Report
Share
Download to read offline
Recommended
The vegas
The Vegas has a population of nearly 2 million in 2005 and is known for its entertainment, vacation, and tourism industries. It has a desert climate with little rain, extreme heat in the summer with temperatures reaching 40°C. Some of the top earning casinos in The Vegas include Wynn, Planet Hollywood, and Bellagio, and there are over 1500 casinos in total.
Simplification of pcr for Printed products 20120930
The document discusses simplifying PCR calculations for printed products. It proposes a new PCR that calculates carbon emissions from only 10 items, compared to current PCRs that consider many more items. Case studies show the new PCR estimates carbon emissions as 1.7-18.5% lower than current PCRs. Current PCRs also have variability, with carbon estimates ranging from -21.5% to +7.1% depending on emission factors, and +23.4% to -19.0% depending on calculation method used. Therefore, both new and current PCRs provide a range rather than absolute carbon calculations.
Recyclability for paper and board from the viewpoint of de inking
The document discusses recyclability testing for paper printed with UV ink. It summarizes the standard de-inking test procedure used in Japan and identifies some controversial points about the testing methodology. The document then presents results from a de-inking test of four different inks, including UV ink printed at different densities. Some key issues raised include whether the testing accurately represents real-world printing and recycling processes and conditions.
UV Waterless Printing
UV waterless hi-definition printing provides several advantages over conventional printing methods in 3 sentences: It uses UV inks that do not contain volatile organic compounds or require water, allowing for faster postpress without chemicals. It can reduce ink usage by 20-30% through 10-micron dots that provide sharper images while avoiding health risks associated with conventional inks. The process also keeps water resources cleaner by producing developing fluid with only 0.8-1.4% of the biochemical and chemical oxygen demand of conventional printing waste.
Freegans
Freegans are people who live with limited participation in the conventional economy and minimal consumption of resources. They advocate for generosity, cooperation, and sharing as opposed to materialism, competition, and greed. Freegans derive their name from "free" and "vegan", as they avoid consuming animal products or products tested on animals in order to not cause harm. They also recognize abuse of people, animals, and the environment throughout the industrial production process and avoid consuming most products for this reason. Some strategies Freegans employ include dumpster diving to collect discarded food instead of purchasing it.
Presentacion OpenShift by RedHat
Breve introducción a OpenShift para demostrar las capacidades y características del modelo Plataforma como Servicios (Platform as a service, Paas).
Recommended
The vegas
The Vegas has a population of nearly 2 million in 2005 and is known for its entertainment, vacation, and tourism industries. It has a desert climate with little rain, extreme heat in the summer with temperatures reaching 40°C. Some of the top earning casinos in The Vegas include Wynn, Planet Hollywood, and Bellagio, and there are over 1500 casinos in total.
Simplification of pcr for Printed products 20120930
The document discusses simplifying PCR calculations for printed products. It proposes a new PCR that calculates carbon emissions from only 10 items, compared to current PCRs that consider many more items. Case studies show the new PCR estimates carbon emissions as 1.7-18.5% lower than current PCRs. Current PCRs also have variability, with carbon estimates ranging from -21.5% to +7.1% depending on emission factors, and +23.4% to -19.0% depending on calculation method used. Therefore, both new and current PCRs provide a range rather than absolute carbon calculations.
Recyclability for paper and board from the viewpoint of de inking
The document discusses recyclability testing for paper printed with UV ink. It summarizes the standard de-inking test procedure used in Japan and identifies some controversial points about the testing methodology. The document then presents results from a de-inking test of four different inks, including UV ink printed at different densities. Some key issues raised include whether the testing accurately represents real-world printing and recycling processes and conditions.
UV Waterless Printing
UV waterless hi-definition printing provides several advantages over conventional printing methods in 3 sentences: It uses UV inks that do not contain volatile organic compounds or require water, allowing for faster postpress without chemicals. It can reduce ink usage by 20-30% through 10-micron dots that provide sharper images while avoiding health risks associated with conventional inks. The process also keeps water resources cleaner by producing developing fluid with only 0.8-1.4% of the biochemical and chemical oxygen demand of conventional printing waste.
Freegans
Freegans are people who live with limited participation in the conventional economy and minimal consumption of resources. They advocate for generosity, cooperation, and sharing as opposed to materialism, competition, and greed. Freegans derive their name from "free" and "vegan", as they avoid consuming animal products or products tested on animals in order to not cause harm. They also recognize abuse of people, animals, and the environment throughout the industrial production process and avoid consuming most products for this reason. Some strategies Freegans employ include dumpster diving to collect discarded food instead of purchasing it.
Presentacion OpenShift by RedHat
Breve introducción a OpenShift para demostrar las capacidades y características del modelo Plataforma como Servicios (Platform as a service, Paas).
