both qualitative and quantitative information to internal managers to assist with decision making, planning, and controlling operations. While financial accounting follows accounting principles and standards to prepare standardized financial reports, management accounting is flexible and customized based on management's needs.
The document discusses the classification and elements of cost. It classifies costs according to nature, function, identifiability, behavior, association with products, controllability, normality, time, and relevance. Specifically, it breaks down costs by their nature or elements into direct and indirect materials costs, direct and indirect labor costs, and direct and indirect expenses costs. It defines overheads as the aggregate of indirect material cost, indirect labor cost, and indirect expenses.
Differentiate between cost sheet, cost statement andlmondal810
This document defines and compares cost sheet, statement of cost, and production account. A cost sheet calculates total and per unit costs to determine product costs, while a statement of cost calculates total costs without per unit costs. A production account shows production costs in a double-entry format and calculates per unit costs. Key differences are that cost sheets calculate per unit costs and allow comparisons, while statements of cost do not, and production accounts use double-entry bookkeeping while cost sheets do not.
The objective of the ppt of Elements of Costs and classification of expenditure is to have precise information, especially for the non commerce management students. I believe this would help them to understand the subject easily.
This document discusses various costing concepts and techniques including:
BY Dinesh Makani
For Private Circulation Only
Page 9
ORIENTAL
Accounting
Cost & Management
1. The meaning and elements of cost, components of total cost including prime cost, factory cost, and total cost of production.
2. The meaning and importance of cost sheets for ascertaining cost, fixing selling prices, cost control, and managerial decision making.
3. Other costing methods like contract costing, process costing, and marginal costing - discussing their key principles, uses, and differences between job order costing and process costing.
This document provides information about an accounting course titled "Accounting for Business Decisions". It outlines the course objectives, topics to be covered, and components of a cost sheet. The objectives are to understand financial, cost, and management accounting and how they can facilitate decision making. Key topics to be covered include cost sheets, cost components, and cost accounting principles. The components of a cost sheet are defined as direct material, direct labor, direct expenses, and overhead costs.
This document discusses various concepts related to cost accounting, including definitions of cost, classifications of costs, elements of cost, and overhead costs. It defines direct and indirect costs, fixed and variable costs, and classifications like prime cost, factory overhead, administrative overhead, and selling overhead. It provides examples and explanations of different types of costs like material, labor, expenses that make up the total cost of production and sales. The document is intended to provide a comprehensive overview of fundamental cost accounting concepts.
1. The document discusses process costing used by Volant Textile Mills Ltd, an Indian textile manufacturer. It describes the key processes in textile manufacturing - spinning, weaving, dyeing/printing, and finishing.
2. It provides process accounts for 3 manufacturing processes at Volant Textile Mills, showing costs allocated and units transferred between processes.
3. Volant Textile Mills was established in 1993 and manufactures cotton and bleached grey fabrics for export markets. It has expanded production capacity over time through additional machinery investments.
The document provides information about cost sheets, including:
1) A cost sheet is a statement that shows the various components of the total cost of a product by classifying and analyzing costs. It helps ascertain costs, fix selling prices, and facilitate managerial decisions.
2) The components of total cost shown on a cost sheet include prime cost (direct materials, direct wages, direct expenses) and factory cost (prime cost plus factory overheads like indirect materials, wages, expenses).
3) Historical cost sheets are prepared based on actual incurred costs, while estimated cost sheets use forecasted costs and help set tender prices for jobs before production begins.
Direct materials used, direct labor cost, prepare statement of wip, prepare income statement. The document provides information on materials purchased and on hand at the beginning and end of the year, as well as direct labor hours worked and costs. It requests the calculation of direct materials used, direct labor cost, and the preparation of a statement of work in process and income statement.
This document provides information on single or output costing including its meaning, utility, costing procedure, elements of cost, components of total cost, cost sheet format and examples. Single or output costing is used when production is uniform, continuous and units produced are identical. It involves determining prime cost, factory cost, total cost and cost per unit. A cost sheet systematically presents various cost elements and is useful
This document provides an introduction to accounting concepts related to cost. It defines cost accounting as recording and summarizing financial transactions and events in terms of money. It also discusses the different types of accounting, including financial accounting which publishes reports for external users, and management accounting which provides information to managers for decision making. Finally, it outlines the key steps in calculating cost of goods manufactured and cost of goods sold.
Cost classifications are used for four main purposes: preparing external financial statements, predicting cost behavior, assigning costs to cost objects, and making decisions. For financial statements, costs are classified as either product costs (recognized as assets until goods are sold) or period costs (expensed in the period incurred). Direct costs can be traced to specific cost objects, while indirect costs cannot. Variable costs change with activity level, while fixed costs remain constant. Only differential costs that differ between alternatives are relevant for decision making.
Classification of costs is important for determining, analyzing, and controlling costs. There are various methods of classifying costs, including by elements, functions, identifiability, behavior, and controllability. Costs can be classified as material costs (direct and indirect materials), labor costs (direct and indirect labor), and other expenses (direct and indirect expenses). Overheads include indirect materials, labor, and other expenses. Certain items like financial incomes/charges, appropriations, and abnormals are excluded from cost sheets.
Manufacturing accounts by inqilab patelInqilab Patel
In order to ascertain the cost of producing the goods a manufacturing account is prepared. This account is also normally prepared at the end of the accounting period. Both direct and indirect expenses associated with the manufacturing process debited to the manufacturing account. The balance of this account representing cost of the goods produced is then transferred to the trading account.
The document discusses costing and pricing methods for a cooperative. It provides information on calculating costs, including material costs, labor costs, expenses, overhead, and the different components and types of costs. The document then outlines 10 steps for costing products, which include calculating raw materials, labor expenses, direct and indirect costs, total product cost, producer's price, and retail price. It discusses working backwards from the retail price to determine the ex-works or FOB price. The goal is to help the cooperative assess its current pricing practices and implement improved costing and pricing methods.
This document discusses ways to reduce production costs in a manufacturing business. It begins by defining manufacturing and production costs, which include direct material costs, direct labor costs, and manufacturing overheads. It then provides examples of calculating production costs and provides several techniques to reduce costs, including tracking production metrics, reducing direct material and inventory carrying costs, improving workforce efficiency, controlling overheads, eliminating non-value-adding processes, leveraging automation, optimizing production levels, reducing waste, and implementing control systems. The key recommendations are to track costs closely, negotiate lower material prices, optimize inventory levels, and control overhead spending.
This document discusses absorption costing and overhead allocation. It defines overheads as indirect costs that cannot be directly traced to products or departments. It explains that absorption costing shares overheads between products on a fair basis using allocation, apportionment, and absorption. Various overhead categories and cost centers are described. Methods for allocating and reapportioning overhead like direct and step-down methods are covered. Finally, it discusses determining predetermined overhead rates and absorbing overhead into production costs.
The Changing Role of Managerial Accounting in a GLOBAL Business EnvironmentAbdullah Rabaya
This document discusses basic cost management concepts and accounting for mass customization operations. It defines key cost terms like product costs, period costs and expenses. It also describes how costs are classified on financial statements and provides examples of manufacturing costs like direct material, direct labor and manufacturing overhead. The document shows schedules for calculating cost of goods manufactured and sold. It includes an example income statement for a manufacturer to illustrate how costs flow through the financial statements.
- The document presents Cost Accounting Standard 4 (CAS-4) on determining the cost of production for goods used for captive consumption in India.
- Captive consumption refers to when one division of a company consumes goods manufactured by another division to make another product. The cost of production is used to determine the assessable value for excise duty purposes.
- CAS-4 provides guidelines for calculating cost of production including material consumed, direct wages, overheads, research costs, and includes adjustments for opening and closing work-in-progress and finished goods inventory. It aims to bring uniformity to how companies determine cost of production for goods used captive consumption.
Unit or output costing is used when standard products are produced through a common process and units are similar. A cost sheet is prepared to show the detailed cost of total output for a period. It assembles estimated costs for a cost center and helps management fix selling prices, submit tenders, and formulate production policies by providing cost per unit. A cost sheet calculates prime cost as direct materials + direct labor + direct expenses, then adds factory overheads for works cost, office expenses for cost of production, and selling/distribution costs for total cost.
1. The document discusses cost elements such as direct costs, indirect costs, fixed costs, and variable costs. It explains how to classify and structure costs.
2. Cost accounting is described as the historical reporting of costs including recording, classifying, and summarizing costs. Code of accounts is used to classify recorded cost elements.
3. Materials, labor, pricing, and cost management techniques like estimating and cost trending are also covered in the summary.
Join for crypto trading and investing.
https://wazirx.com/invite/my7upc65
Detailed Presentation on cost analysis including:
01 INTRODUCTION TO COST ANALYSIS
02 COST CONCEPT AND ITS TYPES
03 BRIEF OVERVIEW OF THE TYPES
04 PRODUCTION COSTS
05 DETERMINANTS OF COSTS
By: Archit Aditya
Follow
Instagram:https://www.instagram.com/architavi01
Linkedin:https://www.linkedin.com/in/archit-aditya-557958128
Youtube:https://www.youtube.com/starorganization
Blog:https://astarfuturistic.blogspot.com
Pinterest:https://pinterest.com/architaditya
This document provides an overview of cost estimation and costing. It defines estimation as calculating expected costs before production, while costing determines actual costs after production. The key stages of estimating procedure are discussed, including determining design, materials, labor, overhead costs, and profit. Objectives of estimating include establishing policies and prices. Factory overheads, administrative expenses, and selling expenses are also explained. Methods of costing and important elements of cost like materials, labor, and expenses are outlined.
This document defines and explains the components of a manufacturing account. A manufacturing account is prepared internally and divides costs into various types: direct materials, direct labor, direct expenses, indirect manufacturing costs, administration expenses, selling/distribution expenses, and financial charges. Direct costs can be traced to specific products while indirect costs cannot. The manufacturing account shows prime cost and production cost. It is then combined with other financial statements to form the income statement, which includes gross profit and deducts other expenses to arrive at net profit. An example manufacturing account and activity is provided to demonstrate the concepts.
