WALTER GONZALES ARNAO
This project was posible because all the suport given by the fabcomunity in Lima and abroad, The FAUA UNI specially MSc.Luis Delgado (dean), MSc. PATRICA CALDAS (INIFAUA ‘s director) and MSc. AURELIO PADILLA (rector).
walter gonzales arnao
MY PROJECT IS A DIGITAL loom Inspired in inca´s systems.
It´s works with a physical interface to program it with 4 SWICHes CONTROLLING THE POSITION OF WIRES THROUGH 4 servos.
It Used X-duino to program and control.
At future I would like to develop a digital interface to control more servos for complex tissues.
walter gonzales arnao
MY PROJECT IS A DIGITAL loom Inspired in inca´s systems.
It´s works with a physical interface to program it with 4 SWICHes CONTROLLING THE POSITION OF WIRES THROUGH 4 servos.
It Used X-duino to program and control.
At future I would like to develop a digital interface to control more servos for complex tissues.
17.invention, intellectual property, and business models (may 16)inglesArquitecto Industrial
walter gonzales arnao
facultad de arquitectura urbanismo y artes
universidad nacional de ingenieria
17.invention, intellectual property, and business models (May 16)INGLES
17.invention, intellectual property, and business models (may 16)inglesArquitecto Industrial
walter gonzales arnao
facultad de arquitectura urbanismo y artes
universidad nacional de ingenieria
17.invention, intellectual property, and business models (May 16)INGLES
Hatii seminar 2014 - The emerging needs and the long standing issues curating...Ruggero Lancia
On February the 4th, I have presented at the HATII, for its research seminars, a lesson entitled "The emerging needs and the long standing issues curating digital assets from the Construction Industry". In this presentation I have retraced the introduction of digital tools in the Architecture practices and delved into the recent emerging procedures in Digital Design to discuss against both the DIDECU and the DEDICATE results the issues, requirements and expected development in the Digital Curation of assets from the Construction sector.
walter gonzales arnao
faculta de arquitectura urbanismo y artes
de la UNIVERSIDAD NACIONAL DE INGENIERIA LIMA PERU
ESTE TRABAJO DE INVESTIGACION ES PARA REVALORAR LOS SISTEMAS DE MATEMATICAS DE LOS ANTIGUOS PERUANOS
ORIGIN TECHNOLOOGIES by (ISO 9001: 2008) Quality Management System. Origin Technologies is a “WAY OF SUCCESS” Institute offers technical training programs to the students , its aims to students real exposer to the technologies as expert. During the training session students can make their projects on their desired technologies and opportunity to participate in dynamic technical environment .
This summer training will be on technologies like,
Embedded system
PLC and SCADA
Robotics
.Net
AutoCad
Java
Networking
Ethical Hacking
Advanced embedded system
VLSI
CATIA
VHDL
MATLAB and many other cutting edge technologies.
For More Info -
Call Us On - 9045031918
Visit Our Website - http://origintechnologies.co.in/
Mail Us Your Query At - origin.technologies10@gmail.com
HEAD OFFICE - 1st Floor, 1068, 8 Civil Lines (Above Domino's),Roorkee, Dist- Haridwar (U.K.) India
Ph. No. : 01332312007, 09997117210, 9027533680, 9557019892
'Advanced Techonolgies in Architectural Representation'
Presentation for the initial class of architecture course in the universities of Architecture in Barcelona ETSAB (UPC) and ETSALS (URL)
ARCHICAD’s focus on architecture, design, and creativity,
combined with cutting-edge technology and innovation,
allows building designers to do what they do best: design great
buildings.
ARCHICAD successively won BIM Product of the Year for the seventh year in a row at the Construction Computing Awards (also known as The Hammers)
The pendant with rope bridge, is an installation built with fiber vejetal (esparto or hemp)This installation is based on building bridges incas techniques; At present, these Incan bridges, have been declared World Heritage (Unesco) -Bridge OF QUISWACHACA
https://www.youtube.com/watch?v=NwqeBxHsa8s
https://www.youtube.com/watch?v=k8bcOFK3ru0
ﰀ El puente colgante con cuerdas, es una instalacion construida con fibra vejetal (esparto o cañamo)
ﰀ The concept of the suspension bridge is joining two points a back and forth like the line of life-as a journey
The ring system is inspired by the waist looms it allows quick assembly and a potential advantage aesthetic expression varied physical characteristics of mechanical structures ropes suspended; how the Incas used it 500 years ago
The construction technique of these bridges has been maintained from generation through Andean textile culture 3000años
Esta instalacion se basa en las tecnicas constructivas de puentes colgantesincas;
ﰀ En la actualidad estos puentes incas, han sido declarados patrimonio de la humanidad (Unesco)-PUENTE DE QUISWACHACA
The pendant with rope bridge, is an installation built with fiber vejetal (esparto or hemp)This installation is based on building bridges colgantesincas techniques;At present, these Incan bridges, have been declared World Heritage (Unesco) -Bridge OF QUISWACHACA
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
2. CLASS 18:
Project Development (May 23)
STUDENT: WALTER HECTOR GONZALES ARNAO
UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
3. TEXTILES ARE VERY
IMPORTANT FOR
THE PERUVIAN
CULTURE BECAUSE
THEY ARE AN
ANCIENT
INHERITANCE.