KIMAYU all-in-one gel for super moisturizing
We proudly introduce “KIMAYU moist & smoothing all-in-one gel” by explaining 3-key edge as skin care product.
1st edge: silk protein (sericin=outer coat of silk fiber), which is extracted from precious “golden cocoon” in Thailand, is used as one of main ingredients (popular and common ingredients for gel, such as hydrolyzed elastin, hydrolyzed collagen, sodium hyaluronic are certainly supplemented) and can penetrate deep into the skin to moisturize for sustained period of time because amino acids in silk protein have the same character as Natural Moisturizing Factor (NMF) in the skin. The reason why we selected “golden cocoon” is that it has one of carotenoids named “lutein” protecting the skin from oxidization and UV light damage that lead to aging issue. Unfortunately, normal white cocoon does not contain lutein.
2nd edge: natural ingredient percentage is raised up to 98.7% by replacing petroleum-based ingredients to natural-based ones. Additionally, paraben/alcohol/ synthetic surfactant/dye addition/mineral oil/aroma chemical are strictly banned by our product policy. Some of our customers who have sensitive skin problem (used to be troubled with allergies or atopic dermatitis) also tried KIMAYU, but had no skin trouble like itch or inflammation.
3rd edge: product design thought of all-in-one gel is supported by the idea indicating toner/milky lotion/serum are not required for daily skin care. Thanks to all-in-one concept, you can reduce skin care expense and time drastically. Speaking of cost saving, if you use high-end skin care set (toner/milky lotion/serum), then change to KIMAYU to keep more money in your pocket, you can save around \240,000/yr. (if mid-ranged product, \66,000/yr.) It will be amazingly big cost cut; you can use saved money for different purposes for yourself or your lovely family.
Please start our KIMAYU for your daily skin care from now on.
Be beautiful and smart as well for considering your spending.
Assessment guidance for de inked pulp
This document discusses establishing international standards for assessing the quality levels of de-inked pulp. It proposes that ISO outlines the general testing procedures and parameters while regional certifying bodies set specific de-inking quality levels tailored to their capabilities. The standardization aims to 1) classify de-inked pulp quality levels, 2) encourage suppliers to develop more de-inkable products, and 3) guide printers and buyers to use more de-inkable materials.
20130902 printing standardization by color flow
The document summarizes the results of a printing standardization trial using Staccato-10 micron dot screening. Key findings include:
1) Analysis using Kodak's ColorFlow analyzer showed dot gains were fairly consistent for all colors, within target ranges. Some overprints like MY showed larger differences than targets set by a 175lpi print.
2) Measurements of solid ink densities, dot gains, trap densities and color differences of patches were mostly within acceptable ranges for the high-definition printing method, though a few colors like apparent trap densities were slightly lower than expected.
3) Overall, the vast majority (91.9%) of color differences between printed patches and targets were below a
20130704 Printing Standardization by ColorFlow
This document summarizes the results of a printing standardization trial conducted by Dr. Shimizu to analyze high-definition printing using 10-micron Staccato dots. Analysis was performed using Kodak's ColorFlow analyzer and focused on color matching for different standards and proofs, as well as between different presses. The trial found average color differences of 3.3 with some areas needing adjustment to improve trapping values and gamut. Dr. Shimizu concluded continuous quality analysis is important to empower quality experts and ensure assistance from Japanese suppliers supports high printing quality.
ISO130 WG11_New approaches for quantification scheme of carbon footprint of p...
ISO130 WG11_New approaches for quantification scheme of carbon footprint of p...Shimizu Printing Inc.
This document summarizes a presentation given by Dr. SHIMIZU on new approaches for quantifying the carbon footprint of paper books and e-books. It outlines the system boundaries considered for paper books and e-books, additional factors included for paper books like recycling impacts and bookstore/shopping emissions, and new ideas for quantifying e-book impacts based on usage assumptions. It then compares the estimated carbon footprint per copy between paper books and e-books using different reading devices like the iPad and iPhone.New approaches for quantification scheme of carbon footprint of paper book an...
New approaches for quantification scheme of carbon footprint of paper book an...Shimizu Printing Inc.
New approaches for quantifying the carbon footprint of paper books and e-books are presented. For paper books, additional factors considered include the carbon savings from paper and plate recycling, as well as the footprint of bookstore operations and shopping transportation. For e-books, assumptions are made about daily usage times for devices like the iPad and iPhone to estimate reading footprint. Various usage scenarios are modeled to compare the footprint of paper books and e-books."Eco-conscious design" for printed matters
1. The document summarizes a presentation given by Dr. Hirokazu Shimizu on eco-conscious design for printed products.
2. It discusses quantitatively assessing printed products to be more eco-friendly, using a case study of a thinner plastic document file. The thinner file reduces CO2 emissions by 14.6%.
