3D typical installation drawing from Schiedel. This 3D drawing forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to its termination point above the roof. Support is required for internal and external chimney systems. Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.

1. Part of BMI GROUP
SCREW FIT RANGE OF TERMINALS
SCREW FIT RANGE OF ADAPTORS
Prima Smooth,
Prima Plus and
Vitreous to
Tecnoflex Plus
TecnoFlex Plus
to Prima Plus
Top insert
Top clamp
This item is used in conjunction with the Top
plate to secure the liner at the top of the stack.
Top plate
This item is used in conjunction with the top
clamp to support the liner at the top of the
stack. Can also be used as a debris plate above
the appliance.
TecnoFlex Plus liner
Available in cut lengths or as packs containing the
top clamp and top plate.
Bottom support
bracket
To secure
TecnoFlex Plus.
Debris plate
(Top plate)
Prima Smooth
or Prima Plus
Terminal Combined screwfit
pot hanger and
terminal
TECNOFLEX
FLEXIBLE LINER WITH LIFETIME GUARANTEE
Visit www.schiedel.com/uk for more information Part of BMI GROUP
LIFETIME GUARANTEE and
SCHIEDEL INSTALLER REWARDS
Register an installation with our
online guarantee registration portal
and earn points to redeem for
Love2Shop vouchers!