This document discusses overhead absorption and absorption costing. It begins by defining overhead absorption as the amount of indirect costs assigned to cost objects. It then outlines the steps in overhead absorption, which include classifying indirect costs, aggregating costs into cost pools, determining allocation bases, and assigning overhead. The document contrasts absorption costing with variable costing and explains how absorption costing complies with GAAP by including fixed overhead costs in inventory valuation. It provides an example of calculating overhead absorption rates for a company. Big companies like Tesla also use overhead absorption to allocate indirect production costs. Under- or over-absorption of overhead can occur if actual overhead costs differ from estimated costs or output levels.
The document defines several types of costs related to production including:
1) Money cost, which is the amount spent in money terms for production.
2) Real cost, which includes mental and physical sacrifices made during production.
3) Explicit cost, which are actual cash payments made for factor and non-factor inputs.
4) It also distinguishes between fixed costs that remain constant regardless of output, and variable costs that vary with output. Total cost is the sum of fixed and variable costs.
This document discusses different types of costs related to production. It defines money cost, nominal cost, real cost, opportunity cost, implicit cost, explicit cost, accounting cost, social cost, and entrepreneur's cost. It also covers classification of costs, elements of costs, short-run costs including fixed, variable, total, average and marginal costs. Finally, it discusses long-run cost curves including long-run average cost and long-run marginal cost curves.
1. 1
CLASSIFICATION OF COSTS: Manufacturing
We first classify costs according to the three elements of cost:
a) Materials b) Labour c) Expenses
Product and Period Costs: We also classify costs as either
1 Product costs: the costs of manufacturing our products; or
2 Period costs: these are the costs other than product costs that are charged to,
debited to, or written off to the income statement each period.
The classification of Product Costs:
Direct costs: Direct costs are generally seen to be variable costs and they are called
direct costs because they are directly associated with manufacturing. In turn, the
direct costs can include:
• Direct materials: plywood, wooden battens, fabric for the seat and the back,
nails, screws, glue.
• Direct labour: sawyers, drillers, assemblers, painters, polishers, upholsterers
• Direct expense: this is a strange cost that many texts don't include; but
(International Accounting Standard) IAS 2, for example, includes it. Direct
expenses can include the costs of special designs for one batch, or run, of a
particular set of tables and/or chairs, the cost of buying or hiring special
machinery to make a limited edition of a set of chairs.
Total direct costs are collectively known as Prime Costs and we can see that
Product Costs are the sum of Prime costs and Overheads.
Indirect Costs: Indirect costs are those costs that are incurred in the factory but that
cannot be directly associate with manufacture. Again these costs are classified
according to the three elements of cost, materials labour and overheads.
• Indirect materials: Some costs that we have included as direct materials
would be included here.
• Indirect labour: Labour costs of people who are only indirectly associated
with manufacture: management of a department or area, supervisors,
cleaners, maintenance and repair technicians
• Indirect expenses: The list in this section could be infinitely long if we were
to try to include every possible indirect cost. Essentially, if a cost is a factory
cost and it has not been included in any of the other sections, it has to be an
indirect expense. Here are some examples include:
Depreciation of equipment, machinery, vehicles, buildings
Electricity, water, telephone, rent, Council Tax, insurance
2. 2
Total indirect costs are collectively known as Overheads.
Finally, within Product Costs, we have Conversion Costs: these are the costs
incurred in the factory that are incurred in the conversion of materials into finished
goods.
The classification of Period Costs:
The scheme shows five sub classifications for Period Costs. When we look
at different organisations, we find that they have period costs that might have sub
classifications with entirely different names. Unfortunately, this is the nature of the
classification of period costs; it can vary so much according to the organisation, the
industry and so on. Nevertheless, such a scheme is useful in that it gives us the basic
ideas to work on.
Administration Costs: Literally the costs of running the administrative aspects of an
organisation. Administration costs will include salaries, rent, Council Tax,
electricity, water, telephone, depreciation, a potentially infinitely long list. Notice
that there are costs here such as rent, Council Tax, that appear in several sub
classifications; in such cases, it should be clear that we are paying rent on buildings,
for example, that we use for manufacturing and storage and administration and each
area of the business must pay for its share of the total cost under review.
Without wishing to overly extend this listing now, we can conclude this
discussion by saying that the costs of Selling, the costs of Distribution and the costs
of Research are all accumulated in a similar way to the way in which Administration
Costs are accumulated. Consequently, our task is to look at the selling process and
classify the costs of running that process accordingly: advertising, market research,
salaries, bonuses, electricity, and so on. The same applies to all other classifications
of period costs that we might use.
Finance Costs: Finance costs are those costs associated with providing the
permanent, long term and short term finance. That is, within the section headed
finance costs we will find dividends, interest on long term loans and interest on short
term loans.
Finally, we should say that we can add any number of subclassifications to
our scheme if we need to do that to clarify the ways in which our organisation
operates. We will also add further subclassifications if we need to refine and further
refine out cost analysis.
3. 3
COST SHEET – FORMAT
Particulars Amount Amount
Opening Stock of Raw Material ***
Add: Purchase of Raw materials ***
Add: Purchase Expenses ***
Less: Closing stock of Raw Materials ***
Raw Materials Consumed ***
Direct Wages (Labour) ***
Direct Charges ***
Prime cost (1) ***
Add :- Factory Over Heads:
Factory Rent ***
Factory Power ***
Indirect Material ***
Indirect Wages ***
Supervisor Salary ***
Drawing Office Salary ***
Factory Insurance ***
Factory Asset Depreciation ***
Works cost Incurred ***
Add: Opening Stock of WIP ***
Less: Closing Stock of WIP ***
Works cost (2) ***
Add:- Administration Over Heads:-
Office Rent ***
Asset Depreciation ***
General Charges ***
Audit Fees ***
Bank Charges ***
Counting house Salary ***
Other Office Expenses ***
Cost of Production (3) ***
Add: Opening stock of Finished Goods ***
Less: Closing stock of Finished Goods ***
Cost of Goods Sold ***
Add:- Selling and Distribution OH:-
Sales man Commission ***
Sales man salary ***
Traveling Expenses ***
Advertisement ***
Delivery man expenses ***
Sales Tax ***
4. 4
Bad Debts ***
Cost of Sales (5) ***
Profit (balancing figure) ***
Sales ***
Notes:-
1) Factory Over Heads are recovered as a percentage of direct wages
2) Administration Over Heads, Selling and Distribution Overheads are recovered as
a percentage of works cost.
5. 5
MATERIAL
1) Reorder level = Maximum usage * Maximum lead time
(Or) Minimum level + (Average usage * Average Lead time)
2) Minimum level = Reorder level – (Average usage * Average lead time)
3) Maximum level = Reorder level + Reorder quantity – (Minimum usage *
Minimum lead time)
4) Average level = Minimum level +Maximum level (or)
2
Minimum level + ½ Reorder quantity
5) Danger level (or) safety stock level
=Minimum usage * Minimum lead time (preferred)
(or) Average usage * Average lead time
(or) Average usage * Lead time for emergency purposes
6) EOQ (Economic Order Quantity - Wilson’s Formula) = √2AO/C
Where A = Annual usage units
O = Ordering cost per unit
C = Annual carrying cost of one unit
i.e. Carrying cast % * Carrying cost of unit
7) Associated cost = Buying cost pa + Carrying cost pa
8) Under EOQ Buying cost = Carrying cost
9) Carrying Cost = Average inventory * Carrying cost per unit pa * Carrying cost %
(Or) Average Inventory * Carrying cost per order pa
10) Average inventory = EOQ/2
11) Buying cost = Number of Orders * ordering cost
12) Number of Orders = Annual Demand / EOQ
13) Inventory Turnover (T.O) Ratio = Material consumed
Average Inventory
14) Inventory T.O Period = 365 .
Inventory Turn over Ratio
6. 6
15) safety stock = Annual Demand *(Maximum lead time - Average lead time)
365
16) Total Inventory cost = Ordering cost + Carrying cost of inventory +Purchase cost
17) Input Output Ratio = Quantity of input of material to production
Standard material content of actual output
Remarks :-
1) High Inventory T.O Ratio indicates that the material in the question is fast moving
2) Low Inventory T.O Ratio indicates over investment and locking up of working
Capital in inventories
Pricing of material Issues:-
1) Cost price method:-
a) Specific price method
b) First in First Out method (FIFO)
c) Last in First Out method (LIFO)
d) Base stock method
2) Average price method:-
a) Simple average price method = Total unit price
Total No. of purchases
b) Weighted average price method = Total cost
Total No. of units
c) Periodic simple average price method = Total unit price of certain period
Total Number of purchases of that period
(This rate is used for all issues for that period. Period means a month (or) week (or)
year)
d) Periodic weighted average price method = Total cost of certain period
Total Number of units of that period
e) Moving simple average price method
= Total of periodic simple average of certain number of periods
Number of periods
7. 7
f) Moving weighted average price method
= Total of periodic weighted average of certain number of periods
Number of periods
3) Market price method:-
a) Replacement price method = Issues are valued as if it was purchased now at
current market price
b) Realizable price method = Issues are valued at price if it is sold now
4) Notional price method:-
a) Standard price method = Materials are priced at pre determined rate (or)
Standard rate
b) Inflated price method = The issue price is inflated to cover the losses incurred
due to natural(or)climatic losses
5) Re use price method = When materials are returned (or) rejected it is valued at
different price. There is no final procedure for this method.
ABC Analysis (or) Pareto Analysis :- In this materials are categorized into
Particulars Quantity Value
“A” – Important material 10% 70%
“B” – Neither important nor unimportant 20% 20%
“C” – UN Important 70% 10%
Note:-
1) Material received as replacement from supplier is treated as fresh supply
2) If any material is returned from Department after issue, it has to be first
disposed in the next issue of material
3) loss in the book balance of stock and actual is to be transferred to Inventory
adjustment a/c and from there if the loss is normal it is transferred to Over Head
control a/c. If it is abnormal it is transferred to costing profit and loss a/c.