3. It also addresses reforming product category rules for printing to make calculations more accurate and widespread for small businesses. Simplifying assumptions could overestimate some environmental impacts.
Corporate profile 2013
Dr. Shimizu Hirokazu of Shimizu Printing Inc. discusses their focus on utilizing advanced UV printing technology and environmental impact assessment methods. Their UV 10-color + coating unit allows for limitless printing possibilities on paper and plastic. Their waterless UV printing produces high definition prints with less ink usage and no volatile organic compounds, solvents, or water additives. They utilize the Printing Goes Green carbon calculator to analyze environmental impacts and identify opportunities to improve eco-efficiency.
More Related Content
More from Shimizu Printing Inc.
KIMAYU all-in-one gel for super moisturizing
We proudly introduce “KIMAYU moist & smoothing all-in-one gel” by explaining 3-key edge as skin care product.
1st edge: silk protein (sericin=outer coat of silk fiber), which is extracted from precious “golden cocoon” in Thailand, is used as one of main ingredients (popular and common ingredients for gel, such as hydrolyzed elastin, hydrolyzed collagen, sodium hyaluronic are certainly supplemented) and can penetrate deep into the skin to moisturize for sustained period of time because amino acids in silk protein have the same character as Natural Moisturizing Factor (NMF) in the skin. The reason why we selected “golden cocoon” is that it has one of carotenoids named “lutein” protecting the skin from oxidization and UV light damage that lead to aging issue. Unfortunately, normal white cocoon does not contain lutein.
2nd edge: natural ingredient percentage is raised up to 98.7% by replacing petroleum-based ingredients to natural-based ones. Additionally, paraben/alcohol/ synthetic surfactant/dye addition/mineral oil/aroma chemical are strictly banned by our product policy. Some of our customers who have sensitive skin problem (used to be troubled with allergies or atopic dermatitis) also tried KIMAYU, but had no skin trouble like itch or inflammation.
3rd edge: product design thought of all-in-one gel is supported by the idea indicating toner/milky lotion/serum are not required for daily skin care. Thanks to all-in-one concept, you can reduce skin care expense and time drastically. Speaking of cost saving, if you use high-end skin care set (toner/milky lotion/serum), then change to KIMAYU to keep more money in your pocket, you can save around \240,000/yr. (if mid-ranged product, \66,000/yr.) It will be amazingly big cost cut; you can use saved money for different purposes for yourself or your lovely family.
Please start our KIMAYU for your daily skin care from now on.
Be beautiful and smart as well for considering your spending.
Assessment guidance for de inked pulp
This document discusses establishing international standards for assessing the quality levels of de-inked pulp. It proposes that ISO outlines the general testing procedures and parameters while regional certifying bodies set specific de-inking quality levels tailored to their capabilities. The standardization aims to 1) classify de-inked pulp quality levels, 2) encourage suppliers to develop more de-inkable products, and 3) guide printers and buyers to use more de-inkable materials.
20130902 printing standardization by color flow
The document summarizes the results of a printing standardization trial using Staccato-10 micron dot screening. Key findings include:
1) Analysis using Kodak's ColorFlow analyzer showed dot gains were fairly consistent for all colors, within target ranges. Some overprints like MY showed larger differences than targets set by a 175lpi print.
2) Measurements of solid ink densities, dot gains, trap densities and color differences of patches were mostly within acceptable ranges for the high-definition printing method, though a few colors like apparent trap densities were slightly lower than expected.
3) Overall, the vast majority (91.9%) of color differences between printed patches and targets were below a
20130704 Printing Standardization by ColorFlow
This document summarizes the results of a printing standardization trial conducted by Dr. Shimizu to analyze high-definition printing using 10-micron Staccato dots. Analysis was performed using Kodak's ColorFlow analyzer and focused on color matching for different standards and proofs, as well as between different presses. The trial found average color differences of 3.3 with some areas needing adjustment to improve trapping values and gamut. Dr. Shimizu concluded continuous quality analysis is important to empower quality experts and ensure assistance from Japanese suppliers supports high printing quality.
ISO130 WG11_New approaches for quantification scheme of carbon footprint of p...
ISO130 WG11_New approaches for quantification scheme of carbon footprint of p...Shimizu Printing Inc.
This document summarizes a presentation given by Dr. SHIMIZU on new approaches for quantifying the carbon footprint of paper books and e-books. It outlines the system boundaries considered for paper books and e-books, additional factors included for paper books like recycling impacts and bookstore/shopping emissions, and new ideas for quantifying e-book impacts based on usage assumptions. It then compares the estimated carbon footprint per copy between paper books and e-books using different reading devices like the iPad and iPhone.New approaches for quantification scheme of carbon footprint of paper book an...
