1. Utility Tool™ cable preparation tools are used to splice and terminate cable for the Power Transmission and Distribution,
electrical construction and maintenance industries. All tools are designed and manufacturered to meet specific cable
application needs, including accurate removal of insulation, semi-conductive sheathing, protective jacketing and other
materials to produce consistent, uniform preparation of cable ends for splicing and termination.
WS 76
SEMI-CON Shaving Tool
DISCOVER
TOOL
the benefits of our
Semi Con Shaving
NEW
An Easy to Use, Compact, High Quality
Tool for the Utility Professional
• Designed to shave bonded semi-con.
• Facilitates removal of non bonded semi-con from
older deployed cables.
• Shaves 15-35 KV cable.
• Diameter range over the screen
0.71”-2.36” (18mm-60mm).
• Accurately removes semi-con shield within 25
mm (spiral action) in forward position.
• By reversing the tool, accurately removes
semi-con shield within 7 mm (spiral action).
• Winding pin to remove chip.
• Self feeding with stop position, two speeds
forward and two speeds reverse.
• Accomodates a max semi-con thickness of
3/32 in (2.4 mm).
• Blade provides a 20° chamfer cut finish at
the semi-con end.
• Blade adjustment with 0.004” (0.1 mm)
increments.
• Precision self feeding bearings guide.
• Easy blade replacement without
the need for additional tools.
• Thumb switch to allow spiral to
square cut without requiring a
stop device.
• No need for using messy cable
lubricant.
• Robust, high quality steel and
aluminum construction.
• Patent Pending
• Made in the U.S.A.
• Size: 3.44 in (87.3 mm) x 5.52 in
(140.3 mm) x 2.03 in (51.7 mm).
• Weight: 1 LB (454 g).
• Part Number: 43580, 43560 (Kit
with case), 43577 (spare blade).
You Tube Video
Tel: +44 (0)191 490 1547
Fax: +44 (0)191 477 5371
Email: northernsales@thorneandderrick.co.uk
Website: www.cablejoints.co.uk
www.thorneanderrick.co.uk