4) CIF = Cost Insurance and Freight (This consignment is inclusive of prepaid
insurance and freight)
8. 8
5) FOB = Free on Board (Materials moving by sea – insurance premium is not
paid)
6) FOR = Free on Rail (Insurance and freight is not borne by the supplier but paid
by the company or purchase)
7) For each receipt of goods = Goods Receipt note
8) For each issue of goods = Materials Requisition note (or) Material Issue note
Accounting Treatment :-
1) Normal Wastage = It should be distributed over goods output increasing per unit
cost
2) Abnormal Wastage= It will be charged to costing profit and loss a/c
3) Sale value of scrap is credited to costing profit and loss a/c as an abnormal gain.
4) Sale proceeds of the scrap can be deducted from material cost or factory
overheads.
5) Sale proceeds of scrap may be credited to particular job.
6) Normal Defectives = cost of rectification of defectives should be charged to
specific
7) Abnormal Defectives = This should be charged to costing profit and loss a/c
8) Cost of Normal spoilage is to borne by good units
9) Abnormal spoilage should be charged to costing profit and loss a/c
9. 9
LABOUR
Method of Remuneration:
1) Time Rate system
a) Flat time Rate
b) High wage system
c) Graduated time rate
2) Payment by Results
a) Piece rate system
i) Straight piece rate
ii) Differential piece rate
• Taylor system
• Merrick system
b) Group Bonus System
i) Budgeted Expenses
ii) Towne gain sharing scheme
iii) Cost efficiency bonus
iv) Priest man system
c) Combination of Time and Piece rate
i) Gantt task and Bonus scheme
ii) Emerson Efficiency system
iii) Point scheme
• Bedaux system
• Haynes manit system
d) Premium bonus plans
i) Halsey premium plan
ii) Halsey weir premium plan
iii) Rowan scheme
iv) Barth scheme
v) Accelerating premium bonus scheme
e) Other incentive schemes
i) Indirect monetary incentive
• Profit sharing
• Co-partnership
ii) Non-Monetary Incentive
10. 10
1) Time rate system = Hours worked * Rate per hour (Basic wages)
2) Piece rate system:
i) Straight piece rate earnings = Number of units produced * Rate per unit
ii) Differential Piece rate
a) F.W.Taylor’s differential rate system
» 83% of piece rate when below standard
» 125% of piece rate when above or at standard
b) Merrick differential or multiple piece rate system
Efficiency level Piece rate
» up to 83% »Normal piece rate
» 83% to 100% » 110% of Normal rate
» Above 100% » 120% of Normal rate
iii) Gantt Task and Bonus system
Output Payment
» Below standard » Time rate (guaranteed)
» At standard » 20% Bonus of Time rate
» Above standard » 120% of ordinary piece rate
iv) Emerson’s Efficiency system
Efficiency Payment
» Below 66.7% » Hourly Rate
» from 66.7% » Hourly rate (+) increasing bonus according to degree
to 100% of efficiency on the basis of step bonus rates
» Above 100% » Hourly rate (+) 20% Bonus (+) additional bonus of 1%
of hourly rate for every 1% increase in efficiency
v) Halsey Premium Plan = Basic wages + 50% of time saved * Hourly Rate
vi) Halsey Weir Premium Plan = Basic wages + 30% of time saved * Hourly rate
vii) Rowan Plan = Basic wages + Time saved * Basic Wages
Time allowed
viii) Bedaus Point system = Basic wages + 75% * Bedaus point/60 * Rate/hr
11. 11
ix) Barth’s System = Hourly rate * √Std time *Time taken
Labour Turnover:-
1) Separation rate method = Separation during the period
Average No. of worker’s during the period
2) Net labour T.O rate (or) Replacement method
= Number of replacements
Average No. of worker’s during the period
3) Labour flux rate = No. of separation + No. of replacement
Average No. of worker’s during the period
Accounting Treatment
1) Normal Idle time = Charged to factory overheads
2) Normal but un-controllable = It should be charged to job by inflating wage rate.
3) Abnormal = It should be charged to costing P & L a/c
12. 12
OVER HEADS
Reapportionment of service department expenses over production department :-
1) Direct redistribution method:
• Service department costs are divided over production department.
• Ignore service rended by one dept. to another
2) Step method of secondary distribution (or) Non reciprocal method:
• Service department which serves largest number of service department is
divided first and go on.
3) Reciprocal service method:
i) Simultaneous equation method (or) Algebraic method
• Equation is formed between service departments and is solved to find the
amount due.
ii) Repeated distribution method:
• Service department cost separated repeatedly till figure of service dept. is
exhausted or too small.
iii) Trial and Error method:
• Cost of service department is apportioned among them repeatedly till the
amount is negligible and the total is divided among production department.
Treatment of Over/Under absorption of overheads:-
i) If under absorbed and over absorbed overheads are of small value then it should be
transferred to costing profit and loss a/c
ii) If under and over absorption occurs due to wrong estimates then cost of product
manufactured should be adjusted accordingly.
iii) If the same accrued due to same abnormal reasons the same should be transferred
to costing profit & loss a/c
Apportionment of overhead expenses – Basis
a) Stores service expenses = Value of materials consumed
b) Factory rent = Floor area
13. 13
c) Municipal rent, rates and taxes = floor area
d) Insurance on Building and machinery = Insurable value
e) Welfare department expenses
f) Supervision
Number of employees
g Amenities to employee’s
)
h Employees liability for insurance
)
j) Lighting power = Plug point
k) Stores over heads = Direct material
l) General over heads = Direct wages
Reapportionment of service department cost to production department :-
1) Maintenance dept. = Hours worked for each dept.
2) Pay roll and time keeping = Total labour (or) machine hours (or) Number of
employees in each department
3) Employment (or) Personnel department = Rate of labour T.O (or) No. of
employees of each department
4) Stores Keeping department = No. of requisitions (or) value of materials of each
department
5) Purchase department = No. of purchase orders value of materials of each
department
6) Welfare, ambulance, canteen, service, recreation room expenses
= No. of employees in each department.
7) Building service department = Relative area each dept.
8) Internal transport service (or) overhead crane service
= weight, value graded product handled, weight and distance traveled.
14. 14
9) Transport department = Crane hours, truck hours, truck mileage,
Number of packages.
10) Power house (electric power cost) = Housing power, horse power machine hours,
No. of electric points etc.
11) Power house = Floor area, cubic content.
15. 15
RECONCILATION OF COST AND FINANCIAL A/C
Causes of differences:-
1) Purely financial items :
i) Appropriation of profits ►Transferred to reserves, goodwill, preliminary
expenses, dividend paid etc.
ii) Loss on sale of investment, penalties and fines
iii) Income ► Interest received on Bank deposits, profit on sale of investments,
fixed assets, transfer fees.
2) Purely cost account items: - Notional Rent / Interest / Salary
3) Valuation of stock:-
i) Raw-material = In financial a/c’s stock is valued at cost or market value
Whichever is less, while in cost a/c’s it is valued at LIFO, FIFO
etc.
ii) Work in progress = In financial a/c’s administrative expenses are also
considered while valuing stock, but in cost a/c’s it may be
valued at prime (or) factory cost (or) cost of production
iii) Finished Goods = In financial a/c’s it is valued at cost or market price
whichever is less, in cost a/c’s it is valued at total cost of production.
4) Overheads: In financial = Actual expenses are taken
In cost = Expenses are taken at predetermined rate.
5) Depreciation: In financial = Charged in diminishing or fixed balance method
In cost = Charged in machine hour rate
6) Abnormal Gains: In financial = Taken to profit & Loss a/c
In cost = Excluded to cost a/c’s or charged in costing
profit & Loss a/c
16. 16
JOB AND BATCH COSTING
With job costing, we are dealing with one off situations. We are dealing with
organisations that carry out functions and services on a one at a time basis. Good
examples of job costing situations include jobbing builders: the builder who will
provide a householder, or a shop owner, or a factory owner with a service that he
provides for no one else. The jobbing builder will build an extension, or renovate
some property to a design that will probably not be copied anywhere else at any
time: it is a one off job. Job costing can apply in non manufacturing situations as
well as in manufacturing situations.
Even though many jobbing enterprises are small scale, we are not suggesting
that all jobbing enterprises are small scale enterprises. An engineering shop may be
working on a job for a customer that takes several months and many man and
machine hours to complete.
Here are two definitions:
A job is “A customer order or task of relatively short duration”
Job costing is “A form of specific order costing; the attribution of cost to jobs”
Batch costing is not normally seen as much of an advance on job costing.
A batch is A group of similar articles which maintains its identity throughout
one or more stages of production and is treated as a cost unit Batch costing is A form
of specific order costing; the attribution of costs to batches.
Economic Batch Quantity = EBQ = √2AS/C
Where A = Annual Demand
S = Setting up cost per batch
C= Carrying cost / unit of production.
17. 17
PROCESS COSTING
Format of process a/c
Particulars Unit Rate Rs. Particulars Unit Rate Rs.
To Direct material By Normal Loss
To Direct Labour By Units transferred
To Indirect material to other process
To Other Expenses By Abnormal loss
(B/F)
To Abnormal gain(B/F)
Total Total
Format of Abnormal loss
Particulars Unit Rs. Particulars Unit Rs.
To Process a/c By Sale of wasted
units
By costing P & L a/c
Total Total
Format of Abnormal gain a/c
Particulars Units Rs. Particulars Units Rs.
To Normal Loss a/c By Process a/c (names of different
To costing P&la/c process)
Total Total
1)To find the cost per unit for valuation of units to be trans. to next process and also
for abnormal, loss or gain = Total process cost – Salvage value of normal spoilage
Total units introduced – Normal loss in units
2) To find abnormal loss (or) gain (all in units):
= Units from previous process + fresh units introduced – Normal loss – units
transferred to next process (If the result is positive then abnormal loss. If
negative then abnormal gain)
3) In case of opening WIP and closing WIP are given then there are different
methods of valuation of closing WIP
i) FIFO Method ii) LIFO Method
iii) Average Method iv) Weighted Average Method
4) Various statements to be prepared while WIP is given:
18. 18
i) Statement of equivalent production
ii) Statement of cost
iii) Statement of apportionment of cost
iv) Process cost a/c
5) FIFO Method: In these method total units transferred to next process includes
full opening stock units and the closing stock includes the units
introduced during the process. In this method the cost incurred
during the process is assumed as to be used
a) First to complete the units already in process
b) Then to complete the newly introduced units
c) For the work done to bring closing inventory to given state of completion
6) LIFO Method = Cost incurred in process is used for:
a) First to complete newly introduced units
b) Then to complete units already in process in this method closing stock is
divided into two :
i) Units which represent opening stock but lie at the end of the period
ii) Newly introduced units in closing stock.
7) Average Method: In this method
a) No distinction is made between opening stock and newly introduced material.
b) In finding cost per unit, cost incurred for opening stock is also to be added with
current cost. (This addition is not done in LIFO & FIFO method as cost
incurred in that process is only taken)
8) Weighted average method: This method is only used when varied product in
processed through a single process. General procedure is adopted
here.
a) Statement of weighted average production should be prepared. Under this
statement output of each products is expressed in terms of points.
b) Cost of each type of product is computed on basis of Points.
Points of vital importance in case of Abnormal Gain / Loss:
a) Calculate cost per unit by assuming there is no abnormal loss / gain
b) Cost per unit arrived above should be applied for valuation of both abnormal
19. 19
Loss/gain units and output of the process.
c) Separate a/c for both abnormal loss/gain is to be prepared.
JOINT PRODUCT AND BY PRODUCT COSTING
Methods of apportioning joint cost over joint products :
1) Physical unit method = Physical base to measure (i.e.) output quantity is used to
separate joint cost. Joint cost can be separated on the basis of ratio of output
quantity. While doing this wastage is also to be added back to find total quantity.
2) Average unit cost method = In this method joint cost is divided by total units
Produced of all products and average cost per unit is arrived and is multiplied
With number of units produced in each product.
3) Survey method or point value method = Product units are multiplied by points or
weights and the point is divide on that basis.
4) Standard cost method = Joint costs are separated on the basis of standard cost set
for respective joint products.
5) Contribution margin method = Cost are divided into two categories (i.e.) variable
and fixed. Variable costs are separated on unit produced. Fixed on the basis of
contribution ratios made by different products.
6) Market value method:-
a) Market value at the point of separation: Joint cost to sales revenue percentage
is found which is called as multiplying factor = Joint cost * 100
Sales Revenue
• Joint cost for each product is apportioned by applying this % on sales revenue
of each product.
• Sales revenue = Sales Revenue at the point of separation.
• This method cannot be done till the sales revenue at the separation point is
given.
b) Market value after processing: Joint cost is apportioned on the basis of total
sales Value of each product after further processing.
c) Net Realizable value method = Form sales value following items are deducted
i) Estimated profit margin
20. 20
ii) Selling and distribution expenses if any included.
iii) Post split off cost
The resultant amount is net realizable value. Joint cost is apportioned on this
basis.
Bi-product → Method of accounting
• Treat as other income in profit and loss a/c
• Net Realizable value of Bi-product is reduced from cost of main product.
• Instead of standard process, Standard cost or comparative price or re-use
price is credited to joint process a/c.
21. 21
OPERATION COSTING
Service costing is “A cost accounting method concerned with establishing the costs
of services rendered”. Service costing is also applied within a manufacturing setting.
The Differences Between Product Costing and Service Costing?
• There may be very few, if any, materials to worry about
• Overheads will comprise the most significant portion of any costs of which,
labour costs may well comprise as much as 70%
No. Enterprise Cost per unit
1. Railways or bus companies Per passenger-kilometer
2. Hospital Per patient/day, per bed/day
3. Canteen Meals served , cups of tea
4. Water supply service Per 1000 gallons
5. Boiler House 1000 kg of steam
6. Goods Transport Per tonne km, quintal km
7. Electricity Boards Per kilowatt – hours
8. Road maintenance department Per mile or road maintenance
9. Bricks One thousand
10. Hotel Per room/day
In this various terms such as passenger km, quintal km, tonne km, these are
all known as composite units and are computed in 2 ways:
a) Absolute (weighted average): (e.g.) tones km - Multiplying total distance by
respective load quantity.
b) Commercial (simple average): (e.g.) tonne Km–Multiplying total distance by
average load quantity
All accumulated cost is classified into 3 categories:
1) Standing charges (or) fixed cost
2) Running cost (or) variable cost
3) Maintenance charges (or) semi variable cost
Running charges = Fuel, Driver Wages, Depreciation, oil etc.
Maintenance charges = Supervision salary, Repairs and Maintenance
22. 22
Note:-
• % of factory overheads on direct wages
• % of administration overheads on works cost
• % of selling & distribution overheads on works cost
• % of profit on sales
Operating cost sheet :-
Particulars Total cost Cost per km
A Standing charges :-
License fees
Insurance Premium
Road tax
Garage rent
Driver’s wages
Attendant-cum-cleaner’s wages
Salaries and wages of other staff
Total
B Running charges :-
Repairs and maintenance
Cost of fuel (diesel, petrol etc.)
Lubricants, grease and oil
Cost of tires, tubes and other spare parts
Depreciation
Total
C Total charges [ (A) + (B) ]
23. 23
CONTRACT COSTING
Contract costing is “A form of specific order costing; attribution of costs to
individual contracts”.
A contract cost is “Aggregated costs of a single contract; usually applies to major
long term contracts rather than short term jobs”.
Features of long term contracts:
• By contract costing situations, we tend to mean long term and large contracts:
such as civil engineering contracts for building houses, roads, bridges and so
on. We could also include contracts for building ships, and for providing
goods and services under a long term contractual agreement.
• With contract costing, every contract and each development will be
accounted for separately; and does, in many respects, contain the features of a
job costing situation.
• Work is frequently site based.
We might have problems with contract costing in the following areas
• Identifying direct costs
• Low levels of indirect costs
• Difficulties of cost control
• Profit and multi period projects
The source of the following has eluded me: my sincere gratitude for whoever the
author might be.
"Contract Costing such jobs take a long time to complete & may spread over two or
more of the contractor's accounting years”.
Features of a Contract
• The end product
• The period of the contract
• The specification
• The location of the work
• The price
• Completion by a stipulated date
24. 24
• The performance of the product
Collection of Costs :
Desirable to open up one or more internal job accounts for the collection of
costs. If the contract not obtained, preliminary costs be written off as abortive
contract costs in P&L In some cases a series of job accounts for the contract will be
necessary:
• to collect the cost of different aspects
• to identify different stages in the contract
Special features
• Materials delivered direct to site.
• Direct expenses
• Stores transactions.
• Use of plant on site
Two possible accounting methods:
Where a plant is purchased for a particular contract & has little further value to the
business at the end of the contract
Where a plant is bought for or used on a contract, but on completion of the contract it
has further useful life to the business
Alternatively the plant may be capitalised with Maintenance and running costs
charged to the contract."
Format:-
Particulars Rs. Particulars Rs.
To Materials By materials returned **
a. Purchased directly ** By Material sold (cost
b. Issue from site ** price) **
c. Supplied by contractee **
To Wages and salaries ** By WIP
To Other direct Expenses ** Work certified **
To Sub-contractor fees ** Work Uncertified **
To Plant & Machinery (purchase By Materials at site **
price/Book value) **
To Indirect expenditure (apportioned share ** By Plant and
of overheads) machinery(WDV) **
To Notional profit (Surplus) **
25. 25
Total Total **
Profit of Incomplete contract :-
1) When % of completion is less than or equal to 25% then full Notional profit is
transferred to reserve.
2) When % of completion is above 25% but less than 50% following amount should
be credited to profit & loss a/c = 1/3 * Notional Profit * {Cash received / Work
certified}
3) When % of completion is more than or equal to 50% then the amount transferred
to profit is = 2/3 * Notional Profit * {Cash received / Work certified}
[Balance is transferred to reserve a/c]
☺ % of completion = {Work certified/Contract price} * 100
4) When the contract is almost complete the amount credited to profit & loss a/c is
a) Estimated total profit * {Work certified / Contract price}
b) Estimated total profit * {Cash received / Contract price}
c) Estimated total profit * {Cost of work done / Estimated total profit}
d) Estimated total profit*{Cost of work done*Cash received
Estimated total cost * Work certified}
5) Work-In-Progress is shown in Balance Sheet as follows:-
Skeleton Balance sheet
Liabilities (RS) Asset (Rs)
Profit & loss a/c (will include) Work-in-progress
Profit on contract (Specify Value or work certified
the contract number) Cost of work uncertified
Less : Loss on contract Less :- Reserve for unrealized profit
(Specify the contract number) Less :- Amount received from
Sundry creditors (will include) contractee
Wages accrued
Direct expenses accrued
Any other expenses
(Specify)
6) Escalation Clause = This is to safeguard against likely change in price of cost
elements rise by and certain % over the prices prevailing at the time tendering the
contractee has to bear the cost.
26. 26
MARGINAL COSTING
Statement of profit:-
Particulars Amount
Sales ***
Less:-Variable cost ***
Contribution ***
Less:- Fixed cost ***
Profit ***
1) Sales = Total cost + Profit = Variable cost + Fixed cost + Profit
2) Total Cost = Variable cost + Fixed cost
3) Variable cost = It changes directly in proportion with volume
4) Variable cost Ratio = {Variable cost / Sales} * 100
5) Sales – Variable cost = Fixed cost + Profit
6) Contribution = Sales * P/V Ratio
7) Profit Volume Ratio [P/V Ratio]:-
• {Contribution / Sales} * 100
• {Contribution per unit / Sales per unit} * 100
• {Change in profit / Change in sales} * 100
• {Change in contribution / Change in sales} * 100
8) Break Even Point [BEP]:-
• Fixed cost / Contribution per unit [in units]
• Fixed cost / P/V Ratio [in value] (or) Fixed Cost * Sales value per unit
(Sales – Variable cost per unit)
9) Margin of safety [MOP]
• Actual sales – Break even sales
• Net profit / P/V Ratio
• Profit / Contribution per unit [In units]
27. 27
10) Sales unit at Desired profit = {Fixed cost + Desired profit} / Cont. per unit
11) Sales value for Desired Profit = {Fixed cost + Desired profit} / P/V Ratio
12) At BEP Contribution = Fixed cost
13) Variable cost Ratio = Change in total cost * 100
Change in total sales
14) Indifference Point = Point at which two Product sales result in same amount of
profit
= Change in fixed cost (in units)
Change in variable cost per unit
= Change in fixed cost (in units)
Change in contribution per unit
= Change in Fixed cost (in Rs.)
Change in P/Ratio
= Change in Fixed cost (in Rs.)
Change in Variable cost ratio
15) Shut down point = Point at which each of division or product can be closed
= Maximum (or) Specific (or) Available fixed cost
P/V Ratio (or) Contribution per unit
If sales are less than shut down point then that product is to shut down.
Note :-
1) When comparison of profitability of two products if P/V Ratio of one product is
greater than P/V Ratio of other Product then it is more profitable.
2) In case of Indifference point if
Sales > Indifference point --- Select option with higher fixed cost (or) select
option with lower fixed cost.
28. 28
STANDARD COSTING
Method one of reading:-
Material:-
SP * SQ SP * AQ SP * RSQ AP * AQ
(1) (2) (3) (4)
a) Material cost variance = (1) – (4)
b) Material price variance = (2)–(4)
c) Material usage variance = (1) – (2)
d) Material mix variance = (3) – (2)
e) Material yield variance = (1) –(3)
Labour :-
SR*ST SR*AT (paid) SR*RST AR*AT SR*AT(worked)
(1) (2) (3) (4) (5)
a) Labour Cost variance = (1) – (4)
b) Labour Rate variance = (2) – (4)
c) Labour Efficiency variance = (1) – (2)
d) Labour mix variance = (3) – (5)
e) Labour Idle time variance = (5) – (2)
Variable Overheads cost variance :-
SR * ST SR * AT AR * AT
(1) (2) (3)
a) Variable Overheads Cost Variance = (1) – (3)
b) Variable Overheads Expenditure Variance = (2) – (3)
c) Variable Overheads Efficiency Variance = (1) – (2)
[Where: SR =Standard rate/hour = Budgeted variable OH
Budgeted Hours ]
Fixed Overheads Cost Variance:-
SR*ST SR*AT(worked) SR*RBT SR*BT AR*AT(paid)
29. 29
(1) (2) (3) (4) (5)
a) Fixed Overheads Cost Variance = (1) – (5)
b) Fixed Overheads Budgeted Variance = (4) – (5)
c) Fixed Overheads Efficiency Variance = (1) – (2)
d) Fixed Overheads Volume Variance = (1) – (4)
e) Fixed Overheads Capacity Variance = (2) – (3)
f) Fixed Overheads Calendar Variance = (3) – (4)
Sales value variance:-
Budgeted Price*BQ BP*AQ BP*Budgeted mix AP*AQ
(1) (2) (3) (4)
a) Sales value variance = (4)–(1)
b) Sales price variance = (4) – (2)
c) Sales volume variance = (2) – (1)
d) Sales mix variance = (2) – (3)
e) Sales quantity variance = (3) – (1)
Note :-
i) Actual margin per unit (AMPU) = Actual sale price – selling cost per unit
ii) Budgeted margin per unit (BMPU) = Budgeted sale price – selling price per unit
Sales margin variance :-
BMPU*BQ BMPU*AQ BMPU*Budgeted mix AMPU*AQ
(1) (2) (3) (4)
a) Sales margin variance = (4) – (1)
b) Sales margin price variance = (4) – (2)
c) Sales margin volume variance = (2) – (1)
d) Sales margin mix variance = (2) – (3)
e) Sales margin quantity variance = (3) – (1)
Control Ratio :-
1) Efficiency Ratio = Standard hours for actual output * 100
Actual hours worked
2) Capacity Ratio = Actual Hours Worked * 100
30. 30
Budgeted Hours
3) Activity Ratio = Actual hours worked * 100
Budgeted Hours
Verification: Activity Ratio = Efficiency * Capacity Ratio
STANDARD COSTING
Method two of reading:-
Material:-
a) Material cost variance = SC – AC = (SQ*AQ) – (AQ*AP)
b) Material price variance = AQ (SP – AP)
c) Material usage variance = SP (SQ – AQ)
d) Material mix variance = SP (RSQ – AQ)
e) Material yield variance = (AY – SY for actual input) Standard material cost per
unit of output
f) Material revised usage variance (calculated instead of material yield variance)
= [standard quantity – Revised standard
for actual output quantity ] * Standard price
Labour :-
a) Labour Cost variance = SC – AC = (SH*SR) – (AH*AR)
b) Labour Rate variance = AH (SR - AR)
c) Labour Efficiency or time variance = SR (SH –AH)
d) Labour Mix or gang composition Variance = SR(RSH-AH)
e) Labour Idle Time Variance = Idle hours * SR
31. 31
f) Labour Yield Variance = [Actual Output – Standard output for actual input]
* Standard labour cost/unit of output
g) Labour Revised Efficiency Variance (instead of LYV) =
[Standard hours for actual output – Revised standard hours] * Standard rate
Notes :- i) LCV = LRV + LMV + ITV + LYV
ii) LCV = LRV + LEV + ITV
iii) LEV = LMV, LYV (or) LREV
Overhead variance :- (general for both variable and fixed)
a) Standard overhead rate (per hour) = Budgeted Overheads
Budgeted Hours
b) Standard hours for actual output = Budgeted hours * Actual Output
Budgeted output
c) Standard OH = Standard hrs for actual output * Standard OH rate per hour
d) Absorbed OH = Actual hrs * Standard OH rate per hour
e) Budgeted OH = Budgeted hrs * Standard OH rate per hour
f) Actual OH = Actual hrs * Actual OH rate per hour
g) OH cost variance = Absorbed OH – Actual OH
Variable Overheads variance :-
a) Variable OH Cost Variance = Standard OH – Actual OH
b) Variable OH Exp. Variance = Absorbed OH – Actual Variable OH
c) Variable OH Efficiency Variance = Standard OH – Absorbed OH
= [Standard hours for – Actual * Standard rate
actual output hours] for variable OH
Fixed Overheads variance :-
a) Fixed OH Cost Variance = Standard OH – Actual OH
32. 32
b) Fixed OH expenditure variance = Budgeted OH – Actual OH
c) Fixed OH Efficiency Variance = Standard OH (units based) – Absorbed OH
(Hours based)
d) Fixed OH Volume Variance = Standard OH – Budgeted OH
= [Standard hrs for – Budgeted * standard rate
actual output hours ]
e) Fixed OH capacity variance = Absorbed OH–Budgeted OH
f) Fixed OH Calendar Variance = [Revised budgeted hrs – Budgeted hrs]
* Standard rate/hrs
Note:- When there is calendar variance capacity variance is calculated as follows :-
Capacity variance = [Actual hours – Revised * Standard
(Revised) Budgeted hrs] rate/hour
Verification :-
i) variable OH cost variance = Variable OH Expenditure variance
+ Variable OH Efficiency variance
ii) Fixed OH cost variance = Fixed OH Expenditure variance + Fixed OH volume
variance
iii) Fixed OH volume variance = Fixed OH Efficiency variance + Capacity variance
+ Calander variance
Sales variances :-
Turnover method (or) sales value method :-
a) Sales value variance = Actual Sales – Budgeted Sales
b) Sales price variance = [Actual Price – Standard price] * Actual quantity
= Actual sales – standard sales
c) Sales volume variance = [Actual-Budgeted quantity] *Standard price
= Standard sales – Budgeted sales
d) Sales mix variance = [Actual quantity – Revised standard quantity] * Standard
price
33. 33
= Standard sales – Revised sales
e) Sales quantity variance = [Revised standard variance – Budgeted quantity]
* Standard price
= Revised Standard sales – Budgeted sales
Profit method:-
a) Total sales margin variance = (Actual Profit–Budgeted price)
= {Actual quantity * Actual profit per unit}-
{Budgeted quantity * Standard profit per unit}
b) Sales margin price variance=Actual profit–Standard profit
= {Actual Profit per unit – Standard profit per unit} * Actual quantity of sales
c) Sales margin volume variance = Standard profit – Budgeted Profit
= {Actual quantity – Budgeted quantity} * Standard profit per unit
d) Sales margin mix variance = Standard profit – Revised Standard profit
= {Actual quantity – Revised standard quantity} * Standard profit per unit
e) Sales margin quantity variance = Revised standard profit - Budgeted profit
= {Revised standard quantity – Budgeted quantity} * Standard profit per unit
34. 34
STANDARD COSTING
Diagrammatic Representation: -
Material Variance: -
Material cost variance = SC – AC = (SQ*AQ) – (AQ*AP)
Labour Variances:-
Labour Cost variance = SC – AC = (SH*SR) – (AH*AR)
Fixed Overhead Variance : -
a) Standard OH = Standard hrs for actual output * Standard OH rate per hour
35. 35
b) Absorbed OH = Actual hrs * Standard OH rate per hour
c) Budgeted OH = Budgeted hrs * Standard OH rate per hour
d) Actual OH = Actual hrs * Actual OH rate per hour
e) Revised Budgeted Hour = Actual Days * Budgeted Hours per day
(Expected hours for actual days worked)
When Calendar variance is asked then for capacity variance Budgeted
Overhead is (Budgeted days * Standard OH rate per day)
Revised Budgeted Hour (Budgeted hours for actual days) = Actual days * Budgeted
hours per day
Variable Overhead Variance : -
36. 36
Sales Value Variances : -
Sales value variance = Actual Sales – Budgeted Sales
Sales Margin Variances : -
37. 37
Total sales margin variance = (Actual Profit–Budgeted price)
= {Actual quantity * Actual profit per unit}-
{Budgeted quantity * Standard profit per unit}
[Where :-
SC = Standard Cost, AC = Actual Cost
SP = Standard Price, SQ = Standard Quantity
AP = Actual Price, AQ = Actual Quantity
AY = Actual Yield, SY = Standard Yield
RSQ = Revised Standard Quantity, SR = Standard Rate,
ST = Standard Time AR = Actual Rate,
AT = Actual Time RST = Revised Standard Time,
BP = Budgeted Price, BQ = Budgeted Quantity
RBT = Revised Budgeted Time
BMPU = Budgeted Margin per Unit
AMPU = Actual Margin per Unit
Reconciliation:-
Reconciliation statement is prepared to reconcile the actual profit with the
budgeted profit
Particulars Favorable Unfavorable (Rs)
Budgeted Profit :
Add Favorable variances
Less Unfavorable variances
Sales Variances :
Sales price variance
Sales mix variance
Sales quantity variance
Cost variance :-
Material :
Cost variance
38. 38
Usage variance
Mix variance
Labour :
Rate variance
Mix variance
Efficiency variance
Idle time variance
Fixed overhead variance :
Expenditure variance
Efficiency variance
Fixed overhead variance :
Expenditure variance
Efficiency variance
Capacity variance
Calendar variance
NON-INTEGRATED ACCOUNTS
Scheme of journal entries:-
Material:
a) For material purchases (cash or credit)
i) Material control a/c Dr
To Cost ledger control a/c
ii) Stores ledger control a/c Dr
To Material control a/c
b) Purchases for a special job
Work-in-progress ledger control a/c Dr
To Cost ledger control a/c
39. 39
c) Material returned to vender
Cost ledger control a/c Dr
To Stores ledger control a/c
d) Material (direct) issued to production
Work-in-progress control a/c Dr
To Stores ledger control a/c
e) Material (indirect) issued to production
Manufacturing overheads a/c Dr
To Stores ledger control a/c
f) Material returned from shop to stores
Stores ledger control a/c Dr
To Work-in-progress control a/c
g) Material transferred from Job 1 to Job 2
Job 2 a/c Dr
To Job 1 a/c
i) Material issued from stores for repairs