THIS PROJECT TAKES
THE ANDEAN
TECHNIQUES TO A
NEW LEVEL BY
MEANS OF DIGITAL
FABRICATION
summary ADAPTING A
this week assignment
work on your final project, documenting your progress MILENARY CRAFT TO
THE PRESENT.
CLASS 18:Project Development (May 23)
Fab academy
4. FINAL PROJECT
DIGITAL LOOM DESIGN computer
Out serial
Control servo
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
5. FINAL PROJECT
DIGITAL LOOM DESIGNER
FOTO FAB DUINO
Controller
Loom machine computer
serial:bits
Control software Design software
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
6. imput: switch S4
S3
S2
Out serial S1 PC
declare variables interface code to
for the input and create, compile
out put program the code
graphical interface simulation
to
Control servo
S4
S3
S2
S1
S4 S3 S2 S1
INTERFACE
S4 S3 S2 S1
S4 S3 S2 S1
S4 S3 S2 S1 S4 S3 S2 S1
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
7. DIGITAL LOOM DESIGNER
Machine
The Atoms Servomechanism
Digital Loom Designer
Electronic circuits
Control software
The Bits
Design Software (GUI)
8. FINAL PROJECT TO FINISH THE DESIGN THESE TOPICS .
WERE REVIEWED: 4. VERIFY THE
CORRECT SERVO
MOTOR ASSEMBLY
1. PARTS OF THE ONCE PLACED SO
LOOM HAVE TO FOLLOW THE
MATTCH SYSTEM
EXACTLY FUNCTIONING
ACCURATELY PROPERLY.
FOR ASSEMBLY.
2. IMPROVED
5. CONTROL
DESIGN OF MOBILE
CIRCUIT DESIGN
PARTS
3. ENSURE THE LOOM’S OPERATION
CLASS 18:Project Development (May 23)
9. 1
loom fab7
ANTECEDENT
Loom
2
3
Loom prototype A
4
Loom prototype B
5
Loom prototype C
Loom prototype D
6
7
Loom prototype E
8
Loom prototype F
10. 1. PARTS OF THE LOOM HAVE TO MATTCH EXACTLY ACCURATELY FOR ASSEMBLY.
COURT SYSTEM 1.THE LASER CUT ACRYLIC IS OF 4.7 MM 2.SE USE
THE MATERIALS EFFECTIVELY REDUCING WASTE
CLASS 18:Project Development (May 23)
11. 1. PARTS OF THE LOOM
BASIC PARTS
1. FRAMEWORK
2. HOME SUPPORT
3. PIN
4. PIVOTING
COMPLEMENTARY PARTS
2
5. SUPPORT OF ELECTRONIC 3
COMPONENTS
1 6. COIL warp
7. INSURANCE 5
6
4 7
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
12. 1. PARTS OF THE LOOM HAVE TO MATTCH EXACTLY
ACCURATELY FOR ASSEMBLY. COMPLEMENTARY PARTS
5. SUPPORT OF ELECTRONIC COMPONENTS
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
13. 1. PARTS OF THE LOOM HAVE TO MATTCH EXACTLY
ACCURATELY FOR ASSEMBLY.
COMPLEMENTARY PARTS
5. SUPPORT OF ELECTRONIC COMPONENTS
7. INSURANCE
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
14. 1. PARTS OF THE LOOM TO MATCH
EXACTLY ARMAN.
PARTIES AUXILARES
6. COIL warp
CLASS 18:Project Development (May 23)
7. INSURANCE UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
15. 1. PARTS OF THE LOOM HAVE TO MATTCH EXACTLY
ACCURATELY FOR ASSEMBLY.
COMPLEMENTARY PARTS
6. COIL warp
CLASS 18:Project Development (May 23)
7. INSURANCE UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
16. 1. PARTS OF THE LOOM HAVE TO MATTCH EXACTLY
ACCURATELY FOR ASSEMBLY.
2. .
COMPLEMENTARY PARTS
6. COIL warp
CLASS 18:Project Development (May 23)
7. INSURANCE UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
17. 1. PARTS OF THE LOOM HAVE TO MATTCH EXACTLY
ACCURATELY FOR ASSEMBLY.
2. .
