Shirell James on the Intelligent Supply solution; supplier collaboration that combines planning, execution, fulfillment, collaboration and business intelligence into a single cloud-based solution for companies and their entire supply network. With end-to-end visibility and automatic supply-demand synchronization, this solution delivers results unlike any other on the market.
Learn more about this real-time supplier collaboration solution: http://bit.ly/supplier-collaboration
Shirell James on the Intelligent Supply solution; supplier collaboration that combines planning, execution, fulfillment, collaboration and business intelligence into a single cloud-based solution for companies and their entire supply network. With end-to-end visibility and automatic supply-demand synchronization, this solution delivers results unlike any other on the market.
Learn more about this real-time supplier collaboration solution: http://bit.ly/supplier-collaboration
Esperienze di migrazione all'Open Source: l'Ente di Gestione del Parco delle ...Rachele Muscarà
Le ragioni, lo sviluppo, gliostacoli e le prostettive furute del processo di migrazione ai software open source.L'esperienza di un ente ente di piccole dimensioni.
In my talk, I will show the results of the past 2 years as a RF in the ACT
and in TEC-QEE. I will talk about the preservation of vitamin A in a
polymeric system in order to expand its lifetime for future long-term
missions to Mars. I will also focus on contamination of sensitive surfaces
and present ideas of how to avoid contamination.
Influence of Thickness on Electrical and Structural Properties of Zinc Oxide ...paperpublications3
Abstract: Zinc Oxide (ZnO) thin films were prepared on corning (7059) glass substrates at a thickness of 75.5 and 130.5nm by RF sputtering technique. The deposition was carried out at room temperature after which the samples were annealed in open air at 1500C. The electrical and structural properties of these films were studied. The electrical properties of the films were monitored by four-point probe method while the structural properties were studied by X-ray diffraction (XRD). It was found that the electrical resistance of the films decreases with increase in the thickness of the films. The XRD analysis of the films showed that the films have a peak located at 〖34.31^0-34.35〗^0with hkl (002). Other parameters calculated include the stress ( ) and the grain size (D).
Fabrication of microfluidic channels in glass and siliconYichen Sun
Microfluidic channels in glass and silicon chips are fabricated in the cleanroom. Their acoustic focusing properties are then tested and reported in this project report (MEMS 5801).
Research Inventy : International Journal of Engineering and Science is published by the group of young academic and industrial researchers with 12 Issues per year. It is an online as well as print version open access journal that provides rapid publication (monthly) of articles in all areas of the subject such as: civil, mechanical, chemical, electronic and computer engineering as well as production and information technology. The Journal welcomes the submission of manuscripts that meet the general criteria of significance and scientific excellence. Papers will be published by rapid process within 20 days after acceptance and peer review process takes only 7 days. All articles published in Research Inventy will be peer-reviewed.
Solutions to Address Osmosis and the Blistering of Liquid-Applied Waterproofi...RDH Building Science
Waterproofing membranes are widely used in the building industry as a barrier for water entry into a building enclosure. Over the past two decades, waterproofing system failure due to osmotic blistering has occurred in some protected membrane/inverted roofing assemblies. Not all waterproofing membrane assemblies are at risk for this process and the authors have developed a test protocol to establish the relative risk level of waterproofing membranes to osmosis. Using this protocol, the osmotic flow rate of SBS, hot rubberized asphalt, PMMA, EPDM, TPO, HDPE, polyurea, asphalt emulsion, asphalt-modified polyurethane, and various other 2-component cold applied membranes was measured to determine a threshold osmotic flow rate for low risk waterproofing membrane systems.
In this research, a wide range of osmotic flow rates were obtained for the various membrane types. Most asphalt-modified polyurethane membranes consistently exhibit osmotic flow rates significantly higher than the low-risk threshold of ~0.0 g/m²/day (typically 1.4 to over 20 g/m²/day) after data corrections, which results in osmotic blistering and premature membrane failures. Some polyurea and asphalt emulsion membranes have flow rates above 2.0 g/m²/day with unknown long-term performance, while most other membranes that were tested have flow rates around 0.0 g/m²/day after data corrections from control samples. To reduce the potential for osmotic blistering over concrete, it is recommended that waterproofing membranes used in inverted roofing assemblies should have an osmotic flow rate near 0.0 g/m²/day when tested using the methodology herein, an inverted wet cup vapour permeance less than that of the substrate (i.e. <0.1 US Perms on a concrete substrate), and minimal long-term water absorption.
Presented at the 15th Canadian Conference on Building Science and Technology.
Esperienze di migrazione all'Open Source: l'Ente di Gestione del Parco delle ...Rachele Muscarà
Le ragioni, lo sviluppo, gliostacoli e le prostettive furute del processo di migrazione ai software open source.L'esperienza di un ente ente di piccole dimensioni.
In my talk, I will show the results of the past 2 years as a RF in the ACT
and in TEC-QEE. I will talk about the preservation of vitamin A in a
polymeric system in order to expand its lifetime for future long-term
missions to Mars. I will also focus on contamination of sensitive surfaces
and present ideas of how to avoid contamination.
Influence of Thickness on Electrical and Structural Properties of Zinc Oxide ...paperpublications3
Abstract: Zinc Oxide (ZnO) thin films were prepared on corning (7059) glass substrates at a thickness of 75.5 and 130.5nm by RF sputtering technique. The deposition was carried out at room temperature after which the samples were annealed in open air at 1500C. The electrical and structural properties of these films were studied. The electrical properties of the films were monitored by four-point probe method while the structural properties were studied by X-ray diffraction (XRD). It was found that the electrical resistance of the films decreases with increase in the thickness of the films. The XRD analysis of the films showed that the films have a peak located at 〖34.31^0-34.35〗^0with hkl (002). Other parameters calculated include the stress ( ) and the grain size (D).
Fabrication of microfluidic channels in glass and siliconYichen Sun
Microfluidic channels in glass and silicon chips are fabricated in the cleanroom. Their acoustic focusing properties are then tested and reported in this project report (MEMS 5801).
Research Inventy : International Journal of Engineering and Science is published by the group of young academic and industrial researchers with 12 Issues per year. It is an online as well as print version open access journal that provides rapid publication (monthly) of articles in all areas of the subject such as: civil, mechanical, chemical, electronic and computer engineering as well as production and information technology. The Journal welcomes the submission of manuscripts that meet the general criteria of significance and scientific excellence. Papers will be published by rapid process within 20 days after acceptance and peer review process takes only 7 days. All articles published in Research Inventy will be peer-reviewed.
Solutions to Address Osmosis and the Blistering of Liquid-Applied Waterproofi...RDH Building Science
Waterproofing membranes are widely used in the building industry as a barrier for water entry into a building enclosure. Over the past two decades, waterproofing system failure due to osmotic blistering has occurred in some protected membrane/inverted roofing assemblies. Not all waterproofing membrane assemblies are at risk for this process and the authors have developed a test protocol to establish the relative risk level of waterproofing membranes to osmosis. Using this protocol, the osmotic flow rate of SBS, hot rubberized asphalt, PMMA, EPDM, TPO, HDPE, polyurea, asphalt emulsion, asphalt-modified polyurethane, and various other 2-component cold applied membranes was measured to determine a threshold osmotic flow rate for low risk waterproofing membrane systems.
In this research, a wide range of osmotic flow rates were obtained for the various membrane types. Most asphalt-modified polyurethane membranes consistently exhibit osmotic flow rates significantly higher than the low-risk threshold of ~0.0 g/m²/day (typically 1.4 to over 20 g/m²/day) after data corrections, which results in osmotic blistering and premature membrane failures. Some polyurea and asphalt emulsion membranes have flow rates above 2.0 g/m²/day with unknown long-term performance, while most other membranes that were tested have flow rates around 0.0 g/m²/day after data corrections from control samples. To reduce the potential for osmotic blistering over concrete, it is recommended that waterproofing membranes used in inverted roofing assemblies should have an osmotic flow rate near 0.0 g/m²/day when tested using the methodology herein, an inverted wet cup vapour permeance less than that of the substrate (i.e. <0.1 US Perms on a concrete substrate), and minimal long-term water absorption.
Presented at the 15th Canadian Conference on Building Science and Technology.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.