Manufacturing overhead a/c Dr
To Stores ledger control a/c
Labour:
a) Direct wages paid
i) Wage control a/c Dr
To Cost ledger control a/c
ii) Work-in-progress a/c Dr
To Wage control a/c
b) Indirect wages paid to workers in Production,
Administration, Selling and Distribution departments
i) Wage control a/c Dr
To Cost ledger control a/c
ii) Production Overhead a/c Dr
Administrative Overhead a/c Dr
40. 40
Selling & Distribution Overhead a/c Dr
To Wage control a/c
c) Direct Expenses on a particular job
Job a/c Dr
To Cost ledger control a/c
Overheads:-
a) Overhead expenses incurred
Production overhead a/c Dr
Administrative Overhead a/c Dr
Selling & Distribution Overhead a/c Dr
To cost ledger control a/c
b) Carriage inward
Manufacturing Overhead a/c Dr
To Cost ledger control a/c
c) Production Overheads recovered
Work-in-progress control a/c Dr
To Production Overhead a/c
d) Administrative Overhead recovered from finished goods
Finished goods ledger control a/c Dr
To Administrative Overhead a/c
e) Selling and Distribution Overhead recovered from sales
Cost of sales a/c Dr
To Selling & Distribution a/c
f) If over/under absorbed amounts are carried forward to subsequent year, the
balance of each Overhead account will have to be transferred to respective
Overhead suspense (or reserve) Accounts as follows:
i) For over recovery : Production Overhead a/c Dr
To Production overhead suspense a/c
ii) For under recovery : Administrative Overhead Suspense a/c Dr
To Administrative Overhead a/c
Selling & Distribution Overhead Suspense a/c Dr
To Selling & Distribution Overhead a/c
41. 41
g) In case the Under/Over absorbed overheads are transferred to costing profit & loss
a/c then the relevant entries are:
i) For Over recovery: Production Overhead a/c Dr
To Costing Profit & Loss a/c
ii) For Under recovery: Costing Profit & Loss a/c Dr
To Administration Overhead a/c
Sales:-
For sales effected: Cost ledger control a/c Dr
To Costing Profit & Loss a/c
Profit / Loss:
a) In case of profit the entry is as follows
Costing Profit & Loss a/c Dr
To Cost ledger control a/c
b) Reverse the entry in case of loss
The main accounts which are usually prepared when a separate cost ledger is
maintained is as follows:-
i) Cost ledger control a/c
ii) Stores ledger control a/c
iii) Work-in-progress control a/c
iv) Finished goods control a/c
v) Wage control a/c
vi) Manufacturing/Production/Works Overheads a/c
vii) Administrative Overhead a/c
Viii) Selling & Distribution Overhead a/c
ix) Cost of sales a/c
x) Costing profit & loss a/c
42. 42
Transfer Pricing
A transfer price is the amount of money that one unit of an organisation
charges for goods and services to another unit of an organisation.
One of the key aspects here is that a transfer price is equivalent to an ordinary
selling price and that any department or division that sets a transfer price is
effectively selling its goods and services at a profit or a loss to another department or
division within its organisation. Any part of an organisation using transfer pricing
will be classed as a profit centre: since it is operating with a view to making a profit
(whether positive, profit, or negative, loss). If goods and services are transferred
between departments and divisions at cost, then no profit or loss arises and the issue
of transfer pricing does not, or should not, arise.
Organisations have a system of transfer pricing, therefore, in order to assess
the efficiency and effectiveness of its department and divisional managers. This
43. 43
maybe in spite of the fact that transfer prices may be artificial in the sense that it is
felt that there is no rationale for “selling” between departments and divisions.
Criteria for fixing Transfer Pricing:-
i) External Capacity not fully utilized = Variable Cost
ii) Capacity fully Utilized
a) If single product :-
Selling Price (–) Selling Expenses
b) If multiple product
Variable cost + Opportunity cost (measured on the basis of Product
actually sacrificed)
iii) If no market for Intermediate product
Cost of supplying division of optimum level
(-) Cost of the supplying division at previous output level.
Difference in Output
(This would be equal to Variable cost when Fixed Cost is same at all levels)
Note:-
i) Ignore Variable Selling expenses on Inter Department Transfer
ii) In case of (ii) above If selling expenses is not given we have to assume some
% as selling Expenses but it should not exceed 5% .
Budgetary Control
Budget Ratios:-
1) Capacity usage Ratio
= . Budgeted Hours . * 100
Maximum possible working hours in budget period
2) Standard Capacity Employed Ratio
= Actual Hours Worked * 100
Budgeted hours
3) Level of Activity Ratio
= Standard Hours for Actual Production * 100
Standard Hours for Budgeted Production
44. 44
4) Efficiency Ratio
= Standard Hours for Actual Production * 100
Actual Hours
5) Calendar Ratio
= Actual Working days * 100
Budgeted working days
Zero Base Budgeting:
The name zero base budgeting derives from the idea that such budgets are
developed from a zero base: that is, at the beginning of the budget development
process, all budget headings have a value of ZERO. This is in sharp contrast to the
incremental budgeting system in which in general a new budget tends to start with a
balance at least equal to last year's total balance, or an estimate of it.
Definition of Zero Base Budgeting (ZBB)
“A method of budgeting whereby all activities are reevaluated each time a
budget is set. Discrete levels of each activity are valued and a combination chosen to
match funds available”.
Objectives and Benefits of ZBB
What zero base budgeting tries to achieve is an optimal allocation of
resources that incremental and other budgeting systems probably cannot achieve.
ZBB starts by asking managers to identify and justify their area(s) of work in terms
of decision packages (qv).
An effective zero base budgeting system benefits organisations in several
ways. It will
• Focus the budget process on a comprehensive analysis of objectives and
needs
• Combine planning and budgeting into a single process
• Cause managers to evaluate in detail the cost effectiveness of their operations
45. 45
• Expand management participation in planning and budgeting at all levels of
the organisation
Activity Based costing
In Traditional Method we split the Over Head incurred in production, based
on machine hours which are not acceptable for many reasons.
In ABC method Over Head are splited according to the related activity, for
each type of Over Head. Overhead are apportioned among various Production cost
centers on the basis of Activity cost drivers.
Relevant Costing - some theory
Introduction: -
A management decision involves predictions of costs & revenues. Only the
46. 46
costs and revenues that will differ among alternative actions are relevant to the
decision. The role of historical data is to aid the prediction of future data. But
historical data may not be relevant to the management decision itself. Qualitative
factors may be decisive in many cases, but to reduce the number of such factors to be
judged, accountants usually try to express many decision factors as possible in
quantitative terms.
Meaning of Relevant Costs: -
Relevant costs represent those future costs that will be changed by a
particular decision. While irrelevant costs are those costs that will not be affected by
a decision. In the short run, if the relevant revenues exceed the relevant costs then it
will be worthwhile accepting the decision. Therefore relevant costs playa major role
in the decision-making process of an organization. A particular cost can be relevant
in one situation but irrelevant in another, the important point to note is that relevant
costs represent those future costs that will be changed by a particular decision, while
irrelevant costs are those costs that will not be affected by that decision. We shall
now see what are relevant costs and revenues for decision-making process. In
summary relevant information concerns:
Other Important Terminologies : -
Relevant costs are costs appropriate to aiding the making of specific
management decisions. Actually, to affect a decision a cost must be:
Future: Past costs are irrelevant as they are not affected them by future decisions &
decisions should be made as to what is best now.
Incremental: This refers to additional revenue or expenditure, which may appear as a
result of our decision-making.
(A cash flow - Such charges as depreciation may be future but do not represent cash
flows and, as such, are not relevant.)
Sunk costs: Past costs, not relevant for decision making
Committed costs: This is future in nature but which arise from past decisions,
perhaps as the result of a contract.
Relevant Costs: Problem areas:
1 Problems in determining the relevant costs of materials:
47. 47
When considering various decisions, if the any materials required is not taken
from existing stocks but would be purchased on a later date, then the estimated
purchase price would be the relevant material cost. A more difficult problem arises
when materials are taken from existing stock. In this situation the relevant cost of
materials for a particular job (say job X) depends on
Material is in regular use of the company
Material is not in regular use of the company
Material is in short supply.
If the material is in regular use of the company then the material taken from
existing stock requires replacement for the purpose of regular use therefore the
relevant cost of material will be the Replacement cost.
If the material is not in regular use of the company the relevant cost of the
materials depends on their alternative use. The alternative use of the materials will be
either to sell them or to use them on other jobs. Hence the cost of using the materials
results in an opportunity cost consisting of either
The net sales revenue if the materials were sold (or) The expense that would be
avoided if the materials were used on some other job Whichever is greater.
If the material is in short supply the only way material for the job under
consideration can be obtained is by reducing production of some other product / job.
