3D typical installation drawing from Schiedel. This 3D drawing forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to its termination point above the roof. Support is required for internal and external chimney systems. Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.

1. IGNIS PROTECT
45 DEGREE VERSION
TYPICAL INSTALLATION WITH
DOUBLE MODULE CHIMNEY SYSTEM
Prima Smooth
Stove Pipe
Plasterboard
Plasterboard
Permanent elastic
sealing strip
Timber framework
for Ignis-Protect
Ignis-Protect
45° External version
Vapour barrier membrane
Schiedel Isokern
Double Module System
Insulation
Damp proof barrier
Hearth
Visit www.schiedel.com/uk for more information Part of BMI GROUP