(1). Which of the following is not legislation that has impacted supply management in the United States? (a). Caustic Waste Superfund Cleanup Act, (b). Clean Air Act, (c). Superfund Law, (d). Resource Conservation Recovery Act (RCRA). (2). When all or part of a shipment received from a supplier is nonconforming, the buyer has the right under the UCC to all of the following except: (a). Hold the material for future determination, (b). Repair the material, (c). Use the material as is, (d). Completely or partially reject the material. (3). Which of the following bullets in the list does not reflect a Global Sullivan Principle? (a). Express support for universal human rights, (b). Promote equal opportunity, (c). Respect voluntary freedom of association, (d). Use bribery in foreign countries when necessary and ethical acceptable based on cultural customs. (4). Which of the following is not a typical prerequisite to successful cross-functional teams? (a). Executive sponsorship, (b). Qualified team members, (c). Adequate time, (d). Overtime hours, (e). Inter-firm teams. (5). Which of the following points does not describe part of the evolution of quality management? (a). Prior to 1980s, the gurus of quality influenced corporate disciples, (b). The corporate disciples in turn influenced corporate philosophies that increased the importance of quality management, (c). The corporate disciples influenced the quality gurus, (d). The corporate philosophy has essentially driven the selection of a management system. (6). Which of the following is not one of Deming’s fourteen points? (a). Improve constantly and forever the system of production and service, (b). Institute training on the job, (c). Adopt and institute modern methods of supervision & leadership, (d). Use inspection to ensure zero defects. (7). Which of the following is not a key law or regulation that impacts supply management in the USA? (a). Uniform Commercial Code, (b). The Clinton Act, (c). The Clayton Act, (d). The Robinson-Patman Act. (8). A purchase contract must have certain considerations to be legal. Which of the following is not one of these considerations? (a). Agreement, (b). Signers must be over 21, (c). Consideration, or mutual obligation, (d). Competent parties. (9). Which of the following issues are not addressed by the Contracts for the International Sale of Goods (CISG)? (a). Acceptance of an offer, (b). Contract price, (c). Revocation of an offer, (d). Language used in written contract. (10). Which of the following is not a recognized quality management approach? (a). Total Quality Management (TQM), (b). Continuous Improvement, (c). Six Sigma. (d). Quality Ensured in the Supply Triangle (QEST). (11). Which of the following is not one of the seven wastes? ...

1. (1). Which of the following is not legislation that has impacted
supply management in the United
States?
(a). Caustic Waste Superfund Cleanup Act,
(b). Clean Air Act,
(c). Superfund Law,
(d). Resource Conservation Recovery Act (RCRA).
(2). When all or part of a shipment received from a supplier is
nonconforming, the buyer has the right
under the UCC to all of the following except:
(a). Hold the material for future determination,
(b). Repair the material,
(c). Use the material as is,
(d). Completely or partially reject the material.
(3). Which of the following bullets in the list does not reflect a
Global Sullivan Principle?
(a). Express support for universal human rights,
(b). Promote equal opportunity,
(c). Respect voluntary freedom of association,

2. (d). Use bribery in foreign countries when necessary and
ethical acceptable based on
cultural customs.
(4). Which of the following is not a typical prerequisite to
successful cross-functional teams?
(a). Executive sponsorship,
(b). Qualified team members,
(c). Adequate time,
(d). Overtime hours,
(e). Inter-firm teams.
(5). Which of the following points does not describe part of the
evolution of quality management?
(a). Prior to 1980s, the gurus of quality influenced corporate
disciples,
(b). The corporate disciples in turn influenced corporate
philosophies that increased the
importance of quality management,

3. (c). The corporate disciples influenced the quality gurus,
(d). The corporate philosophy has essentially driven the
selection of a management system.
(6). Which of the following is not one of Deming’s fourteen
points?
(a). Improve constantly and forever the system of production
and service,
(b). Institute training on the job,
(c). Adopt and institute modern methods of supervision &
leadership,
(d). Use inspection to ensure zero defects.
(7). Which of the following is not a key law or regulation that
impacts supply management in the
USA?
(a). Uniform Commercial Code,
(b). The Clinton Act,
(c). The Clayton Act,

4. (d). The Robinson-Patman Act.
(8). A purchase contract must have certain considerations to be
legal. Which of the following is not
one of these considerations?
(a). Agreement,
(b). Signers must be over 21,
(c). Consideration, or mutual obligation,
(d). Competent parties.
(9). Which of the following issues are not addressed by the
Contracts for the International Sale of
Goods (CISG)?
(a). Acceptance of an offer,
(b). Contract price,
(c). Revocation of an offer,
(d). Language used in written contract.

5. (10). Which of the following is not a recognized quality
management approach?
(a). Total Quality Management (TQM),
(b). Continuous Improvement,
(c). Six Sigma.
(d). Quality Ensured in the Supply Triangle (QEST).
(11). Which of the following is not one of the seven wastes?
(a). All processing,
(b). Overproduction,
(c). Unneeded motion,
(d). Unneeded transportation.
(12). Which of the following is not a quality award?
(a). Malcolm Baldridge Award,
(b). European Quality Award,

6. (c). ISO 9000,
(d). Deming Prize.
(13). In the investigation phase, the development of
alternatives encompasses all of the following
consideration, except one. Which does not belong to the
list?
(a). Value analysis,
(b). Suitability,
(c). Producibility,
(d). Component availability.
(14). Which of the following is not associated with the
development phase of the design process?
(a). Development of prototypes,
(b). Design reviews,
(c). Qualification testing,
(d). Value analysis.

7. (15). Which of the following is not true about risk sharing in
government contracts?
(a). Government usually wants the seller to assume all
technical and cost risk,
(b). In situations where the risk if high, the supplier must add
large contingency sums in the
price,
(c). Government supply managers should consider sharing the
risk cost through reimbursement
and/or incentive contracts,
(d). Government supply managers should consider sharing the
risk cost through fixed firm
Contracts.
(16). Which of the following is generally not true about
government contracts?
(a). The contract may be terminated for default,
(b). The contract may be terminated for not fulfilling the terms
of the contract,

8. (c). The government may not terminate a contract for its
convenience,
(d). The government may debar, suspend, or declare ineligible
an errant contractor.
(17). Which of the following does not fit within the code of
ethics for government service?
(a). Make private promises only when needed,
(b). Engage in business with the Government,
(c). Never use any information gained confidentially in the
performance of Government duties
as a means for making private profit,
(d). Expose corruption wherever discovered.
(18). Which of the following activities is typically not
conducted in the production phase of the design
process?
(a). Process Control,

9. (b). Material Availability Research,
(c). In Process & Final Testing,
(d). Adjust and calibrate the performance.
(19). Which of the following questions does not typically
belong on a value-engineering checklist?
(a). Can the item be eliminated?,
(b). Can the product quality be lowered to reach a lower price
point?,
(c). If the item is not standard, can a standard item be used?,
(d). If it is a standard item, does it completely fit the
application, or is it a misfit?
(20). All of the following are considerations when assessing
technical risk except:
(a). Type and complexity of the item or service,
(b). Supply and demand patterns of the marketplace,
(c). Stability of design specifications or statement of work,

10. (d). Availability of historical pricing data.
(21). In the PDCA Cycle the D stands for which of the
following?
(a). Document,
(b). Do,
(c). Develop,
(d). Describe.
(22). Which of the following is not one of the seven wastes as
interpreted by Honda?
(a). Waste in the Work Itself,
(b). Process Time,
(c). Inventory,
(d). Wasted Operator Movement.
(23). Which of the following is not a class of manufacturing
inventory?

11. (a). Raw Materials,
(b). Finished Goods,
(c). In-process Goods,
(d). Stored Materials.
(24). A listing of Intermediate Predecessor activities is
important information in a Single Time Estimate
CPM analysis for which of the following reasons?
(a). It makes it possible to understand the relationship of the
CPM network of activities,
(b). It provides useful timing information,
(c). It includes cost information,
(d). It is the probability information in the final step of the
CPM.
(25). In an MRP program, the program accesses the status of
any file in specific time periods called
which of the following?
(a). Cubed time units,

12. (b). Time buckets,
(c). BOM units,
(d). Modular units.
PAGE
4