18785-00
•
0 likes•200 views
This document contains drawings and details for a 14' NALP custom shelter with a standing seam roof. It includes a front view, side elevation, isometric view, floor plan, and 13 detailed drawings showing roof construction details, connections, framing, paneling and dimensions. Notes specify materials and welding standards. Dimensions show an overall shelter size of 14'11-3/4" x 12'-3-1/2" with a roof perimeter of 6" x 2" aluminum tube and internal framing of aluminum tubes and plates.
Report
Share
Report
Share
Download to read offline
Recommended
Oil Cooler 2
This document contains specifications and dimensions for a heat exchanger assembly including:
- Tube bundle layout with 117 tubes arranged symmetrically
- Two tube sheets with dimensions 263 3/4" x 35 1/4"
- 14 spacers ranging from 12 1/2" to 47 1/4" to separate the tube sheets
- Additional components include 8 baffle plates and 7 tie rods
Mt Sinai WH Rplcmnt 081016
1. The document provides abbreviations and acronyms commonly used on mechanical drawings. It includes over 70 abbreviations ranging from general terms like GPM, GAL, FT to equipment terms like C.I., CFM, HP.
2. It also lists 13 general mechanical notes covering topics like pipe supports, equipment dimensions, field verification of dimensions, flexible connectors for expansion, and fireproof sealed wall penetrations.
3. The notes indicate that drawings and specifications use specific manufacturers as design basis, and contractors must verify exact placement and dimensions in field conditions.
Sample CAD DWG_CHENG_Nicole Eng (Not Final Set)
This document appears to be architectural plans for renovations to an apartment located at 18 Gramercy Park South in New York City. It includes floor plans, elevations, and sections of various rooms in the apartment as well as details of proposed finishes, fixtures, and construction elements. Reference information is provided about the existing building and zoning. Dimensioned drawings show proposed layouts, fixtures, and construction details for spaces including bedrooms, bathrooms, kitchen, and other rooms.
24hrs fitness escondido for fabrication
This document contains drawings and a bill of materials for structural steel components. It includes details for 6 columns, 5 beams, and templates. The columns are made of HSS, pipe, and plate. Beams include W12, W14, and W16 shapes. Connections use headed studs, threaded rods, and anchor bolts. Dimensions and quantities of materials are specified.
2012.10.26_Blanco Residence - full permit set
This document appears to be an architectural drawing sheet for interior renovations at an address in Coconut Grove, Florida. It includes drawing notes, symbols, abbreviations, and other annotations common to architectural plans. Key information includes the job number (2012_35), date (October 26, 2012), sheet number (20), and that it depicts partition and door notes, floor/wall materials, finishes, and fixture types/locations for the renovation project.
20150811-Allied Telecom
This document provides project details for tenant improvements at Allied Telecom Group LLC in Arlington, Virginia. It includes the project name and number, architects, engineers, applicable building codes, scope of work, building information on construction type and fire resistance ratings, occupancy load calculations, and plumbing fixture requirements. Egress widths, door types, and notes on metal stud construction are also included.
Revit Steel Shop Drawings - Tower
This document contains framing plans, sections, and details for an antenna tower. It includes drawings showing the layout and connections of steel beams, columns, and braces on multiple levels of the tower, labeled as Levels B, C, D, and E. It also contains details for items like ladder installations, guardrails, and bracket connections. Dimensions and material callouts are provided for all structural elements.
Cad samples
- This document contains framing plans and details for a platform and roof structure.
- It includes a platform framing plan showing structural members, connections, and decking. Elevations of members are provided.
- A roof framing plan shows framing for the roof structure including beams, channels, and purlins. Details show connections between members.
- Additional details provide specifications for structural members, connections, guardrails, and access ladders for the platform.
Recommended
Oil Cooler 2
This document contains specifications and dimensions for a heat exchanger assembly including:
- Tube bundle layout with 117 tubes arranged symmetrically
- Two tube sheets with dimensions 263 3/4" x 35 1/4"
- 14 spacers ranging from 12 1/2" to 47 1/4" to separate the tube sheets
- Additional components include 8 baffle plates and 7 tie rods
Mt Sinai WH Rplcmnt 081016
1. The document provides abbreviations and acronyms commonly used on mechanical drawings. It includes over 70 abbreviations ranging from general terms like GPM, GAL, FT to equipment terms like C.I., CFM, HP.
2. It also lists 13 general mechanical notes covering topics like pipe supports, equipment dimensions, field verification of dimensions, flexible connectors for expansion, and fireproof sealed wall penetrations.
3. The notes indicate that drawings and specifications use specific manufacturers as design basis, and contractors must verify exact placement and dimensions in field conditions.
Sample CAD DWG_CHENG_Nicole Eng (Not Final Set)
This document appears to be architectural plans for renovations to an apartment located at 18 Gramercy Park South in New York City. It includes floor plans, elevations, and sections of various rooms in the apartment as well as details of proposed finishes, fixtures, and construction elements. Reference information is provided about the existing building and zoning. Dimensioned drawings show proposed layouts, fixtures, and construction details for spaces including bedrooms, bathrooms, kitchen, and other rooms.
24hrs fitness escondido for fabrication
This document contains drawings and a bill of materials for structural steel components. It includes details for 6 columns, 5 beams, and templates. The columns are made of HSS, pipe, and plate. Beams include W12, W14, and W16 shapes. Connections use headed studs, threaded rods, and anchor bolts. Dimensions and quantities of materials are specified.
2012.10.26_Blanco Residence - full permit set
This document appears to be an architectural drawing sheet for interior renovations at an address in Coconut Grove, Florida. It includes drawing notes, symbols, abbreviations, and other annotations common to architectural plans. Key information includes the job number (2012_35), date (October 26, 2012), sheet number (20), and that it depicts partition and door notes, floor/wall materials, finishes, and fixture types/locations for the renovation project.
20150811-Allied Telecom
This document provides project details for tenant improvements at Allied Telecom Group LLC in Arlington, Virginia. It includes the project name and number, architects, engineers, applicable building codes, scope of work, building information on construction type and fire resistance ratings, occupancy load calculations, and plumbing fixture requirements. Egress widths, door types, and notes on metal stud construction are also included.
Revit Steel Shop Drawings - Tower
This document contains framing plans, sections, and details for an antenna tower. It includes drawings showing the layout and connections of steel beams, columns, and braces on multiple levels of the tower, labeled as Levels B, C, D, and E. It also contains details for items like ladder installations, guardrails, and bracket connections. Dimensions and material callouts are provided for all structural elements.
Cad samples
- This document contains framing plans and details for a platform and roof structure.
- It includes a platform framing plan showing structural members, connections, and decking. Elevations of members are provided.
- A roof framing plan shows framing for the roof structure including beams, channels, and purlins. Details show connections between members.
- Additional details provide specifications for structural members, connections, guardrails, and access ladders for the platform.
Building Information Modeling - Residential Fall 2014
The document contains architectural drawings and details for a residential building project including:
- A site plan showing property lines, setbacks, and site features.
- First and second floor plans showing room layout and dimensions.
- A roof plan showing roof pitch and features.
- Exterior elevation drawings of each facade.
- Building section details and callouts including foundation, wall, and roof construction.
- Interior and exterior construction details.
Fire Protection Sample
This document contains diagrams and technical specifications for a building site plan, fire sprinkler system, and floor plans. It includes details like pipe sizes and locations, sprinkler head types and quantities, mechanical equipment, plumbing fixtures, and room names and numbers for approximately 35,000 square foot facility with residential and administrative areas. Fire protection and building systems are mapped out along with relevant codes and standards.
Royal Museum Alor Setar
The document contains details of the measured drawings for the Royal Museum Kedah project, including a list of 31 drawings with scales and references. It provides the ground floor plan showing the layout and dimensions of the rooms, doors, windows, and notes on finishes and materials. Dimensions, types and other details are provided in schedules for doors and windows.
Measured drawings
The document contains details of the measured drawings for the Royal Museum Kedah project, including a list of 31 drawings with scales and references. It provides the ground floor plan showing the layout and dimensions of the rooms, doors, windows, and notes on finishes and materials. Dimensions, types and other details are provided in schedules for doors and windows.
TechTown 1st Floor Renovation
TechTown vision for the first-floor redesign is to create a more open, collaborative environment for entrepreneurs, along with a best-in-class conference center to serve the expanding need for sophisticated and flexible meeting space in this building.
My duties on this project include:
- Field measurements & existing condition verification.
- Project document setup.
- Construction documentation & detailing utilizing Revit.
Farmers Agoura Hills CEO Office
This document contains plans and specifications for a tenant improvement project for Farmers Insurance Company in an existing building in Agoura Hills, California. It includes a cover page with project information, a sheet index, general notes, contact information, and permit details. The plans include demolition plans, floor plans, reflected ceiling plans, interior elevations, sections, details, schedules, and specifications. It provides documentation for the interior renovation of existing office space into a Chairman's Suite for Farmers Insurance, including new partitions, ceilings, lighting, mechanical, electrical and low voltage systems.
Ril preliminary report of tank 641-207
An inspection was performed on Tank 641-207 using low frequency electromagnetic techniques. The tank is 30 meters in diameter with 49 bottom plates and 28 annular plates. Scanning found surface corrosion and pitting on several bottom plates and one annular plate, with pit depths up to 3.5 mm. Most plates showed 0-20% wall loss, though one bottom plate showed 41-50% loss. Grinding and body welding was noted on several plates.
Gem residences
Gims Urban Oasis is a new launch development located at Sims Drive. Developed by reputable developer Guocoland Limited, Sims Urban Oasis occupies a massive land size of 23,900 square metres, with 1,024 luxurious residential units, commerical shops, and a childcare center.
MONORAIL ASSY-SECT.PDF
This document contains a technical drawing of an existing monorail system with dimensions and details. It shows the layout of the monorail tracks, crossbeams, and supports. Notes indicate existing structural members and specify materials, dimensions, and fabrication details like templates and drilling. The drawing is intended for fabrication and construction purposes.
Project4
The document contains details for the stairs in Unit 106 of a multi-family dwelling project, including dimensions for the main floor, basement, and second floor levels. Plans at a scale of 1/4 inch to 1 foot are provided showing the straight run and winder sections of the staircase between floors.
CHECK LIST FOR ( HVAC ) WORK & SHOP DRAWING
This document contains a checklist for HVAC work and shop drawings. It lists over 40 items to check, including pipe and duct supports, insulation, equipment installation, wiring, labeling, access points, coordination with other building systems, and best practices for layout and installation. The checklist aims to ensure all critical components are addressed for a complete and code-compliant HVAC system design and installation. Contact information is provided for any required clarification.
2000 Del Mar Heights Elementary Modernization
This document provides plans and details for the modernization of four permanent buildings and site modifications at Del Mar Heights School in Del Mar, California to improve accessibility. The modernization work includes new mechanical, lighting, data and signal systems, new finishes, partitions and doors, new casework, and modernized plumbing and power systems. The document includes demolition plans, floor plans, roof plans, elevations, sections, schedules and details necessary to communicate the scope and design of the modernization project to contractors and stakeholders.
Finished Setup Sheets
This document provides information about the setup of 10 stations for processing part number 182909. It lists the tools, equipment, and specifications for each station, including loaders, rough turning stations, and recess stations. Quantities, part numbers, tool offsets, and descriptions are provided for various collets, magazines, inserts, heads, and other tools used at each station in the multi-step manufacturing process.
Flanges
This document contains specifications for Cameron flanges in various sizes, including the flange size, gasket size, inner diameter, bolt size, bolt circle diameter, and number of bolts. Flange sizes listed are 4-1/16 inch, 3-1/16 inch, 3-1/8 inch, and 2-9/16 inch, each available in 15K, 10K, and 5K pressure ratings. The specifications provide the necessary details to ensure proper fitting and installation of the Cameron flanges.
24491-00
This document contains drawings and details for a 5' non-advertising low dome euro shelter, including:
1) Front and top views of the shelter showing structural members and dimensions.
2) Side and isometric views as well as cross sections and details of structural connections.
3) Notes specifying materials, welding standards, and quality control procedures.
Lexington Pkwy Passive House Plus
This document provides details about the first certified Passive House Plus project in Minnesota. It is a single-family home located in St. Paul that prioritizes views, accessibility, health, sustainability and energy efficiency. The building envelope and materials are designed to meet Passive House standards with high insulation values, an air-tight envelope, and triple-pane windows. Diagrams and details are included to illustrate the construction methods for walls, roof, foundation, and windows.
TYTE TECH PACK - BY KARLA
This document provides specifications and construction details for a pair of jeans. It includes information on fabric content and wash, pattern measurements, sewing instructions, and a call out sheet noting key details to ensure quality construction. Specifically, it outlines the style number, fabric type, various body measurements, sewing sequence and techniques for different components, and emphasizes ensuring an even waistband, straight seams, and proper yoke shaping.
Forklift pumps
This document provides part number information for forklift pumps from various manufacturers including Toyota, TCM, and Hyster. It lists pump part numbers, descriptions, specifications and applications for different forklift truck models, engine types, and capacities ranging from 1 to 7 tons. The pumps listed are for petrol/gas and diesel powered forklifts, as well as electric forklifts, and include information on shaft type, ports, rotation, mounting, and OEM part numbers.
Dkern portfolio 17_EMBEDDED
This document provides an overview of the typical workflow for Dana Kern's design and fabrication projects. It begins with an explanation of the 3 step process: 1) Receiving client mock-up drawings and specifications, 2) Reimagining the mock-up in 3D with materials and assembly details, and 3) Creating fabrication drawings, instructions, and collaborating with fabricators. It then uses a past project called "Tech Towers" to illustrate each step of the process through drawings, diagrams and specifications.
CASE 2366 IH Axial - flow combine parts catalog
This document provides a list of parts for the radiator, cooling system, and deaeration system for a Case IH 2366 Axial-Flow Combine from 1998 to 2004. It includes 14 different hoses, belts, and chains as well as radiator components like tanks, fittings, and seals. The deaeration system assembly includes a tank, sensor, caps, and supports that are mounted with bolts, nuts, and clamps.
