18 ct-1 (ppe)
•Download as DOCX, PDF•
0 likes•21 views
This document contains instructions and questions for a power plant engineering exam, including asking students to: list 5 sources of electricity generation worldwide; describe drawbacks of wind power; define prime mover and list examples in Bangladesh; convert a calorific value from kcal/kg to MJ/kg; and list advantages of liquid fuels over solid fuels.
Report
Share
Report
Share
![Time: 20 minutes Total Marks: 20
Name:M ID: MM
1. Write down at least five names of the sources of energy being used for production of
electricity in different parts of the world.
[3]
2. Write down the drawbacks of the wind power? [3]
3. What is a prime mover? Write down the names of prime movers being used in
Bangladesh.
[5]
UNITED INTERNATIONAL UNIVERSITY (UIU)
Dept. of Electrical & Electronic Engineering
Trimester: Summer 2018
Course No: EEE 471 Title: Power Plant Engineering
CT-1 (Date administered: 04 July 2018)
Section: A](https://image.slidesharecdn.com/18-ct-1ppe-180726135713/85/18-ct-1-ppe-1-320.jpg)
![4. Calorific value of Anthracite coal is 8,500 kcal/kg. What is the corresponding value if
expressed in MJ/kg? (Please show the conversion steps).
[3]
5. Write down the advantages of liquid fuels over the solid fuels. [6]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Infrastructure carbon data
The Heathrow Third Runway Project decision has been deemed illegal on climate change grounds (at Feb 2020). A few data points based on published carbon and cost estimates are plotted to consider the validity of this decision.
Coal gasification
The document discusses coal gasification in India, noting that while coal is abundant, Indian coal typically has low calorific value and high inorganic impurities, posing challenges for gasification. It also notes that current underground coal gasification technology restricts the use of coal with over 30% ash content. Additionally, India's NITI Aayog has formed a technical committee to discuss converting domestic coal into energy and chemicals via suitable gasification technologies.
Renewable or Fossil Fuel Energy in Considering on Environmental and Economics...
This slide shows the issues of energy resources in Cambodia in term of economics and environmental consideration.
Primary energy source( nuclear energy)
This document discusses the advantages and disadvantages of nuclear fuel (uranium) energy. It notes that uranium energy is environmentally friendly as it does not emit greenhouse gases, is powerful and efficient compared to other energy sources, and can produce energy reliably. However, it also has disadvantages, such as accidents like Fukushima, the difficulty of managing radioactive waste, limited global quantities, restrictions on import/export, and safety issues.
SPLC 2019 Summit: Supply Chain Transparency Is Now a Business Imperative: Imp...
Slides from Suzanne Greene, Program Manager MIT Sustainable Supply Chains, MIT, presented at the Sustainable Purchasing Leadership Council’s 2019 Summit in Portland, OR.
Oil reserve charts
We are dependent on oil as an energy source, but there is debate around how much oil remains. Projections show global oil production peaking between now and 2050, then declining. However, others argue peak oil theory is flawed and oil reserves could last longer if production increases as new extraction methods are developed. Accurately forecasting future oil supply is challenging and has important implications for energy and policy decisions.
Jon Gibbins speaks at UK-China (Guangdong) CCUS Centre Carbon Capture Ready (...
Jon Gibbins speaks at UK-China (Guangdong) CCUS Centre Carbon Capture Ready (...UK Carbon Capture and Storage Research Centre
Jon Gibbins speaks at UK-China (Guangdong) CCUS Centre Carbon Capture Ready (CCR) Report launch for the China Resources Power (Haifeng) Units 3 and 4, 2 x 1000MW Ultra-supercritical Coal-fired Plants, in Guangzhou on 19 March 2015Green Hydrogen: Plans Potential and Future Outlook
This document summarizes the potential for green hydrogen production and financing of green hydrogen projects globally. Key points include:
- Green hydrogen production costs are falling rapidly due to declines in renewable energy and electrolyzer costs. Several countries and regions have set targets for hydrogen below $2/kg by 2030.
- Over 60 large-scale green hydrogen projects have been proposed globally, requiring $84 billion in investment. By February 2021, over 200 projects were under consideration, totaling over $300 billion in planned investments.
- Early commercial green hydrogen projects are starting up in Europe and other regions, co-located with renewable energy and existing industrial facilities to promote blending and offtake.
- Financing green hydrogen projects
Recommended
Infrastructure carbon data
The Heathrow Third Runway Project decision has been deemed illegal on climate change grounds (at Feb 2020). A few data points based on published carbon and cost estimates are plotted to consider the validity of this decision.
Coal gasification
The document discusses coal gasification in India, noting that while coal is abundant, Indian coal typically has low calorific value and high inorganic impurities, posing challenges for gasification. It also notes that current underground coal gasification technology restricts the use of coal with over 30% ash content. Additionally, India's NITI Aayog has formed a technical committee to discuss converting domestic coal into energy and chemicals via suitable gasification technologies.
Renewable or Fossil Fuel Energy in Considering on Environmental and Economics...
This slide shows the issues of energy resources in Cambodia in term of economics and environmental consideration.
Primary energy source( nuclear energy)
This document discusses the advantages and disadvantages of nuclear fuel (uranium) energy. It notes that uranium energy is environmentally friendly as it does not emit greenhouse gases, is powerful and efficient compared to other energy sources, and can produce energy reliably. However, it also has disadvantages, such as accidents like Fukushima, the difficulty of managing radioactive waste, limited global quantities, restrictions on import/export, and safety issues.
SPLC 2019 Summit: Supply Chain Transparency Is Now a Business Imperative: Imp...
Slides from Suzanne Greene, Program Manager MIT Sustainable Supply Chains, MIT, presented at the Sustainable Purchasing Leadership Council’s 2019 Summit in Portland, OR.
Oil reserve charts
We are dependent on oil as an energy source, but there is debate around how much oil remains. Projections show global oil production peaking between now and 2050, then declining. However, others argue peak oil theory is flawed and oil reserves could last longer if production increases as new extraction methods are developed. Accurately forecasting future oil supply is challenging and has important implications for energy and policy decisions.
Jon Gibbins speaks at UK-China (Guangdong) CCUS Centre Carbon Capture Ready (...
Jon Gibbins speaks at UK-China (Guangdong) CCUS Centre Carbon Capture Ready (...UK Carbon Capture and Storage Research Centre
Jon Gibbins speaks at UK-China (Guangdong) CCUS Centre Carbon Capture Ready (CCR) Report launch for the China Resources Power (Haifeng) Units 3 and 4, 2 x 1000MW Ultra-supercritical Coal-fired Plants, in Guangzhou on 19 March 2015Green Hydrogen: Plans Potential and Future Outlook
This document summarizes the potential for green hydrogen production and financing of green hydrogen projects globally. Key points include:
- Green hydrogen production costs are falling rapidly due to declines in renewable energy and electrolyzer costs. Several countries and regions have set targets for hydrogen below $2/kg by 2030.
- Over 60 large-scale green hydrogen projects have been proposed globally, requiring $84 billion in investment. By February 2021, over 200 projects were under consideration, totaling over $300 billion in planned investments.
- Early commercial green hydrogen projects are starting up in Europe and other regions, co-located with renewable energy and existing industrial facilities to promote blending and offtake.
- Financing green hydrogen projects
communication theory
The document discusses mobile and cellular communications. It describes the basic components of a cellular network including the base station, mobile phone, and how duplexing allows bidirectional communication over separate frequencies. It then provides details on the architecture of GSM networks, including the mobile station (mobile equipment and SIM card), base station subsystem (BTS, BSC, TRAU), network switching subsystem (MSC, VLR, HLR, EIR), and introduces the UMTS network architecture.
Commercially feasible low cost led driver circuit (15 watt)
This document describes a student capstone project to design a commercially feasible LED driver circuit of less than 15 watts. The project members are listed. The existing LED driver models have low efficiency and poor power factor and high import costs. The goals of this project are to design a higher efficiency driver using an IC with active power factor correction and protections. In the second trimester, the team powered up the IC, designed a preliminary circuit, and developed a working prototype. Their design uses a buck topology for higher efficiency and power factor compared to existing models.
Commercially feasible low cost led driver circuit (15 watt)
This document summarizes a student project to design a commercially feasible LED driver circuit that uses less than 15 watts of power. The project aims to create a circuit with 90% efficiency, 0.9 power factor, and the lowest possible cost. It will explore buck converter and capacitive power supply topologies, with buck converter selected for its higher efficiency and reliability for low voltages. The team will use a VIPer22A IC to control the switching frequency of the buck converter. Their work aligns with UN Sustainable Development Goal 9 of promoting sustainable industrialization through innovative research.
Commercially feasible low cost led driver circuit (15 watt)
The document presents the design of a low-cost, locally producible LED driver circuit with high efficiency. The circuit was designed to have low manufacturing costs, comparable efficiency to existing products (up to 80%), and long lifespan. It operates on 220-230V AC input and outputs 61V DC to power LED lights. The circuit design, component values, prototype development, cost analysis, and technical specifications are described. The conclusions discuss the circuit's commercial feasibility for household lighting applications due to its low price, high power factor, and increased efficiency compared to existing solutions.
Commercially feasible low cost led driver circuit (15 watt)
This document summarizes a student capstone project to design a commercially feasible LED driver circuit of less than 15 watts. The project was completed by a group of 4 students. Their design focused on creating a low-cost circuit that maintains constant current and monitors temperature. Their buck converter topology achieved 72.4% efficiency, lower than existing flyback designs, at a manufacturing cost of 34.7 Taka per unit. Future work could focus on increasing efficiency further and adding smart features like sensors.
Commercially feasible low cost led driver circuit (15 watt)
This report represents a new locally producible commercially feasible LED driver circuit which has low components import and production cost, and high market value and a relatively long life. This LED driver is also able to provide as much light and efficiency as the models available at market right now. The main task is to design the device for mass production. So, the team designed the whole device and other parameters. This paper presents the method, costing and working principle of the device.
Commercially feasible low cost led driver circuit (15 watt).1
This report represents a new locally producible commercially feasible LED driver circuit which has low components import and production cost, and high market value and a relatively long life. This LED driver is also able to provide as much light and efficiency as the models available at market right now. The main task is to design the device for mass production. So, the team designed the whole device and other parameters. This paper presents the method, costing and working principle of the device.
Commercially feasible low cost LED driver circuit (15 watt)
This report represents a new locally producible commercially feasible LED driver circuit which has low components import and production cost, and high market value and a relatively long life. This LED driver is also able to provide as much light and efficiency as the models available at market right now. The main task is to design the device for mass production. So, the team designed the whole device and other parameters. This paper presents the method, costing and working principle of the device.
Wh pwr systems
The document discusses the major systems and components of a pressurized water reactor (PWR) nuclear power plant. There are two main systems - the primary system which transfers heat from the reactor fuel to steam generators, and the secondary system which uses this heat to generate steam and power the turbine. The primary system consists of the reactor vessel, steam generators, reactor coolant pumps, pressurizer and connecting piping. It transfers heat from the fuel to create steam in the steam generators to power the turbine. There are over 100 support systems to enable these functions, as well as emergency systems to handle accidents.
18 ct-2 (ppe)
This document contains a 4 question test on power plant engineering. The questions cover: 1) Classifying power generating stations by the form of energy converted to electrical energy. 2) Listing four advantages of hydro power plants. 3) Calculating the total energy available in kWh from a hydroelectric station supplied from a reservoir with a given capacity and head, with 80% efficiency. 4) Calculating the generating capacity and yearly output of a hydroelectric project with a given minimum runoff and head, assuming 85% efficiency.
Transformer: Introduction, development, uses and calculations
Transformer: Introduction, development, uses and calculations.
This slide was made as a class presentation.
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcDigital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
More Related Content
More from Muhammad Ragib Noor
communication theory
The document discusses mobile and cellular communications. It describes the basic components of a cellular network including the base station, mobile phone, and how duplexing allows bidirectional communication over separate frequencies. It then provides details on the architecture of GSM networks, including the mobile station (mobile equipment and SIM card), base station subsystem (BTS, BSC, TRAU), network switching subsystem (MSC, VLR, HLR, EIR), and introduces the UMTS network architecture.
Commercially feasible low cost led driver circuit (15 watt)
This document describes a student capstone project to design a commercially feasible LED driver circuit of less than 15 watts. The project members are listed. The existing LED driver models have low efficiency and poor power factor and high import costs. The goals of this project are to design a higher efficiency driver using an IC with active power factor correction and protections. In the second trimester, the team powered up the IC, designed a preliminary circuit, and developed a working prototype. Their design uses a buck topology for higher efficiency and power factor compared to existing models.
Commercially feasible low cost led driver circuit (15 watt)
This document summarizes a student project to design a commercially feasible LED driver circuit that uses less than 15 watts of power. The project aims to create a circuit with 90% efficiency, 0.9 power factor, and the lowest possible cost. It will explore buck converter and capacitive power supply topologies, with buck converter selected for its higher efficiency and reliability for low voltages. The team will use a VIPer22A IC to control the switching frequency of the buck converter. Their work aligns with UN Sustainable Development Goal 9 of promoting sustainable industrialization through innovative research.
Commercially feasible low cost led driver circuit (15 watt)
The document presents the design of a low-cost, locally producible LED driver circuit with high efficiency. The circuit was designed to have low manufacturing costs, comparable efficiency to existing products (up to 80%), and long lifespan. It operates on 220-230V AC input and outputs 61V DC to power LED lights. The circuit design, component values, prototype development, cost analysis, and technical specifications are described. The conclusions discuss the circuit's commercial feasibility for household lighting applications due to its low price, high power factor, and increased efficiency compared to existing solutions.