A
B C
D
COMPLEMENTARY PARTS
CLASS 18:Project Development (May 23)
6.BOBINA of warp
UNIVERSIDAD NACIONAL DE INGENIERÍA
7.SEGURO FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
18. 2. MOBILE PARTS DESIGN
PART MOBILE Ø10.5mm
5
1 2 3 4
Ø9.50mm
6
Ø8.50mm
7
TESTS OF MOVING PARTS CENTER PIVOT WITH VARIABLE
1. PIVOTING SQUARE 5.PIVOTANTE Ø 10.5 mm
2. PIVOT WITH 1 ARM 6.PIVOTANTE Ø 9.50 mm Ø8.00mm
3. PIVOT 2 ARMS Ø 8.50 mm 7.PIVOTANTE
4. CIRCULAR PIVOT 8. PIVOTING Ø 8.00 mm 8
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
19. 2. DESIGN OF MOVING PARTS ¨A¨
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
20. 2. DESIGN OF MOVING PARTS ¨B¨
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
21. 2. DESIGN OF MOVING PARTS ¨C¨
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
22. 2. DESIGN OF MOVING PARTS ¨D¨
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
23. 2. DESIGN OF MOVING PARTS ¨E¨
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
24. 3. ENSURE THE LOOM’S OPERATION
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
25. 3. ENSURE THE LOOM’S OPERATION
PROCESS IMPROVEMENT
OPERATION TEST WITH CHILDREN
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
26. 4. VERIFY THE CORRECT SERVO MOTOR ASSEMBLY ONCE
PLACED TO FOLLOW THE SYSTEM FUNCTIONING
PROPERLY.
• PUT THE MOTOR IN POSITION SERVO,
verifing proper operation
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
27. 4.1VERIFY THE CORRECT SERVO MOTOR ASSEMBLY ONCE PLACED TO FOLLOW THE
SYSTEM FUNCTIONING PROPERLY.
0 degrees, servo 90 degrees, servo
Starting Position 90 Starting Position Front
Front 0
transmission system to
the servo thread
(copper wire)
View profile Posicion final
starting position vista perfil
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
28. 5. CONTROL CIRCUIT DESIGN
A. Atoms-MACHINE-SERVO MECHANISM-ELECTRONIC CIRCUITS
B. BITS-SOFTWARE-CONTROL SOFTWARE DESIGN (GUI))
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
29. 5. CONTROL CIRCUIT DESIGN
A. Atoms-MACHINE-SERVO MECHANISM-ELECTRONIC CIRCUITS
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
30. 5. CONTROL CIRCUIT DESIGN
B. This card uses C language to control the servo to rotate 180 degrees to move
the rocker, using local components
Parameter Name Value
Pic16f628a-i/p Program Memory Type Flash
Program Memory (KB) 3.5
CPU Speed (MIPS) 5
RAM Bytes 224
Data EEPROM (bytes) 128
Digital Communication Peripherals 1-A/E/USART,
Capture/Compare/PWM Peripherals 1 CCP
Timers 2 x 8-bit, 1 x 16-bit
Comparators 2
Temperature Range (C) -40 to 125
Operating Voltage Range (V) 2 to 5.5
Pin Count 18
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
31. 5. CONTROL CIRCUIT DESIGN
B. BITS-SOFTWARE-CONTROL SOFTWARE DESIGN (GUI)
S4
S3
S2
S1
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
32. 5. CONTROL CIRCUIT DESIGN
B. BITS-SOFTWARE-CONTROL SOFTWARE DESIGN (GUI)
S4 S4
S3 S3
S2 S2
S1 S1
S4
S4
S3 S3
S2
S2
S1
S1
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
33. imput: pulsador S4
S3
S2
Out serial S1 PC
declare variables interface code to
for the imput and create, compile
out put Program to the code
interface graphic simulation
Control servo
S4
S3
S2
S1
S4 S3 S2 S1
INTERFACE
S4 S3 S2 S1
S4 S3 S2 S1
S4 S3 S2 S1 S4 S3 S2 S1
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
34. 1. Tests were conducted
I pressure system
UP
LEFT
1 2 3 4 5 6
CLASS 18:Project Development (May 23)
7
UNIVERSIDAD NACIONAL DE INGENIERÍA
RIGHT
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
35. UNIVERSIDAD NACIONAL DE INGENIERÍA
TOP VIEW FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
36. PROFILE VIEW 1
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
37. PROFILE VIEW 2
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
38. UNIVERSIDAD NACIONAL DE INGENIERÍA
CLASS 18:Project Development (May 23) REAR VIEW FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
39. BOARD
BATTERY HOLDER
DETAIL
UNIVERSIDAD NACIONAL DE INGENIERÍA
CLASS 18:Project Development (May 23) FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
40. SERVO MOUNT
BOART
DETALLE
UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
41. PRESS FIT JOINTS (DETAILS)
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
42. CONCLUTIONS
1. The most difficult stage was to solve the mechanical device
2. Here is an example of the design
3. The main improvement was that now we do not need the axle
for the thread for a larger piece
4. There is a manual mode by activating the switch
5. It has an electronic control system developed in with local
components FAUA UNI-FAB LAB) PIC16F628A-I / P
6. It can be marketed making agreements with state and
regional governments to popularize these technologies aplied to
textiles, starting encouraging politicians to implement
this work in all levels of education.
This project was posible because all the suport given by the
fabcomunity in Lima and abroad, The FAUA UNI specially MSc.Luis
Delgado (dean), MSc. PATRICA CALDAS (INIFAUA ‘s director) and
MSc. AURELIO PADILLA (rector).
CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
43. CLASS 18:Project Development (May 23) UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES