Tutorial guide for WMPM

2. 2
 Starting page of the program
• Enter the allocated web address from a chrome website
• Click ‘Start’

3. 3
 Step 1 – Selection of SWMM input file
• Click ‘Search’ to load SWMM input file

4. 4
 Step 1 – Selection of SWMM input file
• Select an input file and click ‘Open’

5. 5
 Step 1 – Selection of SWMM input file
• Click ‘Continue’ on the bottom to go to the next step

6.  Step 2 – Selection of LID type
• Click ‘Search’ to load a SWMM file with LID controls & usages
6

7. 7
 Step 2 – Selection of LID type
• Select an input file for LID type (1) and click open

8. 8
 Step 2 – Selection of LID type
• Select an input file for LID type (2) and click open

9. 9
 Step 2 – Selection of LID type
• Click ‘Continue’ on the bottom to go to the next step

10.  Step 3 – Confirmation of design parameters
• This table shows SWMM5.1 LID control parameters which are related to design
10

11. 11
 Step 3 – Confirmation of design parameters
• Check the first selected SWMM5.1 LID control parameters

12. 12
 Step 3 – Confirmation of design parameters
• Check the second selected SWMM5.1 LID control parameters

13. 13
 Step 4 – Confirmation of planning parameters
• The following table shows SWMM5.1 LID usage parameters which are related to
planning

14. 14
 Step 4 – Confirmation of planning parameters
• Check the first selected SWMM5.1 LID control parameters

15. 15
 Step 4 – Confirmation of planning parameters
• Check the second selected SWMM5.1 LID control parameters

16.  Step 5 – Selection of study subcatchment
• All subcatchments modeled in the loaded SWMM input file in (step 1) will appear
• Select the subcatchments on the left and combined them with the selected LID types
16

17. 17
 Step 5 – Selection of study subcatchment
• Select subcatchment S1, S2, S3, S4
• Click ‘Continue’ on the bottom to go to the next step

18.  Step 6 – Simulation of generated scenarios by SWMM
• WMPM will automatically generate and simulate the SWMM program based on the
selected subcatchments and LID types
18

19.  Step 7 – Comparison of total & peak flow
• This table describes the result of (total flow and peak flow) of each generated scenarios
• It as well shows the total flow before/after LID construction and the changed ratio
19

20. 20
 Step 7 – Comparison of total & peak flow
• Choose which result you want to see (or check) by clicking the scroll button on the
upper right side

21. 21
 Step 7 – Comparison of total & peak flow
• Check the peak flow before/after LID construction and the changed ratio

22. 22
 Step 8 – Prioritization of simulated scenarios
• This table indicates the derived ranking of each generated scenarios based on the
changed ratio

23. 23
 Step 8 – Prioritization of simulated scenarios
• Choose which result you want to see (or check) by clicking the scroll button on the
upper right side

24. 24
 Step 8 – Prioritization of simulated scenarios
• Check the ranking for decreased peak flow of each scenarios

25. 25
 Saving simulated model
• Click ‘Save’ on the upper right side to save the simulation

26. 26
 Saving simulated model
• Enter the save title and click ‘OK’

27. 27
 Saving simulated model
• The checking message will appear, click ‘OK’ to continue

28. 28
 Downloading simulated model
• Click ‘Download’ on the bottom

29. 29
 Downloading simulated model
• A zip file will be downloaded, click the downloaded zip file

30. 30
 Downloading simulated model
• SWMM file loaded in step 1 and generated SWMM files by the selected LID
type/subcatchment can be found

31. 31
 Loading saved files
• Go back to the main menu screen
• Click ‘Select’ to find saved files

32. 32
 Loading saved files
• Choose the file you want to open

33. 33
 Loading saved files
• Click ‘Start’ to continue

34. 34
 Loading saved files
• Step 1 of WMPM will appear
• Click the ‘Step’ you want to use (select step 2)

35. 35
 Loading saved files
• Step 2 of WMPM will appear
• Click the ‘Step’ you want to use (select step 3)

36. 36
 Loading saved files
• Step 3 of WMPM will appear
• Click the ‘Step’ you want to use (select step 4)

37. 37
 Loading saved files
• Step 4 of WMPM will appear
• Click the ‘Step’ you want to use (select step 5)

38. 38
 Loading saved files
• Step 5 of WMPM will appear
• Click ‘continue’ in step 5 to re-generate the scenarios and simulate the model

39. 39
 Loading saved files
• Step 6 of WMPM will appear
• Click the ‘Step’ you want to use (select step 7)

40. 40
 Loading saved files
• Step 7 of WMPM will appear
• Click ‘continue’ in step 7 to re-derive the ranking of each scenarios

41. 41
 Loading saved files
• Step 8 of WMPM will appear