Commercially feasible low cost led driver circuit (15 watt)
This document summarizes a student capstone project to design a commercially feasible LED driver circuit of less than 15 watts. The project was completed by a group of 4 students. Their design focused on creating a low-cost circuit that maintains constant current and monitors temperature. Their buck converter topology achieved 72.4% efficiency, lower than existing flyback designs, at a manufacturing cost of 34.7 Taka per unit. Future work could focus on increasing efficiency further and adding smart features like sensors.
Commercially feasible low cost led driver circuit (15 watt)
This report represents a new locally producible commercially feasible LED driver circuit which has low components import and production cost, and high market value and a relatively long life. This LED driver is also able to provide as much light and efficiency as the models available at market right now. The main task is to design the device for mass production. So, the team designed the whole device and other parameters. This paper presents the method, costing and working principle of the device.
Commercially feasible low cost led driver circuit (15 watt).1
This report represents a new locally producible commercially feasible LED driver circuit which has low components import and production cost, and high market value and a relatively long life. This LED driver is also able to provide as much light and efficiency as the models available at market right now. The main task is to design the device for mass production. So, the team designed the whole device and other parameters. This paper presents the method, costing and working principle of the device.
Commercially feasible low cost LED driver circuit (15 watt)
This report represents a new locally producible commercially feasible LED driver circuit which has low components import and production cost, and high market value and a relatively long life. This LED driver is also able to provide as much light and efficiency as the models available at market right now. The main task is to design the device for mass production. So, the team designed the whole device and other parameters. This paper presents the method, costing and working principle of the device.
Wh pwr systems
The document discusses the major systems and components of a pressurized water reactor (PWR) nuclear power plant. There are two main systems - the primary system which transfers heat from the reactor fuel to steam generators, and the secondary system which uses this heat to generate steam and power the turbine. The primary system consists of the reactor vessel, steam generators, reactor coolant pumps, pressurizer and connecting piping. It transfers heat from the fuel to create steam in the steam generators to power the turbine. There are over 100 support systems to enable these functions, as well as emergency systems to handle accidents.
18 ct-2 (ppe)
This document contains a 4 question test on power plant engineering. The questions cover: 1) Classifying power generating stations by the form of energy converted to electrical energy. 2) Listing four advantages of hydro power plants. 3) Calculating the total energy available in kWh from a hydroelectric station supplied from a reservoir with a given capacity and head, with 80% efficiency. 4) Calculating the generating capacity and yearly output of a hydroelectric project with a given minimum runoff and head, assuming 85% efficiency.
Transformer: Introduction, development, uses and calculations
Transformer: Introduction, development, uses and calculations.
This slide was made as a class presentation.
More from Muhammad Ragib Noor (11)
Commercially feasible low cost led driver circuit (15 watt)
Commercially feasible low cost led driver circuit (15 watt)
Commercially feasible low cost led driver circuit (15 watt)
Commercially feasible low cost led driver circuit (15 watt)
Commercially feasible low cost led driver circuit (15 watt)
Commercially feasible low cost led driver circuit (15 watt)
Commercially feasible low cost led driver circuit (15 watt)
Commercially feasible low cost led driver circuit (15 watt)
Commercially feasible low cost led driver circuit (15 watt)
Commercially feasible low cost led driver circuit (15 watt)
Commercially feasible low cost led driver circuit (15 watt).1
Commercially feasible low cost led driver circuit (15 watt).1
Commercially feasible low cost LED driver circuit (15 watt)
Commercially feasible low cost LED driver circuit (15 watt)
Transformer: Introduction, development, uses and calculations
Transformer: Introduction, development, uses and calculations
Recently uploaded
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcDigital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdWalmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
Recently uploaded (20)
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
18 ct-1 (ppe)
- 1. Time: 20 minutes Total Marks: 20 Name:M ID: MM 1. Write down at least five names of the sources of energy being used for production of electricity in different parts of the world. [3] 2. Write down the drawbacks of the wind power? [3] 3. What is a prime mover? Write down the names of prime movers being used in Bangladesh. [5] UNITED INTERNATIONAL UNIVERSITY (UIU) Dept. of Electrical & Electronic Engineering Trimester: Summer 2018 Course No: EEE 471 Title: Power Plant Engineering CT-1 (Date administered: 04 July 2018) Section: A
- 2. 4. Calorific value of Anthracite coal is 8,500 kcal/kg. What is the corresponding value if expressed in MJ/kg? (Please show the conversion steps). [3] 5. Write down the advantages of liquid fuels over the solid fuels. [6]