This would release material for the order. but the reduced production will result in
loss of contribution which should be taken in to account when ascertaining the
relevant costs for the specific order. Therefore the relevant cost will be Contribution
lost (before the material cost since the material cost will be incurred in any case) will
be the relevant cost.
labour:
2 Determining the direct labour that are relevant to short - term decision depends on
the circumstances.
Where a company has temporary sparse capacity and the labour force is to be
maintained in the short - term, the direct labour cost incurred will remain same for all
alternative decisions. The direct labour cost will therefore be irrelevant for short -
term decision - making purposes.
However where casual labour is used and where workers can be hired on a
daily basis; a company may then adjust the employment of labour to exactly the
amount required to meet the production requirements. The labour cost will increase
if the company accepts additional work, and will decrease if production is reduced.
In this situation the labour cost be a relevant cost for decision - making purposes.
48. 48
In a situation where full capacity exists and additional labour supplies are
unavailable in the short - term, and where no further overtime working is possible,
the only way that labour resources could then be obtained for a specific order would
be to reduce existing production. This would release labour for the order. but the
reduced production will result in loss of contribution, which should be taken in to
account when ascertaining the relevant costs for the specific' order. Therefore the
relevant cost will be Contribution lost (before the labour cost) will be the relevant
cost.
PROBLEMS
1. In a firm, material A has no alternative uses and 200 units of which lie in stock.
The information below has been collected. You are required to find the relevant price
of 120 units and 250 units respectively.
Book value
Current price
Sale price obtainable
Rs.2 per kg Rs.3 per kg Rs.2.80 per kg
2. Assume in the above problem the material is in regular use of the company
3. Assume in the above problem the material is in short ‘supply and it is not possible
to obtain the stock of material for some more time. At present the material is used in
another product on which a contribution at the rate of Rs.1 O/unit is earned (after
meeting the material cost). Each unit of the product requires 1 KG of Raw material
A.
Cash and fund flow statement
Rules for preparing schedule of changes in working capital :-
Increase in a current asset, results in increase in working capital – so Add
Decrease in current asset, results in decrease in working capital – so Decrease
Increase in current liability, results in decrease in working capital – so Decrease
Decrease in current liability results in increase in working capital – so Add
Funds from operations – Format
Particulars Rs. Rs.
Net profit ***
49. 49
Add : Depreciation **
Goodwill written off *
Preliminary Exp. Written off **
Discount on share written off *
Transfer to General Reserve **
Provision for Taxation *
Provision for Dividend **
Loss on sale of asset *
Loss on revaluation of asset ** ***
*
**
*
**
*
**
*
**
*
***
Less : Profit on sale of asset **
Profit on Revaluation of asset * ***
**
*
Fund flow statement ***
Fund flow statement
Particulars Rs.
Sources of funds : - ***
Issue of shares ***
Issue of Debentures ***
Long term borrowings ***
Sale of fixed assets ***
Operating profit ***
Total Sources ***
Application of funds : - ***
Redumption of Redeemable preference shares ***
Redumption of Debentures ***
Payment of other long term loans ***
Purchase of Fixed assets ***
Operating Loss ***
Payment of dividends, tax etc ***
Total Uses ***
50. 50
Net Increase / Decrease in working capital
(Total sources – Total uses) ***
Cash flow statement
Cash From Operation : -
= Net profit + Decrease in Current Asset
+ Increase in Current Liability
- Increase in Current Asset
- Decrease in Current Liability
Cash flow statement
Sources Rs. Application Rs.
Opening cash and bank ** Opening Bank O/D **
balance ** Redumption of Preference Shares **
Issue of shares ** Redumption of Long term loans **
Raising of long term loans ** Purchase of fixed assets **
Sales of fixed assets ** Decrease in Deferred payment Liability **
Short term Borrowings ** Cash Outflow **
Cash Inflow ** Tax paid **
Closing Bank O/D Dividend paid **
Decrease in Unsecured loans, Deposits **
Closing cash and bank balance **
** **
Ratio Analysis
51. 51
A) Cash Position Ratio : -
1) Absolute Cash Ratio = Cash Reservoir
Current Liabilities
2) Cash Position to Total asset Ratio = Cash Reservoir * 100
(Measure liquid layer of assets) Total Assets
3) Interval measure = Cash Reservoir
(ability of cash reservoir to meet cash expenses) Average daily cash expenses
( Answer in days)
Notes : -
• Cash Reservoir = Cash in hand + Bank + Marketable Non trade investment at
market value.
• Current liabilities = Creditors + Bills Payable + Outstanding Expenses +
Provision for tax (Net of advance tax) + Proposed dividend + Other
provisions.
• Total assets = Total in asset side – Miscellaneous expenses – Preliminary
expenses + Any increase in value of marketable non trading Investments.
• Average cash expenses =Total expenses in debit side of P & L a/c – Non cash
item such as depreciation, goodwill, preliminary expenses written off, loss on
sale of investments, fixed assets written off + advance tax (Ignore provision
for tax) . The net amount is divided by 365 to arrive average expenses.
Remarks : - In Comparison
• When absolute cash ratio is lower then current liability is higher
• When cash position to Total Asset ratio is lower then the total asset is
relatively higher.
• When cash interval is lower the company maintain low cash position. It is not
good to maintain too low cash position or too high cash position.
B) Liquidity Ratio : -
1) Current ratio = Current asset
Current Liability
2) Quick ratio or Acid Test ratio = Quick Asset
Quick liability
Notes : -
52. 52
• Quick Asset = Current Asset – Stock
• Quick Liability = Current liability – Cash credit, Bank borrowings, OD and
other Short term Borrowings.
• Secured loan is a current liability and also come under cash credit
• Sundry debtors considered doubtful should not be taken as quick asset.
• Creditors for capital WIP is to be excluded from current liability.
• Current asset can include only marketable securities.
• Loans to employees in asset side are long term in nature and are not part of
current assets.
• Provision for gratuity is not a current liability.
• Gratuity fund investment is not a part of marketable securities.
• Trade investments are not part of marketable securities.
Remarks : -
• Higher the current ratios better the liquidity position.
C) Capital structure ratios : -
1) Debt equity ratio = Debt = External Equity
(or) Leverage ratio Equity Internal Equity
= Long term debt = Share holders fund
Long term fund Long term fund
2) Proprietary ratio = Proprietary fund
Total Assets
3) Total Liability to Net worth ratio = Total Liabilities
Net worth
4) Capital gearing ratio = Preference share capital + Debt
Equity – Preference share capital
Notes : -
• Share holders fund (or) Equity (or) Proprietary fund (or) Owners fund (or)
Net worth = Equity share + Preference share + Reserves and surplus – P & L
a/c – Preliminary Expenses.
• Debt (or) Long term liability (or) Long term loan fund = Secured loan
(excluding cash credit) + unsecured loan + Debentures.
• Total asset = Total assets as per Balance sheet – Preliminary expenses.
• Total liability = Long term liability + Current liability (or) short term liability
53. 53
• Long term fund = Total asset – Current liability = Share holders fund + long
term loan fund.
Remarks : -
• In debt equity ratio higher the debt fund used in capital structure, greater is
the risk.
• In debt equity ratio, operates favorable when if rate of interest is lower than
the return on capital employed.
• In total liability to Net worth Ratio = Lower the ratio, better is solvency
position of business, Higher the ratio lower is its solvency position.
• If debt equity ratio is comparatively higher then the financial strength is
better.
D) Profitability Ratio : -
1) Gross Profit Ratio = Gross Profit * 100
Sales
2) Net Profit Ratio = Net Profit * 100
Sales
3) Operating Profit ratio = Operating profit * 100
Sales
4) Return to shareholders = Net profit after interest and tax
Share holders fund
5) Return on Net Worth = Return on Net worth * 100
Net worth
6) Return on capital employed (or) Return on investment = Return (EBIT)
Capital Employed
7) Expenses Ratios :-
a) Direct expenses Ratios : -
i) Raw material consumed * 100
Sales
ii) Wages * 100
Sales
iii) Production Expenses * 100
Sales
54. 54
b) Indirect expenses Ratios : -
i) Administrative Expenses * 100
Sales
ii) Selling Expenses * 100
Sales
iii) Distribution Expenses * 100
Sales
iv) Finance Charge * 100
Sales
Notes : -
• In the above the term “term” is used for business engaged in sale of goods,
for other enterprises the word “revenue” can be used.
• Gross profit = Sales – Cost of goods sold
• Operating profit = Sales – Cost of sales
= Profit after operating expenses but before Interest and tax.
• Operating Expenses = Administration Expenses + Selling and distribution
expenses, Interest on short term loans etc.
• Return = Earning before Interest and Tax
= Operating profit
= Net profit + Non operating expenses – Non operating Income
• Capital employed = Share holders fund + Long term borrowings
= Fixed assets + Working capital
• If opening and closing balance is given then average capital employed can be
substituted in case of capital employed which is
Opening capital employed + Closing capital employed
2
E) Debt service coverage ratios = Profit available for debt servicing
Loan Installments + Interest
Notes : -
• Profit available for debt servicing = Net profit after tax provision +
Depreciation + Other non cash charges + Interest on debt.
Remarks : -
• Higher the debt servicing ratio is an indicator of better credit rating of the
company.
• It is an indicator of the ability of a business enterprise to pay off current
installments and interest out of profits.
55. 55
F) Turnover Ratios: -
i) Assets turnover = Sales
Total assets
2) Fixed assets turnover = Sales [Number of times fixed assets has
Fixed assets turned into sales]
3) Working capital turnover = Sales
Working capital
4) Inventory turnover = Cost of goods sold
(for finished goods) Average inventory
5) Debtors turnover (or) Average collection period = Credit sales (in ratio)
Average accounts receivable
(or) = Average accounts receivable * 365 (in days)
Credit sales
6) Creditors turnover (or) Average payment period Credit purchases (in ratio)
Average accounts payable
(or) = Average accounts Payable * 365 (in days)
Credit Purchases
7) Inventory Turnover (for WIP) = Cost of production
Average Inventory (for WIP)
8) Inventory Turnover (for Raw material) = Raw material consumed
Average inventory (for raw material)
10) Inventory Holding Period = 365 .