New approaches for quantification scheme of carbon footprint of paper book an...Shimizu Printing Inc.
New approaches for quantifying the carbon footprint of paper books and e-books are presented. For paper books, additional factors considered include the carbon savings from paper and plate recycling, as well as the footprint of bookstore operations and shopping transportation. For e-books, assumptions are made about daily usage times for devices like the iPad and iPhone to estimate reading footprint. Various usage scenarios are modeled to compare the footprint of paper books and e-books."Eco-conscious design" for printed matters
1. The document summarizes a presentation given by Dr. Hirokazu Shimizu on eco-conscious design for printed products.
2. It discusses quantitatively assessing printed products to be more eco-friendly, using a case study of a thinner plastic document file. The thinner file reduces CO2 emissions by 14.6%.
3. It also addresses reforming product category rules for printing to make calculations more accurate and widespread for small businesses. Simplifying assumptions could overestimate some environmental impacts.
Corporate profile 2013
Dr. Shimizu Hirokazu of Shimizu Printing Inc. discusses their focus on utilizing advanced UV printing technology and environmental impact assessment methods. Their UV 10-color + coating unit allows for limitless printing possibilities on paper and plastic. Their waterless UV printing produces high definition prints with less ink usage and no volatile organic compounds, solvents, or water additives. They utilize the Printing Goes Green carbon calculator to analyze environmental impacts and identify opportunities to improve eco-efficiency.
More from Shimizu Printing Inc. (20)
ISO130 WG11_New approaches for quantification scheme of carbon footprint of p...
ISO130 WG11_New approaches for quantification scheme of carbon footprint of p...
New approaches for quantification scheme of carbon footprint of paper book an...
New approaches for quantification scheme of carbon footprint of paper book an...
Recently uploaded
MMOLHolging株式会社｜BtoC、D2C事業グロース支援・インターナルブランディング、採用ブランディング、社員エンゲージメント向上DX
MMOLHolgings_company_short.pdf
研究エンパワープラットフォームを提供するLabBaseから理系採用成功に向けたご提案
研究の力を、人類の力に。
私たちは信じている。研究の力を。
電気も、ワクチンも、インターネットも。
人類の今を支える発明やイノベーションは、研究から生まれた。
これからも研究こそが、社会課題解決の土台となり、未来を創造していくだろう。
だから私たちは、研究を加速させたい。
研究の力を、もっと人類の力に変えたい。
人と人、組織と組織、学術と産業といった壁を超えて、
研究者や、その支援者や、研究の成果がシナプスのように結びつき、
研究自体も、研究が生み出す社会へのインパクトも、飛躍的に加速する。
そんな場をつくり、より明るく、持続的な人類の未来に貢献します。
研究エンパワープラットフォーム LabBase
20240606_Service Design Exercise_Visual Report_vol.1.pdf
2024年度高知大学地域協働学部で開講されたサービスデザイン基礎演習Day1の様子をまとめたビジュアルレポートを公開しました。
本演習では、「LEGO® SERIOUS PLAY® （レゴ® シリアスプレイ®）メソッドと教材を活用したワークショップ」を取り入れ、デザイン思考/サービスデザイン、リーンスタートアップ、アイデアソン手法を組み合わせ、地域課題解決や社会課題解決に向けた商品/サービスの開発や政策形成の基本的な考え方と手法を学ぶことを目的に開講されています。
株式会社メンバーズ「脱炭素アクション100」2023年度実施レポート(2024.6.6)
メンバーズでは、デジタルクリエイター（当社社員）がお客さま企業の支援を中心とした日々の業務における行動の一つひとつを変えることで脱炭素社会の実現に貢献するために、2023年4月に「脱炭素アクション100」を全社に展開し社員による取り組みを開始しました。これらの脱炭素の取り組みを広く活用していただきたいと考え、メンバーズでの推進プロセスおよび実績をまとめたレポートを公開します。
クイズでレクリエーション！企業向けクイズワークショップ「みんなのクイズ」の説明資料
クイズでレクリエーション！企業向けクイズワークショップ「みんなのクイズ」の説明資料です。社内イベント、内定者懇親会、研修前のアイスブレイクなどで利用可能です。
Recently uploaded (19)
MMOLHolging株式会社｜BtoC、D2C事業グロース支援・インターナルブランディング、採用ブランディング、社員エンゲージメント向上DX
MMOLHolging株式会社｜BtoC、D2C事業グロース支援・インターナルブランディング、採用ブランディング、社員エンゲージメント向上DX
Business Strategy - ITIL Case Studies by Using ITIL 2011 (Japanese)
Business Strategy - ITIL Case Studies by Using ITIL 2011 (Japanese)
20240606_Service Design Exercise_Visual Report_vol.1.pdf
20240606_Service Design Exercise_Visual Report_vol.1.pdf