EX-13 BUILDING SECTION-Arch D
This document contains building plans and section details for a single family home, including floor plans showing rooms like the garage, mud room, family dining, bedrooms, and family room. It also includes building section diagrams labeling materials like asphalt shingles, OSB sheathing, batt insulation, gypsum board, and floor and wall construction details. Dimensioned drawings provide specifications for elements of the structure from the foundation to the roof.
Construction Document set
This document contains architectural drawings and notes for a building project located at 289 Tappan Street in Brookline, MA. It includes floor plans, elevations, and sections of the building showing wall types and materials. Notes provide information on construction requirements, dimensions, building codes, and specifications.
More Related Content
What's hot
Building Information Modeling - Residential Fall 2014
The document contains architectural drawings and details for a residential building project including:
- A site plan showing property lines, setbacks, and site features.
- First and second floor plans showing room layout and dimensions.
- A roof plan showing roof pitch and features.
- Exterior elevation drawings of each facade.
- Building section details and callouts including foundation, wall, and roof construction.
- Interior and exterior construction details.
Fire Protection Sample
This document contains diagrams and technical specifications for a building site plan, fire sprinkler system, and floor plans. It includes details like pipe sizes and locations, sprinkler head types and quantities, mechanical equipment, plumbing fixtures, and room names and numbers for approximately 35,000 square foot facility with residential and administrative areas. Fire protection and building systems are mapped out along with relevant codes and standards.
Royal Museum Alor Setar
The document contains details of the measured drawings for the Royal Museum Kedah project, including a list of 31 drawings with scales and references. It provides the ground floor plan showing the layout and dimensions of the rooms, doors, windows, and notes on finishes and materials. Dimensions, types and other details are provided in schedules for doors and windows.
Measured drawings
The document contains details of the measured drawings for the Royal Museum Kedah project, including a list of 31 drawings with scales and references. It provides the ground floor plan showing the layout and dimensions of the rooms, doors, windows, and notes on finishes and materials. Dimensions, types and other details are provided in schedules for doors and windows.
TechTown 1st Floor Renovation
TechTown vision for the first-floor redesign is to create a more open, collaborative environment for entrepreneurs, along with a best-in-class conference center to serve the expanding need for sophisticated and flexible meeting space in this building.
My duties on this project include:
- Field measurements & existing condition verification.
- Project document setup.
- Construction documentation & detailing utilizing Revit.
Farmers Agoura Hills CEO Office
This document contains plans and specifications for a tenant improvement project for Farmers Insurance Company in an existing building in Agoura Hills, California. It includes a cover page with project information, a sheet index, general notes, contact information, and permit details. The plans include demolition plans, floor plans, reflected ceiling plans, interior elevations, sections, details, schedules, and specifications. It provides documentation for the interior renovation of existing office space into a Chairman's Suite for Farmers Insurance, including new partitions, ceilings, lighting, mechanical, electrical and low voltage systems.
Ril preliminary report of tank 641-207
An inspection was performed on Tank 641-207 using low frequency electromagnetic techniques. The tank is 30 meters in diameter with 49 bottom plates and 28 annular plates. Scanning found surface corrosion and pitting on several bottom plates and one annular plate, with pit depths up to 3.5 mm. Most plates showed 0-20% wall loss, though one bottom plate showed 41-50% loss. Grinding and body welding was noted on several plates.
Gem residences
Gims Urban Oasis is a new launch development located at Sims Drive. Developed by reputable developer Guocoland Limited, Sims Urban Oasis occupies a massive land size of 23,900 square metres, with 1,024 luxurious residential units, commerical shops, and a childcare center.
MONORAIL ASSY-SECT.PDF
This document contains a technical drawing of an existing monorail system with dimensions and details. It shows the layout of the monorail tracks, crossbeams, and supports. Notes indicate existing structural members and specify materials, dimensions, and fabrication details like templates and drilling. The drawing is intended for fabrication and construction purposes.
Project4
The document contains details for the stairs in Unit 106 of a multi-family dwelling project, including dimensions for the main floor, basement, and second floor levels. Plans at a scale of 1/4 inch to 1 foot are provided showing the straight run and winder sections of the staircase between floors.
CHECK LIST FOR ( HVAC ) WORK & SHOP DRAWING
This document contains a checklist for HVAC work and shop drawings. It lists over 40 items to check, including pipe and duct supports, insulation, equipment installation, wiring, labeling, access points, coordination with other building systems, and best practices for layout and installation. The checklist aims to ensure all critical components are addressed for a complete and code-compliant HVAC system design and installation. Contact information is provided for any required clarification.
2000 Del Mar Heights Elementary Modernization
This document provides plans and details for the modernization of four permanent buildings and site modifications at Del Mar Heights School in Del Mar, California to improve accessibility. The modernization work includes new mechanical, lighting, data and signal systems, new finishes, partitions and doors, new casework, and modernized plumbing and power systems. The document includes demolition plans, floor plans, roof plans, elevations, sections, schedules and details necessary to communicate the scope and design of the modernization project to contractors and stakeholders.
Finished Setup Sheets
This document provides information about the setup of 10 stations for processing part number 182909. It lists the tools, equipment, and specifications for each station, including loaders, rough turning stations, and recess stations. Quantities, part numbers, tool offsets, and descriptions are provided for various collets, magazines, inserts, heads, and other tools used at each station in the multi-step manufacturing process.
Flanges
This document contains specifications for Cameron flanges in various sizes, including the flange size, gasket size, inner diameter, bolt size, bolt circle diameter, and number of bolts. Flange sizes listed are 4-1/16 inch, 3-1/16 inch, 3-1/8 inch, and 2-9/16 inch, each available in 15K, 10K, and 5K pressure ratings. The specifications provide the necessary details to ensure proper fitting and installation of the Cameron flanges.
What's hot (14)
Building Information Modeling - Residential Fall 2014
Building Information Modeling - Residential Fall 2014
Similar to 18785-00
24491-00
This document contains drawings and details for a 5' non-advertising low dome euro shelter, including:
1) Front and top views of the shelter showing structural members and dimensions.
2) Side and isometric views as well as cross sections and details of structural connections.
3) Notes specifying materials, welding standards, and quality control procedures.
Lexington Pkwy Passive House Plus
This document provides details about the first certified Passive House Plus project in Minnesota. It is a single-family home located in St. Paul that prioritizes views, accessibility, health, sustainability and energy efficiency. The building envelope and materials are designed to meet Passive House standards with high insulation values, an air-tight envelope, and triple-pane windows. Diagrams and details are included to illustrate the construction methods for walls, roof, foundation, and windows.
TYTE TECH PACK - BY KARLA
This document provides specifications and construction details for a pair of jeans. It includes information on fabric content and wash, pattern measurements, sewing instructions, and a call out sheet noting key details to ensure quality construction. Specifically, it outlines the style number, fabric type, various body measurements, sewing sequence and techniques for different components, and emphasizes ensuring an even waistband, straight seams, and proper yoke shaping.
Forklift pumps
This document provides part number information for forklift pumps from various manufacturers including Toyota, TCM, and Hyster. It lists pump part numbers, descriptions, specifications and applications for different forklift truck models, engine types, and capacities ranging from 1 to 7 tons. The pumps listed are for petrol/gas and diesel powered forklifts, as well as electric forklifts, and include information on shaft type, ports, rotation, mounting, and OEM part numbers.
Dkern portfolio 17_EMBEDDED
This document provides an overview of the typical workflow for Dana Kern's design and fabrication projects. It begins with an explanation of the 3 step process: 1) Receiving client mock-up drawings and specifications, 2) Reimagining the mock-up in 3D with materials and assembly details, and 3) Creating fabrication drawings, instructions, and collaborating with fabricators. It then uses a past project called "Tech Towers" to illustrate each step of the process through drawings, diagrams and specifications.
CASE 2366 IH Axial - flow combine parts catalog
This document provides a list of parts for the radiator, cooling system, and deaeration system for a Case IH 2366 Axial-Flow Combine from 1998 to 2004. It includes 14 different hoses, belts, and chains as well as radiator components like tanks, fittings, and seals. The deaeration system assembly includes a tank, sensor, caps, and supports that are mounted with bolts, nuts, and clamps.
EX-13 BUILDING SECTION-Arch D
This document contains building plans and section details for a single family home, including floor plans showing rooms like the garage, mud room, family dining, bedrooms, and family room. It also includes building section diagrams labeling materials like asphalt shingles, OSB sheathing, batt insulation, gypsum board, and floor and wall construction details. Dimensioned drawings provide specifications for elements of the structure from the foundation to the roof.
Construction Document set
This document contains architectural drawings and notes for a building project located at 289 Tappan Street in Brookline, MA. It includes floor plans, elevations, and sections of the building showing wall types and materials. Notes provide information on construction requirements, dimensions, building codes, and specifications.