Inventory turnover ratio
11) Capital Turnover ratio = Cost of sales
Capital employed
Note : -
• Working capital = Current asset – Current liability
= 0.25 * Proprietary ratio
• Accounts Receivable = Debtors + Bills receivable
• Accounts payable = Creditors + Bills Payable
56. 56
Remarks : -
• If assets turnover ratio is more than 1, then profitability based on capital
employed is profitability based on sales.
• Higher inventory turnover is an indicator of efficient inventory movement. It
is an indicator of inventory management policies.
• Low inventory holding period lower working capital locking, but too low is
not safe.
• Higher the debtors turnover, lower the credit period offered to customers. It is
an indicator of credit management policies.
• Higher the creditors turnover, lower the credit period offered by suppliers.
G) Other Ratios: -
1) Operating profit ratio = Net profit ratio + Non operating loss / Sales ratio
2) Gross profit ratio = Operating profit ratio + Indirect expenses ratio
3) Cost of goods sold / Sales ratio = 100% - Gross profit ratio
4) Earnings per share = Net profit after interest and tax
Number of equity shares
5) Price earning ratio = Market price per equity share
Earning per share
6) Pay out ratio = Dividend per equity share * 100
Earning per equity shares
7) Dividend yield ratio = Dividend per share * 100
Market price per share
8) Fixed charges coverage ratio = Net profit before interest and tax
Interest charges
9) Interest coverage ratio = Earning before interest and tax
Interest charges
10) Fixed dividend coverage ratio = Net profit .
Annual Preference dividend
11) Over all profitability ratio = Operating profit * 100
57. 57
Capital employed
12) Productivity of assets employed = Net profit .
Total tangible asset
13) Retained earning ratio = Retained earnings * 100
Total earnings
H) General Remarks: -
• Fall in quick ratio when compared with last year or other company is due to
huge stock pilling up.
• If current ratio and liquidity ratio increases then the liquidity position of the
company has been increased.
• If debt equity ratio increases over a period of time or is greater when
comparing two ratios, then the dependence of the company in borrowed
funds has increased.
• Direct expenses ratio increases in comparison then the profitability decreases.
• If there is wages / Sales ratio increases, then this is to verified
a) Wage rate
b) Output / Labour rate
• Increment in wage rate may be due to increased rate or fall in labour
efficiency.
• Again there are many reasons for fall in labour productivity namely abnormal
idle time due to machine failure, power cut etc.
• Reduction in Raw material consumed / sales ratio may be due to reduction in
wastage or fall in material price.
• Increase in production expenses ratio may also be due to price raise.
• Stock turnover ratio denotes how many days we are holding stock.
• In stock turnover ratio greater the number of days, the movement of goods
will be on the lower side.
• Financial ratios are Current ratio, Quick ratio, Debt equity ratio, Proprietary
ratio, Fixed asset ratio.
• Short term solvency ratios are current ratio, Liquidity ratio
• Long term solvency or testing solvency of the company ratios are Debt equity
ratio, fixed asset ratio, fixed charges coverage ratio (or) Interest coverage
ratio.
• To compute financial position of the business ratios to be calculated are –
current ratio, Debt equity ratio, Proprietary ratio, fixed asset ratio.
• Fictitious asset are Preliminary expenses, Discount on issue of shares and
debentures, Profit and loss account debit balance.
58. 58
Assignment
1) Basis of Technique used is minimization Technique
2) It can also be done in maximation Technique
3) Various steps in Assignment Problem are
Step 1: Check whether the problem is balanced or unbalanced by checking
whether row is equal to column, if unbalanced add dummy column or
row to balance the problem
Step 2: Identify Least Number in each row and subtract with all number in that
Row.
Step 3: Identify least number of each column and subtract with all number in that
column.
Step 4: Check whether solution is reached with zero selection in one row and
column, ie. Cover all the zero with minimum number of lines, solution is
reached only when selected zeros is equal to number of rows or columns
or number of lines is equal to order of matrix.
Step 5: If solution is not reached so maximum sticking
Step 6: Select the least element in within the unstriked Element
Step 7: The element selected above is
i) Subtracted with all the unstriked element
ii) Added to all the double striked element (Intersection of two
lines)
Step 8: Check the solution
Step 9: If solution is not reached continue with the process from step 5.
59. 59
Linear Programming
Simplex Method:-
Steps:-
1. Determine the objective function Z. Objective may be maximization or
minimization.
2. For maximation problem the constraints would be < sign.
For minimization problem the constraints would be > sign.
3. Introduce slack variable
For < sign – add the slack variable ie. Add S1
For > sign – subtract the slack variable and add artificial variable
ie. Subtract S1, add A1.
4. Change the Objective function
For S1 – Add ‘0S1’
For A1 – Add ‘MA1’
5. Simplex table format:-
Cj
Quantity Variable Const. X Y Z S1 S2 RR
S1
S2
Zj
Cj -
Zj
6. Zj is arrived by summation of constant column with X,Y,Z columns
7. Criteria for selecting the key column :-
For Maxima ion Problem – Highest value of Cj – Zj
For Minimization Problem – Lowest Value of Cj – Zj
8. Divide the Quantity Column with Key column to arrive at RR
9. Criteria for Selecting the Key row :-
For Maximation & Minimization Problem – Lowest Positive RR is selected
60. 60
10. The Meeting Point is key Element
11. Criteria for deciding the optimal solution
For Maximation Problem – All elements in Cj – Zj row is negative or zero.
For Minimization Problem – All elements in Cj – Zj row is positive or zero
Note – For finding whether all the elements in Cj – Zj row is positive or zero
for minimization problem substitute all the ‘M’ with highest value.
12. If solution is not reached next table is formed.
13. Input for next table is
First key row in the next table is filled by dividing all the numbers in the key
row of the previous table with the key element.
Remaining all the rows is arrived as follows: -
Corresponding previous _ (Value relating to that * Corresponding
Table row element row in the key column element in key row
in the 2nd table as
filled in previous
step)
14. Check the optimal solution, if not reached form the third table.
15. If solution is reached then answer is amount in quantity column
corresponding to the variable.
Other Points : -
• We can convert the Minimization Problem into Maximation Problem. This is
known as duality.
• We can change the > sign to < sign to match the problem
E.g. X + Y < 100
is converted into -X - Y > -100
61. 61
Transportation
• The procedure followed is Minimization Procedure
• Problem is generally solved in Vogel’s Approximation Method(VAM)
• Steps for the problem is : -
1. Convert profit matrix into loss matrix.
2. Balance the problem.
3. Arrive at Row penalty and column penalty
Row penalty and column penalty is calculated at (2nd least – 1st least) in the
corresponding row or column.
4. Select from the entire Row penalty and column penalty maximum number.
5. From the entire Row or Column minimum is selected.
6. Strike the row or column which gets eliminated.
7. Continue until the entire item in the table is strike.
8. Write separately Initial solution table.
9. Check for Degeneracy. Degeneracy occurs when all the elements in the initial
solution is equal to (Row + column – 1)
10. If degeneracy occurs introduce efcilon – ‘e’. ‘e’ is introduced in least
independent cell.
11. Form UV Matrix. It is formed by the element in the original solution
corresponding to the element in the Initial solution.
12. Find unalloted elements in the UV Matrix
13. Find Ij i.e.(Original Matrix element – Unalloted element found above)
14. Check for optimal solution ie. All items must be zero or positive.
62. 62
15. If not reached select the maximum negative in Ij matrix.
16. Form a loop and reallocate the solution.
17. Repeat from step 9.
Notes: -
1. If there is zero in Ij matrix while arriving at optimal solution then there is
another solution for the problem.
2. Dummy column can be introduced in profit or loss matrix.
3. If there is penalty/redundancy payment for unsatisfying demand etc. is given
then fills the dummy row or column with that amount or fill it with zeros.
4. If there is constraint in the problem first satisfy the constraint and then solve.
5. various other methods for solving the problem is
• Least cost method
• North west corner rule
6. Generally VAM method is used
63. 63
Network Analysis (CPM/PERT)
CPM
• Total float = LS – ES (or) LF – EF
• Free float = Total float – Head event slack
• Independent float = Free float – Tail event slack
• In the diagram Es = Lf in the critical path
• Critical path is the longest duration
• To find the minimum time associated cost (i.e. Additional cost incurred per
unit of time saved) following formula is used :-
Crash cost per day (or) Activity cost supply
= Crash cost – Normal cost
Normal time – Crash time
• Interfacing float = It is the part of the total float which causes reduction in the
float of the succession activities. In other words it is the portion of activity
float which cannot be continued without affecting adversely the float of the
subsequent activity or activities.
• Steps in proceeding the problem : -
2. First find and fill the ES and LF column from the diagram.
3. Then find LS and EF as follows :-
Ls = Lf – Duration
Ef = Es + Duration
4. Find total float
5. Find free float. Wherever total float column has zero free float column is also
taken has zero and remaining elements is filled as said above
64. 64
6. Find Independent float. Wherever free float column has zero Independent
float column is also taken has zero and remaining elements is filled as said
above
Notes: -
1. ES = Earliest Start. Indicates earliest time that the given activity can be
scheduled
2. EF = Earliest Finish. Time by which the activity can be completed at the
earliest.
3. LF = Latest Finish. Latest allowable occurrence time of the head event of the
activity.
4. LS = Latest Start.
5. Total duration of the critical path is the maximum time/amount consumed for
the activity. This should be crashed with respect to crashing days and
crashing cost. This crashing should not change the critical path.
PERT : -
• Expected (or) Average time is found by assigning weights as follows : -
1 for optimistic
4 for Most likely
1 for pessimistic
Average time = 1 optimistic + 4 most likely + 1 pessimistic
6
• Standard Deviation = (Pessimistic time – Optimistic time)
6
• Variance = (Standard Deviation)2
• Probability of completing the project in N days
= Required time(N) (-) Expected time (critical path duration)
Standard Deviation
[Nothing but Z = (X - Mean) / Standard deviation]
= Y (say)
= Find Z(y)
= Probability %
- If required time > Expected time then = 0.5 + Z(Y)
- If required time < Expected time then = 0.5 – Z(Y)