Microsoft CSP Briefing Pre-Engagement - Questionnaire
Tube burst tester p6 d-mh
1. Tube Burst .
Tube Burst Tester
Suitable to check Internal Pressure Resistance of Sealed Lami-Tubes.
Mode of Operation : Internal Pressure is increased till failure of seal / laminate.
Specifications of Model # P6D-MH
- Digital Model
- Pneumatic Model.
- Manual Start – Automatic Stop function at
sample failure.
- With Digital pressure sensor and Digital Indicator
(Microprocessor Based)
- With embedded Push Button controls on
indicator panel.
- With Dual Line, Backlit, Large LCD display for
comfortable viewing.
- With Peak Hold facility
- With Multiple Measuring Units :
Kg/cm2, p.s.i., kPa (User Settable)
- Range : 0 – 6 Kg/cm2
- Least Count : 0.01 Kg/cm2
- With Acrylic Safety Guard for Operator Protection
- With 3 test adopters (free of cost) as per your tube / cap samples.
Method of Operation :
1) Attach appropriate tube adapter onto the machine.
2) Screw tube into its adapter.
3) Press Start button.
4) The tube will be pressurized internally.
5) As soon as the tube fails, the air will be stopped AUTOMATICALLY. No need to press the Stop button.
6) Note reading on Digital Display.
Utilities Required : a) Compressed Air @ 6 Kg/cm2 from your source.
b) Power : 230 Volts A.C., 50 Hz. Clean power.
Note : Other models also available.