DNB36DWDWB36SB3621SB
DN
B36
D/W
DW
B36
S
B
3
6
2
1
S
B
3
6
2
1
SB6021
B
3
6
B36 DCB36RB33
B
3
6
B
3
6
S
B
36
B
C
B
1
2
R
B36
DW
B36
S
B
3
6
2
1
S
B
3
6
2
1
SB6021
B
3
6
B36 DCB36RB33
B
3
6
B
3
6
S
B
36
B
C
B
1
2
R
2
4
L
C
2
4
L
C
W/D
18070
1007010070
3
0
6
8
1268FX
3068
1268FX
5050DC
5050DC
2
0
3
6
S
C
2646SC 2646SC 4050DC 4050DC 6050TC
6
0
6
8
2630SC
3068
3
0
6
83
2
6
8
2
6
6
8
6068 2868
6068
2
6
6
8
2668
2
6
6
8
2868
26
68
3068
8070
4
0
6
8
UP
UP
UP
CO/SD
CO/SD
CO/SD
CO/SD
1
'
8
'
7
'-
1
1
1
/2
"
6
'-
0
1
/2
"
2
'
3
'
1
'
27'
11'-0 1/2"
2'-1"
1
2
'-
5
"
7'
7'
3'
2'-8 1/2"
5
'
3
'-
5
1
/2
"
8
'-
1
"
8
'
7'-8 1/2" 9'-0 1/2" 4'-1"
1
4
'-
8
"
5
'-
5
"
2
'-
8
"
2
'-
1
"
1
2
'-
5
"
7'
1
8
'-
5
1
/2
"
3
'-
4
"
2
'-
1
"
8'-7" 4'-6 1/2"
1
9
'-
7
1
/2
"
4
'-
6
"
13'-5"
6
'-
2
"
5
'-
7
"
15'-1 1/2" 32'-8 1/2"
6'
5'
13'-5"
9
'
1
5
'-
5
"
1
1
'-
4
"
1
1
'-
4
"
3'-5 1/2"
7'-11 1/2"
1
'
1
'
3
'
3'-8"
4
'
3
0
'-
8
1
/2
"
5'-10 1/4" 5'-10 1/4"
11'-8 1/2"
3'-6" 3'-6"1'-10"
11'-5 1/2"
1'-10"
1
1
'-
8
"
19' 13'-8 1/2"
7 ' -3 " X 7 ' -1 1 "
1 1 ' -6 " X 3 ' -3 "
P ORC H
MASTER SUITE
W.I.C.
BEDROOM #2
BEDROOM #3
S T AI RWELL
GREAT ROOM
ENTRY
NOOK
KITCHEN
LAUNDRY
DECK
3 CAR GARAGE
9' BASEMENT WALL HEIGHT
9'-1 1/8" MAIN FLOOR HEIGHT
AREA:
MAIN FLOOR 1,974 SF
BASEMENT 1,974 SF
3 CAR GARAGE 2,007 SF
FRONT PORCH 56 SF
REAR COVERED DECK 290 SF
SHEET:
PLAN DATE:
3/11/2017
1
2
th
S
T
R
E
E
T
1ST FLOOR PLAN
©
I
N
F
O
R
M
A
T
IO
N
C
O
N
T
A
IN
E
D
W
I
T
H
I
N
T
H
I
S
D
O
C
U
M
E
N
T
I
N
C
L
U
D
I
N
G
,
B
U
T
N
O
T
L
IM
I
T
E
D
T
O
,
D
E
S
IG
N
C
O
N
C
E
P
T
S
,
A
R
E
P
R
O
P
E
R
T
Y
O
F
B
U
IL
D
E
R
S
.
R
E
P
R
O
D
U
C
T
IO
N
O
F
T
H
IS
I
N
F
O
R
M
A
T
IO
N
I
S
P
R
O
H
I
B
IT
E
D
W
I
T
H
O
U
T
W
R
IT
T
E
N
C
O
N
S
E
N
T
O
F
B
U
I
L
D
E
R
S
.
DRAWN BY:
EAH
GENERAL NOTES
1. ALTHOUGH EVERY EFFORT HAS BEEN MADE IN
PREPARING THESE PLANS AND CHECKING THEM FOR
ACCURACY, IT IS THE PROJECT LEADS RESPONSIBILITY TO
VERIFY THE ACCURACY OF ALL DETAILS AND DIMENSIONS.
2. THESE DRAWINGS ARE INTENDED TO CONFORM TO
GENERALLY ACCEPTED BUILDING PRACTICES; HOWEVER,
STATE AND LOCAL CODES VARY WIDELY AND ALL
FEDERAL, STATE, AND LOCAL CODES, ORDINANCES,
REGULATIONS, ETC. SHALL BE CONSIDERED AS PART OF
THE SPECIFICATIONS OF THIS BUILDING, AND SHALL TAKE
PRECEDENCE OVER ANYTHING SHOWN, DESCRIBED, OR
IMPLIED. IT IS THE CONTRACTOR'S RESPONSIBILITY TO
VERIFY THAT ALL APPLICABLE BUILDING CODE
REQUIREMENTS ARE BEING MET.
3. DO NOT SCALE DRAWINGS, USE ONLY THE PRINTED
DIMENSIONS.
4. VERIFY WITH THE WINDOW MANUFACTURER ALL WINDOW
SIZES AND APPLICABLE EGRESS REQUIREMENTS.
5. ALL DIMENSIONS ARE TAKEN FROM/TO ROUGH STUDS OF ...
3D Drawing Samples
This document contains parts lists and drawings for various compressor components including pistons, rods, valves, and related parts. It provides item numbers, part names and descriptions for 19 items in a packing case assembly, 10 items in a discharge valve assembly, 11 items in a suction valve assembly, 9 items for a piston rod assembly, and lists other drawings for additional assemblies. Dimensions, materials, weights and other specifications are included for the different parts.
COURTYARD-STAIR
The document is a set of drawings for a courtyard stair at the Wencel Building located at 1301 Wallnut, Boulder Colorado. It includes a 3D view, plan, and sections of the stair. The drawings show precast concrete treads, steel stringers, and railing details. Revisions were made in November 2015 and January 2016.
CASE 1083 corn head parts catalog
This document provides parts information for a 1083 corn head, including:
- Wiring harness and lamp mounting parts.
- Marker light parts.
- Main frame assembly parts for corn head models 1064, 1083, and 1084.
- Feeder adapter parts for an 815 combine with quick-attach feeder.
- Feeder adapter parts for a 915 combine with quick-attach feeder.
Cnc projeto completo (só montar)
The document contains technical drawings and part lists for assemblies of a CNC router. It includes 6 pages of drawings showing components like the base assembly, gantry assembly, and axis assemblies. The drawings include views, material specifications, and lists of parts with descriptions.
Chicago Med Portfolio
The document contains plans for an operating room, including horizontal and vertical sections, door and cabinet elevations, and material specifications. Key details include dimensions for the operating room space, location of equipment such as gimbal glass and wild walls, and finishes of light blue and dark blue laminate with sage accents.
TOWER AS BUILT 5 FEB 15
This document contains construction drawings for a project at Marine Corps Base Hawaii. The drawings include a title sheet with an index of drawings, sheets showing foundation details and layouts, elevations, framing details, and notes. The drawings were prepared by the 84th Engineer Battalion for a project to construct a training structure at Schofield Barracks in Hawaii.
Line type key
The document contains architectural drawings showing foundation details for a garage and house including:
1) Plan view and elevations showing the garage foundation layout with sonotube footings, rebar, and concrete details.
2) Building cross section detailing floor assemblies from the roof to the basement with materials and insulation notes.
3) Elevation of the side of the house showing proposed mechanical equipment locations.
IC3D example dwgs
This document contains a bill of materials for steel components of a stair assembly. It lists various steel pieces including channels, plates, and sheets along with their quantities, descriptions, lengths, weights, and material. It also contains fabrication notes instructing the shop to grind smooth all exposed welds and edges.
PineStreetSocietyHill
This document contains construction details for a residential renovation project located in Philadelphia, Pennsylvania. Details include framing sections for walls, floors, stairs, windows, and structural elements like beams and columns. Materials specified include metal stud framing, rigid foam insulation, gypsum wallboard, wood trim, and Marvin windows. Reinforced concrete elements like footings and grade beams are also detailed to support new and existing structural components.
Blind Flange dimensions by Sandco Metal Industries
Sandco Metal Industries is a leading manufacturer of blind flanges(BL). We specialize in producing high quality and close tolerance flanges. A blind flange, also known as blanking flange, is used in sealing an end of the piping system. This is generally used in high pressure applications to cease the flow of gases or liquids from one end. Blind flange is a convenient option to close an end of a pipe in large applications when compared to others due to its ease of access.
COSTELLO_ANNAPOLIS SINGLE FAMILY
This document contains architectural drawings for a single family home, including:
- Floor plans showing room layouts and dimensions for the basement, first floor, second floor, and roof.
- Building wall sections and details showing construction materials and assemblies.
- Elevations of the home's south, north, and east sides.
- Bathroom plans at a scale of 3/8" = 1'-0".
- The drawings were created by [Draftsperson Name] for [Architect Firm] for a home in Annapolis, MD.
Similar to 18785-00 (20)
Blind Flange dimensions by Sandco Metal Industries
Blind Flange dimensions by Sandco Metal Industries
18785-00
- 1. FRONT VIEW SIDE ELEVATION ISO VIEW SCALE 1/32 FLOOR PLAN DETAIL A SCALE 1/5 DETAIL B SCALE 1/5 SHOE WELDMENT DETAIL C SCALE 1/5 ROOF TO POST CONNECTION DETAIL E SCALE 1/8 ROOF DETAIL DETAIL F SCALE 1/6 SECTION G-G RAIN GUTTER, DRAIN HOLES SCALE 1/16 DETAIL ROOF WELDMENT SCALE 1 / 8 CENTER PANEL COVERING CENTER PANEL WELDMENT PROJECTED FROM DETAILED ROOF WELDMENT SCALE 1 / 8 ROOF PERIMETER W/ END PANEL COVERING SCALE 1/16 PROJECTED VIEW PERIMETER W/ END PANEL COVER (BOTH ENDS) SCALE 1/16 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 A A B B C C D D DESCRIPTION CUSTOMER/VENDOR MATL. SCALE SIZE DATE DRAWN BY: DWG NO. Tolar Manufacturing Company, Inc 258 Mariah Circle, Corona CA. 92879 14'NALP CUSTOM SHELTER W/ STANDING SEAM ROOF D 18785-00 3/13/2013 MFUENTES T:InventorCBS Louisville18785-00.idw - REV. NO. SHEET NO. 1 OF 1CBS LOUISVILLE 1/16 A B C D D EF G G GENERAL NOTES: 1. ALL STRUCTURAL STEEL, UNLESS OTHERWISE NOTED, SHALL BE ASTM A-36, MINIMUM YIELD STRENGTH 36,000 PSI. 2. ALL STRUCTURAL ALUMINUM MEMBERS, UNLESS OTHERWISE NOTED, SHALL BE OF ALLOY 6063-T5 OR GREATER. 3. ALL HOLES TO BE DRILLED OR PUNCHED. 4. STEEL WELDING SHALL CONFORM TO AMERICAN WELDING SOCIETY STANDARD D1. 1-10. ELECTRODES SHALL CONFORM TO AWS 5.1, CLASS E70S-5. 5. ALUMINUM WELDING SHALL CONFORM TO AMERICAN WELDING SOCIETY STANDARD D1. 2-08. ELECTRODES SHALL CONFORM TO AWS/SFA 5.10 CLASS ER4043. 6. ALL WELDING TO BE DONE AT TOLAR MANUFACTURING COMPANY, INC. FACILITY. STANDING SEAM ROOF SYSTEM 6" X 2" TUBE (ROOF PERIMETER) 14'-11 3/4" (EDGE OF RAIN GUTTER TO EDGE OF RAIN GUTTER) RAIN GUTTER AT SLIGHT PITCH (2%) TO CHANNEL WATER TOWARD REAR OF SHELTER 11'-8 1/2" C.C. COLUMNS 3'-31/2" CTCSHOES 3'-3 1/2" 1'-5 1/2" O.H. (TYP.) (14'-0") 811/16" 3'-411/16" 7'-1/16"CLEARANCE 1'-3 3/4" 1'-3 3/4" 1'-5 1/4" (TYP.) ROOF LINE ABOVE 4" FLAT WASHER, 1/2'' STAINLESS STL. LOCK WASHER, 1/2'' STAINLESS STL. HEXNUT, 1/2''-13 STAINLESS STL. PLATE, ALUM. 3/8'' THK 6061-T6 TUBE, RECT, ALUM 3'' X 4'' X .25'' W.T. 6061-T6 1/4 TOP PLATE TO POSTS (TYP.) 7'-7 3/4" 12'-3 1/2" EDGE OF SHOE 3'-3 1/2" CTC 3'-3 1/2" CTC 3'-3 1/2" CTC 11'-8 1/2" CTC BOLT, CARRIAGE, 1/2''-13 X 5'' ROUND HEAD, SQ NECK FULLY THREADED, STAINLESS STL. TUBE, SQ, ALUM. 4'' X .125'' W.T. NAILER, TUBE, RECT, ALUM 1'' X 2'' X .125'' W.T. (6063-T5) MBCI CRAFTSMAN SB STANDING SEAM ROOF SYSTEM ROOF PERIMETER TUBE, RECT, ALUM 2'' X 6'' X .25'' W.T. RAIN GUTTER BOW, TUBE, RECT, ALUM 1'' X 2'' X .125'' W.T. (6063-T5) 2" MIN. EMBEDMENT 7" 7" 1/4" TYP. 9/16" 7" 5" 1/4" TYP. 9/16" BOLT 1/2" -13 X 3-1/2" STN. STL. HEXNUT, 1/2"-13, STN. STL. TOP LOCKING PLATE, ALUM, 1/4" THK (6061-T651) 12" TALL ANCHOR HILTI KWIK BOLT TZ 1/2" X 3-3/4" ZINC (TYP.) PLATE, ALUM. 3/8" THK (6061-T6) PLATE, ALUM. 3/8" THK 6061-T6 PLATE, ALUM. 3/8" THK 6061-T6 17'-0" 10'-0" CONCRETE SLAB, 2500 PSI REVISION HISTORY ZONE REV DESCRIPTION DATE APPROVED 9/16" DRAIN HOLES (9 PLACES IN REAR) CENTER PANEL 1/8" TYP. 1/8" TYP. RAL #9005 JET BLACK (WALL WELDMENTS, SHOES, & ROOF WELDMENT) ROOF SYSTERM TO BE PAINTED AS FOLLOWS: TOP & RAIN GUTTER: 049/90620 - COPPER GL/METR BOTTOM: RAL #9003 SIGNAL WHITE SH, ALUM, .125'' THK (5052-H32) SH, ALUM, .125'' (5052-H32)