This document outlines lockout/tagout procedures for hazardous energy sources. It discusses identifying energy sources for machines, developing an energy control plan, and preventing injury from unexpected startup of equipment. The procedures cover servicing, maintenance, and normal operations. An energy control program includes authorized employees, affected employees, energy control procedures, training, and audits. Detailed steps are provided for preparing equipment for shutdown, isolating energy sources, applying lockout/tagout devices, releasing stored energy, verifying lockouts, and restoring energy. Requirements are outlined for lockout devices, tags, group lockouts, and removing locks.
2. Hazardous energy
sources
• Evaluate machines, equipment,
and processes
• Develop energy control plan
• Look for all sources of energy
• Identify secondary and stored
energy sources
Prepared By | Safety Professional | www.safetygoodwe.com 2
3. Why lockout/tagout is
necessary
To Prevents injury due to
unexpected startup of
equipment or released energy
Prepared By | Safety Professional | www.safetygoodwe.com 3
5. Energy control program
Prepared By | Safety Professional | www.safetygoodwe.com 5
AUTHORIZED
EMPLOYEES
AFFECTED
EMPLOYEES
ENERGY CONTROL
PROCEDURES
TRAINING PERIODIC AUDITS
OTHER
EMPLOYEES
6. Preparation for
shutdown
• Locate all energy sources
• Inform all affected persons
Prepared By | Safety Professional | www.safetygoodwe.com 6
7. Shutdown procedure
Prepared By | Safety Professional | www.safetygoodwe.com 7
Each piece of equipment or machine
must be shutdown according to
written energy control procedures
Orderly shutdown avoids additional
or increased hazards
Use shutdown procedures that are
established for the machine
8. Isolating machinery
from its energy
sources
Prepared By | Safety Professional | www.safetygoodwe.com 8
TYPE OF
DEVICES TO
BE USED
PLACEMENT
OF ISOLATING
DEVICES
10. Releasing stored energy
• Check for and relieve:
• Electrical energy capacitors
• Residual pressure in
lines and pipes
Prepared By | Safety Professional | www.safetygoodwe.com 10
11. Verification procedures
• Verify that all locks and tags are in place
• Try to operate the
equipment
Prepared By | Safety Professional | www.safetygoodwe.com 11
12. Restoring energy to the equipment/machine
Prepared By | Safety Professional | www.safetygoodwe.com 12
Remove tools from the area, replace guards
Ensure that employees are safely positioned or
removed from the area
The employee who applies the lock is the only one
who can remove it
Special requirements for testing and positioning
equipment
13. Lockout devices
Prepared By | Safety Professional | www.safetygoodwe.com 13
Types used
Standardized for easy recognition
Never use someone else’s lockout device
The lock must identify the person who applied it
14. Tags
• Types used
• Standardized for easy
recognition
Prepared By | Safety Professional | www.safetygoodwe.com 14
15. Tags
The attachment means for a
tag must be:
• non-reusable
• attached by hand
• self-locking and non-
reusable with locking
strength of 50 pounds
• equivalent to a one-
piece, all-
environment-tolerant
nylon cable tie
Prepared By | Safety Professional | www.safetygoodwe.com 15
16. Tags
The tag’s legend must include the following types of
statements:
13c
Prepared By | Safety Professional | www.safetygoodwe.com 16
Do Not
Start
Do Not
Open
Do Not
Close
Do Not
Energize
Do Not
Operate
17. Group lockouts
Prepared By | Safety Professional | www.safetygoodwe.com 17
Uses group lockout devices (hasps) to
accommodate all locks
Each authorized employee must affix a personal
lockout or tagout device to the group lockout
device when he/she begins work
Each authorized employee must remove those
devices when he/she stops working on the
machine/equipment
18. Shift Changes
The first employee’s lock remains in place until the next
shift’s employee applies his/her lock
Prepared By | Safety Professional | www.safetygoodwe.com 18
19. Removing a
lock
If an employee is not available to remove a lock, the employer must:
• verify that the employee is not in the facility
• make reasonable efforts to contact the employee
• inform the employee of the removal beforehe/she resumes
work
Prepared By | Safety Professional | www.safetygoodwe.com 19
20. Conclusion.. Its just beginning
QUESTIONS
Prepared By | Safety Professional | www.safetygoodwe.com 20